[Q&A] Me! ROM - Pure Vanilla - Sony Xperia C

Q&A for Me! ROM - Pure Vanilla
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Me! ROM - Pure Vanilla. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

SIM card not being recognized.
Shikhar A said:
Me! ROM - EXPERIMENTAL ​
Hey Guys I am Shikhar A .. and a ROM chef for XOLO Q800 .. I wanted to port some romz for xperia C too so , i have started this project .
This ROM is AOSP based with many features...
I will need testers as I DONT HAVE AN XPERIA C, so understand this not a ROM for basic USERS yet .. still a lot has to be done for daily useage
IMPORTANT STUFF
* Those WILLING to test it , I am not responsible for any kind of damage to your mobile
* Please report BUGS In full detail
Instuctions:
Instructions : Have a nandroid backup
Copy the .zip to SD CARD
Boot TO Recovery (CWM or anything else)
Wipe System ,Data ,Dalvik and Cache
Flash the zip
Reboot ..
Wait for it to boot.. it may take a while.. if it exceeds more than 10 -15min ..
Report!
DOWNLOADS :
Test 1 : http://d-h.st/jEt
XDA:DevDB Information
Me! ROM , a ROM for the Sony Xperia C
Contributors
Shikhar A
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Created 2014-04-24
Last Updated 2014-04-24
Click to expand...
Click to collapse
After installing your Rom, SIM wasn't found. So I did a cwm restore. But then also it wasn't recognized.
so I did a factory reset. But no use. Please help Me out here.

try hard reset with SP Flash tools

NOT work
xperia C in just test it , and gets the infinite loop.

huh, new ROM, i'm looking forward to this, Downloading it now.

Related

[Q&A] Lollipop - OPO - Pure Aosp 5.0 - Test Build only -16/11/14

Q&A for Lollipop - OPO - Pure Aosp 5.0 - Test Build only -16/11/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lollipop - OPO - Pure Aosp 5.0 - Test Build only -16/11/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bugs
navendugoyal said:
This is a pure AOSP 5.0 - Lollipop - build compiled from source .
I would highly recommend it to be used only by developers and advanced users.
The build just completed and am uploading the image files for you to do whatever you please.
The idea is to get it out there so others can take a look and use it to make it better.
Please give your comments and updates if you do plan to use it on your device.
ADVISORY -
First build -likely to be highly unstable.
I am not responsible for any damages caused whatsoever.
This is for test purposes only, however it should work well.
I am out of town for next 24 hrs.. therefore can't provide too much hours into it as of now. Will await all of your responses.
images uploading - Links soon..
Regards
Click to expand...
Click to collapse
Will the bugs be of the current CM12 Lollipop that we are facing or you have rectifed some of the issues? Thanks for upcoming build btw. It would be great if you could provide us with the link to the gapps thatworks with this rom best and a little intructions on how to flash it for noobs friendly if they choose to proceed with the flashing of this dev rom.
Awesome! Thank you.

[Q&A] [ROM] [4.1.2] [Young GT-6310] GNU-ROM™

Q&A for [ROM] [4.1.2] [Young GT-6310] GNU-ROM™
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.1.2] [Young GT-6310] GNU-ROM™. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Q&A
Q: Based firmware which one?
A: XXANA1 Spain (Yoigo) (Black Edition) July 2014, http://www.sammobile.com/firmwares/download/32722/S6310XXANA1_S6310YOGANA1_YOG.zip
thanks a lot.
Why does the recovery does not read the ROM zip file?
I copied the ROM in my sdcard and booted into CWM recovery. But when I try to flash the ROM from sdcard, it comes with the following:
Code:
Can't open /sdcard/royss_signed_122114_011303.zip
(bad)
Installation aborted.
I also tried by mounting different partitions and wiping the partitions. But they don't work.
The ROM zip file is fully downloaded, as I can open it from the ZIP explorers in my phone as well as PC.
Why am I unable to flash the ROM?
PS: My phone is Samsung Galaxy YOung GT S6312.
S6312
can you make a version for the DUOS variant?
or can you help me doing one like it?
thank you its great.
but i feel notification drop down is a little slow and sometime it suddenly goes restart!
is there any way to solve it?
ive tried seeder and kernel tunner but didnt help...
patch version for galaxy young S6312
can u send patch for s6312 .....ur gnu rom working on my phone s6312 only mobile network is not working .....plzzz send patch working for mobile network
hello,
1...What version of Quickpic is used in GNU ROM v2?
The probIem is I updated quickpic app to the latest version and i cant load any wallpappers anymore
with the launcher I use.
2...Can I install the Dark Theme for GNU ROM from CWM to GNU ROM version 2?
3...Please try to reply
Thank you

[Q&A] Version ROM Series 007 - Alice Project Reborn V8.1 - 8/3/15

Q&A for Version ROM Series 007 - Alice Project Reborn V8.1 - 8/3/15
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Version ROM Series 007 - Alice Project Reborn V8.1 - 8/3/15. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dialer prooblem
I am using Allice Project Reborn now.
When i go to dialer and search anything it force closes everytime.
Please solve it and some tweaks are missing.
Otherwise rom is perfect and battery backup is very good.
@Jagadish-ravi - thanks buddy
@Vinay Patani
Use android L dialer. @Jagadish-ravi using it
Which tweaks r missing???
Tweaks required for Alice
Please add all the tweaks like Eeco Os to Alice rom coz that rom is really most attractive but kinguser is too alow on it and after updating it to Superuser ,default storage can not be changed apps like Titanium backup for me not working.
I tried 3 times by reinstalling rom but can not solve the problem.
If you are agree then make a rom just like Eeco Os with superuser and the features already there and if some left then add it also.
Also ask other members for their need and then after make a new rom.
You are really a rom machine bro.
Thanks again @avi3230
Gmail force closes
In the Alice reborn
Gmail,Email force closes every time......
 @avi3230

[Q&A] CM12S released!

Q&A for CM12S released!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM12S released!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installation Failed
was using nightly before flashing the cm12 offical ota and using fanco kernel. Help please
For Oxygen OS to CM12s
Everyone on Oxygen OS can also flash this zip if you have the latest version of TWRP
I just did it and it works fine for me.
Steps to Follow : -
1. Downloaded cm-12.0-YNG1TAS0YL-bacon-signed.zip
2. paste it to ur phone
3. reboot into recovery
4.wipe dalvik cache,cache, system ,data ( do not wipe internal storage and usb otg)
5. Flash cm-12.0-YNG1TAS0YL-bacon-signed.zip(if you flash Super SU before reboot it is all right)
6. Reboot
HAve fun guys
Regarding.....CM12S released
Hi, does this give Lollipop 5.1??
Currently, having L5.1 with Unofficial CM12.1....curious to know.
Can some one pls reply
Cheers
SriVasYntBlruK said:
Hi, does this give Lollipop 5.1??
Currently, having L5.1 with Unofficial CM12.1....curious to know.
Can some one pls reply
Cheers
Click to expand...
Click to collapse
No this does not give 5.1
It is 5.0.2

[Q&A] [ROM] [MIUI6 v5.6.4 multilanguage wiko rainbow/mmx a120c2c/aguario

Q&A for [ROM] [MIUI6 v5.6.4 multilanguage wiko rainbow/mmx a120c2c/aguario
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [MIUI6 v5.6.4 multilanguage wiko rainbow/mmx a120c2c/aguario. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
can i have a link?
added.:good:
on settings > wallpaper crashes
kernel still uses stock 3.4.67 instead of moonrotation's WR2 1.1 / 3.4.107
HELP ME
I follow what you have given instruction. First of all I'm using myphone Agua Rio version 2 and not the version 1 or the first released of myphone (manufacturer) anyway as I said I follow your instructio first I change my of to wiko 13 and after it was been flash using sp flash I boot the device and I rooted by kingroot and I had made sucesfully so I download Flashify from playstore and launch and flash the Phil recovery after it I made clean my device and clean and clean to make it sure there will be no conflict so I wait and it's working but the problem is the camera is not working and the flashlight of my phone so I search and I saw a zip so I download them all and try but nothing works. So please help me I really really like this room. ???
after flashing version 5.7 it doesnt boot....can i know y...i already have 5.6 installed on mu canvas a120...
Hi
Phone works perfectly except the camera and the flash.
HI., Plz update roms for micromax a121 canvas elanza 2.

Categories

Resources