I bought my phone outright not on contract so i figure it should be unlocked but seems it isn't.. If i was to call Telus in Canada here would they give me the unlock code for free or would they charge me???
Edit: Well it actually worked and i just used "This Video" on instructions to do it.. It just left a few things out or at least made it harder to see on the video
1. In order to edit the Credits from 1 to 11, you need to enable a setting. Hit F11 in fiddler or click on "Rules" then "Automatic Breakpoints" and enable "Before Requests" otherwise when you run the samsung app it'll just tell you it doesn't have enough credits.
2. Another thing to remember when doing this is now whenever the "Client" Line pops up in Fiddler your going to need to manually tell the program to progress using these little Yellow and Green buttons.. if you don't the Samsung Unlock app won't do anything and it will seem like it froze.. It hasn't its just waiting for you to tell Fiddler to move to the next step..
3. And one more is to make sure before bothering to unlock to make sure your SIM doesn't have a password on it.. I noticed it causing the network unlock to reset whenever i rebooted.
ffcloud2000 i suggest to remove [Q] and question marks from title cos this works.
i did it today on my SG3 i5800 and i can confirm.
it took a while till i got it right and then i saw some instructions below video posted by some guy:
FIGURED IT OUT!!!!!
The only problem I had is with changing credits from 1 to 11.
This is done as follows:
1. enter user name and password and click [Connect]
2. Switch to Fiddler and select the line having word "client" at the end
3. Click Yellow button to see the text
(NOTE: most people miss clicking the yellow button first, which will open the text for editing)
4. Go to credits and type "11"
5. Click the Green button
6. repeat the steps whenever having line "client"
to clarify:
after you hit [connect] you go to fiddler and find line that has word "client" in it. mark that line and hit YELLOW button on the right side. then you change that credit to 11 and then you hit GREEN button. you ll notice that SRS holds when you hit yellow button and continues after green. also when you change those credits from 1 to 11 you ll notice that on SRS it is also changed to 11. wait a bit and you ll get codes.
i tried those 2 links above and those methods didn't work for me. couldn't find code.
I unlock today two Galaxy i5800, mine and my girlfriend's phone.
The first I take about 1,5h or 2h to understand what I have to do, the second phone take about only 2 minutes
It is really easy, but you need to know what have to do before.
PD: So to unlock insert another SIM with a different company (SIM without PIN code!), when ask for a code insert de NCK code that you read with the software.
I need help with this. Can't go through with it.
Memnarch said:
I need help with this. Can't go through with it.
Click to expand...
Click to collapse
What are you having a problem with?
I have Galaxy 3 i5800. Tried following steps in the video from the first post. I get "Invalid procedure call or argument" error in the end, in the SRS program.
I even cannot get enough times(as shown in the video) of that Client2010 line in Fiddler. That guy in video gets that line like 2 times more than me, but in my case it just stops showing, after I've clicked "Run to Completion" on the last client2010 line.
Edit: I will write down here the steps I take and what happens.
---------- Post added at 05:29 AM ---------- Previous post was at 05:02 AM ----------
I am not able to post links yet but here is a screenshot of my steps:
i.imgur.com/VVwUG.png
And then I get that "Invalid procedure call or argument" error in SRS.
Try running the Programs with Administrator.. I ran into errors also but i'm on Windows 8 so it might have been my issue
I did run everything as administrator.
I have read on SRS website that for SRS to work you have to run it on 32 bit computer. I just installed 32 bit windows and didn't work, everything is the same.
Memnarch said:
I did run everything as administrator.
I have read on SRS website that for SRS to work you have to run it on 32 bit computer. I just installed 32 bit windows and didn't work, everything is the same.
Click to expand...
Click to collapse
Try using Compatibility mode.. change it to a different version of windows and retest
Just tried. Didn't work.
Tell me, in which state exactly the phone must be when doing this. And which exactly sim card has to be inside? I didn't yet try without a sim card.
I just had mine plugged into my computer like normal like i do to charge it.. You have to remember to change some settings on your phone though and change them back after you finish
Code:
1. Go to Menu - Settings - Applications - Development -> USB Debugging
2. Type *#7284#, select USB > Modem
3. Type *#9090# and click on usb_diag
Did that. Except for *#9090# part because my phone doesn't show usb_diag but I read somewhere that if it doesn't, it doesn't matter
Damn... I'll just buy the code for unlocking xD.. I'll wait few more days, see if it works out somehow
Memnarch said:
Did that. Except for *#9090# part because my phone doesn't show usb_diag but I read somewhere that if it doesn't, it doesn't matter
Damn... I'll just buy the code for unlocking xD.. I'll wait few more days, see if it works out somehow
Click to expand...
Click to collapse
Yea i just set mine on USB.. can't remember if it was set something else or not
It should work i've done it on two phones now so far..
but today, with SRS new version this doesn't work, does it ?
Does anybody check it today or yesterday ?
I have no idea I just used the version from the video.. could try it though
Sent from my GT-I5800
Where is the client line ?
Where is the client line ??
Can you send me a screencapture plzzz !!
thank you
HI guys, I'm hoping you can help me with a problem that's led me to start threatening my galaxy ace (S5830i) with a hammer.
Actually it's not the phone's fault it's purely my own stupidity, but none-the-less I'm here for help because I've spent all day and night trawling the net, trying to figure out how to proceed to resolve my issue on my own but I simply cannot make sense of the conflicting information I'm finding.
I promise you thing thing if nothing else, I have tried my very best to read around a hundred other forums, pages, and how 'to's but I'm finding that I have no resolution that I can work with because either:
- The tutorials turned out to be for the S5830 - not the i model - when I got to the forum
- The youtube videos all seem to be spoken in accents I cannot understand or not explained clearly, or are too technical
- Links I go to to get apk files etc are broken, wrong or leading me up another path I cannot follow
- Software does NOT look on my screen as it does on tutorials or websites (SDK for example)
- The people explaining the resolution type with such poor English I cannot understand what they're actually saying
- The solutions that work for others are too technical or advanced for me to understand and I'm finding it difficult to learn as I go (apart frm the root instructions which I found quite easy)
Anyway, I'll start at the beginning:
I have a samsung galaxy ace (S5830i) running:
- Gingerbread 2.3.6
- Baseband version S5830iXXLK1
- Kernel version 2.6.35.7
- Build number GINGERBREAD.XXLK3
I've already rooted it so I have superuser access, and I managed that perfectly well on my own
I installed titanium backup and somehow I managed to uninstall the stock email that comes with the phone. I think this is my problem because I now cannot download anything from google play, nor can I add a new gmail account to do so, so I'm stuck in no mans land not able to use googleplay (because my gmail account is now missing from my phone) nor can I seem to figure out how to get th apk file directly into the phone so that I can start fresh.
I'm also absolutely stuck on how to flash the phone and start again because nothing I seem to read is explaining it in simple clear terms that a layman can understand. When I do find a simple explanation, I find it's only for the non 'i' version of the phone, or if I find a simple instruction it's zip files for the rom do not contain all the files I need to use with odin v1.5
Also, there are conflicting explanations on flashing the rom on different forums/sites so I dare not use one over the other because another one contradicts it. I do not want to ruin my phone as right now it still basically works for now as a phone.
In my phone menu, the gmail icon is still there, just not the icon/app that said "email". The icon is now missing from my menus and with it there is now no way to use the play services without a gmail account on the phone.
When I click the gmail icon, it stats to open and then just shuts off quickly, not opening gmail, so I'm pretty sure all this is due to me deleting the email app using titanium backup.
Make sense?
What I'd really be grateful for is if on of you guys could help me out and explain in very simple terms what I need to do to either install the apk directly (preferred) so that I can add a gmail account to the phone and get access to google play again, or failing that a simple how to flash the rom with stock gingerbread, together with links to software that's known to be bonafide.
I am literally being driven mad going around in circles on forums and sites to keep going back to square one.
Any help will be very gratefully received. Or I'm afraid this may mean I'm going to smash my new phone int a wall and never use a smartphone again, because obviously I'm too stupid to play around with them on my own.
I really appreciate your help if someone would be able to invest a little time here.
Thanks very much for your time, guys
Jobeeey
additional info
Right, these are the instructions I found on this forum, but I'm unclear if I'm approaching this right..
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.85.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
Click to expand...
Click to collapse
I've found a rom (which is a single file) and if I'm reading this right I place that in the PDA section of Odin after installing the usb drivers onto my pc (done that and windows recognizes my phone in the sense that it isn't now hassling me for drivers every two seconds).
Ok.. so I seem to have got the correct rom for my specific ace model.. and the instructions seem to be that I now:
1) Connect usb cable
2) Boot my phone into download mode (I can do that I think).. but at what point do I press vol down to download a new os.. before or after pressing start in Odin?
3) Open Odin and add file as in my attached screenshot (I can do that)
4) Click 'start' in Odin
5) Wait for my phone to reboot
And that should be job done, the phone should be flashed with the stock rom again and that should get me back on track, right? Or am I about to screw up my phone and ruin it even further?
Thanks for reading. I hope someone can advise if I'm doing this right as I've seen other forums say that I should tick the 'Re-partition' box, and other that say I shouldn't, and this one says nothing about it at all.
This is one of the tings that's confusing me, and once I'm now flashing a phone for the first time it's flippin scary to do it on my lonesome!
This is what I mean..
I've just tested going into download mode with odin ready, and the phone gets there (vol up+down + power on).. but each time it gets into download mode it seems to disconnect from odin and no com port is open. I get the windows device disconnected/connected beeping and the connection seems to sever.
What the Fffff...
This is exactly what I'm talking about.. nothing seems to be working like it's meant to be and I'm getting nowhere with any instructions I can find after god knows how many hours researching this.
:crying:
update (lol)
Mornin all,
So, just in case anyone finds this useful..
The flashing problem is kind of irrelevant now because:
A) Odin (tried several versions) simply will not stay connected to my phone when it boots into download mode, and having checked many tutorials for this it sees that this is a problem some of us cannot get past.
Anyway, one of the methods to resolve this was to wipe the cache and clear all data etc, which I did, and now my phone is stuck on the "pres the android" screen, and my phone will no longer get past that. Tried pressing clockwise in all four corners but still nothing.
No probs.. so we move on to a new step of trying to split the roms via cygwin, but guess what? Every single time I try to download the cygwin files, that freezes at about 98% and will not download, no matter which mirror I select.
So, this is what I call a curse that isn't going to be lifted by me no matter hat. It's not not meant to be.
Therefore, what I'm going to do is take it to a local shop that unlocks mobiles and give it to them to flash back to stock rom for me.
If that doesn't work, do you know what I'm gonna do?
Nothing. Because there's nothing you can do when the processes do not follow the same progress as they do in the tutorials.
I hope other novice S5830i users save themselves all his time and trouble and don't bother following the same process and become locked out of their phone at the touch android screen.
Update
Yipee,
Right, I stumbled across a solution that worked for me.
What I did was get my 2gb msd card that came with the phone and slapped MindCR v1.0.12 on the card and whacked that in my phone (this bypassed not being able to get a new rom on the sd card as it wasn't unmounted before the crash, so my pc wouldn't recognise the date to put it on via the pc).
Then I updated the rom from that 2gb card (vol up + menu + power to get into recovery mode) and it took it a few minutes to update the firmware and give me back the full use of my phone, and with a shiny new os on it. Whoop!
I didn't bother with CWM as I'd forgotten to add it before flashing, but it worked none-the-less and I'm now back in business (wiped it manually).
As it turned out this version of MindCR works really well so far as I can tell. I realise there are updated roms now but I've come to the conclusion after the scare I had that if you're not entirely sure what you're doing, it's best to leave it alone if it ain't broke.
SO.. now I have a phone with what seems to be a better os than the stock and less bloatware on it, no phone problems I can see after thorough testing... and from what I can tell it turned out to be better than it was before the disaster.
And I learned a bit in the process. Like for example, don't feck around removing apps from smartphones with titanium unless you've backed them up and you're prepared to stress out for over 20hrs wondering what to do about it.
And, also, don't expect much help from a forum because you may not always get it. << That' not a dig at xda by the way. It's just a BIG forum so your threads may not be seen by the right person before they get buried in past pages.
Hope my little journey helps another unsuspecting S5830i user who comes across the thread.
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Well done!
It worked well for me! Thank you!
I had such high hopes for this to work on my Samsung S4, but it doesn't I've got to step 7, did everything as you noted, and when i'm copying text and pressing "Send ASCII" button, it appears in the black field above, but isn't followed by "ok". I put in the second part of the text, still no "ok" and there is no call going through the phone.... I'm not able to proceed any further than this step. Why could that happen? Please help!
Linking to here would be better than writing a long wall of text, just saying. Also for S6 to S7 edge you can downgrade from nougat back to marshmallow 7.0 to 6.0 if needed for FRP bypass / Google Account lock.
http://forum.gsmhosting.com/vbb/f77...ote-7-frp-bypass-all-samsung-devices-2124806/
I'm stucked to the connection of my S6. I have an S6 Edge and it connect normally, but when I try the S6 that has a samsuns block, it says some problem with the driver even if I have installed the Samsung Driver Pack... Am I doing something wrong? Can someone help me please
i can get to the browser part, i downloaded all the apps i needed for this task, but when i try to install them it wont run the install and nothing happens so now i have a phone i cant get in to and apps sitting in the download folder in the phone and cant do anything with any of it....... looks like its just time to take a hammer to it and say hell with it
I Know the Thread is old
I can't reanable Samsung account, i enable it with package disabler, clear cache and nothing happens after hit add account und find my phone
warpilein said:
I Know the Thread is old
I can't reanable Samsung account, i enable it with package disabler, clear cache and nothing happens after hit add account und find my phone
Click to expand...
Click to collapse
Same here.
I can click on Samsung account +, but nothing happens.
If I try to make a samsung account over the option accounts....nothing happens....
swordomega said:
Same here.
I can click on Samsung account +, but nothing happens.
If I try to make a samsung account over the option accounts....nothing happens....
Click to expand...
Click to collapse
Now I made somehow another samsung accaunt over other means. made reset over this other samsung account.
After reboot/factory reset still stuck at samsung. WTF. Did samsung made it bulletproof in their updates?
thanks bro I followed all steps one by one and it worked like a charm thanks alot bro
thanks Big boss, I followed all steps one by one and it worked like a charm without any obstacle for my S5 device now i can use it like before many thanks bro for your valuable assistance and I really appreciate for it, there is no way I can pay you back but my plan is to appreciate ... keyse mire in mogadishu- Somalia via phone number 0615276667
i've got error at this stage...
at+creg?
+CREG: 0,3
OK
atd900;
CLIR:255
OK
ERROR
not call from 900 (
added steps and much headache
Decided I should add to the thread after break activation lock on my G900A (S5 AT&T) that had Android 6.0.1. Around Step 8 is where I got stock and used another thread to get the rest of the way in the phone...albeit a VERY long way around.
Instead of sending a text in Step 8, you can click the paperclip and long press google maps. There's some steps to get to the privacy policy / terms of use (I don't have all the things you had to click). From here, most people long press a word or phrase and use web search or assistant. I got stuck again with some security error.
However, the GOOGLE logo at the top of the page is clickable into Google app and voila I can search for Package Disabler. There is a waffle (3x3 dots) at the top and you can click PLAY STORE but it's the desktop version...dam! However, and it gets worse, you can download but not install any packages from app browser b/c it needs permission for storage. This is where it got hilarious. I found a package disabler download page that advertised to install their proprietary app....clicking that advertisement popped me into Play Store app....hurray!
I was able to search for chrome and open it (you can't download or install any apps from Play store)...then continue on with the with steps. I had difficulty getting package disabler installed with PDP but just kept retrying and it eventually worked. BAM....I'm past the setup login and on the home screen. However, still unable to get reactivation lock turned off nor able to factory reset. The option was not greyed out but putting in my samsung credentials was successful (I could even see my phone in Samsung Find my Phone) but reactivation lock still turned on. dam again! At this point i'm thinking to sell the phone with reactivation lock and try to make $20 on it.
After some interesting research, it appeared that Lollipop and Kitkat were not so secure when it came to Reactivation Lock. One thread suggested to delete your samsung account, downgrade to Lollipop first (then KitKat if unsuccessful), then re-create your samsung account with exact email and password, then boot the phone. This is what ultimately did the trick! I used ODIN and backed down to Android 5.1.1. I signed in and the first setup screen after signin asked to turn on reactivation lock. Unchecked and it's gone! I verified in the bootloader that indeed the lock is gone! HALLELUJAH!!!!!!!
It works on other samsung phones as well. I fixed a mega 2 using this method. Thanks a bunch
I can't see any texting option after cancelling 900 dead dial on Samsung S6
Please help me anyone
sc0rch3d said:
Decided I should add to the thread after break activation lock on my G900A (S5 AT&T) that had Android 6.0.1. Around Step 8 is where I got stock and used another thread to get the rest of the way in the phone...albeit a VERY long way around.
Instead of sending a text in Step 8, you can click the paperclip and long press google maps. There's some steps to get to the privacy policy / terms of use (I don't have all the things you had to click). From here, most people long press a word or phrase and use web search or assistant. I got stuck again with some security error.
However, the GOOGLE logo at the top of the page is clickable into Google app and voila I can search for Package Disabler. There is a waffle (3x3 dots) at the top and you can click PLAY STORE but it's the desktop version...dam! However, and it gets worse, you can download but not install any packages from app browser b/c it needs permission for storage. This is where it got hilarious. I found a package disabler download page that advertised to install their proprietary app....clicking that advertisement popped me into Play Store app....hurray!
I was able to search for chrome and open it (you can't download or install any apps from Play store)...then continue on with the with steps. I had difficulty getting package disabler installed with PDP but just kept retrying and it eventually worked. BAM....I'm past the setup login and on the home screen. However, still unable to get reactivation lock turned off nor able to factory reset. The option was not greyed out but putting in my samsung credentials was successful (I could even see my phone in Samsung Find my Phone) but reactivation lock still turned on. dam again! At this point i'm thinking to sell the phone with reactivation lock and try to make $20 on it.
After some interesting research, it appeared that Lollipop and Kitkat were not so secure when it came to Reactivation Lock. One thread suggested to delete your samsung account, downgrade to Lollipop first (then KitKat if unsuccessful), then re-create your samsung account with exact email and password, then boot the phone. This is what ultimately did the trick! I used ODIN and backed down to Android 5.1.1. I signed in and the first setup screen after signin asked to turn on reactivation lock. Unchecked and it's gone! I verified in the bootloader that indeed the lock is gone! HALLELUJAH!!!!!!!
Click to expand...
Click to collapse
I found a much simpler work around. After you long press google maps, simply open the sidebar menu and press Google earth. It will pop you into the play store app on the Google earth app page. Just search for package disable pro and pdp engine and voila! The only catch is the app itself is $3.45 and I don't think the free version is available anymore. I bought it just to use for this and was going to get it refunded once I'm done. But that avoids the hassle of finding the link that will take you to the store app since I searched endlessly for that promised link to no avail, lol
Sent from my perry using XDA Labs
Also, I ended up having to download an app named blackmart in order to get the PDP app. Even after purchasing through play store. So if anyone needs the apks I can try uploading to a hosting site to save the hassle
what do you mean exactly when you say "android drivers" on your pc?
An opportunity to access phone settings and home screen
The..King said:
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Click to expand...
Click to collapse
Hello. I know the thread is old but this may help. None of the Samsungs I've used did happen to work with Realterm yet (not saying it does not work). So here is an alternative that can drive you straight into the device setting. There choose "Easy Mode" an boom on the home screen. From home screen tap "easy settings/easy mode an activate normal mode. I tried this method on my Note 4 (SM-N910T) and It worked.
Steps :
1- Download and flash the firmware with Odin or whatever capable box/tool (but ou may skip this step if "lock screen like slide to unlock" is activated in the locked phone). To know this option is on just press power to turn off/on the screen. If you see a lock screen instead of the "choose language" screen go to step 2. If not "DON'T FACCTORY RESET". It won't help. Flash as many times as required until you get to a lock screen. Just off/on the sreen to see.
2- From the lock screen swipe on the "Phone" icon and choose the contact app.
3- On the new call window, tap "contacts" on the upper right then open options (the 3 vertical dots) and choose settings/contacts/accounts an add a google account. This account should have a contact with email in it. For example I added my google account which had many contacts with emailss, I then ranomly chose a name with email and tried to send an email.
4- From email editing screen select the 3 dots of options and go to accounts.
5- A seurity mini window will pop up. Accept it.
6- Boom you are in the settings.
7- Search for "easy mode" and apply it. You'll land on the home screen.
8- You can have access to normal screen by going to easy setting/easy mode/normal mode .and apply.
9- Direct install package disabler and other needed apps from pc or send them to your phone memory an manual install them.
10- Follow the instructions from The..King to bypass now that you can do it.
NB: BE CAREFUL NOT TO USE HOME BUTTON TO GO BACK TO HOME SCREEN OR YOU WILL BE WELCOME BY A BLANK BLACK SCREEN. USE BACK BUTTON INSTEAD. OR USE RECENT WINDOWS BUTTON TO ACCESS BEFORE USED APPS. IF YOU WANT TO CLEAR RECENT APPS KEEP "SETTINGS" WINDOWS AS YOU CAN HAVE THE CONTROL BACK THE EASY MODE/NORMAL MODE.
SHALOM
The..King said:
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Click to expand...
Click to collapse
Works like balerina. I read this post many times. I have no Windows Machine thus I can not use amazing Real Term.
I found bloated 6.0.1 ROM for SM-G925F From Globe Philipines G925FXXS5DRB1_G925FOLB4DQJ1_G925FXXS5DRA2 . I understand the most important is How to open Browser . This ROM give a Golden Chance to access browser. I used other android phone to set up google account via NFC. After completing setting up google account ROM asking to add another email account. So I choose Yahoo > tap sign up > privacy policy it will pop up two option > open using Chrome or Samsung Browser. Choose Chrome.
A. Turn S6E to download mode.
B. Flash the bootloader (sboot.bin), hidden.img, system.img (i used heimdall on gentoo linux)
- heimdall flash --BOOTLOADER sboot.bin --HIDDEN hidden.img --SYSTEM system.img
- Nougat boot will booting 6.0 properly.
C. Booting up
D. Setup google account.
E. On the page to set another email. choose Yahoo > tap Sign Up > tap Privacy Policy > this will pop up the browser > choose chrome
From here you just follow above #9 to Finish.
x1123 said:
Works like balerina. I read this post many times. I have no Windows Machine thus I can not use amazing Real Term.
I found bloated 6.0.1 ROM for SM-G925F From Globe Philipines G925FXXS5DRB1_G925FOLB4DQJ1_G925FXXS5DRA2 . I understand the most important is How to open Browser . This ROM give a Golden Chance to access browser. I used other android phone to set up google account via NFC. After completing setting up google account ROM asking to add another email account. So I choose Yahoo > tap sign up > privacy policy it will pop up two option > open using Chrome or Samsung Browser. Choose Chrome.
A. Turn S6E to download mode.
B. Flash the bootloader (sboot.bin), hidden.img, system.img (i used heimdall on gentoo linux)
- heimdall flash --BOOTLOADER sboot.bin --HIDDEN hidden.img --SYSTEM system.img
- Nougat boot will booting 6.0 properly.
C. Booting up
D. Setup google account.
E. On the page to set another email. choose Yahoo > tap Sign Up > tap Privacy Policy > this will pop up the browser > choose chrome
From here you just follow above #9 to Finish.
Click to expand...
Click to collapse
Is there some way to use heimdall in a Windows Machine?
Hello to all my fellow XDA members! I have literally spent the last eight days attempting to get past the FRP (Factory Reset Protection) lock on my Verizon Samsung Galaxy Note 5 (SM-N920V). As many of you may know, it is nearly impossible, as the Verizon phones have a locked bootloader and thus we cannot install TWRP. Using Odin to reflash OEM firmware does not do the trick either, as FRP persists past all of this.
Well, I have finally come across a solution. The first problem I encountered was that I was on Nougat 7.0 firmware. You want to downgrade to Marshmallow 6.0.1 firmware, which can be found by googling "N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.zip". That is a ROM specific to the SM-N920V. If you are on any other carrier, this will NOT work for you, so you will need to find the Marshmallow ROM for your respective device.
***Please Note: This should work on any device that can be downgraded to Marshmallow 6.0.1 or earlier, but it is NOT guaranteed. I have NOT tested it on any other devices than my Note 5. Please do feel free to try and report back.
Using Marshmallow allows us to take advantage of a bluetooth bypass where we can access apps, namely Chrome and Settings. An important note about the bluetooth headset is that it can be any headset but it must have a button that invokes voice command, i.e Siri or Google Assistant. This will not work otherwise!
Firstly, I must give credit where credit is due, so credit to @MrMike2182 with his "How to downgrade from Nougat 7 to Marshmellow 6.0.1" post, which is how I got the idea in the first place. In his post, you can find a link to download the ROM. Other credit goes to GLOBAL Skills on YouTube with their "Samsung note 5 frp Google bypass as always %100 works" video. I hate the way they worded their title and it seems like one of those fake videos but trust me, it works.
What you need: (I would suggest downloading these from APKMirror for no frills or troubles. Don't download them now, wait until you get to Chrome on the device.)
Odin3 v3.12.3
Marshmallow ROM for your device
USB Cable
Bluetooth Headset
Google Account Manager 6.0.1 APK
Quick Shortcut Manager 2.4.0 APK
Steps:
Reboot into Download Mode. For the Note 5, this is acheived by pressing and holding the power button, volume down button, and home button. A screen will pop up asking if you want to continue. Press the volume up key.
Connect your device to the computer through the USB cable
In Odin, click AP and choose your Marshmallow ROM. Flash the ROM and let the phone reboot
Put your bluetooth headset in pairing mode
Tap "Emergency Call" and type 112
Once the call screen pops up, tap bluetooth, wait for the device to appear and when done pairing, end the call
Setup a wifi connection
Press the voice command key on your bluetooth headset and choose Google
Say anything, it doesn't matter, we just need to get to the search screen
Once at the search screen, type in Chrome, then choose the Chrome app
Using Chrome, download the Google Account Manager apk (wait until it finishes downloading to tap open and install it right away)
The system is going to tell you that the install is blocked as we need to enable the installation of apps from unknown sources. Tap on settings and tap the slider next to "Unknown sources". Make sure you uncheck the "Allow this installation only" box so we don't have to repeat the process.
Once the install is finished, click done. Now download the Quick Shortcut Manager and install that. When that install is done, open the app.
In the "Input keyword to filter" field, type in Google Account Manager. Tap on it to expand the tasks. Tap on the first one that says "Type Email and Password" (NOT the .EduLoginActivity one).
Tap Try, which will take you to a screen prompting you for your password. In the upper right hand corner, tap the three dots for the "Browser Sign-In" option, and acknowledge the terms.
Now login using whatever Google account you want associated with the phone. It might take a while, don't worry.
Restart the phone. When it restarts, keep tapping next to get through the setup process. When you reach "Just a sec...", this might also take a while. Do not worry :silly:
Done! You can finish out the setup process however you like. Enjoy your phone!
wow, awesome, thanks!!! worked like a charm on my sm-n920v
Skimmed this over and seen the "dial 112" part in step 5.
This will indeed phone the police.
nadcicle said:
Skimmed this over and seen the "dial 112" part in step 5.
This will indeed phone the police.
Click to expand...
Click to collapse
What Country are you in? In the US & Canada, police emergency dial is 911
Sent from my SM-N920V using Tapatalk
donc113 said:
What Country are you in? In the US & Canada, police emergency dial is 911
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
I am in the US. Tennessee to be exact.
On N920V Nougat 7.0 Download Mode blocked by FRP . And impossible to flash nothing for downgrade
I was able to flash to image
and now I can join a bluetooth headset to the device, but the voice key thing is not working for me.
nadcicle said:
I am in the US. Tennessee to be exact.
Click to expand...
Click to collapse
yep... I'm in Tn too.. it called the piggies. smh
Yeah, 112 dials the local emergency for me too, in FL.
For anyone else who's trying to do this and can't get it to work, these instructions worked for me!
https://addrom.com/how-to-bypass-frp-samsung-note-5-android-7-security-2018/
---------- Post added at 08:30 PM ---------- Previous post was at 08:30 PM ----------
Yeah, 112 dials the local emergency for me too, in FL.
For anyone else who's trying to do this and can't get it to work, these instructions worked for me!
https://addrom.com/how-to-bypass-frp-samsung-note-5-android-7-security-2018/
Quick shortcut manager??
Cannot find Quick shortcut manager, only Quick shortcut Maker. Is this the same?
ivtechboyinpa said:
Hello to all my fellow XDA members! I have literally spent the last eight days attempting to get past the FRP (Factory Reset Protection) lock on my Verizon Samsung Galaxy Note 5 (SM-N920V). As many of you may know, it is nearly impossible, as the Verizon phones have a locked bootloader and thus we cannot install TWRP. Using Odin to reflash OEM firmware does not do the trick either, as FRP persists past all of this.
Well, I have finally come across a solution. The first problem I encountered was that I was on Nougat 7.0 firmware. You want to downgrade to Marshmallow 6.0.1 firmware, which can be found by googling "N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.zip". That is a ROM specific to the SM-N920V. If you are on any other carrier, this will NOT work for you, so you will need to find the Marshmallow ROM for your respective device.
***Please Note: This should work on any device that can be downgraded to Marshmallow 6.0.1 or earlier, but it is NOT guaranteed. I have NOT tested it on any other devices than my Note 5. Please do feel free to try and report back.
Using Marshmallow allows us to take advantage of a bluetooth bypass where we can access apps, namely Chrome and Settings. An important note about the bluetooth headset is that it can be any headset but it must have a button that invokes voice command, i.e Siri or Google Assistant. This will not work otherwise!
Firstly, I must give credit where credit is due, so credit to @MrMike2182 with his "How to downgrade from Nougat 7 to Marshmellow 6.0.1" post, which is how I got the idea in the first place. In his post, you can find a link to download the ROM. Other credit goes to GLOBAL Skills on YouTube with their "Samsung note 5 frp Google bypass as always %100 works" video. I hate the way they worded their title and it seems like one of those fake videos but trust me, it works.
What you need: (I would suggest downloading these from APKMirror for no frills or troubles. Don't download them now, wait until you get to Chrome on the device.)
Odin3 v3.12.3
Marshmallow ROM for your device
USB Cable
Bluetooth Headset
Google Account Manager 6.0.1 APK
Quick Shortcut Manager 2.4.0 APK
Steps:
Reboot into Download Mode. For the Note 5, this is acheived by pressing and holding the power button, volume down button, and home button. A screen will pop up asking if you want to continue. Press the volume up key.
Connect your device to the computer through the USB cable
In Odin, click AP and choose your Marshmallow ROM. Flash the ROM and let the phone reboot
Put your bluetooth headset in pairing mode
Tap "Emergency Call" and type 112
Once the call screen pops up, tap bluetooth, wait for the device to appear and when done pairing, end the call
Setup a wifi connection
Press the voice command key on your bluetooth headset and choose Google
Say anything, it doesn't matter, we just need to get to the search screen
Once at the search screen, type in Chrome, then choose the Chrome app
Using Chrome, download the Google Account Manager apk (wait until it finishes downloading to tap open and install it right away)
The system is going to tell you that the install is blocked as we need to enable the installation of apps from unknown sources. Tap on settings and tap the slider next to "Unknown sources". Make sure you uncheck the "Allow this installation only" box so we don't have to repeat the process.
Once the install is finished, click done. Now download the Quick Shortcut Manager and install that. When that install is done, open the app.
In the "Input keyword to filter" field, type in Google Account Manager. Tap on it to expand the tasks. Tap on the first one that says "Type Email and Password" (NOT the .EduLoginActivity one).
Tap Try, which will take you to a screen prompting you for your password. In the upper right hand corner, tap the three dots for the "Browser Sign-In" option, and acknowledge the terms.
Now login using whatever Google account you want associated with the phone. It might take a while, don't worry.
Restart the phone. When it restarts, keep tapping next to get through the setup process. When you reach "Just a sec...", this might also take a while. Do not worry :silly:
Done! You can finish out the setup process however you like. Enjoy your phone!
Click to expand...
Click to collapse
Homer265 said:
Cannot find Quick shortcut manager, only Quick shortcut Maker. Is this the same?
Click to expand...
Click to collapse
worked for me!
Anybody want to test out my kernel image. https://drive.google.com/open?id=1Hl90m3sKz3rQVv7CCziHkA3hiV2m7qyn I think I found out what is causing no root/ no boot on the verizon note 5. Just download my zip, unpack set aside. Now split your booted boot.img and copy name of zImage in your split image folder. Rename downloaded Image to the name of your zimage and put in your booted split image folder replacing your exisiting zimage. Repack and install into your device. See if it boots and give root privilege.
I cant test because I dont have sm-n920v no more, but applied verizon code to my sm-N920p kernel and I got the no boot, or stuck on galaxy note screen that happens when you try to do with verizon note 5. I removed code and kernel booted.