Hi all.
My unrooted SHW-M480W got suddenly stuck in a samsung logo bootloop.
I can access system recovery and download mode, and my device is able to connect to odin (but not kies).
Recovery mode shows:
Code:
E: failed to mount / system (Invalid argument)
can't mount '/system' (invalid argument)
E: failed to mount / system (Invalid argument)
E: File Open error '/cache/recovery/log'
E: can't open /cache/recovery/log
E: File Open error '/cache/recovery/last_log'
E: can't open /cache/recovery/last_log
E: File Open error '/cache/recovery/last_install;'
E: can't open /cache/recovery/last_install
I downloaded the CF Auto-Root: p4notewifiany for the SHW-M480W (auto-reboot and F. Reset Time checked)
but Odin is unable to flash it:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiany-p4notewifiany-shwm480w.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried to flash the official Android 4.4.4 firmware PDA: M480WKXUBNI6 (2.7 GB)
same result:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M480WKXUBNI6_M480WANYBNI6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I go from here to recover my tablet?
Any help would be appreciated, I am very new to this whole flashing my tablet thing.
after reading through more threads it seems that this is a widespread problem.
The only solution people have put forward is to repartition.
Can anyone provide me with the correct PIT file for the M480W?
Related
tried to flash cm9 on i9100G running ics.
odin flash keeps failing and the phone doesnt go past the samsung start screen.
keep getting
"<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Sbl.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
on odin....
what am I supposed to do?
p.s:tried a new pit file too... didnt work....
I wanted to root my phone so i checked this thread out.
I installed ClockworksMod in Odin and it was sucsessful:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMtouch-i9105_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Then i should install SuperSU, i got into recovery mode and selected: apply update from external storage, choose the zip file and it says:
Code:
-- Install /sdcard
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:failed to verify whole-file signature
E:signature verification failed
Can anyone help?
Using a Samsung Galaxy S2 plus NFC
Thanks
K
i am getting a message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
So I booted in download mode and tried to install the stock rom on odin and it fails
What am i doing wrong?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU2BOC8_N915PSPT2BOC8_N915PVPU2BOC8_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Hello there, this is the story of a pleb trying to downgrade the firmware on his Galaxy S5 SM-G900A and failing miserably. I tried to use odin to flash the stock android 4.4.2 md5 file on SamMobile and whenever I try I get <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the downloading screen I get SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1.
I tried to use Kies with the "Firmware Upgrade and Initialisation" and I got to the point where it's installing the new software and then it says there has been an unexpected error and it gives me the option to do an emergency firmware recovery but it doesn't give me a recovery code.
Please Help
XOXO
-Dan
Hi, I have a Note 4 N910C
I flashed a unofficial cm13 rom. When I flashed it at the Samsung's screen showed "Kernel is nor seandroid enforcement" , but the rome worked ok so I didn't care.
When I tried to flash Sweet Rom 5.0.1, i got this error
symlink: some symlinks failed
E: Error in /**zip's directory**
(status 7)
Installation aborted.
So, after this I tried to flash a stock 5.0.1 rom with Odin v3.09, i got this problem
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
But the rare thing is that I tried to flash back the cm13 rom and it works. Now i can only use it with this rom.
PLEASE SOMEONE HELP ME!!
I woukd suggest posting on your device's forum and the issue might be the ZIP of the ROM you're trying to flash. Try other ROMs or another recovery such as TWRP