[Completed] Need Help With Bricked SGH-I337 - XDA Assist

So recently, I update my SGH-I337 via OTA and i started having call issues where I would keep having to restart the phone in order to make the phone calls work again. I then decided to root my phone in order to get the calls to work again and they did. I then decided that since my phone was now rooted, I would completely get rid of KNOX using Root Explorer. Doing this soft bricked my phone after a reboot. After some research, I found this post http://forum.xda-developers.com/showthread.php?t=2663545 and i got my phone working again using steps 1-7. I then took it a step further and used Odin3 v1.85 and flashed the JFLTE_USA_ATT_16G.pit file with ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 file and that in term bricked my phone again. So I repeated steps 1-7 again but wound up with a bootloop at the AT&T logo and now have no clue what to do. I have been at this for 3 days now so any assistance would be wonderful. Thanks.
EDIT: Got it fixed....removed battery and rebooted into recovery and performed a factory reset. it stayed at the AT&T logo screen for a couple minutes before it booted up.

Glad you were able to fix it on your own. Great job!
Thread closed

Related

Help with a broken phone (lost IMEI + story)

Hey all, so today my CM10 Galaxy S3 ran out of battery and when I turned it on my IMEI was set to 0; I wasn't too worried as I had made a backup and I attempted to restore it using the method here: http://forum.xda-developers.com/showthread.php?t=1791291
However, that did not work and I saw that many people had only had it worked using a stock rooted phone so I attempted to Odin my phone back to stock using the method here: http://forum.xda-developers.com/showthread.php?t=1762709
Odin was successful but when I booted the phone was stuck at the Verizon 4G LTE pulsing loading screen (not frozen, continuously playing the animation) and nothing happened for about 10 minutes; I tried a battery pull and it was stuck again. Any ideas as to what I should do next?
Edit: For all having a similar problem: Factory reset through recovery and it booted up just fine, did restore IMEI using the method here: http://forum.xda-developers.com/showthread.php?t=1801997 but I am still having persistent roaming issues. The dev is great and is currently figuring out how to fix the roaming issue =D
I'm no expert but you can try to flash again your phone to stock root and then try this method
http://forum.xda-developers.com/showthread.php?p=29462348
Good luck
Sent from my SCH-I535 using xda premium

[SOLVED] Rogers I727R stuck on bootanimation

Sorry everyone... I tried one more time (my 5th attempt!) and it worked this time! I have no idea what happened with the earlier attempts. Thanks
Hello everyone. I'm having a problem with a Rogers Skyrocket here and hope someone can help. It was running a custom ROM, but I was given the task of returning it to stock. I don't recall which ROM was on it, but it worked nicely. I should have just kept it that way!
Thanks to vincom's super helpful posts, I got the info & file(s) needed to get this thing back to stock. I installed Odin 1.85, and extracted
I727RUXLF3_I727RRWCLF3_I727RUXLF3_HOME.tar.md5
from the zip. I started by doing a wipe/factory reset (from inside the custom rom) first, and rebooted to see that it showed the initial setup screen. Then pulled battery and booted the phone into ODIN mode. I made sure to kill Kies completely before connecting the phone to my laptop (WinXP). Then launched Odin, hit the PDA button, loaded up the above file, left the check-boxes as they were, and flashed. It was successful, and rebooted the phone.
The rogers logo appears, and the samsung galaxy bootanimation comes up, and it continues to animate.... forever (for the record, I waited 20 minutes, more than enough time). I can pull the battery and try to boot again but it still stays on the bootanimation. I'm not sure what else to do? I can still get into stock recovery or Odin mode. Can anyone help? Thanks

[Q] Bricked/Boot Loop Galaxy Note 10.1!!

Hello fellow XDA members! I am a Noob.
So I believe I have a Bricked Galaxy Note 10.1. Model GT-N8013
I Rooted Stock ROM, and flashed Collective Edition 5 Dark Side.
So heres what happened, everything seemed fine, until I made a mistake, I was Pimping my ROM with the PimpMyRom app. Every change seemed fine and my note worked, but when i saw the double boot screen slide in the app, i did what it said, i have the imf support or something like that. Then after i had the ''support'' needed, i clicked install button on the double boot slide, it seemed to do something and requested nothing, so i went ahead chose a second clip, and clicked set as second boot screen. It said it wont take effect until the 3rd boot, so i rebooted 3x, but at the third time, it was stuck at the boot screen with the galaxy note 10.1 logo ! It did not start or did anything, over time it would turn off and automatically reboot, but it would get stuck again !.
To attempt to fix it, I Booted into recovery (CWM) and did everything i could. I wiped nearly all cache, factory reseted, then out of fear, i flashed the stock firmware ROM from Sammobile website, with ODIN, and to my knowledge, it got worse!! It booted, seemed to do something then in the logo screen it got stuck once again!! Stock recovery says unable to mount /efs, i don't believe EFS is completely corrupted, I left it stuck for awhile and it shut down in like an hour. Help, what can i do to fix this!?!?!?!
Device cannot boot up.
I could boot into recovery and download mode only.
I thought that I too had bricked my 8013 the past weekend. Trying to do something that I shouldn't. It took me a bit of work and a lot of worry (my wife gave me my 8013 for Xmas and if I had to tell her that it was now a doorstop, she would have killed me). I used this method to get back to stock and then was able to work my way back to the ROM I use. I disremember in which order I Odin'd things, but in the end was able to un-brick. All I can say is give it a shot.
jusliloleme said:
I thought that I too had bricked my 8013 the past weekend. Trying to do something that I shouldn't. It took me a bit of work and a lot of worry (my wife gave me my 8013 for Xmas and if I had to tell her that it was now a doorstop, she would have killed me). I used this method to get back to stock and then was able to work my way back to the ROM I use. I disremember in which order I Odin'd things, but in the end was able to un-brick. All I can say is give it a shot.
Click to expand...
Click to collapse
i did what u said...but all i got is i able to get through the logo but without seeing anything only able to hear the sound. any other tip? i got the same problem as above.

[Q] Galaxy S2 Soft Bricked after root....

Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
addamT989 said:
Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
Click to expand...
Click to collapse
Try flash a stock firmware by using flashtool, it will work 100%:angel:
revernwe therefore
addamT989 said:
Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
Click to expand...
Click to collapse
hi,
can 'be that your device has some residual old. Do as you have advised. install a stock rom and firmware, so it becomes a new cell phone. After odin starts TWRP (much better) and root.
I would flash a complete bone stock Rom using Odin and start over. Also rom manager was highly discouraged on the AT&T version of the s2 so I don't know what the stance is on T-Mobile's version
Sent from my CLEAN Note ll
brandonarev said:
I would flash a complete bone stock Rom using Odin and start over. Also rom manager was highly discouraged on the AT&T version of the s2 so I don't know what the stance is on T-Mobile's version
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Thanks for the advice! Should i flash it back to ICS then try to root again via Odin before i upgrade back to JB? I'm guessing there's something that isn't getting wiped. Since i can run CWM and Root with Odin without a hitch. it's the initial reboot after all that is done that I go into the boot loop.
tainiun rioters
pierm said:
hi,
can 'be that your device has some residual old. Do as you have advised. install a stock rom and firmware, so it becomes a new cell phone. After odin starts TWRP (much better) and root.
Click to expand...
Click to collapse
Sorry for my ignorrance, what exactly is TWRP, and is it now on there because i used Odin and it installed it automaticly? And do i want to use this vice CWM?
One more question...before i try all this, can i backup everything on Kies just like i would be able to with CWM and reinstall if my root fails again? I've only used Kies for firmware upgrade, never to reinstall a backed up copy of my phone.
Thanks!
addamT989 said:
Sorry for my ignorrance, what exactly is TWRP, and is it now on there because i used Odin and it installed it automaticly? And do i want to use this vice CWM?
Click to expand...
Click to collapse
addamT989 said:
One more question...before i try all this, can i backup everything on Kies just like i would be able to with CWM and reinstall if my root fails again? I've only used Kies for firmware upgrade, never to reinstall a backed up copy of my phone.
Thanks!
Click to expand...
Click to collapse
Hi
TWRP and the 'one touch recovery, better than CWM.
The backup kies can not recover from CWM
steps:
install odin, after recovery, nandroid backup, ROM, and root.
hi
Flash the stock firmware using odin!!..it will work!
Sent from my GT-N7100 using xda premium
freezes then booted
Hello I have this problem with my galaxy s2 i9100. After reboot the phone wasn't booting something like "boot loop" so I re flashed the firmware and now the phone boots up but after the boot it freezes immediately. So I decided to install clock work mod recovery and install cyanogen mode 11 with cyanogen mode the phone boots up and are able to be used again until the screen goes to sleep mode or the power button is pressed then the screen goes black and doesn't turn on after long pressing the power button it reboots. So I don't know what else to do I have tried kernels, operating systems re flashing reseting and nothing helps. No need to tel me to do resettings. Also my galaxy s2 i9100 chip has insane chip bug but I don't know if it has to do something with my problem.

Samsung Galaxy S6 (sprint variant) failed firmware flash FAC LOCK

Let me start by addressing I know this isn't the sprint thread but there's a lot more development here which equals more help. Plus this issue seems to be able to happen to any variant.
Second, this isn't my device I'm trying to see if it can be fixed for a friend. I'm not that familiar with Samsung devices but I have been able to get them working in the past via Odin or kies but this time I need some help.
So this is what's going on, my friend recently rooted his S6(SM-920P) not sure which method he used (don't think it matters at this stage) and was on stock rom (LP5.0.2) with xposed framework installed. He hadn't changed the kernel AFAIK oh but I did install TWRP for him and everything was working. Long story short he woke up a couple days ago to his phone being unable to turn back on. I told him how to get to download mode and I asked him what did it say on the top left corner it said something like "system binary not SEandroid locked" underneath that it said fac lock
So I had him give me the phone thinking somehow it did a OTA update while he was asleep or something either way I was confident using Odin to flash the firmware would solve the issue. Had the firmware finished flashing I'm confident it would have but halfway through Odin simply froze on installing system. I figured its just gonna take a while 45 mins later it was still stuck at the same spot.
Not really thinking about it I figured I will just reboot the phone back into download mode restart the process it should be fine. Not a good idea. Now all I get is a green screen saying to access the smart switch emergency recovery system. But it gets better.
My computer isn't recognizing the device now. I installed smart switch software and it's not recognizing it. I even installed Kies and it's not recognizing either.
Is his phone toast or what? I tried emergency system recovery but I need the S/N of his phone to possibly get this thing working again, but it boot into anything anymore except the screen that says Samsung switch...
PLEASE HELP ME if it's bricked it's bricked I get that but if there's a way to figure out what to do I'm all ears. Thanks in advance

Categories

Resources