it's empty i try to flash clockworkmod and original version
I can't root
The recovery is not sticking, which is pretty common with alot of us. Simply go into CWM and flash the latest recovery and then reboot. Your recovery will work then (atleast for that time)
a) use adb to flash the cwm recovery (fastboot flash recovery recoveryimagename.img)
b) start recovery on device
c) root via flashing superuser zip
d) reboot phone
e) download a file explorer capable of read and write operations (eg SuperManager)
f) start file explorer and set read/write enabled
g) rename install-recovery.sh (eg to install-recovery-old.sh) in /system/etc folder
h) flash cwm recovery again using adb (basically repeat a))
Now your recovery won't be deleted after a reboot.
I am asking which file and where do i put it? I read somewhere else that you have to flash clockworkmod every time you wanna go into recovery. And somewhere else i read that you put "this" file on root so you do not have to flash cwm every time.
I have been having issues with cwm going into recovery.
Thanks
How to fix cwn recovery that it doesn't disappear every reboot:
a) flash recovery
b) root via recovery (install from zip)
c) boot into android
d) download SuperManager
e) give read/write access in SuperManager
f) rename install-recovery.sh which is in /system/etc to something else
g) boot into fastboot
h) flash recovery again
This time it'll stick through.
Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you
rogerodd said:
Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you
Click to expand...
Click to collapse
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!
okantomi said:
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!
Click to expand...
Click to collapse
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.
rogerodd said:
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.
Click to expand...
Click to collapse
The problem is that you can't flash anything from the external sdcard with v4.0.0.4. In rom manager, see if you can find"all clockwork recoveries" and find 3.2.0.0. If not, find 3.0.2.8 or 3.0.2.5 and flash one of them, preferably the latest of those I have listed. I think those will at least recognize your sdcard. If you can't do that, you will need to reflash the correct recovery the same way you did when you rooted. Remember, never flash a zip file through adb.
Good luck!
I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you
possible bad download... download again... also, don't think this would be an update... leave it as originally named, just choose the option to choose which zip file to install from the sd card
rogerodd said:
I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you
Click to expand...
Click to collapse
It sounds like you are flashing recovery ok, but you keep overwriting it with the stock recovery.
Here is some important information that should help a lot with making your new recovery "stick"and this was taken from the Idiot's guide to flashing...in the Development section, and originally written by publicanimal:
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
Boot into flash mode with 'adb reboot bootloader'
Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo this section
Enter CWM with the following procedure
Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. If that happens, or if you see "starting fastboot protocol " your timing wasn't right and you need to reflash the recovery image and try it again.
See original post,below for more information.
http://forum.xda-developers.com/showthread.php?t=1130996
so i have the nexus s 4g for sprint and have the phone rooted and superuser installed...worked fine and i downloaded a new ice cream rom i wanted to install but when i hold the power button and volume button it takes me to the bootloader screen so i click the recovery tap and then it just goes to a sceen that shows like an exclamation mark inside of a triangle next to a android guy? what the hell isnt it going into CWM? please advise
You're able to boot normally? Just download clockwork mod and flash recovery, then try again.
Sent from my obnoxious finger using Swype
clockworkmodrecovery rom manager find and install
open it and touch flash clockworkmod recovery(first item)
select reboot into recovery manual
mount and storage select
mount USB storage
unmount
++++ go back +++++
install from zip sdcard
find
'' super user.zip'' flash
reboot
es file explorer select setting mark root explorer and mount file system after
select phone in file explorer find ''etc'' folder select and find ''install-recovery.sh'' file and rename file for example ''install-recovery.sheski'' and
open rom manager again touch flash clockworkmod recovery(first item)
check it...
please click thanks button
use root explorer rename or delete /system/etc/install-recovery.sh
and then go fastboot and reflash recovery img again
if you don't have root explorer , then every time you go to recovery , you must flash recovery img at fastboot mode , every time !!!
sorry guys but alot of this is new to me and im learning as i go. if i just rerun the one click root again will that install the cwm ?
no use this method
clockworkmodrecovery rom manager find and install
open it and touch flash clockworkmod recovery(first item)
select reboot into recovery manual
mount and storage select
mount USB storage
unmount
++++ go back +++++
install from zip sdcard
find
'' super user.zip'' flash
reboot
es file explorer select setting mark root explorer and mount file system after
select phone in file explorer find ''etc'' folder select and find ''install-recovery.sh'' file and rename file for example ''install-recovery.sheski'' and
open rom manager again touch flash clockworkmod recovery(first item)
check it...
please click thanks button
figured it out thanks for all who gave advice..
Today I gonna show you how to install CWM/TWRP/PHILZ/OTHER Recovery on android without pc/computer/root.
For this you will need to Download
Apps.zip from here
Cwm recovery from here for your device
Twrp recovery from here for your device
Philz toucewiz recovery from here or mirror for your device
if your device not listed here you will search on google for a custom recovery for your device.
After download your device recovery look like that extentions :
1. (.img) file
2. (.tar) file
3. (.md5) file
if your recovery look like 1. you don't need to rename it.
but look like 2,3 you need to rename with extantion (.tar)
and then extract the (.img) file for flash in next step.
after download the app.zip you need to extract the file using any extractor you Download Es file explorer from here
after extracting the file you will show two apps.
install king user.
if your phone is rooted you don't need to install this.
then install Rashr.
and open and grant the root permission.
then select Recovery from storage.
open the folder where you extract (.img)file
click the (.img) file then.
a dailauge came press yes,please
wait again a dailauge came press yes,please
your mobile took restart.
go to recovery mode.you will show that recovery has been instaled succesfuly
now enjoy.......
How to download no 2 file