Database Info

HTC Inspire 4g AT&T useless

Hi all, try to be brief, but not simple:
First, I swear I've read many posts with cases similar to mine and I tried so many commands and tricks without success, so I decide to publish mine.
I have an HTC Inspire 4G, AT&T, rooted, S-off, and running Trickdroid. After a while I decided to return it to the original stock. However, when using the RUU utility, I got an error message and my phone it ruined.
Try to summarize as much as possible the conditions and the current situation:
Environments: Windows XP, Windows 7, Mac OS.
Power not work
Power + Vol Down do not work.
If I connect it to the outlet orante LED turn on, and charging it, but I must not press any buttons at all, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later.
I have access to fastboot commands, but not ADB. I tried to format the partitions, reflash, do recovery, recover partitions, etc, endless commands that do not give me a result.
The information obtained from the achievement of limited screen or fastboot commands is as follows:
ACE PVT HIP S-OFF RL
HBOOT-0.85.0019
MICROP-0438
RADIO-26.06.04.06_M
eMMC-BOOT
Dec 27 2012, 14:47:30
RUU​
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0019
(bootloader) version-baseband: 26.06.04.06_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 2.47.502.7
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9812000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4196mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-9854d819
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.171s​
fastboot oem boot
< waiting for device >
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D08BECC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x27E0E
(bootloader) TAG:hero panel = 0x830012
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is CWS__001
(bootloader) setting->cid::CWS__001
(bootloader) serial number: HT19VT207144
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =506
(bootloader) active commandline: board_spade.disable_uart2=0 board_spade.
(bootloader) usb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=true androidboot.baseband=26.06.04.06_M androidboot.cid
(bootloader) =CWS__001 androidboot.batt_poweron=good_battery androidboot.
(bootloader) carrier=ATT androidboot.mid=PD9812000 enable_zcharge=1 andro
(bootloader) idboot.keycaps=qwerty androidboot.mode=normal androidboot.se
(bootloader) rialno=HT19VT207144 androidboot.bootloader=0.85.0019 zygote_
(bootloader) oneshot=off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) Delay 98712(us) for dpram command before goto AMSS...
(bootloader) jump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:0 msec
FAILED (status read failed (Too many links))
finished. total time: 232.216s​
I used the commands, among many others:
Fastboot oem boot
fastboot flash recovery recovery.img (or zip)
fastboot oem resetRUUflag
fastboot reboot -bootloader (this just turn the phone off)
fastboot oem get_identifier_token (answer: (bootloader) [ERR] Command error !!!)
fastboot format userdata
formatting 'userdata' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.020s​fastboot format cache
formatting 'cache' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.017s​
In many cases the response message in the command line is: remote no allowed
SD card formatted.
I have no access to the SD card from the phone connected.
Please tell me if there is any other way to recover my phone, or if it is just an expensive piece of nothing.
Thanks for everything.

What happened when you tried to flash recovery from fastboot?

bananagranola said:
What happened when you tried to flash recovery from fastboot?
Click to expand...
Click to collapse
./fastboot flash zip PD98IMG.zip
sending 'zip' (3619 KB)...
OKAY [ 0.623s]
writing 'zip'...​
No more response, stuck there...
In many other commands (I just don't remember after trying several) I got the message "remote not allowed"

Frogzter said:
./fastboot flash zip PD98IMG.zip
sending 'zip' (3619 KB)...
OKAY [ 0.623s]
writing 'zip'...​
No more response, stuck there...
In many other commands (I just don't remember after trying several) I got the message "remote not allowed"
Click to expand...
Click to collapse
That's because you need a recovery.img, not a PD98IMG.zip:
Code:
fastboot flash recovery recovery.img

bananagranola said:
That's because you need a recovery.img, not a PD98IMG.zip:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I got this:
./fastboot flash recovery r.img
sending 'recovery' (4456 KB)...
OKAY [ 0.764s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.771s
Why?
Click to expand...
Click to collapse

Is your phone in fastboot mode?

bananagranola said:
Is your phone in fastboot mode?
Click to expand...
Click to collapse
Yes, it is, or at least I think so, because the command fastboot devices, found my device, besides, the command fastboot getvarr all, also works...

No more responses guys?

Where are you getting the recovery? How are you putting your phone in fastboot? Are you running the command from the folder where the recovery is? Are you sure you are S-Off?

bananagranola said:
Where are you getting the recovery? How are you putting your phone in fastboot? Are you running the command from the folder where the recovery is? Are you sure you are S-Off?
Click to expand...
Click to collapse
Power button not work
Power + Vol Down not work either.
If I connect it to the outlet orange LED turn on, and charges the battery, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later, after this 10 minutes, if I connect via USB the device is responsive to fast boot devices command...
besides the screen shows:
ACE PVT HIP S-OFF RL
I have to command and the recovery file in the same folder

Er, what about the rest of my questions? How are you getting to fastboot with broken buttons? Is there an "adb reboot fastboot"?

Frogzter said:
Power button not work
Power + Vol Down not work either.
If I connect it to the outlet orange LED turn on, and charges the battery, after ten minutes, HTC logo appears with four exclamation marks on the screen. However, Windows can not find the device until 5 or 10 minutes later, after this 10 minutes, if I connect via USB the device is responsive to fast boot devices command...
besides the screen shows:
ACE PVT HIP S-OFF RL
I have to command and the recovery file in the same folder
Click to expand...
Click to collapse
What RUU did you use?? that sounds like a messed bootloader....

bananagranola said:
Er, what about the rest of my questions? How are you getting to fastboot with broken buttons? Is there an "adb reboot fastboot"?
Click to expand...
Click to collapse
I don't do anything.. I can't... if I plug the usb cable and touch any button nothing happen but if just plug it and let the phone alone, after 20 minutes do to fastboot mode...
"adb devices" don't detect the device.. just "fastboot devices" does

glevitan said:
What RUU did you use?? that sounds like a messed bootloader....
Click to expand...
Click to collapse
Well, now I feel ashamed, I can't remember with one I used... I just google the last version, because I wanted to get back to the original rom...
I formatted the computer with MAC OS, Linux, Win 7 and Win XP, looking for fix it, so I don't have much trace of with one I used.

HTC INSPIRE. att cws_001 bootloader 2.00.0030 s-on
Same thing on mine except my phone never comes on but fastboot is the only thing that recognizes my phone with limited commands. when I do a faceboot devices I get this ☺ ⌠σ fastboot no serial numbers as it use to have. Phone will not turn on at all. while nothing plugged in no light or anything even when trying to power on or get to hboot no sign of life at all. When I plug it in I get solid orange light. Pc sees it as android usb devices - my htc. but stock rom exe dont find phone. this happened to me when I was using xlmultitool 2.1. I was tyring for s 0ff after the option to [5] Flash HBOOT S-OFF Unprotected (via adb) this is when my troubles started. cant flash anything to it. when I try to flash the stock rom I get error file to big. In need of help.......I do have a gold card....
C:\Android>fastboot flash zip PD98IMG_Inspire_S-ON_FactoryRestore_GB_1.07.zip.
sending 'zip' (315734 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader:
(bootloader) version-baseband: 26.09.04.11_M2
(bootloader) version-cpld: ☺
(bootloader) version-microp: ☺
(bootloader) version-main: ♦
(bootloader) serialno: ☺ ⌠σ
(bootloader) imei: 3544550xxxxxxxx ......just sits here tells me nothing more
C:\Android>fastboot flash recover recovery.img
< waiting for device >
sending 'recover' (5532 KB)...
OKAY [ 0.624s]
writing 'recover'...
FAILED (remote: partition does not exist!)
finished. total time: 0.625s
C:\Android>fastboot flash system system.img
sending 'system' (571388 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.002s
C:\Android>fastboot oem boot
...
(bootloader) [DISPLAY_ERR] allocate heap for splash image fail!!!
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [ERR] Boot/Recovery image does not exist!!!
OKAY [ 0.116s]
finished. total time: 0.117s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.008s
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 1.004s]
finished. total time: 1.005s

sorry to double post but its been about a year is there a fix for this please someone help....

wacky_35016 said:
sorry to double post but its been about a year is there a fix for this please someone help....
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.008s
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 1.004s]
finished. total time: 1.005s
Click to expand...
Click to collapse
Sounds like it's still s-on. Where did you get your Unlock_code.bin from? Have you tried using htc dev to get one or a new one?

[Q] Finally i bricked my HTC SENSATION !!!!

hi every one
i was trying to match the RIL/basebande versions
i tried to flash some radio files and i dont know what it happend (i really forget what i did exactlly)
sudenlly i pressed the hard reset in the hboot (yes i remember i did this)
after that i tried to reflash a radio file via fastboot
i notices that in my hboot it's writen like this
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
now when i try to flash PG58IMG (radio) it says fail-PU
i thaught that i'm still s-on because that pink LOCKED which written above (even it's written s-off under it !!!!!!!!)
okay i was able to change between hboot version by just flashing the hboot zip file and that's all so i tried to do that like i was
now when i try to flash the hboot (PG58IMG) it says alsi fail-PU
and now i'm stuck into this screen
here is my getvar resault if some one could help me
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 9.99.999.999
(bootloader) serialno: (removed by me because it's not important)
(bootloader) imei: (removed by me because it's not important)
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.509s

specter16 said:
hi every one
i was trying to match the RIL/basebande versions
i tried to flash some radio files and i dont know what it happend (i really forget what i did exactlly)
sudenlly i pressed the hard reset in the hboot (yes i remember i did this)
after that i tried to reflash a radio file via fastboot
i notices that in my hboot it's writen like this
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
now when i try to flash PG58IMG (radio) it says fail-PU
i thaught that i'm still s-on because that pink LOCKED which written above (even it's written s-off under it !!!!!!!!)
okay i was able to change between hboot version by just flashing the hboot zip file and that's all so i tried to do that like i was
now when i try to flash the hboot (PG58IMG) it says alsi fail-PU
and now i'm stuck into this screen
here is my getvar resault if some one could help me
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 9.99.999.999
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.509s
Click to expand...
Click to collapse
As long as you have access to the boot loader and/or fastboot, you're not bricked. You can technically flash Universal firmware and a recovery to get around this but you might want to flash an RUU as it'll boot you into a ROM and give you a working setup to play with.
Since you're S-OFF download and flash an RUU via fastboot, upgrade or downgrade; it makes very little difference as it will put you in a position to flash a recovery and or universal firmware.
A note on RIL/Basebands, 3.32 and 3.33 have no adverse effects of using a non matching RIL baseband so long as your WiFi and mobile network works, you should be good.
P.S: remove your SN & IMEI from your post
Sent from my HTC

DennisBold said:
As long as you have access to the boot loader and/or fastboot, you're not bricked. You can technically flash Universal firmware and a recovery to get around this but you might want to flash an RUU as it'll boot you into a ROM and give you a working setup to play with.
Since you're S-OFF download and flash an RUU via fastboot, upgrade or downgrade; it makes very little difference as it will put you in a position to flash a recovery and or universal firmware.
A note on RIL/Basebands, 3.32 and 3.33 have no adverse effects of using a non matching RIL baseband so long as your WiFi and mobile network works, you should be good.
P.S: remove your SN & IMEI from your post
Sent from my HTC
Click to expand...
Click to collapse
i tried an RUU and it says error 171 usb connection error !
i'm in fastboot and i can see my device connected using the fastboot devices commande
by the way this problem happed while i'm trying to get my wifi working
any way now i'm trying to get my device booting

specter16 said:
i tried an RUU and it says error 171 usb connection error !
i'm in fastboot and i can see my device connected using the fastboot devices commande
by the way this problem happed while i'm trying to get my wifi working
any way now i'm trying to get my device booting
Click to expand...
Click to collapse
I skimmed over your other thread, and you probably should have tried a kernel with BCM drivers if you haven't already.
Try with a different (and known to work) USB.
Also, make sure HTC Sync is closed and that you run the RUU as administrator.
Sent from my HTC

DennisBold said:
I skimmed over your other thread, and you probably should have tried a kernel with BCM drivers if you haven't already.
Try with a different (and known to work) USB.
Also, make sure HTC Sync is closed and that you run the RUU as administrator.
Sent from my HTC
Click to expand...
Click to collapse
i tried Sultan kernel with BCM driver and it didn't work (wifi turning on................................)
any way this is not my current prb now
one other thing
when i try this commande fastboot oem rebootRUU
here is what it says
Code:
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) emmc_erase(1852): sd_write_sector failed!
OKAY [ 0.235s]
finished. total time: 0.257s
and RUU is still not working

specter16 said:
i tried Sultan kernel with BCM driver and it didn't work (wifi turning on................................)
any way this is not my current prb now
one other thing
when i try this commande fastboot oem rebootRUU
here is what it says
Code:
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) emmc_erase(1852): sd_write_sector failed!
OKAY [ 0.235s]
finished. total time: 0.257s
and RUU is still not working
Click to expand...
Click to collapse
Format you SDCard, or make sure it's properly inserted.
Download this file and place it in your fastboot directory.
Edit: Link: http://db.tt/4UwSEM33
Then try this:
fastboot erase recovery
fastboot flash recovery recovery.img
Using your bootloader, boot into recovery
Sent from my HTC

DennisBold said:
Format you SDCard, or make sure it's properly inserted.
Download this file and place it in your fastboot directory.
Edit: Link: http://db.tt/4UwSEM33
Then try this:
fastboot erase recovery
fastboot flash recovery recovery.img
Using your bootloader, boot into recovery
Sent from my HTC
Click to expand...
Click to collapse
okay i'll try
please stay connected, i really need you

specter16 said:
okay i'll try
please stay connected, i really need you
Click to expand...
Click to collapse
Sure. If the fastboot commands work I've got something you can try.
Sent from my HTC

DennisBold said:
Format you SDCard, or make sure it's properly inserted.
Download this file and place it in your fastboot directory.
Edit: Link: http://db.tt/4UwSEM33
Then try this:
fastboot erase recovery
fastboot flash recovery recovery.img
Using your bootloader, boot into recovery
Sent from my HTC
Click to expand...
Click to collapse
not working !!!
fastboot erase recovery gives me this
Code:
erasing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.002s

specter16 said:
not working !!!
fastboot erase recovery gives me this
Code:
erasing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.002s
Click to expand...
Click to collapse
You are S-OFF?
Try:
fastboot oem unlock
Else move the universal firmware file into the folder with fastboot and type:
fastboot flash zip <zip name>.zip
Sent from my HTC

DennisBold said:
You are S-OFF?
Try:
fastboot oem unlock
Else move the universal firmware file into the folder with fastboot and type:
fastboot flash zip <zip name>.zip
Sent from my HTC
Click to expand...
Click to collapse
not working
Code:
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.006s

specter16 said:
not working
Code:
(bootloader) [ERR] Command error !!!
OKAY [ 0.006s]
finished. total time: 0.006s
Click to expand...
Click to collapse
Sorry, always getting commands mixed up.
Try:
fastboot update PG58IMG.zip
Sent from my HTC

DennisBold said:
Sorry, always getting commands mixed up.
Try:
fastboot update PG58IMG.zip
Sent from my HTC
Click to expand...
Click to collapse
archive does not contain 'boot.img'
error: update package missing boot.img
are you sure that i'm s-off my friend ??? because it's written in the hboot above with pink
*** LOCKED ***
but under this line it's written S-OFF with green

specter16 said:
archive does not contain 'boot.img'
error: update package missing boot.img
are you sure that i'm s-off my friend ??? because it's written in the hboot above with pink
*** LOCKED ***
but under this line it's written S-OFF with green
Click to expand...
Click to collapse
You're S-OFF, however your bootloader is locked. Meaning commands are locked, S-OFF disables security allowing you to flash things without being signed by HTC.
Could you try this:
fastboot erase cache
fastboot oem rebootRUU (if you get SDcard errors, take out your SDCard and try again)
fastboot flash zip PG58IMG.zip
fastboot reboot-bootloader
Sent from my HTC

DennisBold said:
You're S-OFF, however your bootloader is locked. Meaning commands are locked, S-OFF disables security allowing you to flash things without being signed by HTC.
Could you try this:
fastboot erase cache
fastboot oem rebootRUU (if you get SDcard errors, take out your SDCard and try again)
fastboot flash zip PG58IMG.zip
fastboot reboot-bootloader
Sent from my HTC
Click to expand...
Click to collapse
fastboot erase cache
Code:
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.024s
fastboot oem rebootRUU
SD card errors and the device reboot into hboot

specter16 said:
fastboot erase cache
Code:
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.024s
fastboot oem rebootRUU
SD card errors and the device reboot into hboot
Click to expand...
Click to collapse
Tried removing your SD-Card? And have you checked the SDCard still works?
Sent from my HTC

DennisBold said:
Tried removing your SD-Card? And have you checked the SDCard still works?
Sent from my HTC
Click to expand...
Click to collapse
nothing is inserted on my phone (SIM / SD)
and my sd card is working fine on my pc
omg what i did :s:s:s

specter16 said:
nothing is inserted on my phone (SIM / SD)
and my sd card is working fine on my pc
omg what i did :s:s:s
Click to expand...
Click to collapse
That's odd. Insert your SDCard after formatting it and placing the PG58IMG.zip on it. Then reboot into bootloader. See if it works, and let me know.
Sent from my HTC

Fail-PU errors generally correspond to firmware corruption
Which is pretty hard to solve
If Op can exactly tell flashing what caused this issue
Maybe we can have a chance
Btw can the phone go to recovery?
Also how did the patched hboot flash went?
Sent from my HTC Sensation 4G using xda premium

DennisBold said:
That's odd. Insert your SDCard after formatting it and placing the PG58IMG.zip on it. Then reboot into bootloader. See if it works, and let me know.
Sent from my HTC
Click to expand...
Click to collapse
- Fail-PU next to the bootloader line
i found this command
Code:
fastboot oem writesecureflag 3
i think this will return me back to s-on
but can i s-off my phone from hboot ??? if i want
or it's useless this command for me ?

[Q] Unable to boot into recovery image with fastboot help required

Hi all,
First time Iam trying to root/update my xoom tablet to CyanogenMod Android.
When I try to boot into recovery mode I get the following error: "boot command is not allowed on consumer devices, Failed to process command error (0x8)
Below are the steps I have followed to get to here.
1: Install fastboot on pc
2: Boot into fastboot and confirm I can see my device
3: Unlocked boot loader successfully with fastboot oem unlock
4: Reboot and go into fastboot and confirm I can still see my device.
5: Flash ClockworkMod Recovery with fastboot flash recovery recovery-clockwork-6.0.2.9-wingray.img
6: When I try to boot into recover with
fastboot boot recovery-clockwork-6.0.2.9-wingray.img , is when i get the error on the tablet ""boot command is not allowed on consumer devices, Failed to process command error (0x8)"
Error on PC:
c:\adbfastboot>fastboot boot recovery-clockwork-6.0.2.9-wingray.img
downloading 'boot.img'...
OKAY [ 0.676s]
booting...
FAILED (remote: (00000008))
finished. total time: 1.173s
c:\adbfastboot>fastboot getvar all
(bootloader) version-bootloader: 1049
(bootloader) product: xoom-wifi
(bootloader) secure: yes
(bootloader) model: MZ604
(bootloader) memory-info: 0x101:0x5454:0
(bootloader) mid: 001
(bootloader) version: 0.4
(bootloader) version-baseband: BP SW version not reported
(bootloader) version-baseband-2: BP SW version not reported
(bootloader) battery-status: 96%:8.383V:0.315A:34.25C
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
all: Done
finished. total time: 0.555s
Does anyone know what Iam doing wrong?

htc one sv bootloop help plz !

hi guys i have a problem the device stuck on bootloop ! i fix before an htc like that so am familiar with the steps but i need som help and files thx i will show the informations below !
**locked***
K2_UL PVT SHIP S-ON RL
HBOOT-2.21.0000
OS-3.11.61.10
eMMC-BOOT 1024MB
NOV 7 2013.15:32.31.0
so guys plz what steps and ruu i need!
regards

same problem.
exactly the same and when i do the steps from HTCDEV.com my revice it not recognized.
SOMEONE HELP US??

guys i download RUU that match with my phone but when i enter :
fastboot>fastboot oem rebootRUU
...
(bootloader) [ERR] Cmd18 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) CMD18: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(862): error 2
(bootloader) Start Verify: 3
(bootloader) [ERR] Cmd25 polling status timed out, MCI_STATUS: 0x4C0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
OKAY [ 0.155s]
finished. total time: 0.156s
help thanks

benben85 said:
guys i download RUU that match with my phone but when i enter :
fastboot>fastboot oem rebootRUU
...
(bootloader) [ERR] Cmd18 polling status timed out, MCI_STATUS: 0x4C2000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) CMD18: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(862): error 2
(bootloader) Start Verify: 3
(bootloader) [ERR] Cmd25 polling status timed out, MCI_STATUS: 0x4C0000
(bootloader) [ERR] sdcc_command: sdcc_poll_status error, rc: 2
OKAY [ 0.155s]
finished. total time: 0.156s
help thanks
Click to expand...
Click to collapse
fastboot flash recovery recovery.img
sending 'recovery' (5954 KB)...
OKAY [ 0.815s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.519s
everything is failed even to install recovery
?

As long as you are S-on, you can't flash recovery.
What file ending of the ruu you have, zip or exe?

old.splatterhand said:
As long as you are S-on, you can't flash recovery.
What file ending of the ruu you have, zip or exe?
Click to expand...
Click to collapse
i have this on .exe : RUU_K2_CL_JB422_SENSE50_MR_Sprint_WWE_Boost_3.05.653.4_R_Radio_1.12.50.0516_10.30.42.25_NV_NV_Boost_2.20_150_release_389346_signed
but i think is not what i need and the other is zip file : PL80IMG_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1_Radio__1.18.40a.00.05_10.81a.40.23L_release_338297_signed
so whats the solution please !

benben85 said:
i have this on .exe : RUU_K2_CL_JB422_SENSE50_MR_Sprint_WWE_Boost_3.05.653.4_R_Radio_1.12.50.0516_10.30.42.25_NV_NV_Boost_2.20_150_release_389346_signed
but i think is not what i need and the other is zip file : PL80IMG_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1_Radio__1.18.40a.00.05_10.81a.40.23L_release_338297_signed
so whats the solution please !
Click to expand...
Click to collapse
Both files are are not for your phone and won't flash. You need a Ruu for software number 3.11.61.10.

old.splatterhand said:
Both files are are not for your phone and won't flash. You need a Ruu for software number 3.11.61.10.
Click to expand...
Click to collapse
ok do you have one ruu that match with my phone !

benben85 said:
ok do you have one ruu that match with my phone !
Click to expand...
Click to collapse
i found this is a encrypted zip L80IMG_K2_UL_JB422_SENSE50_MR_Orange_UK_3.11.61.10_Radio_1.18.40a.00.05_10.81a.40.23_release_340236_signed
but when i type fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) SD: write failed in CMD25.
OKAY [ 1.198s]
finished. total time: 1.198s
and i dont get it into black htc screen is stuck on logo with white background !
help plz

benben85 said:
i found this is a encrypted zip L80IMG_K2_UL_JB422_SENSE50_MR_Orange_UK_3.11.61.10_Radio_1.18.40a.00.05_10.81a.40.23_release_340236_signed
but when i type fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) SD: write failed in CMD25.
OKAY [ 1.198s]
finished. total time: 1.198s
and i dont get it into black htc screen is stuck on logo with white background !
help plz
Click to expand...
Click to collapse
I don't have a Ruu for your phone, but the one you have could work.
Rename the zip file to PL80IMG.zip (make sure it is not named PL80IMG.zip.zip) and copy it in the external sdcard. Boot into the bootloader and let the phone recognize the zip. Confirm to update with vol+ and let it run until its finished.

old.splatterhand said:
I don't have a Ruu for your phone, but the one you have could work.
Rename the zip file to PL80IMG.zip (make sure it is not named PL80IMG.zip.zip) and copy it in the external sdcard. Boot into the bootloader and let the phone recognize the zip. Confirm to update with vol+ and let it run until its finished.
Click to expand...
Click to collapse
i renamed like you said the file but when i upgrading all the steps said 'FAIL-Pu'
eexcept [9] TP -OK
[10]SBL1 -bypass-s
[11] sbl1 -bypass -s
update fail in the end
what i can do

benben85 said:
i renamed like you said the file but when i upgrading all the steps said 'FAIL-Pu'
eexcept [9] TP -OK
[10]SBL1 -bypass-s
[11] sbl1 -bypass -s
update fail in the end
what i can do
Click to expand...
Click to collapse
I don't know. Maybe a bad download, not a full Ruu or something else.
You can try to unlock the bootloader with htcdev.com, flash twrp recovery and a rom.

old.splatterhand said:
I don't know. Maybe a bad download, not a full Ruu or something else.
You can try to unlock the bootloader with htcdev.com, flash twrp recovery and a rom.
Click to expand...
Click to collapse
i try to unlock the bootloader but its failed also ! it can be a bad emmc ?

Then i would say, you are out of luck and you should take a look for another phone.

Weird Problem Unlocking Bootloader XT1040

Hi Everyone,
Today I decided to install a custom ROM to my XT1040. First thing to do: unlock bootloader. Did the process as found everywhere on internet.
1 st - get code to unlock
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 3A95230335138752#30343333323333
(bootloader) 35343100585431303430000000#C78A
(bootloader) 36BBC4771BF5FE7775DDBECCA29FC09
(bootloader) 14D8F#8CD6AE0515000000000000000
(bootloader) 0000000
OKAY [ 0.172s]
finished. total time: 0.187s
2nd - I've entered the code on Motorola's website and got the answer:
Here is the unique code to unlock the bootloader of your Motorola phone.
Unlock Code: BSJ3KYEQY6FDEBJ5B5MF
Please follow the instructions here to unlock your bootloader.
Good Luck!
3rd - Entered unlocking code on mobile
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock BSJ3KYEQY6FDEBJ5B5MF
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Unlock code = BSJ3KYEQY6FDEBJ5B5MF
(bootloader) Unlock completed! Wait to reboot
FAILED (status read failed (Too many links))
finished. total time: 19.400s
On the phone shows Unlocking... and then Unlocked!
But, after it restarts, it shows:
AP Fastboot Flash Mode (S)
41.16(*) (sha-412cf0b, 2014-09-26 12:39:48)
CPU: MSM8926
eMMC: 8GB Samsung RV=06 PV=02 TY=17
DRAM: 1024MB Elpida S4 SDRAM DIE=4GB
Battery OK (Charging)
Device is LOCKED. Status Code:0
Transfer Mode: USB Connected
This phone was booting properly. After my first trial, it stoped. So, I've tried to boot a few Stock Roms, but nothing.....
Any clues?
Thanks in advance