[Q&A] [TWRP] Moto Maxx Only - XT1225 - test builds only - Moto Maxx Q&A, Help & Troubleshooting

Q&A for [TWRP] Moto Maxx Only - XT1225 - test builds only
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TWRP] Moto Maxx Only - XT1225 - test builds only. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

one question
so i did follow the tutorial for root the moto maxx and all went very well, now im rooted and installed xposed and gravitybox working like a charm, but there was something that gave me a little doubt , when i boot to the recovery i did not see anything like TWRP if not rather like the stock that brings the moto maxx but nevertheless i did apply update from sd card and select the daroot.zip and it worked but I thought i was going to see something with TWRP interface . I did something wrong ? or what could it happen.

elgringoloco77 said:
I did something wrong ? or what could it happen.
Click to expand...
Click to collapse
yes... probably you got the wrong recovery
The root guide contains my first attempt to get root. That one is the stock recovery without zip signature checks.
In this thread you can get TWRP
just remember I do not recommend flashing this as well, just boot like the other (fastboot boot filename.img) and read the thread thoroughly

Why is this in the Verizon droid turbo section when it is not the Verizon phone?

leviwg said:
Why is this in the Verizon droid turbo section when it is not the Verizon phone?
Click to expand...
Click to collapse
1) The Moto Maxx is just a bootloader unlockable version of the Droid Turbo, you could use the same recovery on the Droid Turbo if its bootloader ever gets unlocked...
2) XDA never gave us a different forum even after requests, looking how dead things are in the Droid turbo forums... I doubt XDA will open a new forum... Probably just a subforum... Till then I guess there is nothing else we can do... Sorry!

thanks a lot
respider said:
yes... probably you got the wrong recovery
The root guide contains my first attempt to get root. That one is the stock recovery without zip signature checks.
In this thread you can get TWRP
just remember I do not recommend flashing this as well, just boot like the other (fastboot boot filename.img) and read the thread thoroughly
Click to expand...
Click to collapse
well then, but I have another question now , i downloaded the new recovery of TWRP and it booted successfully, but is there any way to flash the recovery and stays on the phone and don't have to boot it from the pc?

elgringoloco77 said:
well then, but I have another question now , i downloaded the new recovery of TWRP and it booted successfully, but is there any way to flash the recovery and stays on the phone and don't have to boot it from the pc?
Click to expand...
Click to collapse
sure, you can get at at your own risk using fastboot flash or dd

Parabéns
Consegui no meu Maxx aqui no Brasil, perfeito

Someone could provide the stock rom Moto Maxx XT1225 retbr ??? There is already a rom Nextel Brazil (niibr), but I'm sure everyone wants to retbr rom. Thank you!

Someone could provide the stock rom Moto Maxx XT1225 retbr ??? There is already a rom Nextel Brazil (niibr), but I'm sure everyone wants to retbr rom. Thank you!

The Moto Maxx will receive updating via ota with unlocked bootloader ?? I root the phone, just after reinstalled the stock recovery !!!
How to remove the message "Warning Unlocked Bootloader" Moto Maxx !!! Installed the logo.bin Moto X in 2014 but did not work because it was upside down and the image was small so I had to reinstall the original logo.bin Moto Maxx !!!

How to remove the message "Warning Unlocked Bootloader" Moto Maxx !!! Installed the logo.bin Moto X in 2014 but did not work because it was upside down and the image was small so I had to reinstall the original logo.bin Moto Maxx !!!

OTA update?
Hello there, I installed thi without any problem. Just a quick question:
When the Lollipop updates arrive, I will be able to receive & installing it? Or do I need to return to stock recovery?
Thanks!

jampajpl said:
How to remove the message "Warning Unlocked Bootloader" Moto Maxx !
Click to expand...
Click to collapse
[Moto Maxx] Remove unlocked bootloader Warning

Lollipop 5.0.2 versión 23.xxxxx? soak test is incompatible with TWRP
I can't boot TWRP in the latest Lollipop upgrade for Moto Maxx XT1225. I request to @respider to update TWRP ! Thank you

request? lol

Update TWRP
respider said:
request? lol
Click to expand...
Click to collapse
he.. sorry for my bad english.
Please update TWRP Recovery image for Moto Maxx! Do you need the boot.img or recovery.img?

Great work with TWRP... but i think the version i'm using is not the final one.
Could anyone please post the link of the final version?
thnak you in advance

rafaeltrin said:
Great work with TWRP... but i think the version i'm using is not the final one.
Could anyone please post the link of the final version?
thnak you in advance
Click to expand...
Click to collapse
Final version works fine, its in topic.

I`m having problems while tring to save the backup I did with TWRP into my computer.
Windows does not recognizes the TWRP forder...
Is there a way to save my TWRP backups on my computer?
I`m using android 5.0.2 RETAIL BR
Thank you in advance

Related

[Q&A] Stock firmware images

Q&A for Stock firmware images
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Please note that the latest 4.4.4 firmware images are no longer being uploaded to sbf.droid-developers.org.
It's better to check here: http://www.filefactory.com/folder/c6cdedc45a775d27 and read through the thread in OP for announcements about new firmware availability.
Be very careful with Fastboot commands and never 'fastboot erase all' or format random partitions.
XT1032 4.4.4 Retail US
is the full firmware 4.4.4 image of the "XT1032 4.4.4 Retail US" available?
cubk said:
is the full firmware 4.4.4 image of the "XT1032 4.4.4 Retail US" available?
Click to expand...
Click to collapse
Not yet. Hopefully soon.
delited
---------- Post added at 08:41 AM ---------- Previous post was at 08:36 AM ----------
I need 173.44.9. falcon_umts.AIO.en.US.
who can help please?
venul said:
I need 173.44.9. falcon_umts.AIO.en.US.
who can help please?
Click to expand...
Click to collapse
http://www.filefactory.com/file/1inpvzndmgop/AIO_XT1032_4.4.2-KXB20.9-1.10-1.9_CFC_1FF.xml.zip
Is the site going to come back up anytime soon?
primey said:
Is the site going to come back up anytime soon?
Click to expand...
Click to collapse
Unknown. Read through this thread for links to firmware images.
DO THESE BELONG TO XT1033 INDIAN VERSION-
http://www.filefactory.com/file/4k0..._4.4.4_KXB21.14-L1.40_34_cid7_CFC_1FF.xml.zip
www.rbu.xyz/stock-official-motorola...-dual-sim-4-4-4-lock-bootloader-t9481470.html (baseband version is written to be something different than what's desirable, rest all things are same)
??
Hey,
I am pretty new to all of this. I have bought a Moto G on Amazon Germany, it's a XT1032. I installed Cyanogen and it keeps freezing and I have to restart the phone once a day because it slows down.
The question: Can I use a GPE version? Any reason not to? I would use this one:
XT1032_GPE_444_Optimized_v1.1.zip
Cheers
RaeonSlaze said:
Hey,
I am pretty new to all of this. I have bought a Moto G on Amazon Germany, it's a XT1032. I installed Cyanogen and it keeps freezing and I have to restart the phone once a day because it slows down.
The question: Can I use a GPE version? Any reason not to? I would use this one:
XT1032_GPE_444_Optimized_v1.1.zip
Cheers
Click to expand...
Click to collapse
You can try GPE, without problems. Just follow a proper guide, the partition table between stock and gpe is different.
therover said:
You can try GPE, without problems. Just follow a proper guide, the partition table between stock and gpe is different.
Click to expand...
Click to collapse
You can use GPE without formatting 'userdata' by read the first post here and flash the GPE zip: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Basically you need to flash the non-GPE Stock 4.4.4 Kernel immediately after flashing the zip.
xt1034 wind mobile
I am in need of the wind mobile moto g xt1034 stock rom, or atleast the baseband files from it
useless2764 said:
I am in need of the wind mobile moto g xt1034 stock rom, or atleast the baseband files from it
Click to expand...
Click to collapse
XT1034 Basebands / Radios available here: http://forum.xda-developers.com/showthread.php?t=2649763 (Any region should work for you)
coool.....thanks man for this...!!
Lollipop Firmware
do u know when the Lollipop Firmware.tar.gz will come Or as u expected !! ???
http://forum.xda-developers.com/moto-g/general/lollipop-stock-rom-t3018568
Can I flash this ( http://forum.xda-developers.com/showthread.php?p=58534609#post58534609 ) Lollipop firmware on my Moto G LTE (XT1040)?
Radra said:
Can I flash this ( http://forum.xda-developers.com/showthread.php?p=58534609#post58534609 ) Lollipop firmware on my Moto G LTE (XT1040)?
Click to expand...
Click to collapse
No you can't
Sent from my Moto G
Moto G XT1033 issues
Please help me. Today i flashed an AsiaRetail Lollipop 5.0.2 Firmware with fastboot. But i didn't like it so i tried to flash 4.4.4 gpe again, flash a recovery and install a custom kitkat rom but after i flashed the 4.4.4 gpe, the rom just doesn't boot up anymore, it is stuck on the "Bootloader unlocked" screen. I tried to reflash the lollipop firmware over and over again, it just doesn't boot up anymore. Please, help me.
I mention that my Bootloader is the 41.18 version.

[Q&A] [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regi

[Q&A] [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regi
Q&A for [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regions)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RADIO][KERNEL][CWM] Stock Radio | Kernel Firmware Images (All Variants / Regions). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I have the xt1032 variant running Moto stock 4.4.4 with stock recovery.
If I flash GPe ROM and GPe stock recovery will I be able to receive lollipop update OTA?
EDIT: nvm. I posted in the wrong thread by mistake
Signal Problem
Boss, i have tried all of the above files related to my ph. but still i am not getting signal after converting my my moto g xt-1033 to gpe...
please help if anyone can help me... its a request... thanks in advance
Hi, can I flash 4.4.4 radio on a 4.4.2 Moto G? Thanks
WiFi and 3G not working on XT1088
I have a Moto G 2014 xt1088,
unfortunatelly I think I ran the command "fastboot erase all" and now I can't use WiFi and get 3G signal. I think if I replace the radio/modem via fastboot could solve it.
Can someone tell me if is possible, and what if I flash the xt1033 radio, it will boot?
Or someone could upload the xt1088 or xt1084 version.
Sorry my english.
Thanks.
smashen said:
Hi, can I flash 4.4.4 radio on a 4.4.2 Moto G? Thanks
Click to expand...
Click to collapse
Yes.
joaoricardo.rm said:
I have a Moto G 2014 xt1088,
unfortunatelly I think I ran the command "fastboot erase all" and now I can't use WiFi and get 3G signal. I think if I replace the radio/modem via fastboot could solve it.
Can someone tell me if is possible, and what if I flash the xt1033 radio, it will boot?
Or someone could upload the xt1088 or xt1084 version.
Click to expand...
Click to collapse
Unfortuantely if you really have used the fastboot command 'erase all' - you have lost your IMEI and there is currently no way to restore it. You have to return the phone to Motorola.
Anyone else reading this: NEVER, EVER use: Fastboot Erase all
Related:
Moto G (2014) forum
Moto G IMEI = 0
Other questions :S
Thanks for the support man,
just confirming, the WiFi depends of the IMEI too, right? even the WiFi I can`t restore?
And one last thing: only Motorola can repair it (or just replace the device), or may a regular repair phone store could do something? what if they replace physicaly the phone memory?
Sorry so many question, it`s my last. :angel:
Thanks again.
lost101 said:
Yes.
Unfortuantely if you really have used the fastboot command 'erase all' - you have lost your IMEI and there is currently no way to restore it. You have to return the phone to Motorola.
Anyone else reading this: NEVER, EVER use: Fastboot Erase all
Related:
Moto G (2014) forum
Moto G IMEI = 0
Click to expand...
Click to collapse
You should be able to get WiFi working. Try flashing full Motorola firmware image or custom ROMs.
Radio to XT1088
Could someone upload the radio to XT1088 Moto G 2 gen 8 GB from Brazil?
Thanks.
joaoricardo.rm said:
Could someone upload the radio to XT1088 Moto G 2 gen 8 GB from Brazil?
Thanks.
Click to expand...
Click to collapse
This forum is for Moto G (2013) only. Please make your request in the Moto G (2014) forum.
lost101 said:
This forum is for Moto G (2013) only. Please make your request in the Moto G (2014) forum.
Click to expand...
Click to collapse
Thank you and sorry.
I flashed Donkey Kang Kernel - V3.5 and did not work, I was caught in the first logo.
Flashed the original 5.0 version of the kernel and all returned to work perfectly but I am without Wifi, installed the modules version 4.4.4 kernel but without success.
Please someone that is running version 5.0 from Brazil can post your kernel modules?
Thank you in advance.
wagnerdd said:
Please someone that is running version 5.0 from Brazil can post your kernel modules?
Click to expand...
Click to collapse
Try these modules from GPE 5.0.1: https://www.androidfilehost.com/?fid=95864024717069088
It did not work friend, I am preparing a backup to an installation from scratch since last night trying to fix the Wifi problem just flashing the wrong (I think) radio and that was with only one sim card.
so if i flash 1031_Boost_US_CDMA_Kernel_3.4.42-gb89c9dd.zip on my boost moto g with cm12 rom it will get my phone signal working?
godlike777 said:
so if i flash 1031_Boost_US_CDMA_Kernel_3.4.42-gb89c9dd.zip on my boost moto g with cm12 rom it will get my phone signal working?
Click to expand...
Click to collapse
Possibly. It depends on the reason why you have no signal.
Does flashing 5.0.2 kernel and radio ensures update of 4.4.4 to 5.0.2 dual Sim xt1033?
I have received official OTA but hesitant as am rooted with xposed.
Any help?
Sent from my XT1033 using XDA Free mobile app
vikraminside said:
Does flashing 5.0.2 kernel and radio ensures update of 4.4.4 to 5.0.2 dual Sim xt1033?
I have received official OTA but hesitant as am rooted with xposed.
Click to expand...
Click to collapse
They aren't absolutely necessary to run Android 5.0.2. For example you can use this ROM with your current 4.4.4 Radio:
http://forum.xda-developers.com/moto-g/development/rom-retail-brazil-lollipop-soak-test-t2998793​
confusion
I have a gpe converted xt1033. Now I have restored stock 4.4.4 but I'm not getting any network. Should I flash the radio of dual sim version or single sim version since my phone was converted to gpe. Also rather restoring 4.4.4 Asia retail I should directly install stock 4.4.4 gpe and the radio of gpe.
hacnav said:
I have a gpe converted xt1033. Now I have restored stock 4.4.4 but I'm not getting any network. Should I flash the radio of dual sim version or single sim version since my phone was converted to gpe. Also rather restoring 4.4.4 Asia retail I should directly install stock 4.4.4 gpe and the radio of gpe.
Click to expand...
Click to collapse
You can flash the Dual-SIM 4.4.4 radio. Also flash the 'Kernel Modules' at the bottom of OP.

[FAQ] Frequently Asked Questions for the Motorola Moto G 2015 [Initial: 28/11/15]

[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]Motorola Moto G 2015 [/SIZE]
[SIZE=+1]a.k.a Moto G3[/SIZE]​
[SIZE=+1]This a short list of frequently asked questions in this device forum and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.[/SIZE]
[SIZE=+1]Q1: Which Moto G 2015 variant do I own?[/SIZE]To find out which variant you own, power off your phone. Now, hold down power+vol. down at the same time. You are now in bootloader mode; look for the fourth line down beginning "Product/Variant:". The code beginning "XT" (e.g. XT1541") is your variant. Press the power button once to reboot.
The following is a list of all the regional variants. See the original source below for frequency band support:
XT1540: Single-SIM (Retail US | Canada (Telus) | Latin America (Tigo, Movistar Mexico))
XT1541: Single-SIM (Retail EU | GB | SP | FR | GER)
XT1542: Single-SIM (Retail Latin America (Movistar Columbia))
XT1543: Dual-SIM (Retail Brazil | Latin America)
XT1544: Dual-SIM with Digital TV (HDTV) (Retail Brazil | Latin America)
XT1548: Single-SIM (US - CDMA Prepaid)
XT1550: Dual-SIM (Retail Asia | India)
XT1556: Dual-SIM (Turbo Edition)
Source: Variants of Moto G (3rd Gen), @lost101​
[SIZE=+1]Q2: Where's the Notification LED? Is it hidden, and how do I enable it?[/SIZE]As with previous Moto G versions, there is a hidden LED under the plastic earpiece in the top bezel.
You can enable it as a charging LED only using this root app. No progress seems to have been made to enable notification lights yet.​
[SIZE=+1]Q3: What sensors are in my Moto G?[/SIZE]Main sensors inside:
Dual Accelerometer
Magnetic field sensor
Orientation sensor
Ambient light sensor
Proximity sensor
Major sensors missing:
Gyroscope
The main functionality missing due to the lack of gyroscope is Photosphere.​
[SIZE=+1]Q4: Can I use a 64GB+ MicroSD card?[/SIZE]Yes, as long as it's formatted to FAT32.​
[SIZE=+1]Q5: How do I unlock my bootloader? Is this safe?[/SIZE]Firstly, you need the Android SDK installed to use fastboot. I will not tell you how to do this here as many guides exist on XDA already.
Unlocking your bootloader voids the warranty. Other than that, the warnings Motorola gives mainly pertain to what you may do to your advice after unlocking the bootloader, for example flashing TWRP then flashing random stuff you don't understand. Unlocking the bootloader itself will not harm your device (I don't have room for a discussion of exploits here).
To actually unlock your bootloader, simply follow the Motorola guide. The process includes receiving an unlock code from Motorola, therefore do not bother following any other unofficial guides.​
[SIZE=+1]Q6: How do I install TWRP to flash fun things like ROMs?[/SIZE]To begin flashing ROMs and kernels, etc., you need TWRP which is a custom recovery for Android. Read this and have a look at the TWRP website for more info if you are unsure at this point.
First of all you must follow Q3 above to unlock your bootloader. Once unlocked, read on...
Thanks to @squid2 you simply need to download his compiled image and flash using fastboot. Proceed to his thread here to download the latest binary build, "twrp-osprey-2.8.7-r4.img", from the "Downloads" tab, then follow his instructions for flashing the recovery.
A word of advice: I strongly recommend temporarily booting any images (be it recoveries or kernels) you are about to flash to your device. This is simply a case of using the command "fastboot boot blahblah.img" whether blahblah.img is a recovery or kernel.
There are many ways to boot into recovery. Firstly you can boot into bootloader with power+vol. down then select recovery with the volume buttons and press power to boot; The command "adb reboot recovery" on your computer if you have adb set up; By installing a terminal emulator from the market, then typing the commands "su" followed by "reboot recovery"; There are reboot apps on the market with advanced boot options also.​
[SIZE=+1]Q7: How do I root my Moto G?[/SIZE]This is primarily for stock ROM users as I believe most custom ROMs are rooted by default.
First of all you must follow Q3 and Q4 (in that order) to unlock your bootloader and flash TWRP. Once TWRP is installed, read on...
Download SuperSU here and place on internal storage or microSD card. Take a look here for more info on SuperSU. Now simply boot to recovery (see Q5) and flash the zip by pressing the "Install" button and locating the SuperSU zip file. Now reboot and open the SuperSU app.​
[SIZE=+1]Q8: I need a factory image (stock rom)! Where can I find these?[/SIZE]Look in @lost101's thread, [INDEX][Osprey] Moto G Factory Firmware Images, and refer to Q1 above to find out which one you need.​
[SIZE=+1]Q9: My Moto G is quiet, how do I boost the volume?[/SIZE]Refer to @hp420's thread: [Mod] Native volume boost - no apps needed! mixer_paths.xml​
[SIZE=+1]Q10: Where can I find custom ROMs and kernels?[/SIZE]Check out my own Osprey Oracle.​
*​
Forum Rules | New Users Guide | XDA Tour | Report Posts​
This FAQ is part of a Recognized Contributor Group Initiative. Please look for a similar FAQ thread when visiting another device forum.
A special thanks to everyone who contributed to the production of this FAQ​
reserved
and again
HTCDreamOn said:
[SIZE=+1]Q10: Where can I find custom ROMs and kernels?[/SIZE]@banerjeeayan1996 has compiled a list of all the custom ROMs and kernels available in this thread: [Moto G(3rd gen)]Link Catalogue. It is not 100% up-to-date (e.g. it's missing CM13) but unless it is not updated for a significant time I will keep the link here. Other useful threads are linked within it also; have a browse.​
*​
Click to expand...
Click to collapse
Sorry for the trouble i have updated the guide now with cm13.
Please change the line about not updated.
banerjeeayan1996 said:
Sorry for the trouble i have updated the guide now with cm13.
Please change the line about not updated.
Click to expand...
Click to collapse
Ahh! Please don't quote the whole OP! I'll edit mine if you edit yours this thread should be easily readable.
HTCDreamOn said:
Ahh! Please don't quote the whole OP! I'll edit mine if you edit yours this thread should be easily readable.
Click to expand...
Click to collapse
Ok sorry and thanks for updating.
Motorola apps ( like in camera app slow motion video recording not working ) not work properly with cm 13 plzzz compile it for cm 13
m.sha00rma said:
Motorola apps ( like in camera app slow motion video recording not working ) not work properly with cm 13 plzzz compile it for cm 13
Click to expand...
Click to collapse
Remember cm13 is still in early stage.
Thanks for the thread. Is there one for "tips" possibly ? I'm wondering for instance if there's a way to use either of the two gestures to launch other apps than the Flashlight or the camera. Like turning the G3 on and off for instance, thanks!
webvan said:
Thanks for the thread. Is there one for "tips" possibly ? I'm wondering for instance if there's a way to use either of the two gestures to launch other apps than the Flashlight or the camera. Like turning the G3 on and off for instance, thanks!
Click to expand...
Click to collapse
Not yet, all questions have to be asked in a new thread at the moment. Might make a help thread in the future but certainly no time right now, I'll speak to other RCs/ mods to check that's the way forward though or if they'd rather stick to just making new threads for every question.
This thread is not meant as a tips thread though. I may add a few if they're oft-requested however.
As for your q I'm not sure, the moto app can't but check out lmt gestures and other 3rd party gesture apps. The dual accelerometer thing is quite unique however so you may not find anything.
I recently purchased a XT1541 for my wife.
I always had rooted phones for apps like Greenify and AdAway. My OnePlus One has an unlocked bootloader, but is still under warranty.
So my quick and dirty question. Seems to me that there's NO way to gain root access on a Moto G3 without unlocking its bootloader (and voiding warranty). Is it true? Anyone can confirm that?
Thank to all of you and a happy new year!
fastleo63 said:
I recently purchased a XT1541 for my wife.
I always had rooted phones for apps like Greenify and AdAway. My OnePlus One has an unlocked bootloader, but is still under warranty.
So my quick and dirty question. Seems to me that there's NO way to gain root access on a Moto G3 without unlocking its bootloader (and voiding warranty). Is it true? Anyone can confirm that?
Thank to all of you and a happy new year!
Click to expand...
Click to collapse
This thread isn't a help thread, please post questions as a new thread in this forum. A quick Google would show you can't root without unlocking the bootloader as the kernel is too new for exploits such as towel root.
So yes, unlock the bootloader using the steps in the op.
please delete this post. ty
One question
I want to make custom roms for our device. Well we have cm roms and I really appreciate the work done by the devs.
I can not root my device because its my parents phone so they will not allow me.
Wanna ask anybody can test my builds?
EDIT: I think cm is good enough. Because everyone loves cyanogeod more then any other roms like omni slims etc.
Apologies for posting this.
Regards
FireLord
Why CM?
We have CM already for our device!
Probably you better try MUI 7.1 or LeWa OS, something different based on Stock ROM is welcome!
And you have my help for that if you want!
I want to buy Moto G 3rd generation indian phone. Please tell me is there official cm rom available for it or not.
Also, link me the xda forum for moto g 3rd gen.
thanks
After flash the SuperSU (BETA-SuperSU-v2.67-20160121175247) and reboot, my phone stop on warning bootloader unlocked screen. What can I do now? Is anybody can confirm the working version of the twrp and supersu? Model: XT1540
su35 said:
After flash the SuperSU (BETA-SuperSU-v2.67-20160121175247) and reboot, my phone stop on warning bootloader unlocked screen. What can I do now? Is anybody can confirm the working version of the twrp and supersu? Model: XT1540
Click to expand...
Click to collapse
Which version of TWRP!
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
shahfaishal said:
I want to buy Moto G 3rd generation indian phone. Please tell me is there official cm rom available for it or not.
Also, link me the xda forum for moto g 3rd gen.
thanks
Click to expand...
Click to collapse
Yes is available! And you're in his forum!!
ExHamza said:
Which version of TWRP!
Thanks for your reply. The TWRP is 3.0. It looks like the supersu will modify the system files, I flash a wrong version of supersu. Now, I just flash a stock rom.
Click to expand...
Click to collapse
Which model is the developer edition?

New Moto G...update from 4.4.2 before rooting?

I just got a new Boost Moto G that came with 4.4.2. Upgrade is available. I plan to root and flash CM13 as I have on my GS3. Can I just go from here or should I upgrade to 5.1 via carrier before rooting and flashing a ROM? Does it make a difference? I have everything downloaded and ready to go for rooting on 5.1 as the phone was advertised as coming with 5.1 installed, and I hadn't planned for this situation.
Thanks!
Hi,
Can i ask what's the exact model of your Moto G ? (XT10**)
If it's a 1031, i suggest you to look the great emptiness of available roms before doing something...
Always if it's a 1031, suggest you to do your update and root it...sadly, i think it will be the most you can do for it but i hope i'm wrong and some dev will do something for you and other owners.
You can also unlock it anyway, install a custom recovery and flash it with optimized rom from here :
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
but i'm afraid it will be the best you can do for the moment...
satanas17 said:
Hi,
Can i ask what's the exact model of your Moto G ? (XT10**)
If it's a 1031, i suggest you to look the great emptiness of available roms before doing something...
Always if it's a 1031, suggest you to do your update and root it...sadly, i think it will be the most you can do for it but i hope i'm wrong and some dev will do something for you and other owners.
You can also unlock it anyway, install a custom recovery and flash it with optimized rom from here :
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
but i'm afraid it will be the best you can do for the moment...
Click to expand...
Click to collapse
I'm not sure, it says 175.44.1 falcon-cdma-boost, model Moto G. It was a "certified preowned" for 29 bucks from Boost lol
So CM13 nightly won't work on this one if it is 1031? I thought it was for falcon? Honestly, all I want to be able to do is apply CM themes and do a few tweaks to the status bar.
static.chaos73 said:
I'm not sure, it says 175.44.1 falcon-cdma-boost, model Moto G. It was a "certified preowned" for 29 bucks from Boost lol
So CM13 nightly won't work on this one if it is 1031? I thought it was for falcon? Honestly, all I want to be able to do is apply CM themes and do a few tweaks to the status bar.
Click to expand...
Click to collapse
Sorry, i don't own one and i'm not from US, so i just report you things i read...
Take a look and try to find a rom for 1031...another one that what i've proposed, of course...
As you wrote : 29 bucks...
Sad to see Moto G's finishing their nice career in such harsh way but keep in mind that they came out in 2013...
Nice phone, love my XT 1039 but it's not given to every model to be an HTC HD2 like...
satanas17 said:
Sorry, i don't own one and i'm not from US, so i just report you things i read...
Take a look and try to find a rom for 1031...another one that what i've proposed, of course...
As you wrote : 29 bucks...
Sad to see Moto G's finishing their nice career in such harsh way but keep in mind that they came out in 2013...
Nice phone, love my XT 1039 but it's not given to every model to be an HTC HD2 like...
Click to expand...
Click to collapse
Yeah I was looking through and the CM13 is for 1031 too, so I'll give it a shot. Thank you for your help!
static.chaos73 said:
Yeah I was looking through and the CM13 is for 1031 too, so I'll give it a shot. Thank you for your help!
Click to expand...
Click to collapse
NICE, i've missed it but glad for you i have...
Try it, nice one...some minor bugs only...be careful, follow instructions and everything will be OK...
Try to avoid CM recovery if you can, prefer TWRP if it's available and let us know results
satanas17 said:
NICE, i've missed it but glad for you i have...
Try it, nice one...some minor bugs only...be careful, follow instructions and everything will be OK...
Try to avoid CM recovery if you can, prefer TWRP if it's available and let us know results
Click to expand...
Click to collapse
I was actually wondering if I can use the newer version of TWRP. I have 2.8.6.0 on my other phone. Do you by chance know if 3.0.0.0 will work with CM13 on xt1031?
static.chaos73 said:
I was actually wondering if I can use the newer version of TWRP. I have 2.8.6.0 on my other phone. Do you by chance know if 3.0.0.0 will work with CM13 on xt1031?
Click to expand...
Click to collapse
For CM13, sure (just done now a test flashing my previous CM12.1 based BlissPop and back on my daily driver MM CM13 Bean Stalk for another Mate who asked for in Peregrine (XT1039) section. Everything worked flawlessly !!!)
For your CDMA, not so sure...use the latest who's totally safe !!!
2.8.7.0 would be nice & enough if you can find it but 2.8.6.0 must be enough too imao...
satanas17 said:
For CM13, sure (just done now a test flashing my previous CM12.1 based BlissPop and back on my daily driver MM CM13 Bean Stalk for another Mate who asked for in Peregrine section. Everything worked flawlessly !!!)
For your CDMA, not so sure...use the latest who's totally safe !!!
2.8.7.0 would be nice & enough if you can find it
Click to expand...
Click to collapse
I am looking at the TWRP site and did some research...apparently the xt1032 version works on the 1031 but some roms won't install with TWRP because of the model number discrepancy. So I'm looking around to find out if CM13 checks for model number in recovery to flash...some require it and some don't, apparently.
static.chaos73 said:
I am looking at the TWRP site and did some research...apparently the xt1032 version works on the 1031 but some roms won't install with TWRP because of the model number discrepancy. So I'm looking around to find out if CM13 checks for model number in recovery to flash...some require it and some don't, apparently.
Click to expand...
Click to collapse
Yep, i've heard about those tips...Think i've seen a trick too for modifying something to make it work but sorry, can't tell you what/where it is
Be careful, if you're not sure !!!
Maybe wait for another advice would be a smart thing...
We can try to ask help from @lost101 too, if he could help with this case...he is original/optimized roms Great Guru for all Moto G's & E's
satanas17 said:
Yep, i've heard about those tips...Think i've seen a trick too for modifying something to make it work but sorry, can't tell you what/where it is
Be careful, if you're not sure !!!
Maybe wait for another advice would be a smart thing...
We can try to ask help from @lost101 too, if he could help with this case...he is original/optimized roms Great Guru for all Moto G's & E's
Click to expand...
Click to collapse
thanks! I'll keep searching around, sure I'll find something.
static.chaos73 said:
thanks! I'll keep searching around, sure I'll find something.
Click to expand...
Click to collapse
:good: Keep the faith !!!
Before you do anything, unlock the Bootloader:
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6​
Then flash the 5.1 Factory Firmware Image: (Fastboot Tutorial)
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795​
From that point you can move on to custom ROMs if you wish.
To clarify, you have an XT1031 Moto G.
lost101 said:
Before you do anything, unlock the Bootloader:
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6​
Then flash the 5.1 Factory Firmware Image: (Fastboot Tutorial)
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795​
From that point you can move on to custom ROMs if you wish.
To clarify, you have an XT1031 Moto G.
Click to expand...
Click to collapse
Thanks for your help, @lost101

[Completed] Moto E 2g (2015) Unroot !

Hello Members,
Can anybody explain me about how to unroot of Moto E 2g (2015) version running on android 5.0.2 version?? Previously I unlocked the bootloader and installed TWRP and Super SU as well.
I would appreciate if you provide the necessary links for downloads as well.
Please help !
Thanks !
msbhat0321 said:
Hello Members,
Can anybody explain me about how to unroot of Moto E 2g (2015) version running on android 5.0.2 version?? Previously I unlocked the bootloader and installed TWRP and Super SU as well.
I would appreciate if you provide the necessary links for downloads as well.
Please help !
Thanks !
Click to expand...
Click to collapse
Hello and Welcome to XDA-developers!
Open supersu > Settings > Complete remove root
FSadino said:
Hello and Welcome to XDA-developers!
Open supersu > Settings > Complete remove root
Click to expand...
Click to collapse
Hello,
Thank you for your reply. I red the same from some google pages but I would like to flash stock Firmware again in Moto E 2g so please send me the steps for the same.
Also please let me know Firmware and ROM both are same concept and different concept in Android.
Further, when I turned on my rooted phone it is directly going to fastbood and showing the reason for Fastbood as below:
Fastboot reason: UTAG "bootmode" configured as fastboot issue
So how can I fix this issue.
Thanks a ton for your rich and valuable reply in advance.
Am waiting !!
msbhat0321 said:
Hello,
Thank you for your reply. I red the same from some google pages but I would like to flash stock Firmware again in Moto E 2g so please send me the steps for the same.
Also please let me know Firmware and ROM both are same concept and different concept in Android.
Further, when I turned on my rooted phone it is directly going to fastbood and showing the reason for Fastbood as below:
Fastboot reason: UTAG "bootmode" configured as fastboot issue
So how can I fix this issue.
Thanks a ton for your rich and valuable reply in advance.
Am waiting !!
Click to expand...
Click to collapse
Your original question was:
Can anybody explain me about how to unroot of Moto E 2g (2015) version running on android 5.0.2 version??
I assume that is solved right? If you have more questions not related to How Unroot feel free to open a different thread.
Thanks and good luck
FSadino said:
Your original question was:
Can anybody explain me about how to unroot of Moto E 2g (2015) version running on android 5.0.2 version??
I assume that is solved right? If you have more questions not related to How Unroot feel free to open a different thread.
Thanks and good luck
Click to expand...
Click to collapse
No, I will try it but along with the unroot I need to flash stock firmware also hence asked those questions.
Also rest of the issues are relating to rooting and unrooting of the device hence I asked in the same thread.:angel:
Please do the needful !

Categories

Resources