I accidentally installed a cyanogenmod zip without wiping the cache partition first, right now I am still on cwm recovery. I HAVE already wiped the data.
Should I wipe it now? Should I wipe data and then restart the process?
Any help would be appreciated.
You should be alright, the /cache partition on this phone doesn't hold too much important stuff. Just to be safe, reflash the CM zip, and wipe the cache and data. You will lose all of your apps and settings, but not wiping data usually causes problems when flashing different ROMs.
Related
Hi guys.Now it seems i am stuck here.As the title says i can't flash a rom completly..because of me or because of the recovery idk....
What i do to flash a rom?Simple:Click on Wipe 'em all then i flash the rom i want.Every install ends too quickly.So when i click info (to check all my partitions everything is untouched but system has more than 260 mb free.I don't want to revert to stock so pls help me.
P.S. I have 4 ext recovery touch (latest) and a ext4 filesystem.
I had to read this a couple of times to try and understand,
however,
If in the event that a rom isn't flashing correctly, then its assumed that you aren't formatting or wiping the phone/device correctly.
I use clockworkmod recovery, however formatting these things on a clean new installs works for me every time.
Wipe data factory reset
wipe dalvik cache
wipe data
wipe cache
If you do not wipe these things you will effectively be flashing over the top of an existing rom.
For instance you wouldn't re-install Windows without formatting the drive. Its the same principle.
I hope that helps in some way.
try in this way http://forum.xda-developers.com/showthread.php?t=1257731.
what rom do you want to flash?
Hey guys, this might be a really noob question. I looked it up on google, but still wanted to make sure because of the verizon locked bootloader etc( i know we can unlock it now). How do i do a full wipe on my device? I am asking because there are a few more options in the wipe settings of the custom recovery i have.
This are the steps i always do before flashing a rom. Are they the correct steps or do i need to do something else?
Wipe Cache
Wipe Dalvik-Cache
Wipe Data/factory reset
dimeloklk said:
Hey guys, this might be a really noob question. I looked it up on google, but still wanted to make sure because of the verizon locked bootloader etc( i know we can unlock it now). How do i do a full wipe on my device? I am asking because there are a few more options in the wipe settings of the custom recovery i have.
This are the steps i always do before flashing a rom. Are they the correct steps or do i need to do something else?
Wipe Cache
Wipe Dalvik-Cache
Wipe Data/factory reset
Click to expand...
Click to collapse
Wipe Cache and wipe dalvik cache should both be done when flashing modifications or tweaks as they reduce the chance of encountering data issues/glitches and neither of them wipe your data as they are merely caches. Wipe data/factory reset should be done before flashing a rom. Wipe data/factory reset automatically wipes the cache and as the name implies will wipe any data you have on the phone, though any files you have saved to your internal "sd card" will be left intact. Before flashing a rom I always do a factory reset, and a dalvik cache wipe. Additionally I have found it helpful to also go into mounts and format system. There have been times for me that switching between two different roms has led to choppy performance, and this step seems to fix that as it thoroughly removes any traces of the previous rom.
Thanks for the detail reply. Is useful to know this since i always flash roms
OneNutShort said:
Wipe Cache and wipe dalvik cache should both be done when flashing modifications or tweaks as they reduce the chance of encountering data issues/glitches and neither of them wipe your data as they are merely caches. Wipe data/factory reset should be done before flashing a rom. Wipe data/factory reset automatically wipes the cache and as the name implies will wipe any data you have on the phone, though any files you have saved to your internal "sd card" will be left intact. Before flashing a rom I always do a factory reset, and a dalvik cache wipe. Additionally I have found it helpful to also go into mounts and format system. There have been times for me that switching between two different roms has led to choppy performance, and this step seems to fix that as it thoroughly removes any traces of the previous rom.
Click to expand...
Click to collapse
this is what I've always been taught to do as well.
sent from my unlocked bootloader Verizon Samsung galaxy s III
maybe you can get a dev to make a wipe zip
What is considered a full wipe in TWRP? Do I wipe cache, dalvik, & factory reset? Do I also need to format system?
Cache, dalvik, and factory reset is good. System should automatically be wiped when flashing the new ROM. But you can wipe system yourself, won't hurt. Always have a backup, too, JIC.
Sent from my
I installed cm12.1 rom for my samsung galaxy note 8 gt-n5110 and after i turned it on this was what happened. It constantly showed text boxes like "unfortunately, google app has stopped" and after i closed it another one showed up and now i cant control it anymore! I cant even finish the setup! What can i do?
Im new to these firmware stuff btw.
sunglassesman said:
I installed cm12.1 rom for my samsung galaxy note 8 gt-n5110 and after i turned it on this was what happened. It constantly showed text boxes like "unfortunately, google app has stopped" and after i closed it another one showed up and now i cant control it anymore! I cant even finish the setup! What can i do?
Im new to these firmware stuff btw.
Click to expand...
Click to collapse
Try a smaller Gapps package than the one that you flashed with the ROM. The package you used is probably too large to fit in the system partition along with the ROM.
Or, you didn't factory reset, wipe cache and wipe dalvik cache when you flashed the ROM. Failing to do those wipes will cause bugs due to the new system conflicting with the saved system data/settings from the previous system. In other words, data left over from the old ROM is causing problems with the new ROM.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Try a smaller Gapps package than the one that you flashed with the ROM. The package you used is probably too large to fit in the system partition along with the ROM.
Or, you didn't factory reset, wipe cache and wipe dalvik cache when you flashed the ROM. Failing to do those wipes will cause bugs due to the new system conflicting with the saved system data/settings from the previous system. In other words, data left over from the old ROM is causing problems with the new ROM.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Hey thanks for replying but it seems like i cant even finish the setup. Therefore i cant load any files into my device. Any suggestions?
sunglassesman said:
Hey thanks for replying but it seems like i cant even finish the setup. Therefore i cant load any files into my device. Any suggestions?
Click to expand...
Click to collapse
Boot back into recovery, then factory reset, wipe cache and wipe dalvik cache, then reboot.
If that doesn't work, try booting back into recovery then flash the ROM then the Gapps then factory reset, wipe cache and wipe dalvik cache then reboot.
If that doesn't work, try booting back into recovery, then select the "Wipe" option, then choose the "advanced wipes" option, then choose the system partition, then swipe the slider at the bottom to run the wipe, then try flashing just the ROM but don't flash the Gapps, factory reset, wipe cache and wipe dalvik cache then reboot. After you get the device booted, you can delete the Gapps file then download a smaller package and put it in your phone's internal storage then boot back into recovery and select the "Install" option, at this point, you already have the ROM installed so no need to flash it again, but you do need to flash the new Gapps file, then factory reset, wipe cache and wipe dalvik cache.
Do you see how important it is to factory reset, wipe cache and wipe dalvik cache every time you flash? It is a vital step.
Sent from my SM-S767VL using Tapatalk
Hey thanks for all these but my device is using cwm right now so can you pls rewrite the instructions for me?
Also i cant finish the setup with all these popups so theres no way i can load files into it.
And yeah i guess i didnt wipe data or caches away after i finished flashing the files.
Thank you so much.
Hi guys,
I wanted to perform a factory reset without loosing the stock ROM for now.
I don't do this since a long time ago (I did that on M7) I just wanted to ask a confirmation about that on TWRP Recovery.
What I need to do? Is WIPE -> Advanced Wipe and select DATA, Internal Storage, Cache and Dalvik Cache enough?
Basically I can wipe everything except system and boot right?
I've read something about formatting partitions but I'm not sure.
EDIT: I've found this: TWRP --> WIPE --> Swipe to Factory Reset
No more else should be needed.