[Q] GT-N8000 Bricked And can not flash Any Stock Rom - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hello Brothers...
I Have GT-N8000 Soft Bricked ( I think ) And it stuck at samsung logo foever...
In download mode it show me the following :
ODIN MODE
PRODUCT NAME : GT-N8000
CURRENT BINARY: Samsung Official
SYSTEM STATUS : Official
RP SWREV: A2
i tried to flash a lot of stock firmware from Sammobile.com but seem hopeless..
this is what Odin show me after tried to flash each files ( the result is exactly the same )
Code:
<ID:0/024> Added!!
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> SingleDownload.
<ID:0/024> boot.img
<ID:0/024> NAND Write Start!!
<ID:0/024> FAIL!
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here are the name of firmware that i already flash it, just in case that i miss and latest bootloader and any working firmware :
N8000ZCCMH1_N8000CHNCMH1_N8000ZCCMH1_HOME.tar
N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar
N8000XXUDNH2_N8000OJVDNH1_N8000XXUDNH1_HOME.tar
N8000XXUDNH2_N8000OXXDNJ1_N8000XXUDNH1_HOME.tar
Please help me ASAP because i really need it working... i have a lot of work to do with it
Any help will be much appreciated...
Best Regards...

cdobia majority
No option to help me out sir?... Please help me...

I wish I could help but I have the same issue. I fear once you try (and fail..) to flash to 4.4 upwards you have problems. I have tried a mix of stock roms from 4.0-4.4 and always get the same results as you.
Some forums suggest using a different USB cable, different version of ODIN and also a different USB port.
I have tried all these things with no luck, but maybe it will help you out. I know have a samsung branded paperweight until someone (much smarter than me!) works out how to fix this problem with the Note.

force reboot to odin mode
flash a known working recovery [custom] for your device making sure automatic reboot is checked.
after tab reboots force reboot to recovery mode with button combo.
in recovery mode adb push known working custom rom.zip.
reboot to recovery from recovery.
flash custom rom.
as long as you haven't done anything damaging like flashing bad/wrong bootloader/firmware
you will be able to get odin to reboot.
if odin is telling your that you pit file is missing/damaged then you're done.
haven't heard of anyone successfully flashing/repartitioning with pit file in a long time.
or those who do are the kind who say "okay i fixed it" and never provide the details.
lastly and no offense, don't keep flashing like a spaz, you will just make the situation worse.
so long as you have an intact/functioning kernel in boot or recovery you can revive your device.
m

Hello..
i'm already Tried Flashing both Stock and custom Recovery.. but they are FAILED in Odin app while it flashing...
Do u have any working stock or custom recovery Links?...
UPD : is that RP SWREV: A2 Meanings is the bootloader have been locked sir?...
and if it locked... how can i unlock it ( with looping Tab and cant get in to recovery )
Much Appreciated
Rattanak

forget stock.
as for odin try version 3.07 http://d-h.st/4VU
been using this version for years. devices flashed gt-p5210 gt-n8013 sm-t210r gt-p3113 sm-t530nu
for recovery search forums and read OP's completely as well as threads.
as a thought goto the gnabo rom thread and follow complete instructions.
again read the OP completely as well as the thread

Maybe this post over on the S4 page could help us:
http://forum.xda-developers.com/showthread.php?t=2744061
I will be giving this a try tomorrow.
I tried odin 3.07 and have tried most of the roms here. The issue is with the failed kitkat updates as the bootloader is locked - from that point forward going anywhere seems to be the issue. This downgrade might bring the device back to life - watch this space I guess.

Progress
well it was because of the EMMC It self..
i try to JTAG it with z3x JTAG and it not responding... im working on it and will back for more detail...
Regards

If this happened after a failed KitKat update then only KitKat Roms will work for you, officially it can't be dowgraded, I just need to know if your device is branded or unlocked, as far as I can tell, you flashed a Rom that is not meant specifically for your device, it flashed the boot.img then failed to flash system.img, later on when you tried to fix it,you get failure at the boot.img stage as you can't downgrade it anymore through Odin, if your device is unlocked you should be able to flash any KitKat stock rom from Sammobile for any region not necessarily your region.
Sent from my SM-G800H using XDA Free mobile app

Ahmedivx said:
If this happened after a failed KitKat update then only KitKat Roms will work for you, officially it can't be dowgraded, I just need to know if your device is branded or unlocked, as far as I can tell, you flashed a Rom that is not meant specifically for your device, it flashed the boot.img then failed to flash system.img, later on when you tried to fix it,you get failure at the boot.img stage as you can't downgrade it anymore through Odin, if your device is unlocked you should be able to flash any KitKat stock rom from Sammobile for any region not necessarily your region.
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
so you are going to tell me that this N8000 is Locked?...
Regards

Rattanak said:
so you are going to tell me that this N8000 is Locked?...
Regards
Click to expand...
Click to collapse
No I'm not saying that it's locked, I'm asking you whether it's locked or not, do you have to use a certain network/carrier at your country ? If you can use sim cards from different carriers / service providers then your device is not locked
Sent from my SM-G800H using XDA Free mobile app

Ahmedivx said:
No I'm not saying that it's locked, I'm asking you whether it's locked or not, do you have to use a certain network/carrier at your country ? If you can use sim cards from different carriers / service providers then your device is not locked
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
Well i dont think that it was locked because i can use any carrier in my country here. Plus.. i think it was international version that you can put any SIM Card in it...
Regards...

Rattanak said:
Well i dont think that it was locked because i can use any carrier in my country here. Plus.. i think it was international version that you can put any SIM Card in it...
Regards...
Click to expand...
Click to collapse
OK great then you have no problem using any of sammobile firmwares for the GT-N8000 international version.

So totally non committal, but I managed to fix my Note 10.1 today I hope it works for you.
I had been trying to upgrade to android 4.4.2 using a custom rooted rom but got stuck in a boot loop with my only option as download mode (no CWM, no reset, nothing just bootloop download only).
As a last resort I downloaded a Note 10.1Android 4.0.4 pit file and flashed it from odin 3.07 (pit file selected, Auto Reboot ticked, Re-partition ticked, F.Reset Time ticked - everything else unticked). Flashed the pit file, let the tablet reset and then it picked up the android update as though all was fine. The device is now working fine and without issue.
The .pit file i used is attached. Cant promise it will work, but I hope you have the same luck I do.

Rattanak said:
Hello Brothers...
I Have GT-N8000 Soft Bricked ( I think ) And it stuck at samsung logo foever...
In download mode it show me the following :
ODIN MODE
PRODUCT NAME : GT-N8000
CURRENT BINARY: Samsung Official
SYSTEM STATUS : Official
RP SWREV: A2
i tried to flash a lot of stock firmware from Sammobile.com but seem hopeless..
this is what Odin show me after tried to flash each files ( the result is exactly the same )
Code:
<ID:0/024> Added!!
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> SingleDownload.
<ID:0/024> boot.img
<ID:0/024> NAND Write Start!!
<ID:0/024> FAIL!
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here are the name of firmware that i already flash it, just in case that i miss and latest bootloader and any working firmware :
N8000ZCCMH1_N8000CHNCMH1_N8000ZCCMH1_HOME.tar
N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar
N8000XXUDNH2_N8000OJVDNH1_N8000XXUDNH1_HOME.tar
N8000XXUDNH2_N8000OXXDNJ1_N8000XXUDNH1_HOME.tar
Please help me ASAP because i really need it working... i have a lot of work to do with it
Any help will be much appreciated...
Best Regards...
Click to expand...
Click to collapse
Hi Ratanak,
I think you're Cambodian and me too. I got the problem like you. Since I flashed the cm12 for about 1 week, it sudddently auto reboot and stuck in " Samsung Galaxy note 10.1 GT-N8000" logo. I've tried many ways.. Different version of odin, Sammobile web.. nothing work.. How about you?? Have you fix it yet? I hope to hear from you back.
regard,
Tony
---------- Post added at 12:56 AM ---------- Previous post was at 12:49 AM ----------
geekyhawkes said:
So totally non committal, but I managed to fix my Note 10.1 today I hope it works for you.
I had been trying to upgrade to android 4.4.2 using a custom rooted rom but got stuck in a boot loop with my only option as download mode (no CWM, no reset, nothing just bootloop download only).
As a last resort I downloaded a Note 10.1Android 4.0.4 pit file and flashed it from odin 3.07 (pit file selected, Auto Reboot ticked, Re-partition ticked, F.Reset Time ticked - everything else unticked). Flashed the pit file, let the tablet reset and then it picked up the android update as though all was fine. The device is now working fine and without issue.
The .pit file i used is attached. Cant promise it will work, but I hope you have the same luck I do.
Click to expand...
Click to collapse
Thanks for your shares..
it doesn't work for me..

tonykhatthy said:
Hi Ratanak,
I think you're Cambodian and me too. I got the problem like you. Since I flashed the cm12 for about 1 week, it sudddently auto reboot and stuck in " Samsung Galaxy note 10.1 GT-N8000" logo. I've tried many ways.. Different version of odin, Sammobile web.. nothing work.. How about you?? Have you fix it yet? I hope to hear from you back.
regard,
Tony
---------- Post added at 12:56 AM ---------- Previous post was at 12:49 AM ----------
Thanks for your shares..
it doesn't work for me..
Click to expand...
Click to collapse
Hello, I am in the same situation with my Note n8000 from China, It only can access to download mode. I have tried everything, using all version odin, Heimdall and adb, and the results are: nand write error, failed to unpack recived packet and device offline. Still on samsung logo all the time, even charging it. I unplugged the battery cable even for more than two hours and nothing. I tried many roms, from sammobile, cwd... I don't know what else I can do... please help.

Judged by your post and NAND write failure means you have damaged the NAND memory and require probably a new motherboard .
But search for Nand failure fixes first .

Hello sorry for super late reply... i left XDA for like half a year ...
i finally sort that problem out on changing its EMMC works for me...
Regards...

Rattanak said:
Hello sorry for super late reply... i left XDA for like half a year ...
i finally sort that problem out on changing its EMMC works for me...
Regards...
Click to expand...
Click to collapse
how much did the change of EMMC chip costed you?

I also have same problem

Related

[q] SGS4 i9505 signal error !!

I own a SGS4 GT-i9505 which I bought from UAE. I updated the os to 4.3 via OTA . It worked well for about 4 months then it started to show up some signal errors. Actually there is no signal at all. When i searched for updates it showed latest firmwares are alredy installed. Now I got rooted my phone and it didn't solved my issue. Now when I try to update my phone via OTA it shows your device is modified. But when I connect with kies 3 there is an official update available.
Now my question is 1. Can I update that available official update through kies to my rooted phone ?
2. How can I get rid of this no network error ?
3. Is it possible to downgrade my sgs4 from 4.3 to stock 4.2.2 ? If so is there is any problem with knox app in 4.3 ?
Please help now its giving pain..
screen shots are attached.
Thanx.
Yes you can!
HI Friend!
This will guide you to update your phone to the latest official firmware, May be it solves all the problems!
Things you need:
* Samsung Kies
*USB Cable
*device to update/downgrade to official firmware available
How to:
*Open kies
*Go to tools-->Firmware Upgrade and Installation
*Enter your device Model Number i.e. "GT-i9505"
*Now it will ask you Serial number
Go to Settings-->about device-->Status and find serial number and enter it
*Now connect your device and leave till it Updates.. it will automatically reboot and complete Update!
Now your phone will be Upto-date
Don't forget the Thanks button!
SadEff said:
HI Friend!
This will guide you to update your phone to the latest official firmware, May be it solves all the problems!
Things you need:
* Samsung Kies
*USB Cable
*device to update/downgrade to official firmware available
How to:
*Open kies
*Go to tools-->Firmware Upgrade and Installation
*Enter your device Model Number i.e. "GT-i9505"
*Now it will ask you Serial number
Go to Settings-->about device-->Status and find serial number and enter it
*Now connect your device and leave till it Updates.. it will automatically reboot and complete Update!
Now your phone will be Upto-date
Don't forget the Thanks button!
Click to expand...
Click to collapse
Thanks for the reply but here in my case please note that my phone is rooted one and kies itself gives a warning that installing firmwares to rooted devices may encounter any failure !!!
alison20064all said:
Thanks for the reply but here in my case please note that my phone is rooted one and kies itself gives a warning that installing firmwares to rooted devices may encounter any failure !!!
Click to expand...
Click to collapse
No problem just accept and continue...
Don't forget to backup every thing i.e, Contacts and internal sd card for safety I am not sure about it will format it all..
SadEff said:
HI Friend!
This will guide you to update your phone to the latest official firmware, May be it solves all the problems!
Things you need:
* Samsung Kies
*USB Cable
*device to update/downgrade to official firmware available
How to:
*Open kies
*Go to tools-->Firmware Upgrade and Installation
*Enter your device Model Number i.e. "GT-i9505"
*Now it will ask you Serial number
Go to Settings-->about device-->Status and find serial number and enter it
*Now connect your device and leave till it Updates.. it will automatically reboot and complete Update!
Now your phone will be Upto-date
Don't forget the Thanks button!
Click to expand...
Click to collapse
Some thing useful! :fingers-crossed:
No service state !!
SadEff said:
No problem just accept and continue...
Don't forget to backup every thing i.e, Contacts and internal sd card for safety I am not sure about it will format it all..
Click to expand...
Click to collapse
Hey friend,
Thanks for the reply. I have updated my GT-i9505 to android kitkat 4.4.2 but the problem still exist. i have done a hard reset and wiped out the cache after upgrading the firmware. then also the problem still exist. there is no signal at all. Please help me.
thanks in advance
Few questions mate. But first thing to do is get rid of the Imei number you put up in a ss. GET RID OF THAT NOW FOR YOURE SAKE!!!
next question is is it second hand? Possible Imei block if it's second hand.
Next question is have you flashed stock firmware with Odin? What happened? Have you tried to change you're modem?
Sent from my GT-I9300 using xda premium
andrewwright said:
Few questions mate. But first thing to do is get rid of the Imei number you put up in a ss. GET RID OF THAT NOW FOR YOURE SAKE!!!
next question is is it second hand? Possible Imei block if it's second hand.
Next question is have you flashed stock firmware with Odin? What happened? Have you tried to change you're modem?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
1. No i bought it from UAE. And there is no problem with the imie, when i check imie with *#06# it is same as the number in box.
2. Yeah i got rooted my device and it didn't solved my issue. Then i upgraded to 4.4.2 via kies, it removed my root and the status gone back to official.But it is sad that the signal error is same as before.
At this time my firmware details were as follows
Product Code: XST
PDA: I9505XXUFNBA
CSC: I9505OJVFNB2
MODEM: I9505XXUFNBA
Then finally i flashed the modem with odin. The current baseband version is I9505XXUBMF7 . The problem still exist.
please reply..
thanks in advance mate.
Do you get data still? What is uae? ALSO REMOVE YOURE SS OF YOURE IMEI NUMBER. check online with a google search for Imei block checkers. Input you're Imei number into that and see if it's blocked already. :thumbup:
Sent from my GT-I9300 using xda premium
Bricked s4 !! Help please !!
andrewwright said:
Do you get data still? What is uae? ALSO REMOVE YOURE SS OF YOURE IMEI NUMBER. check online with a google search for Imei block checkers. Input you're Imei number into that and see if it's blocked already. :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Mate everything gone out of my hand !! I read that flashing the modem individually may resolve the problem from http://forum.xda-developers.com/showthread.php?t=2192025 and i tried it too., I flashed I9505_XXUBMF7_MODEM.tar with Odin3_v3.09 and it got installed in my device which had 4.4.2 kitkat and replaced the MODEM: I9505XXUFNBA without any mess. But the problem remained unsolved . So i tried to flash another modem I9505XXUAMDM_MODEM.tar but something went wrong and the odin download mode didn't finished properly and my phone got bricked :crying:
I tried to recover my device with stock firmware downloaded from http://www.sammobile.com/firmwares/3/?download=26474 but odin fails to flash it. mEssages shown in Odin is given below,
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNBA_I9505OJVFNB2_I9505XXUFNBA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Then i downloaded the pit File and tired to flash with it see below
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ODDIN MODE STATUS IN MY DEVICE IS
ODIN MODE
PRODUCT NAME : GT-I9505
CURRENT BINARY :CUSTOM
SYSTEM STATUS : OFFICIAL
KNOX KERNAL LOCK : 0x0
KNOX WARRENTY VOID : 0x1
USB-COFIG.LSB : 0x30
WRITE PROTECTION : ENABLE
eMMC BURST MODE : ENABLE
I think the failure is due to the write protection enabled in the divice. I s there is any way to unbrick my device ?
.
I have a feeling I have now totally screwed everything up and there is no-way back . Please help ...
BTW UAE stands for United Arab Emirates
UNSOLVED !!!
Someone please help me....!!
Wow you flashed a pit file on a failed Odin flash!! Pit file is a very very last resort thing to do. Had you tried everything and if so what did you try? Odin can be funny with phones at times so don't put of and go flashing pit files. Can you remove the pit you flashed. Does it go into download mode now??
Sent from my GT-I9300 using xda premium
andrewwright said:
Wow you flashed a pit file on a failed Odin flash!! Pit file is a very very last resort thing to do. Had you tried everything and if so what did you try? Odin can be funny with phones at times so don't put of and go flashing pit files. Can you remove the pit you flashed. Does it go into download mode now??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes, i can get into the download mode.
I tried almost everything i can.I mean as i mentioned in the previous reply. I tried to recover the firmware via Kies recovery, but after downloading almost the recovery file kies says " device not recoganised...... bla blaa "
BTW, falshing pit file always failed in my device !!
eMMC BURST MODE :Enabled
How can i get this bug disabled ?
actually what is this eMMC MODE ?
LOSING HOPE !!! anyone have any idea ??:crying::crying::crying::crying:
Firmware from sammobile.com
And flash it with Odin!!!. Forget kies!!!
Stuck on boot after flash?? Factory reset.
Flash in Odin fail??? Service center fix.
Sent from my GT-I9300 using xda premium
andrewwright said:
firmware from sammobile.com
and flash it with odin!!!. Forget kies!!!
Stuck on boot after flash?? Factory reset.
Flash in odin fail??? Service center fix.
Sent from my gt-i9300 using xda premium
Click to expand...
Click to collapse
samsung totally sucks !! No quality at all> totally hate it..
at first go to download mode then flash with firmware and make sure your phone charged upto 70%.
Sent from my GT-S5282 using xda app-developers app
SOLVED
When i approached the samsung authorized service center they told me to change the mother board and that will only solve my problem. Since the GT-I9505 varient is not available in my country its hopeless. So i gave it to a local store. They just changed the antenna and the network IC. Finally my phone got life back.

Mistakenly Flash with Verizon Firmware 6.0.1 and cannot activate phone

Hello,
I just bought my Note Edge 5 days ago. Yesterday I mistakenly flash it with N915VVRU2CPD1 and pit file because I saw in the about section it stated Android 5.0.1 N915V**** and now I cannot use my phone since the phone asking for Verizon simcard to activate the phone. When I opened the battery i saw the actual model is N915F!.
Is it possible to reflash back to 6.0.1 N915F? I dont know the phone origin, but I assume it is from my country(Malaysia) since I bought it here.
Really need help, Thank you in advance.
What can you loose?
It's not working anyway, right?
bert269 said:
What can you loose?
It's not working anyway, right?
Click to expand...
Click to collapse
I was thinking maybe I just send to samsung and tell me I get 'This' phone but cannot use
axrhuls said:
Hello,
I just bought my Note Edge 5 days ago. Yesterday I mistakenly flash it with N915VVRU2CPD1 and pit file because I saw in the about section it stated Android 5.0.1 N915V**** and now I cannot use my phone since the phone asking for Verizon simcard to activate the phone. When I opened the battery i saw the actual model is N915F!.
Is it possible to reflash back to 6.0.1 N915F? I dont know the phone origin, but I assume it is from my country(Malaysia) since I bought it here.
Really need help, Thank you in advance.
Click to expand...
Click to collapse
Russia and Kazakhstan. SM-N915F , hmmm how you end up with that model in msia ?
Aimara said:
Russia and Kazakhstan. SM-N915F , hmmm how you end up with that model in msia ?
Click to expand...
Click to collapse
omg really? herm... I bought them online. From Malaysia seller.
Aimara said:
Russia and Kazakhstan. SM-N915F , hmmm how you end up with that model in msia ?
Click to expand...
Click to collapse
SM-N915F also got Malaysia version...
UPDATE: I still need help..
Getting this error when using official firmware
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Bump Bump
Still need help.. Thank you :/
Download Mode:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N915F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: ON
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Click to expand...
Click to collapse
no one know how to fix this?
Might work
axrhuls said:
no one know how to fix this?
Click to expand...
Click to collapse
Go into download mode flash twrp
boot into recovery wipe everything other than ur internal storage and micro sd
Download fw from Sam mobile website look for ur phone models fw
Flash using Odin
Thank you for the option sir, I will try to flash twrp first. I will tell the result later.
w8 brick recovery said:
Go into download mode flash twrp
boot into recovery wipe everything other than ur internal storage and micro sd
Download fw from Sam mobile website look for ur phone models fw
Flash using Odin
Click to expand...
Click to collapse
The fastboot stuck in waiting for device [emoji17] [emoji17]
twrp cf autoroot using odin triggered Custom Binary(recovery) blocked by R/L in phone and flashing failed.

sm-j330f NFC?

Hello,
Today found there is no NFC option on my phone. Tried in Settings and top bar. Cannot find it. All sites state it has...
My model is sm-j330f, XEO soft from December so the newest one (updated at 10.12.12018).
Any solution, idea?
aavil said:
Hello,
Today found there is no NFC option on my phone. Tried in Settings and top bar. Cannot find it. All sites state it has...
My model is sm-j330f, XEO soft from December so the newest one (updated at 10.12.12018).
Any solution, idea?
Click to expand...
Click to collapse
Settings>connections>NFC and payment.
ashyx said:
Settings>connections>NFC and payment.
Click to expand...
Click to collapse
Nope, got nothing. Is it possible Orange block it somehow? Dunno actually how coz I flashed national version (vendor free)
aavil said:
Nope, got nothing. Is it possible Orange block it somehow? Dunno actually how coz I flashed national version (vendor free)
Click to expand...
Click to collapse
Odd, maybe flash the kernel and system image from FN firmware?
ashyx said:
Odd, maybe flash the kernel and system image from FN firmware?
Click to expand...
Click to collapse
Dunno exactly what to flash. I've already changed the vendor soft for national with 4 files software. And to be honest its a company phone so dont need it to pay etc. Just discovered it by trying to transfer files to laptop. Thanks for help anyway
aavil said:
Dunno exactly what to flash. I've already changed the vendor soft for national with 4 files software. And to be honest its a company phone so dont need it to pay etc. Just discovered it by trying to transfer files to laptop. Thanks for help anyway
Click to expand...
Click to collapse
Well I have the FN model. However I have flashed the J330f kernel and baseband to the device(I'm a developer for this device) and still have NFC.
Typically options like NFC are enabled in the CSC portion of the firmware. To activate NFC you likely need to flash CSC from FN firmware or modify the CSC firmware config.
ashyx said:
Well I have the FN model. However I have flashed the J330f kernel and baseband to the device(I'm a developer for this device) and still have NFC.
Typically options like NFC are enabled in the CSC portion of the firmware. To activate NFC you likely need to flash CSC from FN firmware or modify the CSC firmware config.
Click to expand...
Click to collapse
Ok, thank you. I am dowloading J3 FN version and will flash CSC. Will update tommorow
update: just downloaded the newest firmware but its an one file, do you have CSC extracted by any chance?
aavil said:
Ok, thank you. I am dowloading J3 FN version and will flash CSC. Will update tommorow
update: just downloaded the newest firmware but its an one file, do you have CSC extracted by any chance?
Click to expand...
Click to collapse
You can extract it yourself using 7zip.
Unpack the Md5. One of files inside will be cache.img
This is the CSC. Repack it to tar with 7zip( no compression, store only) and flash in ODIN.
ashyx said:
You can extract it yourself using 7zip.
Unpack the Md5. One of files inside will be cache.img
This is the CSC. Repack it to tar with 7zip( no compression, store only) and flash in ODIN.
Click to expand...
Click to collapse
I will give some tries, but not at the moment. Don't really need it
Second attempt. Maybe I should try to reflash everything with newest F firmware, but FN CSC?
edit#3: Download section says "Only official released binaries are allowed to be flashed (cashe)".
edit, i downloaded 320FN not 330FN, might be it. Ill update
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
aavil said:
I will give some tries, but not at the moment. Don't really need it
Second attempt. Maybe I should try to reflash everything with newest F firmware, but FN CSC?
edit#3: Download section says "Only official released binaries are allowed to be flashed (cashe)".
edit, i downloaded 320FN not 330FN, might be it. Ill update
Click to expand...
Click to collapse
XmitData_write usually means a communication error. Bad cable, cable too long, bad port etc.
Also Ensure OEM_UNLOCK is enabled in developer settings before flashing anything.
ashyx said:
XmitData_write usually means a communication error. Bad cable, cable too long, bad port etc.
Also Ensure OEM_UNLOCK is enabled in developer settings before flashing anything.
Click to expand...
Click to collapse
I flashed everything one more time with CSC from FN, but still no NFC. Is it possible that Orange has "little different" hardware or hardware-level blocked? I've seen once Galaxy S6 I think without data sharing (it was some UK vendor firmware).
You've got screenshots in attachments, in fact in Polish but you should be able to check it.
aavil said:
I flashed everything one more time with CSC from FN, but still no NFC. Is it possible that Orange has "little different" hardware or hardware-level blocked? I've seen once Galaxy S6 I think without data sharing (it was some UK vendor firmware).
You've got screenshots in attachments, in fact in Polish but you should be able to check it.
Click to expand...
Click to collapse
Using a terminal app or adb shell type the following :
getprop
Look for:
[sys.nfc.support]: [1]
ashyx said:
Using a terminal app or adb shell type the following :
getprop
Look for:
[sys.nfc.support]: [1]
Click to expand...
Click to collapse
Nope, no support for me. That's strange, all sites state it does support for NFC. Sadly but my phone is not listed with spec on Orange.pl anymore so I can't compare. Maybe one day I will call them for explanation coz Im curious.
Thanks mate for your help
aavil said:
Nope, no support for me. That's strange, all sites state it does support for NFC. Sadly but my phone is not listed with spec on Orange.pl anymore so I can't compare. Maybe one day I will call them for explanation coz Im curious.
Thanks mate for your help
Click to expand...
Click to collapse
Try adding the following to the build.prop:
ro.vendor.nfc_support=1

Convert AT&T S7 to a Verizon S7

I've been on forums enough to know that this will be an annoying question, but I'm having a hard time figuring this out. I just got my friends SM-G930A, an AT&T version of the phone. I have been reading and it appears that the two versions of the phone are the exact same hardware, so that means if we could simply flash the Verizon software on this phone everything would sunshine and rainbows. How would I go about doing this? What would prevent me from doing this? Please any suggestions are welcome!
It'll flash without issue, but network performance may vary using one carriers phone on another's network due to band support.
You can get the G930V firmware from sites like updato.com, sammobile.com, or using samfirmtool, G930U is also an option.
You'll need a patched Odin to get around mismatch errors https://forum.xda-developers.com/and...-13-1-t3762572
Some flash guides:
https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
I was originally under the impression they're all identical, but according to this thread there are some modem differences https://forum.xda-developers.com/galaxy-s7/help/att-sm-s930a-to-sprint-sm-s930u-t3913347 so YMMV
Beanvee7 said:
It'll flash without issue, but network performance may vary using one carriers phone on another's network due to band support.
You can get the G930V firmware from sites like updato.com, sammobile.com, or using samfirmtool, G930U is also an option.
You'll need a patched Odin to get around mismatch errors https://forum.xda-developers.com/and...-13-1-t3762572
Some flash guides:
https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
I was originally under the impression they're all identical, but according to this thread there are some modem differences https://forum.xda-developers.com/galaxy-s7/help/att-sm-s930a-to-sprint-sm-s930u-t3913347 so YMMV
Click to expand...
Click to collapse
You are awesome! Looks like that first link to the patched Odin doesn't work anymore, would you be able to give me a working one? Thank you so much though this is good to hear! Even if it doesn't work I have another phone I could use.
Beanvee7 said:
It'll flash without issue, but network performance may vary using one carriers phone on another's network due to band support.
You can get the G930V firmware from sites like updato.com, sammobile.com, or using samfirmtool, G930U is also an option.
You'll need a patched Odin to get around mismatch errors https://forum.xda-developers.com/and...-13-1-t3762572
Some flash guides:
https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
I was originally under the impression they're all identical, but according to this thread there are some modem differences https://forum.xda-developers.com/galaxy-s7/help/att-sm-s930a-to-sprint-sm-s930u-t3913347 so YMMV
Click to expand...
Click to collapse
Never mind on the link, I went and looked through your posts and found it. One more thing I need to bother you about is, when I flash it it says "Unsupport dev_type" on the phone, and Complete(Write) operation failed on ODIN. Any ideas?
From a google search that seems to be most commonly cause by flashing firmware for the wrong SoC, which firmware did you download and from where?
Other posts say make sure you run Odin as admin, and also on your phone go to setting> security and turn off 'reactivation lock'.
Beanvee7 said:
From a google search that seems to be most commonly cause by flashing firmware for the wrong SoC, which firmware did you download and from where?
Other posts say make sure you run Odin as admin, and also on your phone go to setting> security and turn off 'reactivation lock'.
Click to expand...
Click to collapse
By 'reactivation lock' do you by chance mean OEM unlock? And should I allow the device to be OEM unlocked or should I not allow that?
Different to OEM lock, its a security setting that will trigger FRP lock if you flash. But it's not an option on my own device, I just found it online.
Beanvee7 said:
Different to OEM lock, its a security setting that will trigger FRP lock if you flash. But it's not an option on my own device, I just found it online.
Click to expand...
Click to collapse
Yeah I can't find anything like that but when I'm in download mode it does say:
FRP LOCK : ON
So I assume that is something I need to address.
EDIT:
I'm using the patched 3.13 version of ODIN and it gets stuck on boot.img, but I assume that has something to do with FRP LOCK : ON
EDIT 2:
I might have soft bricked my phone actually. It appears that by flashing the new operating system while FRP LOCK was ON, it won't boot, recovery mode creates a boot loop, and ODIN is the only function I can effectively access. What would you suggest?
I might have soft bricked my phone actually. It appears that by flashing the new operating system while FRP LOCK was ON, it won't boot, recovery mode creates a boot loop, and ODIN is the only function I can effectively access. What would you suggest?
Try again the stock firmware the original carrier of the phone (AT&T?), or restoring with Samsung Kies/Smart Switch
This thread has a few other methods https://forum.xda-developers.com/note5/help/frp-lock-odin-firmware-lord-help-t3191927 (although for a different model, so dont try the linked firmware)
Beanvee7 said:
Try again the stock firmware the original carrier of the phone (AT&T?), or restoring with Samsung Kies/Smart Switch
This thread has a few other methods https://forum.xda-developers.com/note5/help/frp-lock-odin-firmware-lord-help-t3191927 (although for a different model, so dont try the linked firmware)
Click to expand...
Click to collapse
The only AT&T firmware I can find is this one:
https://forum.xda-developers.com/at...-g930a-stock-oreo-odin-g930aucu4cre4-t3803858
But the issue is the AP isn't in md5 format, and the BL is not wanting to cooperate.
Got it to go into a mode that says:
"Use the Emergency recovery function in the Smart Switch PC software."
So I downloaded both Kies and Smart Switch, but they both say "Unsupported Device" so I'm not quite sure why it has me use the software when it's not supported.
I also tried at downloading Samfirm but it wants the serial number of the phone, which I do not have.
What would be your next move?
EDIT: This might help the diagnosis, when I flash the full firmware I get an error on the phone that says, "SW REV CHECK FAIL : [aboot]Fused 8 > Binary 4, [1] eMMC write fail: aboot" and that seems to be the primary issue going on. I found another firmware for the USA AT&T and this keeps happening so that appears to be the main issue. A quick Google search tells me that my phone is a 8 binary and the ROM I'm flashing is a 4 binary. I honestly don't know what that means but I understand that the two numbers being different are the issue. Could you point me in the right direction for finding the right firmware?
I've used sideload before, any chance we can use sideload or does that require we be able to mount /system and have a ROM already installed and all that?
Thank you for your help!
Samfirmtool should work, I only ever recall having to enter the model number
Otherwise you can get it from
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930U/ATT/
or
https://updato.com/firmware-archive-select-model?q=SM-G930U&rpp=15&r=ATT&order=date&dir=desc&exact=1
The G930A now uses G930U firmware releases
That binary error I believe is because you're trying to flash a BL file older than what your phone has, and you can't downgrade bootloader
Beanvee7 said:
Samfirmtool should work, I only ever recall having to enter the model number
Otherwise you can get it from
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930U/ATT/
or
https://updato.com/firmware-archive-select-model?q=SM-G930U&rpp=15&r=ATT&order=date&dir=desc&exact=1
The G930A now uses G930U firmware releases
That binary error I believe is because you're trying to flash a BL file older than what your phone has, and you can't downgrade bootloader
Click to expand...
Click to collapse
I was able to get all of them to flash but AP, which hangs up on system.img.ext4 when flashed individually, with just AP checked. The model number has changed to SM-G930U, instead of SM-G930A, which it was before. So I know we're moving in the right direction, but I still can't get the AP to flash, and it either gets hung up on recovery.img or system.img.ext4, depending on what version of ODIN I use. It no longer gives me any mismatched model number errors though because of the new model number. We're heading in the right direction. Any ideas on it being held up though?
To confirm what you said earlier, you're using this patched Odin? https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Beanvee7 said:
To confirm what you said earlier, you're using this patched Odin? https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
I believe so but I went ahead and re-downloaded it and tried it again just to make sure I wasn't having a lapse in memory. I set it all up and ran it again and this is my log so far:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5418 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
and then it hangs there for what seems like forever. The model number has changed to G930U instead of G930A like it was so we're moving in the right direction. But it sits at that NON-HLOS.bin forever.
And just in case it matters my screen on my phone says:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930U
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B9(2, 1, 1, 1, 1) K9 S9
SECURE DOWNLOAD : ENABLE

SM-N950U mismatch AP CP and CSC, Cant flash official firmware( Malware )

So i bought this refurbished note 8 (SM-950U) T-mobile varient.
at first everything ran fine until i signed in my google account, thats when the phone starting doing random stuff, like opening playstore and downloading apps without notifying.
well that was the least of my concern, when i tried to update my device, it gave an error "Processing failed" as it failed to register the device.
This is what is in my device right now.
AP: N950USQS4CRE1
CP: N950USQU5CRG7
CSC: N9500ZZH2CRD5
AP and CP seemed ok as both are from the same models, but that CSC file is from SM-N9500 model and as far as i know that is from chinese region and from dual sim models.
The next thing i tried was flashing it through odin with stock firmware that i downloaded from Sammobile.
The files i download are these "
Build date:Thu, 26 Jul 2018 04:01:45 +0000
Security Patch Level: 2018-07-01
Product code: TMB
PDA:N950USQU5CRG7
CSC :N950UOYN5CRG7 "
cant post the links here
i tried to match atleast the build number of my device to the files i downloaded.
After loading the file in odin, connected my phone (turned on debugging mode and removed all of my accounts),
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4857 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
so after researching the internet i found that there were reports of malware in samsung devices in certain regions, and i am certain that i have got one in my phone, so i am really scared to put my passwords or data in it technically rendering it useless.
i cant return the phone, so im stuck with this.
Dude, try flashing TWRP and delete everything, the entire OS and then try to reflash stock ROM with Odin or just flash a custom ROM with TWRP, hope it'll help!
DankMemz said:
Dude, try flashing TWRP and delete everything, the entire OS and then try to reflash stock ROM with Odin or just flash a custom ROM with TWRP, hope it'll help!
Click to expand...
Click to collapse
thanks for the input bro, there was problem with kies and drivers, tried on other computer with same odin version and firmware and everything worked like a charm.
abidhaidary said:
thanks for the input bro, there was problem with kies and drivers, tried on other computer with same odin version and firmware and everything worked like a charm.
Click to expand...
Click to collapse
Glad to help!
hello there,
i've bought a refurbished Galaxy Note 8 and encountered similar problem (missmatch between AP, CP, and CSC)
and my camera results is really really poor, at first i think there were hardware problem and i've tried to change it with the new galaxy note 8 camera and the results is still same.
is there any suggestion regarding this issue ?
did i need to flash my device to its stock firmware ? if it so, what is the correct firmware for my device ?
this is information that shown when i dialed *#1234#:
AP : N9500ZHU4DSD1
CP : N950USQU5DSC1
CSC : N9500ZZH4DSD1
thank you for your helps,
is there a fix were you guys able to flash original OS n950U rom? I also noticed my phone can't run 4g

Categories

Resources