Kitkat Roms A110Q
CM 11
A.O.K.P
Pac-Man
Omni Rom
Carbon Rom
Jelly bean roms
JELLY BEAN ROMS A110Q & A116
ANDROID 4.3 A110Q
CM 10.2
ANDROID 4.2
XPERIA Z2
CAYNOGEN MOD THEMED
ACER ANDROLIUM---A110Q-------- A116
MOD TECHNO VIVO
CAI OS
ATOM ROM
MAGIC OS
HUAWEI EMOTION UI
X'Os
MiVo V2 VIBE UI
MiVo ROM
BEAST STOCK ROM
GUIDES
GUIDES
MediaTek InFinity Porting Guide
A110Q Every Stuff Knowledge
Make Own IMEI Patch
Use Android As Keyboard & Remote
Changing Boot Logo
MTK Permanent Imei Solution
TOOLS,Utility& Recovery
TOOLS,Utility& Recovery
CWM Recovery 6.0.4.4 A110Q
MMX-AIO-UNBRICK Tool(works with all devices)
1GB,880MB,507MB System Partition Tool
My Concept X[FOR DEVS]
My Concept X
Pinned Post Maintainer
PINNED POST MAINTAINER
[WIP]What you need to know before rooting&installing custom roms
NOOB FRIENDLY POST[aSKaNyThINg] ASK ANY QUESTION
[Guide]1-Minute Porting
1-minute Porting Guide(mediatek)
I will explain below the 1-min porting technique.If you understand whole thing then you can port a Rom in 1-mins=60sec....
But You need to setup few things which are quiet easy.
Four Things Needed:-
1)7zip (usually everyone of you have it)
2) Notepad ++( usually everyone of you have it)
3)unpack Scripts- Get From Here and click Here For Thread Link
4)Install latest Pearl From Here.
Now learn Using Unpack Script and setting Up ONE-TIME things:-
1)install Cygwin(linux terminal) (for setting up cygwin see my full guide to port rom here)
2)exrtact the Downloaded script under Home/Your_username/script directory of Cygwin.Here you have to make manually "script" folder then extract.
3)Now open your stock rom and get boot.img and put into unpack scripts folder under cygwin directory.
4)open cygwin and type" cd script " abd hit Enter.Now use this command to extract boot.img:-
Code:
./unpack-MT65xx.pl boot.img
5)Now Copy boot.img-kernel.img and boot.img-ramdisk to a separate folder for future use.And delete boot.img ,boot.img-kernel.img and boot.img-ramdisk to make folder clean for next use.
Start 1-min Porting:-
1)Open the Rom you wanna port with 7zip.(1sec)
2)Now drag and drop boot.img to scripts folder.Use this code to unpack-(6sec)
Code:
./unpack-MT65xx.pl boot.img
3)Now copy and replace boot.img-kernel.img by stock one which you extracted earlier and saved in seperate folder.(10sec)
4)now repack it by this command-(1sec)
Code:
./repack-MT65xx.pl -boot boot.img-kernel.img boot.img-ramdisk new-boot.img
5)Now yoy will get a new-boot.img file under scripts folder.Copy it somewhere else and rename it to only boot.img.Then drag drop boot.img to PORT Rom zip.(18sec)
6)Keep 7Zip opened and drag drop system/etc/firmware and replace from stock rom.(25sec)
7)Drag drop and replace whole System/lib/hw and system/lib/modules from stock rom.(32sec)
8)Now drag drop and replace full system/vendor folder and system/usr/keylayout/gereric.kl file from stock. (1sec)
9)Drag and drop build.prop to anywhere in PC and add below line-(38sec)
Code:
ro.sf.lcd_density=xxx
10)Put value of your screen dpi in place of xxx..(40sec)
11)Drag and put back build.prop in Port Rom zip.Flash it and check it.(45sec)
For Futher details of Porting and Rom development Go HERE
Help Plzz
digyvijaykumar123 said:
Kitkat Roms A110Q
CM 11
A.O.K.P
Pac-Man
Omni Rom
Click to expand...
Click to collapse
When Are you Gonna Ad the MTK Stuff im Waiting Plz Can you Update It quickly i will give you a thumbs up
Pls help
digyvijaykumar123 said:
1-minute Porting Guide(mediatek)
Code:
./repack-MT65xx.pl -boot boot.img-kernel.img boot.img-ramdisk new-boot.img
Click to expand...
Click to collapse
Hi, when i use this code cygwin say recompiling, everything is ok, but i can´t find "new-boot.img" file. I do a search, no exist.
Thanks a lot, great job.
digyvijaykumar123 said:
1-minute Porting Guide(mediatek)
I will explain below the 1-min porting technique.If you understand whole thing then you can port a Rom in 1-mins=60sec....
But You need to setup few things which are quiet easy.
Four Things Needed:-
1)7zip (usually everyone of you have it)
2) Notepad ++( usually everyone of you have it)
3)unpack Scripts- Get From Here and click Here For Thread Link
4)Install latest Pearl From Here.
Now learn Using Unpack Script and setting Up ONE-TIME things:-
1)install Cygwin(linux terminal) (for setting up cygwin see my full guide to port rom here)
2)exrtact the Downloaded script under Home/Your_username/script directory of Cygwin.Here you have to make manually "script" folder then extract.
3)Now open your stock rom and get boot.img and put into unpack scripts folder under cygwin directory.
4)open cygwin and type" cd script " abd hit Enter.Now use this command to extract boot.img:-
Code:
./unpack-MT65xx.pl boot.img
5)Now Copy boot.img-kernel.img and boot.img-ramdisk to a separate folder for future use.And delete boot.img ,boot.img-kernel.img and boot.img-ramdisk to make folder clean for next use.
Start 1-min Porting:-
1)Open the Rom you wanna port with 7zip.(1sec)
2)Now drag and drop boot.img to scripts folder.Use this code to unpack-(6sec)
Code:
./unpack-MT65xx.pl boot.img
3)Now copy and replace boot.img-kernel.img by stock one which you extracted earlier and saved in seperate folder.(10sec)
4)now repack it by this command-(1sec)
Code:
./repack-MT65xx.pl -boot boot.img-kernel.img boot.img-ramdisk new-boot.img
5)Now yoy will get a new-boot.img file under scripts folder.Copy it somewhere else and rename it to only boot.img.Then drag drop boot.img to PORT Rom zip.(18sec)
6)Keep 7Zip opened and drag drop system/etc/firmware and replace from stock rom.(25sec)
7)Drag drop and replace whole System/lib/hw and system/lib/modules from stock rom.(32sec)
8)Now drag drop and replace full system/vendor folder and system/usr/keylayout/gereric.kl file from stock. (1sec)
9)Drag and drop build.prop to anywhere in PC and add below line-(38sec)
Code:
ro.sf.lcd_density=xxx
10)Put value of your screen dpi in place of xxx..(40sec)
11)Drag and put back build.prop in Port Rom zip.Flash it and check it.(45sec)
For Futher details of Porting and Rom development Go HERE
Click to expand...
Click to collapse
Ow nice guy, but this is for rom or for app or for rom and apps?
Hi guys...
Once again i am back with an Extreme guide...
Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder (whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done! :3
Now go to your unpacked stock recovery and copy (#Karnel) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) / ramdisk and replaced all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replaced....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!now you will see your new recovery named (new.img)...Now open recovery tools and flash your new recovery...And see magic or you can make a cwm flashable recovery.zip ...Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.then renamed your new recovery file to recocery.img.Now copy it and paste in these folder where you extracted that zip and replaced it.Done! now create a zip and go to recovery mood and flash it...
_________________________________
N.B. -> This method will not work in TWRP porting beacuse porting TWRP is different... Sometimes your new recovery may not work...if its not work then try again and be patient...
_________________________________
I hope this post was helpfull if think so and successed to port your new recovery then dont forget to give me some credits dude...
_________________________________
if you like this post then click on thanks botton...may its increased my impession on giving new guides...
_________________________________
Full post written by Me...and some credits goes to Arnav bro (My boss) and my best friend S.H
_________________________________
My apktool say like this
cpio: can't create symlink from sbin/ueventd
And i can't found files that mentioned above in ramdisk folder on boot.img extract folder
Sorry for my bad english
Md.Shafikul.islam said:
Hi guys...
Once again i am back with an Extreme guide...
Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder (whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done! :3
Now go to your unpacked stock recovery and copy (#Karnel) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) / ramdisk and replaced all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replaced....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!now you will see your new recovery named (new.img)...Now open recovery tools and flash your new recovery...And see magic or you can make a cwm flashable recovery.zip ...Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.then renamed your new recovery file to recocery.img.Now copy it and paste in these folder where you extracted that zip and replaced it.Done! now create a zip and go to recovery mood and flash it...
_________________________________
N.B. -> This method will not work in TWRP porting beacuse porting TWRP is different... Sometimes your new recovery may not work...if its not work then try again and be patient...
_________________________________
I hope this post was helpfull if think so and successed to port your new recovery then dont forget to give me some credits dude...
_________________________________
if you like this post then click on thanks botton...may its increased my impession on giving new guides...
_________________________________
Full post written by Me...and some credits goes to Arnav bro (My boss) and my best friend S.H
_________________________________
Click to expand...
Click to collapse
pleae help me porting recovery for snapdragon devices .. i cant find a single guide for it please help me bro iplease ..guide me please
no meta files
Md.Shafikul.islam said:
Hi guys...
Once again i am back with an Extreme guide...
Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder (whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done! :3
Now go to your unpacked stock recovery and copy (#Karnel) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) / ramdisk and replaced all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replaced....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!now you will see your new recovery named (new.img)...Now open recovery tools and flash your new recovery...And see magic or you can make a cwm flashable recovery.zip ...Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.then renamed your new recovery file to recocery.img.Now copy it and paste in these folder where you extracted that zip and replaced it.Done! now create a zip and go to recovery mood and flash it...
_________________________________
N.B. -> This method will not work in TWRP porting beacuse porting TWRP is different... Sometimes your new recovery may not work...if its not work then try again and be patient...
_________________________________
I hope this post was helpfull if think so and successed to port your new recovery then dont forget to give me some credits dude...
_________________________________
if you like this post then click on thanks botton...may its increased my impession on giving new guides...
_________________________________
Full post written by Me...and some credits goes to Arnav bro (My boss) and my best friend S.H
_________________________________
Click to expand...
Click to collapse
No meta files in my boot image
Difficulty Level – Medium
Requirements –
.
1. Developing Skill
2. img unpack-repack tool ( kitchen or other tool)
3. Notepad++
4. Brain
.
So Let’s start.......
.
Step 1 : Unpack both ( stock and port) recovey.img
How to Unpack-Repack without kitchen? Follow this
tool/guide -->
Michfood Tools
.
Step 2 : Now open the default.prop file with
NotePAD++ from the Extracted “rmdisk” FOLDER.
Open those build.prop file do all Changes the all
changeable things what you can just like that we do
when PORTING ROM.
Then COPY the ueventd, meta & factory files those
are in (.vc) FILES from the STOCK “rmdisk” FOLDER
to PORT…
Step 3 : FROM rmdisk>etc FOLDER open
recovery.fstab FILE with NP++ .... REPLACE the from
your Stock block with PORT mmcblk ……If you want
replace with StockRecovery
rmdisk>res>recovery.fstab or with workable
RECOVERY. JUST replace the emmc block . If you dont
know your phone’s emmc block then dont do this. It
maybe harmful.
Step 4 : Now replace kernel
Step 5 : Now all the works for PORTING is now
Finished..... Repack the port recovery .img . Flash it.
Enjoy.
.
If you don't find any file unpack boot.img get them from there...
.
This method worked with my MTK6572 Device! I have ported COT, CTR, PhilZ, CWM by this method
.
Thanks to
1.Arnav
2.Michfood
3.Akib
>> THIS IS VERY SIMPLE WAY TO PORT THE PHILZ RECOVERY FOR YOUR DEVICE<<
So please follow the given steps to port recovery
First Decompile
1.stock RECOVERY
2..Custom recovery (download the any philz recovery with same resolution of your device.)
now,
STEP 1 . open the folder of stock recovery folder and open a folder rmdsk in it.
Copy these files:
> meta_init.project.rc
>meta_init.rc
>ueventd.rc
> meta_init.modem.rc
>ueventd.goldfish.rc
> fstab
STEP 2. Open etc folder and copy recovery.fstab file too.
STEP 3. Now replace these files in the Custom recovery with the same directories.
STEP 4. Now go back and copy these files from the main folder in which you have your stock recovery’s extracted rmdsk and kernel files:
> kernel
>kernel_header
>Replace these files in the Custom Recovery too.
>Now go back to the main folder where you extracted the tool and .IMGs files.
>You’re done! Now try flashing! :good:
Credits:
@shubham shahu
@Harshnil walde
In this guide I'm going to tell you about unpacking/repacking your boot(kernel),recovery.
I won't be responsible if u kill your phone and your mom beat the hell outta u.
Please do some research before trying this stuffs.
Method 1----
Put your boot or recovery.img in root/cache/here folder.
Get apktool mobile.
Open it and navigate to root folder.
Press hold on cache folder
Click on 'Get access permission(root)'
Now click on your img file
Select and click unpack all(mt6***) and bang...
U will see unpacked everything there.
And to repack click ramdisk folder and hit repack mt**** ...
Method 2---
Get unpack repack boot.img apk from google play
Put your boot.img in your SD card(default write disk)
Create a folder and name it unpack in SD CARD.
open that app and search for boot.img in SD CARD
Select it
Choose where to unpack(choose unpack folder)
Hit start and done
To repack,find out kernel base,page size in unpack folder.
Write them down in repack option
Select the zlimage(kernel) and select ramdisk
select the 'unpack' folder(where new img will b created)
click start and done
Method 3---(Advance Stuff)
Get Android Image Kitchen from play store
Open and click on ( ) sign
Select unpack and select boot.img or recovery.img
(U must should put the img in root of your default sd card and don't rename it)
U will see two folder like
ramdisk
and
kernel stuff
press hold on them and export them to modify
U can repack in same way by clicking repack option.
Method 4---
There is already a guide on xda about un/repack using terminal emulator.
U can check that out if u want to.
Facing problems?
comment below..
bump