Hey Guys,
I'm new to this and I don't think I am in the right section.
I have a Samsung Galaxy Mini GT-S5570.
My goal is to get 4.4 on it.
Currently it has 2.3 but this is far too low for what I need it for.
I have tried to put CM 11 on it but once I installed it, I would get a message saying "Unfortunately, Android Keyboard (Aosp) Has Stopped".
I have tried installing the files from rootmyandroid (update-samsung-galaxy-mini-s5570-kitkat-4.4)
The CM11 installs but when I try install GApps I get a message stating that the installation has aborted with status 0.
I am not sure but I am going to take a wild guess and say that the keyboard stops because the GApps does not install.
If anyone has any tips it would be awesome.
Regards,
Huza91
Related
Hi Newby here!
Samsung Galaxy 7 GT-P1000
I somehow stumbled my through rooting my stock tab using odin. failed to install a few Roms for Jellybean, but eventually manager to get AOKP build 38 (android 4.04) running. Like an idiot though, the Gapps file was a newer one intended for Jellybean Rom. It went on, however I now get the 'Unfortunately, Andoid Keyboard has stopped' message. I have looked around and tried the force stop and clear cache, but sadly no fix.
what do I do now? can I just install a more recent ROM over the top?
can i install a rom thats not AOKP now I have AOKP on there?
I basically want Jellybean on my tab rather than ICS.
Can you provide me a link to the Rom and relevant Gapps Jellybean, and is it the just the same process as the initial ones I put on?
OR, can I just put an older version of Gapps on and it will resolve my issue. (I want jellybean but can live with ICS if working properly)?
Sorry for the volume of questions... I am just at a loss of what to do as I dont know what I can and cant do.
For the record I dont have Nandroid or bootstrap on here. they were not mentioned in the tutorial and I had already cleared everything off my tab so wasnt worried about losing anything on it.
Thanks in advance for any enlightenment...
As I sit here now I managed to resolve both issues. I just managed to locate and flash the correct Gapps. reset/wipe, del cache, delete dalvik cache, run akop and run replaced Gapps and hey presto.. ICS running smoothly on my GT7 P1000. Runs snapseed, chrome browser just fine. All my social apps are far better in pics than gingerbread. Loving it. Many hours lost on the steep learning curve.
One question remains.. can I flash a from on here by a different mod? Cost I have seen jellybean for the P1000. Don't know whether to quit while I'm ahead, or now I'm getting the gist, mod to paranoid androids jellybean.
I am a new member to XDA, though I have been to this site countless times before, and finally thought it was about time to join. I am not a noob to rooting or flashing or any of that-though I am still learning.
I have come across a problem and need help. I have a T-Mobile SGS III SGH-T999 and was running 4.1.2 Axis M rom, but I decided try something else. I've been searching for a good debloated stock touchwiz rom with the latest update, but until I find one I wanted to try something I found called JellyBam. Right now I'm back to 4.1.1 stock-I made a rooky mistake and had to reroot, just fyi.
I downloaded the latest JellyBam from get.jellybam.com and flashed it but all I got was, "status (7) error, Installation Aborted". I found out that "status (7)" happens when the phone checks to make sure the rom is compatible and the way to fix it is delete the line of coding above "show progress" in the "updater-script" file that causes the phone to check for compatibility and rezip the package and flash it. When I flash it now, it doesn't check for it to be compatible, which is good, so it goes straight to install. This time I don't get the "status (7) error" but it still aborts installation and I can't find out what's wrong.
I stopped trying to figure out how to get it to work. I just couldn't figure out what's wrong, I kept getting "status 7" and then "status 6"-and I have no clue what that one is-so I went with a rom my father used and I love it. I went with the inFAMOUS rom.
I would still appreciate some help with that whole "status 6/7" problem if anyone knows. Also, if anyone knows of a good debloated touchwiz rom that has the latest 4.2.2 or 4.2.1 tell me cause I've been searching for one and can't find one I like. I would like one that gets the latest updates.
Thanks.
Recently tried out the Lollipop 5.0 beta and it is not even operable. Everytime I get a text my phone says "unfortunately Whisper Push has stopped" and when I press okay it keeps coming up until I restart my phone.
I want to revert back to a nightly version of KitKat, however all of the versions on the Cyanogenmod download section are gone for whatever reason (404 not found error). Can someone please send me a link to download one of the KitKat nightlies or milestones? Thanks!
LG G2 D801 (T-Mobile)!!!
Hello everyone , im new here but ive been a long time lurker and visitot of XDA
Today i am having a huge problem related to the MOD XTREMEmusic.
For start let me give some BASIC information about my cellphone:
-Samsung Galaxy S3 GT-I9300
-rooted
-ROM:""[EOL] [ROM] [UBUGNG1] [4.3] [Samsung] | [11/08/14] ArchiDroid V1.7.18 by JustArchi""
Now ive been all day trying to make it work on my phone and during today i havê installed over 5 diferent ROMs and NONE of them the mod worked i dont know why? I followed the instructions and even tried to fix it myself but it is hard to gather information about this specific problem .
Everytime and in anyway i try to flash it via recovery it initially "" works"" and loads but when the progress bar is at 3/4 from completion it automatically abort and give me an error about "PERMISSION SETTING" and "status 7"
It gave me the same Error on diferent ROMs too
Can anybody help?
Here is the link for the MOD i am trying to install in case of a need for reference : http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951/
Can anybody help while im a newcomer and im stuck in this section unable to ask in the original oficial thread?
I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entry/-Firmware-Download-Samsung-Galaxy-A3-SM-A300FU-Official-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
XDA Visitor said:
I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/sa...m-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/sa...-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entr...ial-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
Click to expand...
Click to collapse
Greetings and welcome to assist. Which recovery are you using ? Have you tried to update to the latest ? Also if that doesn't work try using odin to go back to latest stock then reflashing custom recovery
Why not make an account and let the experts here
https://forum.xda-developers.com/samsung-a-series
guide you
Good Luck
Sawdoctor