Q&A for [KERNEL][AOSP]Torched Kernel KK-B4.6[07/10/14] F2FS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][AOSP]Torched Kernel KK-B4.6[07/10/14] F2FS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Signature Error when flashing
I'd love to try this kernel, I hear it can fix the Bluetooth issues in CM11 (I'm using M12, but it goes back to M8 and possibly further).
When trying to flash though, I'm getting a signature verification error. This is in TWRP 2.8.1, and of course my Rogers One X is superCID and S-Off.
Does this kernel require the f2fs file system in order to flash?
Thanks!
Hesthrim said:
I'd love to try this kernel, I hear it can fix the Bluetooth issues in CM11 (I'm using M12, but it goes back to M8 and possibly further).
When trying to flash though, I'm getting a signature verification error. This is in TWRP 2.8.1, and of course my Rogers One X is superCID and S-Off.
Does this kernel require the f2fs file system in order to flash?
Thanks!
Click to expand...
Click to collapse
F2fs is not required, I think you may have inadvertently hit the check box in twrp requiring signature check, if so undo that.
jrior001 said:
F2fs is not required, I think you may have inadvertently hit the check box in twrp requiring signature check, if so undo that.
Click to expand...
Click to collapse
Oh ho ho! Right you are, thank you! How unobservant of me.
Whelp, this kernel seems pretty decent; It fixed the issue of wifi hotspots being forgotten, but sadly didn't fix the bluetooth pairing issues in CM11. I'll have to keep looking around for that - I've got a new Sony SW3 I'm itching to get connected properly.
I flashed Torched-LP.Build2.1-F2FS.zip on NostromoPop-v2.0.3 (lollipop 5.1.1).
GPU frequency gets stuck at highest frequency with on demand governor and heats up quite a bit(especially while charging and using phone simultaneously). Any suggestions?
Related
Q&A for [KERNEL][ANYKERNEL] pink kernel 20140728
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ANYKERNEL] pink kernel 20140728. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is it compatible with Moto G LTE (XT1039) ?
How do I enable pocket detect, and what exactly does it do?
Question
Would it be possible to implement "options to disable wake functions with timeout or power button" like in the ElementalX kernel for N5?
Stuck at boot logo when Flashing over Xperience 5.0
Hi,
First: I have flashed this kernel over multiple ROMs (CM11, Xperience 4.4...) and it worked magnificiently, but when I flash it onto any Lollipop ROM (I'm on Xperience's latest build), I get stuck at the boot logo.
I have waited over 20 minutes multiple times, without luck. Could anyone help me?
Really love DT2W, and all the other features!
Second: Whatever ROM I install, the right and left audio channels are inverted.
When I come back to stock, are not switched anymore.
I have searched many forums on this issue, with no success.
Thank you for reading this and/or answering!
[UPDATE] Installed Donkey Kang kernel by pushing through ADB, and It works fine. Would still really like to use PINK kernel.
WLAN / WIFI isn't working
After i installed the kernel i couldn't activate wifi anymore :/ pls help
Q&A for [KERNEL][A510/A700][07/30] Z-Kernel Beta
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][A510/A700][07/30] Z-Kernel Beta. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Updates?
Hey Ziyan,
It's been quite a while since the last update. Any new info on what's going on with the kernel right now?
aneonis said:
Hey Ziyan,
It's been quite a while since the last update. Any new info on what's going on with the kernel right now?
Click to expand...
Click to collapse
Sure, my life gone a bit crazy, my PC died, my phone died, then I got family problems. As you may know, I don't own this device (only get it when it's owner gives it to me for a while), so it's hard to work on it.
I'll try update to update this kernel soon AND create a working lollipop for this device too
Thanks for replying!
Ziyan said:
Sure, my life gone a bit crazy, my PC died, my phone died, then I got family problems. As you may know, I don't own this device (only get it when it's owner gives it to me for a while), so it's hard to work on it.
I'll try update to update this kernel soon AND create a working lollipop for this device too
Click to expand...
Click to collapse
Thanks for the update Ziyan!
Really excited to see what you're going to do with lollipop too!
Swap partition possible?
Hi,
Does the kernel support a swap partition? Since the A700 has only 1 GB RAM I would like to create a guide for that purpose.
Thanks for your great work!
@Ziyan, hello) what about progress of development of new kernel with OC?
Hello. Can I ask, when will release a new kernel build
don't you know first rule on xda-developers: never ask for etas? it's ready when it's ready
greetings
peter
Sent from my A700 using XDA Premium HD app
Q&A for [Kernel] Stock Lollipop Kernel with extras
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel] Stock Lollipop Kernel with extras. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BitOBSessiOn said:
If it's your case... Have yo been able to synchronize the Shield Controller with this kernel in stock ROM... ?
Thnx
Click to expand...
Click to collapse
Yea, it works. I use this kernel with the shield controller and have no problems.
Touchscreen issue
Hi guys,
I am having an issue of the touchscreen. So basically, whenever I lock the device and unlock it, its touchscreen just doesn't response. I can long press the power button to see the power menu but I can do nothing else.
Is this the problem anyone else encountering as well?
Using OTA 2.2, TWRP, otherwise stock.
Thanks
canonfriend said:
Hi guys,
I am having an issue of the touchscreen. So basically, whenever I lock the device and unlock it, its touchscreen just doesn't response. I can long press the power button to see the power menu but I can do nothing else.
Is this the problem anyone else encountering as well?
Using OTA 2.2, TWRP, otherwise stock.
Thanks
Click to expand...
Click to collapse
Can confirm.
Even after flashing many different ROMs and Kernels (stock too), I still got this problem.
Q&A for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][Lollipop 5.0][Obake] PAC-ROM LP Beta-1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
dogie425 said:
trying to install this on a droid ultra xt1080 4.4.4 bootloader unlocked with sunshine, twrp2.8.4.0 can't get it to boot this rom followed all instructions, downloaded multiple times and boot loop is all i get really could use some ideas if any1 could. if i don't do the factory reset it will boot but gives me the warning about the ustable system
Click to expand...
Click to collapse
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
SnipeR_TT said:
The only way I was able to get CM12 roms working was to flash a CM11 rom and gapps, let it boot all the way through and then flash CM12 over it without doing any wipes. I noticed user morr22066 had the same issue and his post helped me fix it.
Click to expand...
Click to collapse
thanks for the heads up. let frustration set in and must have missed that post. I flashed the gummy rom i already had on hand gapps too and then flash the lp pac rom and gapps , I did do a factory reset and wiped the cache and dalvik tho will see how things work out for me
What are the main differences between PAC and CM12?
important question
Hello, I have a Droid Mini, as if I did not install CM12 me all outgoing contacts are set as "Unknown"! Much to ask, show me how to set the CM12 or purely whatever contacts had no problems? Thank you!
Best rom for my XT1080M so far.
It has one problem though. I don't seem to be able to remove built-in apps with root explorer. They all come back after every time I reboot the cell phone. Looking forward to a stable version.
Q&A for (ROM) (VZW PORT) 8/13/2015 Stock Rooted 5.1 GPE LMY47O.H6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (ROM) (VZW PORT) 8/13/2015 Stock Rooted 5.1 GPE LMY47O.H6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
undarated said:
Maybe someone who has successfully flashed the rom will chime in. I can't be the only one!!
Click to expand...
Click to collapse
Thanks for the port. I don't have enough posts to chime in in the dev thread but flashed this last night and no issues. Super CID, EXT4 all partitions, DH firmware I believe.
Hotspot works, Google Camera came with the flash. Ended up installing Xposed, Gravity Box and Sensify to get the ROM setup to my liking.
Looks like this comes with some version of Buck's Elite kernel.
heyfrench said:
Thanks for the port. I don't have enough posts to chime in in the dev thread but flashed this last night and no issues. Super CID, EXT4 all partitions, DH firmware I believe.
Hotspot works, Google Camera came with the flash. Ended up installing Xposed, Gravity Box and Sensify to get the ROM setup to my liking.
Looks like this comes with some version of Buck's Elite kernel.
Click to expand...
Click to collapse
Glad it ended up working for you brother. I'm not a big fan of a million mods in my roms so that's why I took on the port. After owning a few nexus devices I've always tried to make my devices as close to stock android as possible. With that being said, I'm sure some people will enjoy the stock experience that this rom provides.
The kernel is the one that came with the original rom in the GSM M8 section. I didn't change it out since everything worked fine on my device.
Thank you once again for trying out my rom! undarated
How to make screenshot with this rom?