Hi, I updated adb and fastboot. Very familiar with both. However I can not get adb sideload to send a zip. Any ideas?
Not enough information. What happens when you try to sideload? Are the developer tools and ADB driver installed properly?
What's the error, that's what we need.
Related
I cant able to use the adb. It's not listing my mobile.
Even though, I've enabled my USB Debugging, It's not listing my device.
Last day it worked well.
Any idea guys? I'm still struggling with this problem.
That's problem in the driver and the custom ROM. I myself solved he problem.
Well
swordfish said:
Well
Click to expand...
Click to collapse
if device is not shown in adb then there will be some possibilties like
you haven't properly installed the driver or older version of drivers
or you haven't have all the binaries files to run adb command
or previous adb server was not killed
to prevent that
install updated drivers,check whether you have all binary files
and for killing adb server try these commands
adb kill-server
adb start-server
adb devices
hit thanks if helped
I try to hard reset but I'm still stuck on loading screen. How do I add a zip file to my sd so I can flash it, since it doesn't even detect my oneplus on my computer? Please help me and lend me your knowledge and power =].
Can you boot in bootloader and connect it through adb and fastboo with your pc? in that case it would be easy to reflash everything
I can boot into fastboot and TWRP but I'm wondering how can I add file into my internal hard drive since it doesnt detect the phone on my computer?
Any help with some instructions would be really nice =] :good:
Do you see it using "adb devices" or "fastboot devices" ?
If not, you must update your adb drivers on your computer and reboot it
right now its on MTP USB Device as my device on my Device Manager, can you link me to the proper usb driver? Because I"m pretty sure I updated it and it was working while my phone is working. Also how can I check if its using adb devices?
bud77 said:
Do you see it using "adb devices" or "fastboot devices" ?
If not, you must update your adb drivers on your computer and reboot it
Click to expand...
Click to collapse
Also it said "Windows has determined the driver software for your device is up to date" but doesnt detect my phone?
Anyone still here so they can help me?
So as asked previously, when you connect via fastboot, and boot it into TWRP, do you see it via adb ("adb devices" command in the platform-tools folder)? Did you try adb push <filename> /sdcard/ ?
yes i see adb push , but there's no file there. How can i add file there?
Dzhedaj said:
So as asked previously, when you connect via fastboot, and boot it into TWRP, do you see it via adb ("adb devices" command in the platform-tools folder)? Did you try adb push <filename> /sdcard/ ?
Click to expand...
Click to collapse
Basically i'm in TWRP and i dont see any thing in recover or etc or in my sd, all blank so how can I put an image there to flash?
Anyone still here to have any answers to help?
which jeithis
http://i.imgur.com/378HzRp.png also get this image also
Use an adb push command to send a ROM zip to your phone.
Transmitted via Bacon
@M I N E, go read the sticky posts in the general section. It will explain how to do an adb push command.
@timmaaa and others have done a great job with some write ups for this device.
timmaaa said:
Use an adb push command to send a ROM zip to your phone.
Transmitted via Bacon
Click to expand...
Click to collapse
Or do a factory wipe then go into TWRP -> Advanced -> ADB Sideload -> Swipe
adb sideload <name-of.zip>.zip (ensure the .zip is in the same folder as your fastboot/adb) and then it'll send the zip over to the phone and flash.
I prefer the adb sideload method as it pretty much pushes the file over to the phone and then flashes it afterwards.
Either method is fine though.
If OP has problems with drivers, I recommend using http://forum.xda-developers.com/showthread.php?t=2386956 they work great.
what is the push load command? How can i push something if i dont have any file on my phone to flash? can you guys type out the command?
M I N E said:
what is the push load command? How can i push something if i dont have any file on my phone to flash? can you guys type out the command?
Click to expand...
Click to collapse
Read the post above you that I posted. Use that command as well as the instructions and you can flash a file using adb sideload.
well I try factory swipe nothing there, i check the TWRP , no files is there i mean nothing. And I cant do adb push because my when i type adb devices it doesnt recognized, because how can i turn on debugging if my phone doesnt have any rom?
M I N E said:
well I try factory swipe nothing there, i check the TWRP , no files is there i mean nothing. And I cant do adb push because my when i type adb devices it doesnt recognized, because how can i turn on debugging if my phone doesnt have any rom?
Click to expand...
Click to collapse
You're not reading my message properly. I'm telling you to do adb sideload. Please read what I said carefully word-by-word.
Or do a factory wipe then go into TWRP -> Advanced -> ADB Sideload -> Swipe
adb sideload <name-of.zip>.zip (ensure the .zip is in the same folder as your fastboot/adb) and then it'll send the zip over to the phone and flash.
I prefer the adb sideload method as it pretty much pushes the file over to the phone and then flashes it afterwards.
Click to expand...
Click to collapse
The whole point of adb sideload is that you're sideloading a flashable zip that is not on your phone but on your computer and you're pushing the file onto your phone which will followup with flashing the zip.
You need to be typing adb sideload on your computer with the proper environment for adb set up with the proper drivers installed if you haven't already.
So I finally undated my PC from Ubuntu 12.04 to 16.04. The good new is I have full MTP access to my G3 now. However, ADB is no longer recognized. ADB and Fastboot are located on a separate drive from the OS, so I am trying to run the same file from the same HD. Any suggestions?
You need to run adb in root. Are you doing that?
Sent from my SM-T530NU using XDA-Developers mobile app
How are you trying to use ADB? It doesn't work when your phone is on fastboot mode
Tel864 said:
You need to run adb in root. Are you doing that?
Sent from my SM-T530NU using XDA-Developers mobile app
Click to expand...
Click to collapse
I did try that without success even though I successfully ran ADB without root with 12.04. Only Fastboot needed root.
For some reason the file is not recognized as an executable file. Below is a screen copy:
Code:
$ ls
adb fastboot twrp-osprey-3.0.0-r2.img
commands.txt twrp-osprey-2.8.7-r5.img twrp-osprey-3.0.2-r1.img
$ adb
The program 'adb' can be found in the following packages:
* adb
* android-tools-adb
Try: sudo apt install <selected package>
$
Henriquefeira said:
How are you trying to use ADB? It doesn't work when your phone is on fastboot mode
Click to expand...
Click to collapse
I have not even got that far. See post above, "adb" is not recognized. I would rather not install the adb development package if I can avoid it.
Its fastboot flash recovery not adb flash
Henriquefeira said:
Its fastboot flash recovery not adb flash
Click to expand...
Click to collapse
The commands is not my issue. I have a list of commands I have run successfully many times. My issue is with the new OS (in the same PC) not recognizing adb. When I boot to the old OS, no issue, back to the new OS, command is not recognized..
My list of commands is as follows:
Code:
adb devices
adb reboot bootloader
sudo fastboot devices
sudo fastboot boot twrp-osprey-3.0.2-r1.img
Henriquefeira said:
Its fastboot flash recovery not adb flash
Click to expand...
Click to collapse
Re-reading your reply, I think you mis-read my code box. Next to the dollar sign my command "ls". Below is the OS response. Next $, command is "adb", and below the OS response.
I figured it out. So in Ubuntu 16.04 my command needs to be:
"./adb"
where in 12.04 "adb" worked.
MrTooPhone said:
I figured it out. So in Ubuntu 16.04 my command needs to be:
"./adb"
where in 12.04 "adb" worked.
Click to expand...
Click to collapse
This implies execution from the current directory... Are you sure you don't have multiple 'adb' executables installed? Check the command 'which adb' to see.
Sent from my MotoG3 using Tapatalk
acejavelin said:
This implies execution from the current directory... Are you sure you don't have multiple 'adb' executables installed? Check the command 'which adb' to see.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Pretty sure I had multiple 'adb' executables in 12.04.
i really could use some help friends im having problems with adb on windows when my device is on adb can see it of course
C:\adb>adb devices
List of devices attached
ZY22236P94 device
the problem is when its in bootloader mode adb cant seem to see it i have all drivers installed and i cant understand why im getting this error i want to install a recovery and i cant i currently have know recovery installed and i really need to rest my phone cause of a lot of software issus this is the message that get when bootloader mode
C:\adb>adb devices
List of devices attached
it shows nothing attached on windows devices manager it shows motorola adb interface connectad and running fine so i cant understand what im doing wrong please i really need some help here mates
steffano said:
i really could use some help friends im having problems with adb on windows when my device is on adb can see it of course
C:\adb>adb devices
List of devices attached
ZY22236P94 device
the problem is when its in bootloader mode adb cant seem to see it i have all drivers installed and i cant understand why im getting this error i want to install a recovery and i cant i currently have know recovery installed and i really need to rest my phone cause of a lot of software issus this is the message that get when bootloader mode
C:\adb>adb devices
List of devices attached
it shows nothing attached on windows devices manager it shows motorola adb interface connectad and running fine so i cant understand what im doing wrong please i really need some help here mates
Click to expand...
Click to collapse
adb doesn't work in bootloader mode, that is when you use fastboot... I think you should review the process involved in installing recovery.
Sent from my MotoG3 using Tapatalk
So I want to flash stock rom back but when flashing my laptop freeze and I cannot do anything....tried many times and same problem..try run adb command in platform tool and adb device list not showing my pixel..how to fix this problem?
The first time I got my pixel I had to manually install drivers from the official android developers website, after that my PC detected my phone when in ADB and fastboot.
Make sure you also have the latest platform tools (28.0.2), get them from here
My adb detect my pixel in fastboot command..but in adb command cannot detect "adb devices"
TENN3R said:
The first time I got my pixel I had to manually install drivers from the official android developers website, after that my PC detected my phone when in ADB and fastboot.
Make sure you also have the latest platform tools (28.0.2), get them from here
Click to expand...
Click to collapse
The latest is actually 29.0.1. They haven't been updating the changelog. Try to download it now, and you'll see.
:good:
Hi all,
I've seen I haven't been the only one with this problem, but I haven't seen a clear solution yet. My Poco F2 pro miui global gets recognised by adb, and by the unlocking software when in fastboot, but not by adb in fastboot. I am trying to install TWRP. I have tried various drivers (currently running one from the official mi forum), running the command prompt, powershell and terminal with admin rights, killing and starting the adb server, using a windows or linux system to do it, made sure to enable USB debugging, file exchange and permanently accepting fingerprints after connecting. But to no avail. Any suggestions on what to try next?
Thanks in advance.
herkio1 said:
Hi all,
I've seen I haven't been the only one with this problem, but I haven't seen a clear solution yet. My Poco F2 pro miui global gets recognised by adb, and by the unlocking software when in fastboot, but not by adb in fastboot. I am trying to install TWRP. I have tried various drivers (currently running one from the official mi forum), running the command prompt, powershell and terminal with admin rights, killing and starting the adb server, using a windows or linux system to do it, made sure to enable USB debugging, file exchange and permanently accepting fingerprints after connecting. But to no avail. Any suggestions on what to try next?
Thanks in advance.
Click to expand...
Click to collapse
Adb use Adb.exe and fastboot fasboot.exe (differente programs)
For Twrp you must use this command " .\fastboot flash recovery twrp.img "with CMD or Powershell.
download sdk Platform tools https://developer.android.com/studio/releases/platform-tools.
extract platform-tools folder.
Put this twrp https://androidfilehost.com/?fid=17248734326145679747 into platform tools folder
Phone in fastboot mode power and volume - (Obviously the phone must be detected on the pc)
use this command " .\fastboot flash recovery twrp.img "with CMD or Powershell.
Solved thanks, I used fastboot for fastboot mode and adb for in twrp/booted in system. I must have mistyped because I could flash the twrp.img file but it then gave me an error when trying to boot into it.