[Q&A] OmniRom 4.4.4 Unofficial Nexus S 4G, Build - 1th July 2014 - Nexus S Q&A, Help & Troubleshooting

Q&A for OmniRom 4.4.4 Unofficial Nexus S 4G, Build - 1th July 2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for OmniRom 4.4.4 Unofficial Nexus S 4G, Build - 1th July 2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Crespo4g (Nexus S 4g) Kernel for 4.4 Roms
I've read amongst the multiple threads that OmniROM 4.4 works well with the Nexus S 4g, and even has gapps working. I've installed both, and am stuck at the boot screen for Omni.
I've let it sit for about 20 minutes, but haven't had anything happen yet. The animated just keeps wiggling its antennas and blinks at me.
It all boils down to the kernel at this point. I had an older kernel from a year or two ago on the phone, and I don't remember which one it was prior to wiping and such. I found one called "crespo_devil_20131025_VC.zip" and put it on, since others were suggesting "GURU" or "Devil" kernels.
Same results. I realize crespo is the GSM version of the phone, but figured I'd give it a shot since I don't use the phone on a phoneplan.
Where can I find a Kernel for crespo4g that is compatible with 4.4?

jackharvest said:
Where can I find a Kernel for crespo4g that is compatible with 4.4?
Click to expand...
Click to collapse
I've described my experience with each of the available kernels in this ROM's main thread (starting here), but I'm currently favoring the Devil kernel you mentioned. I include links to each kernel. There are still a few kernels I've not tried.

Related

[Q&A] |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|

Q&A for |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for |ROM|★SKYFALL★|2.21.605.2|►4.4.3◄|Sep.14.14|. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
4.4.4 firmware
I've just installed the 4.4.4 firmware a.k.a 3.28.605.4 and all seems to be working great.
Sure hope we'll see a 4.4.4 based SkyFall in the near future.
What????!! Our dev left? What's everyone switching to?
Sent from my Verizon M8 running Skyfall
Well, I've heard rumblings that ARHD (Android Revolution HD) v22.x may finally support CDMA HTC One devices now that Verizon 4.4.4 kernel source is out...we will wait and see. I think some folks have been able to flash prior ARHD ROMs but I haven't seen a guide/how-to for CDMA devices anywhere yet. ARHD is a popular ROM and a lot of the philosophies seem similar to Skyfall. Otherwise, there's always CleanROM or (shudder) Viper.
I suppose a lot of us may finally make the switch to a GPE-based ROM in the next few weeks as the Lollipop update is available.
oh no!! I can't believe it!! I was hoping to at least get a Lollipop Update!!
I thank you for all your work @iB4STiD
I really enjoyed it on my M8, now I guess I will have to look for a new close to stock rom for lollipop out there !!!
THANK YOU!!

[Q&A] [KERNEL][ANYKERNEL] pink kernel 20140728

Q&A for [KERNEL][ANYKERNEL] pink kernel 20140728
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ANYKERNEL] pink kernel 20140728. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is it compatible with Moto G LTE (XT1039) ?
How do I enable pocket detect, and what exactly does it do?
Question
Would it be possible to implement "options to disable wake functions with timeout or power button" like in the ElementalX kernel for N5?
Stuck at boot logo when Flashing over Xperience 5.0
Hi,
First: I have flashed this kernel over multiple ROMs (CM11, Xperience 4.4...) and it worked magnificiently, but when I flash it onto any Lollipop ROM (I'm on Xperience's latest build), I get stuck at the boot logo.
I have waited over 20 minutes multiple times, without luck. Could anyone help me?
Really love DT2W, and all the other features!
Second: Whatever ROM I install, the right and left audio channels are inverted.
When I come back to stock, are not switched anymore.
I have searched many forums on this issue, with no success.
Thank you for reading this and/or answering!
[UPDATE] Installed Donkey Kang kernel by pushing through ADB, and It works fine. Would still really like to use PINK kernel.
WLAN / WIFI isn't working
After i installed the kernel i couldn't activate wifi anymore :/ pls help

[Q&A] [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]

Q&A for [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM12 UNOFFICIAL BUILDS by TeamBliss [11-19/Alpha 2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bracketslash said:
New build is up for cm12 with advanced reboot.
cm-12-20141121-180449-blisscm-UNOFFICIAL-m8
https://www.androidfilehost.com/?fid=95784891001614178
Click to expand...
Click to collapse
@bracketslash are you not maintaining build on http://forum.xda-developers.com/ver...ment/cm12-unofficial-unstable-builds-t2941198 anymore?
mulhearn22 said:
@bracketslash are you not maintaining build on http://forum.xda-developers.com/ver...ment/cm12-unofficial-unstable-builds-t2941198 anymore?
Click to expand...
Click to collapse
I believe the d/l link there is the same as here. I will only be discussing here.
Quick general question about lollipop. I noticed in these builds (along with the kang / leak of gpe for the m8) that the ability to separate the notification and ring volumes is not available. Is that capability not available across the board on all lollipop roms on all devices?
One of the compelling reasons for me to use cm over other roms is Profiles. Profiles are in the CM12 builds but so far really don't work as in CM11 due to this limitation.
Thanks.
Sent from my One M8 using Tapatalk
alershka said:
Quick general question about lollipop. I noticed in these builds (along with the kang / leak of gpe for the m8) that the ability to separate the notification and ring volumes is not available. Is that capability not available across the board on all lollipop roms on all devices?
One of the compelling reasons for me to use cm over other roms is Profiles. Profiles are in the CM12 builds but so far really don't work as in CM11 due to this limitation.
Thanks.
Sent from my One M8 using Tapatalk
Click to expand...
Click to collapse
Keep in mind we JUST got lollipop source, certain features will take time to add back in. This is EXTREMELY early in development so please just bear with us while we attempt to get everything back up to speed.
Using CM12.1 and was referred to this thread. I use it as my daily driver and am against using MultiROM because it's a pain sometimes. Anyone else using 12.1 Sept-01-2015 build? Curious to know if you have a 3rd party kernel and which one?
Sent from my m8wl using Tapatalk
How long until CM12 is compatible with project fi

[Q&A] [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/

[Q&A] [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/
Q&A for [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/1/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][MOD]OnePlus One Official AOSP Unofficially flappified! v4.4.4 Updated 9/1/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I tried clean flash..
Device just kept rebooting. I think its a radio or carrier issues. When ever my bars come upbas connected on tmoible it reboots the phone. Seems to work for about 20-40 seconds before that point. Did clean flash wiped internal storage just to check. Well tried everything I couod think of.... Any suggestions would be great.
I see that I'm not the one, who has problems with bootloop. I have tried the aosp rom from Jamal2367 and then this rom, after flashing both rooms my device does a reboot while booting or if I have luck in the language settings :/ does anyone have an idea, how to fix it?
P.S. I have already tried different versions of TWRP... wiping internal storage didn't help too
Boot loops
Rom installed and booted up but after 5 sec it starts restarting ...
Happens everytime it boots up running cm11s 44s stock kernel latest twrp recovery also tried installing it over cm12s but same problem consits i really want a kitkat AOSP rom

[Q&A] [NIGHTLY][ROM][4.1.2] CyanogenMod 10 for Acer A700

Q&A for [NIGHTLY][ROM][4.1.2] CyanogenMod 10 for Acer A700
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NIGHTLY][ROM][4.1.2] CyanogenMod 10 for Acer A700. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A700 Cm 10.0
Hey pawitp,
I'm currently running Pacman 4.4.4 on my A701 and I thought of trying to revert to CM 10.0 to see if the performance is better on the versions before 4.2.
Unfortunately I wasn't able to download this version since CM 10.1 is the earliest possible download on the CM download site and Goo.im is down for some time now, too.
Since you were the maintainer of the device, I have the hope that you might have this version still stored somewhere and that you could upload the latest Cm 10.0 stable release omewhere so that I (and maybe some others) can download it.
Also a big thanks for your courage to keep the device until CM11 updated.
Thanks in advance!
Avendorz said:
Hey pawitp,
I'm currently running Pacman 4.4.4 on my A701 and I thought of trying to revert to CM 10.0 to see if the performance is better on the versions before 4.2.
Unfortunately I wasn't able to download this version since CM 10.1 is the earliest possible download on the CM download site and Goo.im is down for some time now, too.
Since you were the maintainer of the device, I have the hope that you might have this version still stored somewhere and that you could upload the latest Cm 10.0 stable release omewhere so that I (and maybe some others) can download it.
Also a big thanks for your courage to keep the device until CM11 updated.
Thanks in advance!
Click to expand...
Click to collapse
Unfortunately, I don't store any version on my computer. If you really want it, the only way would be to download the source and build it yourself. (Or search for the file elsewhere on the Internet in case someone else has mirrored it.)
Okay, thanks anyways.
Since I never built a ROM by myself that would probably end pretty bad.
Maybe I'll go back to stock or stick with KK. But I already have seen an unofficial CM12.1 build. Maybe this will get a bigger project.

Categories

Resources