[Completed] Samsung Galaxy Tab 3 P5210 Bricked - XDA Assist

Hello
I will tell you what happenned. I wanted to root my Tab 3 so I looked googled for the newest root. I found this one: http://androidxda.com/root-samsung-galaxy-tab-3-10-1-gt-p5210. After rooting the tablet, it would not turn on, it got stucked on the Galaxy Tab 3 screen each time I rebooted it. While I was downloading the stock rom (https://mega.co.nz/#!7BQkCQrT!hdJXKXTVZe_Rx63CYE3xPESxxNr9FWqgGQgmOz1DH3A) I tried to root my tablet using another post (http://forum.xda-developers.com/showthread.php?t=2531784). And now it wont leave Odin mode. It is left on that screen and I cannot leave it, I tried holding power button for minutes, combining it with volume up and volume down too, but it wont leave Odin mode. What can I do? Will I have to wait for the battery to empty? I dont know if it will even charge.
Thanks

Please review Tab 3 8 official kikat update (T310) + root instrucions to get out of your current situation.
If you ever want to Root again, please follow Root the Samsung Galaxy Tab 3 8.0 and Install Custom Recovery
or [GUIDE] Recovery and Root for P5210 4.4.2 ------My Way--------- you may post on that thread if you have questions.

Perseus said:
Please review Tab 3 8 official kikat update (T310) + root instrucions to get out of your current situation.
If you ever want to Root again, please follow Root the Samsung Galaxy Tab 3 8.0 and Install Custom Recovery
or [GUIDE] Recovery and Root for P5210 4.4.2 ------My Way--------- you may post on that thread if you have questions.
Click to expand...
Click to collapse
But my tab is the 10.1" isnt there any problem?

You may want to post on that thread to make sure. I don't have this device so I can't say for a fact.

Related

ROOT failed for galaxy tab 2 p3100 7.0

hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Root P3100 tab2
sajan1991 said:
hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Click to expand...
Click to collapse
I rooted my tab2 p3100 yesterday by the method posted on other web page but can't post link here as limitation to new user....
hem0101 said:
I rooted my tab2 p3100 yesterday by the method posted on other web page but can't post link here as limitation to new user....
Click to expand...
Click to collapse
did it worked ??? dunno wt went wronf for me
sajan1991 said:
hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Click to expand...
Click to collapse
I learned how to root my tab(Samsung Galaxy Tab 2 7.0 GT-P3100) from the following website. Type "how to root samsung galaxy tab 2 7.0 GT-P3100" in Google and click the first link which is from android authority. It works well
To get the original firmware back type in Google "How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware tsar 3000" and click the first link.
Note:
From the firmware website, when u get ur device specific firmware there will be only one file but it says four files in the tsar website. Just use that one file with the PIT file in Odin and flash it to your tab using download mode in ur tab(there are more things in the website u need to do).
Press thanks if this helped u.
ssqw1 said:
I learned how to root my tab(Samsung Galaxy Tab 2 7.0 GT-P3100) from the following website. Type "how to root samsung galaxy tab 2 7.0 GT-P3100" in Google and click the first link which is from android authority. It works well
To get the original firmware back type in Google "How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware tsar 3000" and click the first link.
Note:
From the firmware website, when u get ur device specific firmware there will be only one file but it says four files in the tsar website. Just use that one file with the PIT file in Odin and flash it to your tab using download mode in ur tab(there are more things in the website u need to do).
Press thanks if this helped u.
Click to expand...
Click to collapse
thank you so much,, i'll hav it a try
sajan1991 said:
thank you so much,, i'll hav it a try
Click to expand...
Click to collapse
http://galaxytabblog.com/galaxy-tab-2-7-0-ics-root
Try fix.recovery posted there ..,

[Q] Samsung Galaxy S I9000 root attempt failed

Hello.
I tried rooting my Samsung Galaxy S using Unlock Root. When it got to step 2 the Download Mode screen appeared and nothing happened for 10 minutes then I unplugged the USB cable got the baterry out and then put it back in and a black screen with a Phone to Computer icon appeared, I managed to get into Download Mode but I don't know what to do from here. Is my phone bricked? Please respond.
No need to panic.
You can always flash official firmware via ODIN from download mode.
Check Galaxy Si9000 general thread with official firmwares and instructions.
Make sure you have enough battery life.

[Firmware] Unbrick & restore Galaxy Tab 3 7in SM-T210R

[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile

[Q] GALAXY NOTE 3 WILL NOT ROOT. help

I tried rooting my SM-N900 using odin 3 and Cfautoroot-t03g-t03gxx-gtn900.tar.md5 on android 4.4.2 N90XXUDNB2. It always stopped on cache.img. On the phone, the progress bar also stopped at about 25% completion. Then I get the Fail instead of Pass. I tried several times and kept getting the same. I had to use odin to restore the N90XXUDNB2 in recovery mode to get my phone to boot. The void is now set to 1. Please help. I'm very frustrated. Thank you.
This is not Galaxy Note 3 forum, it's galaxy 3
Z4 ROOT
Use Z4 root ....
It will be confirmly rooted

[Completed] Need Help Fixing my Semi-Bricked Galaxy S5

EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
FreakLikeChewy said:
EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
It's good to hear that you managed to revive your phone. Many of us find it convenient to install a custom recovery such as TWRP which makes backing up and restoring, switching ROMs, and many such activities much easier. XDA happens to have an active and friendly area dedicated to the Samsung Galaxy S5, and specifically to the T-Mobile version at http://forum.xda-developers.com/tmobile-galaxy-s5. I suggest you search that area or simply post your question in the Q&A forum there at http://forum.xda-developers.com/tmobile-galaxy-s5/help where our experts will be most likely to be able to guide you.

Categories

Resources