Database Info

[Solved] motog recovery not working in bootloader

Hi, my 1st post, halloworld
I rooted my xt1032 using Paul O’Brien metod : r1-motog-modifiedrecoveryroot, with a modified recovery.
I'm rooted but when I try to go to recovery from bootloader the phone just normally boots.
So no way to make a nandroid backup, a wipe cache and so on...
I suppose it's becouse I followed a guide for 4.3 while I was already updated to 4.4
My question is, could I have any problem flashing the correct version of cwm for kitkat, after the modified recovery I used for rooting?
welcome suggestiones

When your in boot loader select the recovery option and press the up volume to get to recovery
Sent from my XT1034 using xda app-developers app

That's what I did(100times...), with vol.up yes, not with power button. What I get is a normal reboot. No way to go in recovery, event tried from adb or fastboot in a windows shell.
No one having this problem with recovery?

fatechand said:
That's what I did(100times...), with vol.up yes, not with power button. What I get is a normal reboot. No way to go in recovery, event tried from adb or fastboot in a windows shell.
No one having this problem with recovery?
Click to expand...
Click to collapse
I had this problem with recovery during rooting,
but I was rooted anyway, so now my moto g is running ok

fatechand said:
That's what I did(100times...), with vol.up yes, not with power button. What I get is a normal reboot. No way to go in recovery, event tried from adb or fastboot in a windows shell.
No one having this problem with recovery?
Click to expand...
Click to collapse
It's probably caused by the recovery not being compatible with your bootloader.
What version of the bootloader are you on? That custom recovery might only work with 4.3 only.
You can easily change your bootloader with the mfastboot and extracting the motoboot.img from the (correct) stock rom image.

well, my bootloader should be the one of Kitkat, for I upgraded from 4.3 just before rooting.
I could change bootloader as you told me, but what about compatibility with 4.4 rom?
My idea was just to change the recovery, with cwm 6.0.4.7 that's now compatible with motog 4.4,
but what about my actual root configuration?
I don't actually know what I risk doing this way, or if I need a wipe data.
Which are the right steps?

fatechand said:
well, my bootloader should be the one of Kitkat, for I upgraded from 4.3 just before rooting.
I could change bootloader as you told me, but what about compatibility with 4.4 rom?
My idea was just to change the recovery, with cwm 6.0.4.7 that's now compatible with motog 4.4,
but what about my actual root configuration?
I don't actually know what I risk doing this way, or if I need a wipe data.
Which are the right steps?
Click to expand...
Click to collapse
I think the best way is to flash a compatible recovery via fastboot. No need to wipe anything. Your root won't be broken afaik.

fatechand said:
well, my bootloader should be the one of Kitkat, for I upgraded from 4.3 just before rooting.
I could change bootloader as you told me, but what about compatibility with 4.4 rom?
My idea was just to change the recovery, with cwm 6.0.4.7 that's now compatible with motog 4.4,
but what about my actual root configuration?
I don't actually know what I risk doing this way, or if I need a wipe data.
Which are the right steps?
Click to expand...
Click to collapse
Yes, I would try flashing CWM 6.0.4.7-falcon as well. It works for both 4.3 and 4.4 bootloader (I tried myself.)
If just flashing the bootloader, you don't need to wipe anything ..

Well, I'll do it with cwm, after weekend. Thanks for suggestions

fatechand said:
Well, I'll do it with cwm, after weekend. Thanks for suggestions
Click to expand...
Click to collapse
All so good - very nice
I flashed recovery.img from my stock reatil en-GB xml.zip , now from fastboot i can go to recovery, that actually in kitkat is just the green robot with red warning -> from here pressing VOL UP and Clicking POWER button I can get stock recovery menu.
What's good that I tried and finally could INSTALL last minor 176.44.1 UPDATE !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm now going to flash cwm or Philz touch
Thanks forum

last KitKat compatibile version of CWM installed like a charme, no problems with root so now my moto g is rooted and running last updated stock ROM.
solved post

fatechand said:
last KitKat compatibile version of CWM installed like a charme, no problems with root so now my moto g is rooted and running last updated stock ROM.
solved post
Click to expand...
Click to collapse
:thumbup:

moto g anble to boot up
can u plz help me .... i have a problem with my moto g...
actually i unlock the bootloder..
after that its working with CM11
but now mobile stuck in unlock bootloader screen ..
recovery menu also not working..
when i was trying to instal stock firmware.. everything installing OK... but no results
same thing happen again... stuck in unlock bootloader screen ..
wat is my mobile problem ...
plz suggest me

vardhanram said:
can u plz help me .... i have a problem with my moto g...
actually i unlock the bootloder..
after that its working with CM11
but now mobile stuck in unlock bootloader screen ..
recovery menu also not working..
when i was trying to instal stock firmware.. everything installing OK... but no results
same thing happen again... stuck in unlock bootloader screen ..
wat is my mobile problem ...
plz suggest me
Click to expand...
Click to collapse
Did you found solution?

jayrocky11 said:
Did you found solution?
Click to expand...
Click to collapse
no not yet..................

vardhanram said:
no not yet..................
Click to expand...
Click to collapse
How did you flash? I've flashed GPE, Downgrade to JB and different versions of Ktikat e.g. Retail and O2 Uk and nothing has happened.

[SCRIPT] Moto E XT1023 super easy ROOT, RECOVERY, & RESTORE

This is a little script tool I made up for the Moto E XT1023 The Firmware restore will only work on the XT1023 but all other options should work on all the variants of the Moto E
It is really simple. But requires a unlocked bootloader video HERE If you need help with bootloader unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download the Moto E Super Tool
extract the tool to your desktop
Turn on usb debugging mode on the device
install the Motorola drivers
Run the Moto E 1 Moto-E-Restore-XT1023.bat file
then just select what you want to do
1. Root your Moto E
2. Flash TWRP Recovery
3. Flash Stock Android Recovery
4. Flash CWM recovery
5. Remove the unlocked bootloader warning
6. Fully restore the Moto E to stock
7. Fully restore plus Relock the bootloader
Newest release V2
Change Log
Vision 1 first release
Version 2
updated TWRP
Updated Supersu.zip
DOWNLOAD SUPER TOOL
WIll add more to this if i have time
Hope this will help out some noobs

Is it for all the models like xt1021 nd xt1022??

zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
the first line of thread answers your question. variants=models

zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
I have tested it on the xt1023 but from what i am told it should work on all models because supersu.zip is universal and same with TWRP if i am not mistaken.

doesn't reboot into recovery
Everything seems ok during the process but when the phone reboots it stays in the Motorola logo/Android screen, never moving on to TWRP. This also happened when I tried the normal Fastboot method. Bootloader is unlocked and usb debugging is checked, of course.
Any ideas?
edit:
More info-
1. The only command that seems to work on my phone is when I install stock recovery.
2. When I go into bootloader and try to restart in any mode but normal restart I get a blank screen
3. I previously bricked my phone by doing something stupid so I reflashed one of the factory firmwares-
RETUAWS_XT1023_4.4.2_KXC20.82-15_cid9_CFC.xml
Could this be the source of my problem?
Thanks in advance!

Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz

satanas17 said:
Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz
Click to expand...
Click to collapse
updated tool with newest twrp and supersu

Cannot upgrade to 4.4.4
Thanks for the nice video; however I just have a problem when trying to go back to stock recovery to install the 4.4.4 update that is recently pushed to Moto E devices; I want to go back to stock recovery as it does not gets installed with any custom recovery.
I tried the said method 4-5 times but it gives me with a dead android icon when trying to get to stock recovery..
Please help me to get 4.4.4 on my device.

Yeah that is normal you have to press volume up and power on that screen to get to options

Tomsgt said:
Yeah that is normal you have to press volume up and power on that screen to get to options
Click to expand...
Click to collapse
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4

_SGY said:
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4
Click to expand...
Click to collapse
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean

Deadly said:
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean
Click to expand...
Click to collapse
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here

No more wallpaper crashes after wipe data and cache

_SGY said:
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here
Click to expand...
Click to collapse
Updated Yippeeeeee...
The issue was my rooted device, I had to unroot, install stock ROM as I had removed plenty of bloatware..update success, re-root and enjoy!!!!
Posting steps to benefit someone who may be facing the same issue as I was..

Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.

Did you extract the zip to your desktop? And are the right drivers installed also try using a different USB cable or port.

Demonseye said:
Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.
Click to expand...
Click to collapse
Did u connected mobile in bootloader ? Try t

sham4u2sam said:
Did u connected mobile in bootloader ? Try t
Click to expand...
Click to collapse
Yeah, I tried it. Weird thing is that we reconnected it to his computer, and the script recognized his phone, while my PC did not. Everything went smooth. Thanks.

Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update

hard91 said:
Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update
Click to expand...
Click to collapse
challenge excepted LOL Moto E Super Tool
Your Option 4 isnt going to happen

How to root 11.0-XNPH30O?

Problem: I cannot root on 30O.
I have revived my OnePlus One from a soft-brick because I was trying to update from 25R to 30O from the rooted phone. Please refer to forum.xda-developers.com/oneplus-one/help/how-to-update-to-11-0-xnph30o-t2847037for more info. I have learned so much from it.
So after the soft brick, I restored it to 22R. Then an update came in for 25R, I followed the instructions to root the phone, root checker confirmed that I was indeed rooted. (I thought I still had TWRP) so I updated to 30O. I read that the 30O has another update after it, but I still have not received that update yet. When updated to 30O, I realized I can't use titanium back up anymore, and I no longer have SuperUser.
So I followed this video to do the root once again. https://www.youtube.com/watch?v=5O2e_R_TbVg&list=UUk1SpWNzOs4MYmr0uICEntg. But to no avail it doesn't seem to root. When I reboot into recovery mode, TWRP is also gone instead it shows the stock CM11S recovery.
The main reason, I wanted to upgrade to 30O was to be up-to-date, I got my wish! It's kind of ironic. But I still want to be rooted once more. If anyone can help, thank you in advance.
I will check this thread again tomorrow, I thank you for all that XDA members especially vamshi88 has been so persistent in helping me. These have been stepping stones for me as an Android user.

Is your bootloader unlocked? It should if you had twrp installed. Why don't you install twrp with fastboot and then simply flash supersu zip?
Sent from my A0001 using Tapatalk

boober78 said:
Is your bootloader unlocked? It should if you had twrp installed. Why don't you install twrp with fastboot and then simply flash supersu zip?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I tried to unlock the bootloader in Fastboot Mode, but it doesn't wipe my entire device instead it just brings it to the lockscreen.. As if nothing happened. I followed the youtube video too.

can you put your phone in fastboot and try this command. It will tell you your fastboot status
fastboot oem device-info
Click to expand...
Click to collapse

playya said:
can you put your phone in fastboot and try this command. It will tell you your fastboot status
Click to expand...
Click to collapse
Okay, thank you. I will try this at home.

Do I have to press Shift+Right click and open command prompt in the OPO Toolbox folder? Or can I just do it in the cmd? I want to learn as much as possible from these instructions. Thank you for your patience.

skyhonor said:
Do I have to press Shift+Right click and open command prompt in the OPO Toolbox folder? Or can I just do it in the cmd? I want to learn as much as possible from these instructions. Thank you for your patience.
Click to expand...
Click to collapse
hey make life easy for you simply download a tool called minimal adb. Its great but just open up a cmd window in where your fastboot exe is located. Also you can simply click on thanks if anyone has helped you...

playya said:
hey make life easy for you simply download a tool called minimal adb. Its great but just open up a cmd window in where your fastboot exe is located. Also you can simply click on thanks if anyone has helped you...
Click to expand...
Click to collapse
I thank you and I will click the thanks button as soon as my 8 thanks limit has been lifted.:good:
I will download the minimal adb as you suggested as soon as I get home.

playya said:
can you put your phone in fastboot and try this command. It will tell you your fastboot status
Click to expand...
Click to collapse
It returned this..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG][/IMG]
The problem is I cannot unlock the bootloader anymore. When I tried other Youtube methods regarding rooting the OnePlus One, I get stuck on the bootloader option and instead of wiping my data. It just reboots my device to the lockscreen. Thank you for understanding.

skyhonor said:
It returned this..
[/URL][/IMG][/IMG]
The problem is I cannot unlock the bootloader anymore. When I tried other Youtube methods regarding rooting the OnePlus One, I get stuck on the bootloader option and instead of wiping my data. It just reboots my device to the lockscreen. Thank you for understanding.
Click to expand...
Click to collapse
Oh nevermind! I'm such a dummy >.<! It says bootloader unlock true.. I missed this little detail, I was never good at logic in math.. I thank you all that has helped me root my device to 30O.

HOW TO INSTALL TWRP AND ROOT ASUS ZENFONE MAX (Z010D) Android 6.0.1 [ww_13.8.26.31 ]

the step by step guideline is like these :
UPDATE
Due to the fact that Asus has finally released the bootloader unlock utility for the device , you can now flash twrp and root without using a beta kernel as described above in this post , what is now needed is just to download the unlock bootloader apk from here http://dlcdnet.asus.com/pub/ASUS/Ze...8.1970894933.1503698507-1463517309.1503322403 ,unlock the device , after that use the same process and commands to flash twrp directly , after that , root using the same files as described below.
INSTALLATION OF TWRP
1. download minimal ADB and fastboot from here https://yadi.sk/d/JuXDyaWLsitGv and install with icon on desktop.
2. dowload the custom recovery image from here https://yadi.sk/d/kT5i3rNksitPD
3. enable usb debugging ,connect to PC and boot into fastboot mode.
4. start minimal ADB and enter the following commands :
Code:
fastboot devices
hit enter button
Code:
fastboot flash recovery
after inputing this command press the space key on the keyboard and drag the recovery .img file to the command prompt window OR enter the directory of the recovery.img file.
5. wait for everything to be done , it might come up with a message saying ""FAILED(remote:cant flash unsigned image)" , don't worry about that .
6. IMPORTANT! POWER OFF THE DEVICE BY LONG PRESSING THE POWER BUTTON AND BOOT STRAIGHT INTO RECOVERY BY PRESSING VOLUME DOWN(-),IF YOU ALLOW THE DEVICE TO BOOT TO NORMAL SCREEN AT FIRST BOOT,THE STOCK RECOVERY WILL BE RESTORED !!
7. after booting into TWRP you can now boot into normal screen and thats it folks , you're done
ROOT
1. download the superSU file from here https://yadi.sk/d/Yhm6fnohsiugr and flash from recovery , done
DISCLAIMER :YOU ARE DOING EVERYTHING AT YOUR OWN RISK ,NO ONE IS RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE !
credits to the 4pda.ru guys in this thread http://4pda.ru/forum/index.php?showtopic=726975,jekpol,knedlyk and others !

Hello:
¿Is this method valid for ww_13.8.26.36_20160624?
Thank you in advance for your help.

cerillo63 said:
Hello:
¿Is this method valid for ww_13.8.26.36_20160624?
Thank you in advance for your help.
Click to expand...
Click to collapse
Yes its valid, just tried it on my device a few hours ago ,everything went through as expected :good:

jide1 said:
Yes its valid, just tried it on my device a few hours ago ,everything went through as expected :good:
Click to expand...
Click to collapse
Ok
I'll try to do it tonight.
Thanks a lot for your help.

Just an important message regarding this thread
Please note that this tutorial only works for the older Asus Zenfone Max not the newer version with the Snapdragon 615. Don't apply this procedure on the new upgraded hardware device or you will face many problems.

sarthakgrover said:
Please note that this tutorial only works for the older Asus Zenfone Max not the newer version with the Snapdragon 615. Don't apply this procedure on the new upgraded hardware device or you will face many problems.
Click to expand...
Click to collapse
Thank you for your advice.
I've got the older Max, with snapdragon s410
---------- Post added at 08:16 PM ---------- Previous post was at 07:38 PM ----------
Hi again, I've followed the instructions, and now my phone is successfully rooted.
Thanks everyone , especially "jide1" for creating this useful post.

Hey mates.
1) Is it necessary to flash the RAW beta file first? I've had no luck flashing the TWRP over the OTA stock update.
2) is it possible to do a FLASHALL from a Linux environment? I noticed that FASTBOOT had a FLASHALL command, but i'm not sure if it requires a ZIPped file or can work with a RAW image.

bryceatjapan said:
Hey mates.
1) Is it necessary to flash the RAW beta file first?
Click to expand...
Click to collapse
yes, you need to flash the beta file first in other to change the kernel version .

Waiting For device!!
I have been trying to flash the Android Raw file,but as soon as i enter the command,cmd says "WAITING FOR DEVICE".I have been trying it for hours and still no clue

uchiha07 said:
I have been trying to flash the Android Raw file,but as soon as i enter the command,cmd says "WAITING FOR DEVICE".I have been trying it for hours and still no clue
Click to expand...
Click to collapse
1. Is usb debugging enabled ? , pls check
2. is the device recognized ? to check this , install minimal adb and fastboot (link in the OP) then enter these command : fastboot devices after entering the command, the serial number of the device should appear , if you dont see the serial number , then :
3. install all drivers (adb , android usb drivers , etc )

Hey guys I have flashed twrp vid recovery, screen show as you said but when I boot into recovery, it's still stock

Đậu SôCiu said:
Hey guys I have flashed twrp vid recovery, screen show as you said but when I boot into recovery, it's still stock
Click to expand...
Click to collapse
It seems you did not read the guide carefully, after flashing TWRP,disconnect cable from pc ,turn off device by long pressing power button , then boot directly into recovery without allowing the device to boot into home screen at first boot.

jide1 said:
It seems you did not read the guide carefully, after flashing TWRP,disconnect cable from pc ,turn off device by long pressing power button , then boot directly into recovery without allowing the device to boot into home screen at first boot.
Click to expand...
Click to collapse
No I did it completely the same as guide. But I see now, my version is 13.8.16.36, and it's very hard to load a custom recovery without unlocking bootloader
Sent from my ASUS_Z010D using Tapatalk

Đậu SôCiu said:
No I did it completely the same as guide. But I see now, my version is 13.8.16.36, and it's very hard to load a custom recovery without unlocking bootloader
Sent from my ASUS_Z010D using Tapatalk
Click to expand...
Click to collapse
you probably mean version 13.8.26.36 and not 13.8.16.36 , the method works equally on firmware version 13.8.26.36 the most important thing is just to change the kernel version , you're probably doing something wrong.

jide1 said:
you probably mean version 13.8.26.36 and not 13.8.16.36 , the method works equally on firmware version 13.8.26.36 the most important thing is just to change the kernel version , you're probably doing something wrong.
Click to expand...
Click to collapse
I follow exactly what the OP mentioned above. But nothing happen. And this's mine. Have you rooted yours yet?? What is your version??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ASUS_Z010D using Tapatalk

Đậu SôCiu said:
I follow exactly what the OP mentioned above. But nothing happen. And this's mine. What is your version??
Click to expand...
Click to collapse
for TWRP to be succesfully installed , the kernel version must change to this :

New kernel root ok .
★✩★ TapTap in 7HD Rom ★✩★

S3V3N said:
New kernel root ok .
★✩★ TapTap in 7HD Rom ★✩★
Click to expand...
Click to collapse
please make your post more informative , if you have a way of installing TWRP and root without changing kernel version, pls post a comprehensive guide.

today I give AutoRootKernel v.2 how to write about the places here stranded
★✩★ TapTap in 7HD Rom ★✩★
---------- Post added at 05:19 PM ---------- Previous post was at 04:32 PM ----------
jide1 said:
please make your post more informative , if you have a way of installing TWRP and root without changing kernel version, pls post a comprehensive guide.
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone2/general/kernel-autorootkernel-asus-zenfone-max-t3388576

S3V3N said:
today I give AutoRootKernel v.2 how to write about the places here stranded
★✩★ TapTap in 7HD Rom ★✩★
---------- Post added at 05:19 PM ---------- Previous post was at 04:32 PM ----------
http://forum.xda-developers.com/zenfone2/general/kernel-autorootkernel-asus-zenfone-max-t3388576
Click to expand...
Click to collapse
How can I install autoroot?? I can't install twrp
Sent from my ASUS_Z010D using Tapatalk

[Guide] How to flash Factory Image using RSD Lite

DO AT YOUR OWN RISK!!!
I WILL NOT HELD RESPONSIBLE!!!
****BACKUP IMPORTANT DATA FIRST****
Download and Install RSD Lite 6.2.4 and Drivers
Extract the firmware.
****(Don't use USB Hub/Front USB Port/USB 3.0/3.1 Port)****
Now connect your phone to your PC (preferably Bootloader/Fastboot Mode).
Keep your phone connected with the PC and launch RSD Lite as an admin. (Run as administrator).
Click on the three-dot browser file button and select the .xml file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
****flashfile.xml will erase everything****
****servicefile.xml will not erase your Data****
IT IS RECOMMENDED TO ERASE EVERYTHING
Once done, click on Start to initiate the flashing process.
When the firmware is successfully flashed, your smartphone will automatically reboot.
Feel free to enhance this guide
Fastboot Guide (Advanced Users Only) by @The jOkEr!
https://forum.xda-developers.com/showthread.php?p=64101049

Thanks a lot. Very informative.

Do I need to have an unlocked bootloader for that?

I have enough time not to use rsd lite, I feel more secure with the command method
Enviado desde mi XT1563 mediante Tapatalk

derchrome said:
Do I need to have an unlocked bootloader for that?
Click to expand...
Click to collapse
I don't think so.
Sent from my XT1562 using Tapatalk

flopezm said:
I have enough time not to use rsd lite, I feel more secure with the command method
Enviado desde mi XT1563 mediante Tapatalk
Click to expand...
Click to collapse
Yes I agree with you!! But it is not noob friendly.
Sent from my XT1562 using Tapatalk

derchrome said:
Do I need to have an unlocked bootloader for that?
Click to expand...
Click to collapse
No! If you're flashing same build or newer build!
Sent from my XT1562 using Tapatalk

I've been using rsdlite since non-smartphone era (my first moto was the c390) and it had saved my bricked phones countless time.

gbt.bin file failed
pijes said:
I've been using rsdlite since non-smartphone era (my first moto was the c390) and it had saved my bricked phones countless time.
Click to expand...
Click to collapse
gbt.bin file failed
---------- Post added at 06:32 AM ---------- Previous post was at 06:29 AM ----------
kumeipark said:
DO AT YOUR OWN RISK!!!
I WILL NOT HELD RESPONSIBLE!!!
****BACKUP IMPORTANT DATA FIRST****
Download and Install RSD Lite 6.2.4 and Drivers
Extract the firmware.
****(Don't use USB Hub/Front USB Port/USB 3.0/3.1 Port)****
Now connect your phone to your PC (preferably Bootloader/Fastboot Mode).
Keep your phone connected with the PC and launch RSD Lite as an admin. (Run as administrator).
Click on the three-dot browser file button and select the .xml file.
****flashfile.xml will erase everything****
****servicefile.xml will not erase your Data****
IT IS RECOMMENDED TO ERASE EVERYTHING
Once done, click on Start to initiate the flashing process.
When the firmware is successfully flashed, your smartphone will automatically reboot.
Feel free to enhance this guide
Fastboot Guide by @The jOkEr!
(Advanced Users Only)
https://forum.xda-developers.com/showthread.php?p=64101049
Click to expand...
Click to collapse
i flashed a rom then my 2nd sim of xt1562 was not working so i decided to flash stock rom using rsd lite but when i am flashing then gbt.bin failed everytime
i am from india i am trying to flash stock rom XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-52_cid7_subsidy-DEFAULT_CFC.xml

sonubisht said:
gbt.bin file failed
---------- Post added at 06:32 AM ---------- Previous post was at 06:29 AM ----------
i flashed a rom then my 2nd sim of xt1562 was not working so i decided to flash stock rom using rsd lite but when i am flashing then gbt.bin failed everytime
i am from india i am trying to flash stock rom XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-52_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
gpt.bin usually related to partition table and your phone probably has an updated partition table newer than the one in the stock rom. If possible, get the latest stock rom, I heard that x play has received stock Nougat update probably you could flash that

pijes said:
gpt.bin usually related to partition table and your phone probably has an updated partition table newer than the one in the stock rom. If possible, get the latest stock rom, I heard that x play has received stock Nougat update probably you could flash that
Click to expand...
Click to collapse
Thats the problem , stock 7.1.1 images for Moto X Play not released till now

[email protected] said:
Thats the problem , stock 7.1.1 images for Moto X Play not released till now
Click to expand...
Click to collapse
Try flashing the other stock rom with number 107-70. I believe this is the latest for marshmallow

[email protected] said:
Thats the problem , stock 7.1.1 images for Moto X Play not released till now
Click to expand...
Click to collapse
pijes said:
Try flashing the other stock rom with number 107-70. I believe this is the latest for marshmallow
Click to expand...
Click to collapse
7.1.1 Out Now!!
Look here: https://forum.xda-developers.com/mo...o-x-play-india-brazil-official-final-t3691100

I know this is an old thread but I am trying to flash my 1926-7 Moto G4 Plus Retail Latin version.
I am able to reboot it using RSD Lite and then the phone goes into fastboot mode:
AP Fastboot Flash Mode (secure)
OEM_Locked
Console: Null
TRansfermode : USB connected
I must be missing a step, I also noticed that the RSD Lite Vanishes and yet in the task manager it still shows SDL.exe running for a while then vanishes.
But in the program it changes state:
I'm using the latest Version of RSD
Thanks in advance.