Rogers Razr HD 4.4.2 firmware request - RAZR HD Q&A, Help & Troubleshooting

Recently tried a few things on my Razr HD. Phone is unlocked, recovery partition is buggered. Tried to downgrade firmware to correct issues, now phone boots into fastboot on every power up. It mentions firmware flash failed in the fast boot screen. Phone is still on 4.4.2, unfortunately finding this firmware to reflash the phone is proving impossible.
Anyone have this available for download? 181.46.3.XT925.RCI.en.CA
Thank you.

daswunderkid said:
Recently tried a few things on my Razr HD. Phone is unlocked, recovery partition is buggered. Tried to downgrade firmware to correct issues, now phone boots into fastboot on every power up. It mentions firmware flash failed in the fast boot screen. Phone is still on 4.4.2, unfortunately finding this firmware to reflash the phone is proving impossible.
Anyone have this available for download? 181.46.3.XT925.RCI.en.CA
Thank you.
Click to expand...
Click to collapse
XT925 kitkat tracking thread, page 71

daswunderkid said:
Recently tried a few things on my Razr HD. Phone is unlocked, recovery partition is buggered. Tried to downgrade firmware to correct issues, now phone boots into fastboot on every power up. It mentions firmware flash failed in the fast boot screen. Phone is still on 4.4.2, unfortunately finding this firmware to reflash the phone is proving impossible.
Anyone have this available for download? 181.46.3.XT925.RCI.en.CA
Thank you.
Click to expand...
Click to collapse
Blur_Version.181.46.3.XT925.RCI.en.CA
https://mega.co.nz/#!FNIHELSK!-C_eaEspsPjTGWVz7E4ZXZ8kSjCdWWkQM72cR-IDX6A

Related

[Q] Help im a noob (bootloader question)

Hello,
Im using a previous boot loader for the 4.1 JB versions and would like to update to the latest boot loader, i have tried to look on these forums but nothing specific about updating. I dont know what version bootloader im on but could some one guide me to the steps and where i can get the files from.
olster said:
Hello,
Im using a previous boot loader for the 4.1 JB versions and would like to update to the latest boot loader, i have tried to look on these forums but nothing specific about updating. I dont know what version bootloader im on but could some one guide me to the steps and where i can get the files from.
Click to expand...
Click to collapse
Well im assuming your unlocked, so if you flash an asus stock firmware for twrp it will upgrade the bootloader also. From memory i think i flashed the bootloader file in the energy rom thread, but i wouldnt recommend that method unless youve got access to nvflash.

Bricked Recovery

Greetings,
I recently rooted my Verizon 4.4.2 S3 using TowelRoot. (SCH-I535) Afterward I attempted to flash TWRP using ODIN. I kept getting an error message when flashing. I think tried TWRP Manager. I selected the proper IMG and flashed. It said flash successful. When I enter recovery I receive a LARGE yellow caution triangle with the message, "System Software not Authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest VW store for help."
I attempted to flash the factory recovery (Verizon-SCH-I535-StockRecovery.tar) using ODIN. It says the flash is successful but I still receive the same error message. My flash counter is at zero. Any idea how I can either get my factory Recovery back or get a functional recovery?
Thanks so much!
The bootloader is locked on 4.4.2 which makes having a custom recovery impossible. Try to flash the full NE1 image in ODIN. Here's the link:
http://forum.xda-developers.com/showthread.php?t=2795659
BattsNotIncld said:
The bootloader is locked on 4.4.2 which makes having a custom recovery impossible. Try to flash the full NE1 image in ODIN. Here's the link:
http://forum.xda-developers.com/showthread.php?t=2795659
Click to expand...
Click to collapse
Thanks. I ended up using the Verizon repair tool which actually did a pretty good job. It put 4.4.2 back on unfortunetly. After that it was Towel Root then TiBu restore. So is safe strap the only way around the locked bootloader? Can I JTAG?
lilbordr said:
Thanks. I ended up using the Verizon repair tool which actually did a pretty good job. It put 4.4.2 back on unfortunetly. After that it was Towel Root then TiBu restore. So is safe strap the only way around the locked bootloader? Can I JTAG?
Click to expand...
Click to collapse
Yes safestrap is the only way around. Unfortunately you can only flash NE1 based ROMs via safestrap and there aren't any custom ones out yet that I know of. I believe the devs need kernel source released before whipping up some updated ROMs with the new base.
Regarding JTAG the guys at mobiletechvideos apparently found a way to downgrade the s3 to the 4.1.2 firmware which would allow you to unlock your bootloader again. I have not heard of anyone on here that has tried that service, though.

[Q] Can i go back from 5.0 to kk 4.4.4 ?

I mean, i uptaded my moto g to Lollipop. But i didnt like it so much, so i've downgrade the phone to kk. But my device doesnt reboot anymore. It got stucked on 'Warning bootloader unlocked' screen. Tried restoring so much firmwares, roms, etc, no solutions.
How can i revive my phone? Hope you understand my fking english.
aybarchu said:
I mean, i uptaded my moto g to Lollipop. But i didnt like it so much, so i've downgrade the phone to kk. But my device doesnt reboot anymore. It got stucked on 'Warning bootloader unlocked' screen. Tried restoring so much firmwares, roms, etc, no solutions.
How can i revive my phone? Hope you understand my fking english.
Click to expand...
Click to collapse
I think the only way to revive is to go back to lollipop
OldYellowBricks said:
I think the only way to revive is to go back to lollipop
Click to expand...
Click to collapse
Cant. Tried flashing again dual sim br and then the ota but i get ' Installation aborted ' everytime.....
It sounds like your Bootloader has been updated so you can no longer boot the KitKat kernel. Can you please state what version your Bootloader is now?
For example mine is: 41.13
This weekend I will try to build a Stock ROM based on Retail DS BR Lolliopop. That should get your phone back, as long as you have a custom Recovery installed.
Perhaps you could try to flash the full latest 4.4.4 Brazil rom; the OTA update to Lollipop might work on this one. Just not sure if it is safe to revert to an older bootloader on Moto G, never tried this myself.
If this doesn´t work or you don´t want to try, you will need someone to upload a full 5.0 ROM and look for a backup phone until then
My bootloader ver. is 41.18
i've tried reflashing br dual sim version and then the 5.0 ota. But it doesnt work.
Instructions: http://forum.xda-developers.com/showthread.php?p=57297928
lost101 said:
Instructions: http://forum.xda-developers.com/showthread.php?p=57297928
Click to expand...
Click to collapse
Doesnt work that instructions. Tried every known method
lost101 said:
Instructions: http://forum.xda-developers.com/showthread.php?p=57297928
Click to expand...
Click to collapse
Follow the instructions here http://forum.xda-developers.com/mot...33-ota-5-0-lollipop-brazilian-t2963565/page47 by @AgentChaos

back to stock help

A customer brought his phone and he tried to flash on his own, he did not unlock the bootloader. I've tried to flash without unlocking the bootloader but have no luck getting back to stock. Since the phone will not boot into a usable menu I cannot unlock the bootloader. I have done a lot of research and cannot find a flawless way to do this. Is there anyone that has a direct way to fix this. Photos attached are when the phone is booted up normally, and in download mode. Thank you in advance.
https://www.dropbox.com/s/ul1vw5dkkycpqeo/20150129_164414.jpg?dl=0:
https://www.dropbox.com/s/siy19wfk84l20my/20150129_164457.jpg?dl=0:
https://www.dropbox.com/s/hpxpj1efxkisd17/20150129_164717.jpg?dl=0:
https://www.dropbox.com/s/mxnoergaz9ib1b3/20150129_164632.jpg?dl=0:
razor1 said:
A customer brought his phone and he tried to flash on his own, he did not unlock the bootloader. I've tried to flash without unlocking the bootloader but have no luck getting back to stock. Since the phone will not boot into a usable menu I cannot unlock the bootloader. I have done a lot of research and cannot find a flawless way to do this. Is there anyone that has a direct way to fix this. Photos attached are when the phone is booted up normally, and in download mode. Thank you in advance.
Click to expand...
Click to collapse
Unfortunately, the bootloader cannot be unlocked on your customer's Verizon S3. Based on the Dropbox photos of Download mode, I'd wager that phone was on KitKat 4.4.2 VRUDNE1 before they attempted to modify it. That software comes with a locked bootloader that has not been unlocked. VRUDNE1 4.4.2 is the only software that can be flashed on the phone using Odin. Flash the VRUDNE1 tar in the PDA section of Odin and it *should* allow you to boot into the rom after it has flashed the firmware.
What have you and also the customer attempted to do to the phone?
Edit: I believe Odin 3.07 can be used, if not then you would need a newer version of Odin for Windows computers.
thank you very much, that got me back to stock at least. I appreciate the help! Next I need to wait for the 4.4.2 bootloader unlock if it ever comes out. Thanks again!
razor1 said:
thank you very much, that got me back to stock at least. I appreciate the help! Next I need to wait for the 4.4.2 bootloader unlock if it ever comes out. Thanks again!
Click to expand...
Click to collapse
To be realistic, there won't be a bootloader unlock method on this phone any time soon. The phone has been bootloader locked since 2013 OTAs without an unlock tool found. The only thing you can do is use Safestrap which hijacks the boot process and allows the user to dual boot another VRUDNE1 4.4.2 TouchWiz rom. Our version of Safestrap requires the stock VRUDNE1 4.4.2 kernel in order to boot another VRUDNE1 rom. They also need to flash VRUDNE1 kernel modules in order to have working wifi as well. All the info you need can be found here in our sticky: http://forum.xda-developers.com/showthread.php?t=2639337
This means no AOSP roms, no custom kernels, no using roms on 4.3 or earlier, and as stated before no bootloader unlock.
Sent from my SCH-I535 using Tapatalk

Help please! Moto G stuck in bootloader, any help is appreciated!

Hey All,
I have a Moto G 2013 (1st gen I believe). A while back, I wanted to install lollipop without it being available so I flashed the Brazil 5.0 ROM. Now, for some reason it won't boot and I got my phone stuck in bootloader. I can go to TWRP and the bootloader mode right now. I'm not sure what version it is, but I think its the XT1032 (non-lte for sure) and I've used it on Bell, Canada
.
I'm trying to follow a guide to restore back to stock but im not sure which model I should be downloading the firmware for. Can anyone help?
I'm using this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and I tried a XT1032 ROM (Brazil) but when following the first command "mfastboot flash partition gpt.bin" didn't work. Should I just ignore this and move forward? I believe somewhere in the thread it said to ignore it but I'm not positive. Note: I dont want service, I want to use it as a glorified mp3 player for my car
Thanks in advance and any help is appreciated!
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
mohitrocks said:
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
Click to expand...
Click to collapse
It is strange that you can flash ROM in recovery but cant flash rec, my suggestion is checking your rec file,substitute with a Twrp rec and flash again. if success, you can try to flash a zip ROM.
Thankyou for the response! I appreciate it. Sorry, I should've been more clear. I was trying to flash official firmwares through bootloader, not roms. I tried flashing two different firmwares (XT1032, as per the barcode setting on my bootloader mode), and I keep getting errors when trying to flash using adb commands. It sends the files correctly but fails at writing them. I'm not sure what the issue is, but it may be because I was on Android 5 (lollipop) and I was trying an older firmware (i.e. older partition table). Currently trying a 5.0 firmware (brazil XT1032!) If anyone has any advice, please let me know! Thanks again!

Categories

Resources