Database Info

How do we flash just the baseband?

I haven't seen any releases of baesband packages.

There is no current method to flash just the baseband that I know of. Assuming you want the newest KK1, the method you can use is to flash back to stock, do the official OTA update from AT&T, and then flash the rom you want and the KK1 modem will remain.
This should work with all of the roms listed here--none of them have the modem packaged in it that I know of (and I think I've tried them all...)

Actually, there is Tested and working fine! I have meant to release a CWM updater for this method (it's sitting on my linux partition - but it needs more widespread testing.)
Here is the manual method:
grab the odin.tar containing radio you want
grab amss.bin and mdm.bin from it
adb push them to your /sdcard/
boot into CWM
use the menu to mount /emmc
connect in adb shell
type the following:
dd if=/dev/block/mmcblk0p13 of=/emmc/mmcblk0p13.bin
dd if=/dev/block/mmcblk0p17 of=/emmc/mmcblk0p17.bin
(this gives you a backup of your /system/etc/firmware/misc and /system/etc/firmware/misc_mdm which constitute the modem)
dd if=/emmc/amss.bin of=/dev/block/mmcblk0p13
dd if=/emmc/mdm.bin of=/dev/block/mmcblk0p17
(done, you are now on the new modem firmware)
as a sanity check you can attempt to mount the partition to verify it flashed correctly, unmount and dd your backup if it did not)

PM me a link and I'll test it for you.

Da_G said:
Actually, there is Tested and working fine! I have meant to release a CWM updater for this method (it's sitting on my linux partition - but it needs more widespread testing.)
Here is the manual method:
grab the odin.tar containing radio you want
grab amss.bin and mdm.bin from it
adb push them to your /sdcard/
boot into CWM
use the menu to mount /emmc
connect in adb shell
type the following:
dd if=/dev/block/mmcblk0p13 of=/emmc/mmcblk0p13.bin
dd if=/dev/block/mmcblk0p17 of=/emmc/mmcblk0p17.bin
(this gives you a backup of your /system/etc/firmware/misc and /system/etc/firmware/misc_mdm which constitute the modem)
dd if=/emmc/amss.bin of=/dev/block/mmcblk0p13
dd if=/emmc/mdm.bin of=/dev/block/mmcblk0p17
(done, you are now on the new modem firmware)
as a sanity check you can attempt to mount the partition to verify it flashed correctly, unmount and dd your backup if it did not)
Click to expand...
Click to collapse
Cool...Sorry to be naive here, what if you have a CWM zip, how do you extract the mdm.bin and amss.bin? If someone can post the KK1 equivalent of those two (if they are on 2.3.6), I can probably create a CWM package using above instructions.

[RECOVERY]ZTE V11A/V71A HC3.2 - CWM recovery

So guys.
Here is my humble CWM recovery, tested on 7 inch. Nandroid backup seems to work and flashing also. External SD card is used for reading.
Mounting of card to USB is not working yet.
Colors are now really fixed, including refresh.
Select is also now fixed and short press is working.
I am not responsible if you make some bricks to build yourself a new house. Anyhow chances of bricking are quite low, worst case is that your recovery will not boot and that's it.
I suggest that you make backup of your recovery partition before you start with dd or whatever so that you can flash it back in case something is not ok.
To flash:
Code:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
and
Code:
adb reboot recovery
to get to recovery
In the archive is my /device folder if someone wants to play some more.
I got the CM9 ICS booting into Launcher!!!

One more in for future needs.

Great to have mate, thanks a lot for your work.

I'll tell these guys you have a working version for rhe 7",
http://forum.xda-developers.com/showthread.php?t=1473555
How can I backup? what do i have to type?
Thanks for your work!

You can make backup for example like this and if something fails you can flash it back directly in fastboot.
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18

jakaka said:
You can make backup for example like this and if something fails you can flash it back directly in fastboot.
Code:
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
Click to expand...
Click to collapse
That will actually write img's to the partitions.
Backup is done this way
Code:
dd if=/dev/block/mmcblk0p8 of=/sdcard/boot_backup.img
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery_backup.img
jakaka you have sources now on utkanos git. You can contact him if you need any help to make backup to internal sdcard work.

mobilx said:
That will actually write img's to the partitions.
Backup is done this way
Code:
dd if=/dev/block/mmcblk0p8 of=/sdcard/boot_backup.img
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery_backup.img
jakaka you have sources now on utkanos git. You can contact him if you need any help to make backup to internal sdcard work.
Click to expand...
Click to collapse
Sorry you are right with the backup, I wasn't looking.

mobilx said:
That will actually write img's to the partitions.
Backup is done this way
Code:
dd if=/dev/block/mmcblk0p8 of=/sdcard/boot_backup.img
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery_backup.img
jakaka you have sources now on utkanos git. You can contact him if you need any help to make backup to internal sdcard work.
Click to expand...
Click to collapse
Thanks!
Any progress on CM9?
Technically speaking You could probably contact MR Green from Cyanogen, He is in charge of the hp touchpad Which has the same qualcomm and adreno Chipset . Just an idea

Hi, I'm following your guide and the one in http://forum.xda-developers.com/showthread.php?t=1473555&page=1, but I seem to be stuck in the installation of CWM.
I succeded in rooting the Vodafone Smart Tab 10, as busybox tells so.
Then I issued this command:
C:\Users\...\android>fastboot flash recovery v10_cwmrecovery.img
sending 'recovery' (6214 KB)... OKAY
writing 'recovery'... OKAY
Rebooting the tablet in recovery mode always gets me to the Android System Recovery <3e>: wasn't I supposed to be shown the clockworkmod recovery system? If so, what am I doing wrong?
I also tried with Utkanos' v11a version, but with the same result...
Thanks to anyone who will help me
Bye
Marco
[SOLVED] I solved using the software downloaded from http://wwwen.zte.com.cn/endata/mobile/Italy/, as suggested here http://forum.xda-developers.com/showthread.php?t=1473555&page=59. Moreover, in that same thread (some days around the ones in page 59... ) I found a suggestion about removing some system files to avoid the loading of the stock kernel. I didn't do that, but in case anyone needs it, that could be another solution

[Q] deleting a recovery

hello guys
I want to delete cwm (v6.0.1.9) to install twrp (v2.5.0.0).can anyone help me?
how i can delete CWM?

nasiroddin said:
hello guys
I want to delete cwm (v6.0.1.9) to install twrp (v2.5.0.0).can anyone help me?
how i can delete CWM?
Click to expand...
Click to collapse
Whoa! You don't delete a recovery Just install TWRP and it will overwrite CWM.
Follow the instructions in the TWRP thread using goomanager or download the CORRECT version for your device form the teamwin web site and use the following from a PC
rename the downloaded file to twrp.blob and reboot to the bootloader / fastboot screen
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
fastboot -i 0x0B05 reboot
or from a terminal emulator on the device:
Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
Code:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.

sbdags said:
Whoa! You don't delete a recovery Just install TWRP and it will overwrite CWM.
Follow the instructions in the TWRP thread using goomanager or download the CORRECT version for your device form the teamwin web site and use the following from a PC
rename the downloaded file to twrp.blob and reboot to the bootloader / fastboot screen
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
fastboot -i 0x0B05 reboot
or from a terminal emulator on the device:
Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
Code:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.
Click to expand...
Click to collapse
thanks
now I install twrp and i want to update from jb 4.1 to jb 4.2 and i downloaded jb 4.2 frimware (WW_epad-user-10.6.1.14.8) from asus global site.can you help me how to update my tablet to this version?(my tablet is unlocked so suggest me a way that doesn't cause a (hard or soft) brick) thanks a lot

nasiroddin said:
thanks
now I install twrp and i want to update from jb 4.1 to jb 4.2 and i downloaded jb 4.2 frimware (WW_epad-user-10.6.1.14.8) from asus global site.can you help me how to update my tablet to this version?(my tablet is unlocked so suggest me a way that doesn't cause a (hard or soft) brick) thanks a lot
Click to expand...
Click to collapse
You can just flash the update file from TWRP. You will loose your custom recovery and root if you flash the stock rom. So you would have to re-install TWRP and root again.
If you come from any kind of custom rom it's highly recommended to do a clean install of the stock rom. Wipe everything, don't restore apps from a backup (their data should be ok to restore), install all your apps from the Play Store.
Sent from my DROID4 using Tapatalk 2

[HOWTO] Unlocking i9505G bootloader

This will Wipe every thing on the internal storage SO BACKUP your stuff on the SD card and maybe the onto computer too
This is for the Google edition of the Galaxy S4
Go To setting / about phone /
Tap "Build Number" 7 times
Go back to Main Settings Menu and under now shown "Developer Options" enable "USB debugging"
Download this
http://developer.android.com/sdk/index.html#download
extract to the C drive in the folder adb (you can move it anywhere just adjust the path)
run "SDK Manager.exe"
in the extras select "Google USB Drivers"
click "Install 1 package" and accept license / Install
now go into the device manager on you PC and change the "Samsung ADB driver" to the
"Android Composite ADB Interface" located in this folder
C:\adb\sdk\extras\google\usb_driver
you will have to force that driver to install by selecting it
let it finish installing the drivers
then
unplug and then plug in the USB on the phone
your phone will ask you about "Allow USB debugging?"
check the box "always allow from this computer"
click OK on your phone
If this doesn't work the some thing is wrong with the drivers and reinstall the drivers make sure you select "Android Composite ADB Interface" and not "Android ADB Interface"
Now open up a command prompt (I did this as "run as administrator")
type "cd C:\adb\sdk\platform-tools" (or what ever the directory you extract your files)
enter this command
adb reboot bootloader <enter>
Once in bootloader,
In the command prompt type:
fastboot oem unlock <enter>
It will ask you to unlock you phone and this may void you warranty
Use the volume buttons to change to yes and the power button as enter
At this point everything gets wiped on your phone
The phone rebooted back into bootloader and it now said "bootloader=unlocked" and the bottom left of the screen
Reboot the phone and the unlock icon will appear on the 1st Google screen.
the phone will boot into android like it was new
I have not done any ODIN on my phone so i don't know how this affect it
I am trying to avoid ODIN and get the phone rooted and have a custom recovery on it.
I just did this on my phone and typed this up i think everything is accurate let me know if i need to adjust anything.
fyi the command "fastboot flash recovery recovery.img" don't work because the system is still secure boot enable.

Thanks and Questions
Thanks. Could you please tell where you found this info?
Also, I'm not that experienced and don't understand why this is necessary. Don't our GT-i9505G phones come with unlocked boot loader?

bsam55 said:
Thanks. Could you please tell where you found this info?
Also, I'm not that experienced and don't understand why this is necessary. Don't our GT-i9505G phones come with unlocked boot loader?
Click to expand...
Click to collapse
It still needs to perform fastboot oem unlock just like nexus device does
Sent using GT-i9505~

This is what i did on my galaxy nexus device (nexus 3) and my friend nexus one
I made this from my notes of the old devices
my experience is that i could mess up my phone and lock me out of it it, so i wanted to be sure i could fix it, that is why i did this
I did not try to use fastboot beforehand, so it could work.
but i have a feeling that the ODIN flash changed the bootloader (probably not)
but i have been screwed buy a odin flash messing with the bootloader on the vibrant( but for some reason there looked to be 3 bootloader on that device)
if some one want to try it
just put the ClockworkMod 6.0.3.3 recovery file the
C:\adb\sdk\platform-tools
adb reboot bootloader
fastboot boot recovery.img
this dose take 1 minute after the file is sent to reboot and load
I have tried TWRP but it don't load past the first screen.
This just boots into the file and doesn't change anything
access to the sd cards don't work
I am tempted to flash ClockworkMod but i would like to pull a copy of the recovery first.
BTW after paying $700 for a phone i want to be sure to be able to reinstall the OS, like on a PC.

warwolfx0 said:
This is what i did on my galaxy nexus device (nexus 3) and my friend nexus one
I made this from my notes of the old devices
my experience is that i could mess up my phone and lock me out of it it, so i wanted to be sure i could fix it, that is why i did this
I did not try to use fastboot beforehand, so it could work.
but i have a feeling that the ODIN flash changed the bootloader (probably not)
but i have been screwed buy a odin flash messing with the bootloader on the vibrant( but for some reason there looked to be 3 bootloader on that device)
if some one want to try it
just put the ClockworkMod 6.0.3.3 recovery file the
C:\adb\sdk\platform-tools
adb reboot bootloader
fastboot boot recovery.img
this dose take 1 minute after the file is sent to reboot and load
I have tried TWRP but it don't load past the first screen.
This just boots into the file and doesn't change anything
access to the sd cards don't work
I am tempted to flash ClockworkMod but i would like to pull a copy of the recovery first.
BTW after paying $700 for a phone i want to be sure to be able to reinstall the OS, like on a PC.
Click to expand...
Click to collapse
Maybe you can do a full dump for the community.

before you install custom recovery, I'd like to ask if you could do complete system dump of your device, including stock recovery (recovery.img), stock bootloader (boot.img) and system.img . It would be a big help to the community. You can do it simple after rooting with for example Motochopper exploit (described here http://whatswithtech.com/how-to-root-samsung-galaxy-s4/ )
Then something like this:
Code:
for gaining root access type: su
then:
copy BOOT -> dd if=/dev/block/mmcblk0p20 of=/sdcard/boot.img bs=4096
copy HIDDEN -> dd if=/dev/block/mmcblk0p27 of=/sdcard/hidden.img bs=4096
copy PARAM -> dd if=/dev/block/mmcblk0p19 of=/sdcard/param.bin bs=4096
copy RECOVERY -> dd if=/dev/block/mmcblk0p21 of=/sdcard/recovery.img bs=4096
copy SYSTEM -> dd if=/dev/block/mmcblk0p16 of=/sdcard/system.img bs=4096
Thanks a lot!

System Dump
Plus One on the system dump. There are a lot of knowledgeable people waiting to help as soon as they have this. I don't know enough to do it and did try CWM (which doesn't work, by the way.)
Hope you are able to help. Thanks

bmbm said:
before you install custom recovery, I'd like to ask if you could do complete system dump of your device, including stock recovery (recovery.img), stock bootloader (boot.img) and system.img . It would be a big help to the community. You can do it simple after rooting with for example Motochopper exploit (described here http://whatswithtech.com/how-to-root-samsung-galaxy-s4/ )
Then something like this:
Code:
for gaining root access type: su
then:
copy BOOT -> dd if=/dev/block/mmcblk0p20 of=/sdcard/boot.img bs=4096
copy HIDDEN -> dd if=/dev/block/mmcblk0p27 of=/sdcard/hidden.img bs=4096
copy PARAM -> dd if=/dev/block/mmcblk0p19 of=/sdcard/param.bin bs=4096
copy RECOVERY -> dd if=/dev/block/mmcblk0p21 of=/sdcard/recovery.img bs=4096
copy SYSTEM -> dd if=/dev/block/mmcblk0p16 of=/sdcard/system.img bs=4096
Thanks a lot!
Click to expand...
Click to collapse
cool thank i was looking for that info
Just i couldn't get su to work in adb
I have been able to get Supersu (also tried superuser) on the phone but it complains about the su binaries (busybox in superuser) not being installed i have tried to install it using the market app (which said i am rooted) but i get no popup on the system.
i might try a wipe to see if that fixed it. (i did flash root to the system so it should still be there after a wipe)
first root, then system dump
unless someone knows how to do a system dump without root? or temp root solution.
I will look into the motochopper later today

you don't need "su" to work in adb shell, if you run "adb root" and "adb remount" with a modified adbd binary (inside CWM for example) you will have root access.
pls try out this root zip I just made, maybe it will work

warwolfx0 said:
QUOTE]
DELETed
Click to expand...
Click to collapse

I have root
Thanks broodplank1337
download the root that "broodplank1337" made
and put it in "C:\adb\sdk\platform-tools" (this is my adb.exe folder)
Download ClockworkMod 6.0.3.3 NORMAL from below
http://forum.xda-developers.com/showthread.php?t=2359132&highlight=recovery
aka Miustone_CWM_flash-NORMAL.zip
extract the recovery.img to the folder "C:\adb\sdk\platform-tools"
Now open up a command prompt (I did this as "run as administrator")
type "cd C:\adb\sdk\platform-tools" (or what ever the directory you extract your files)
enter this command
adb reboot bootloader <enter>
Once in bootloader,
In the command prompt type:
fastboot boot recovery.img (this takes 1min to load after the file is sent)
This will boot into ClockworkMod
goto "install zip"
goto "install zip from sideload"
in the cmd type
adb sideload root.zip
This sends to the phone and write to the phones Rom.
Now reboot and we have root without ODIN on a I9505G
BTW my file was missing busybox in the xbin i was playing around with "CWM-SuperSU.zip" as a base
It is kind of late so i may have missed some things in this write up.
Now off to the system dump.
I will repost this later as a new post to keep this clean.

ok i had some issues with viewing the files on the phone
i moved them to the sdcard and then pulled them off the card on my pc using a "sd to usb"
dd if=/dev/block/mmcblk0p20 of=/storage/extSdCard/dump/boot.img bs=4096
dd if=/dev/block/mmcblk0p27 of=/storage/extSdCard/dump/hidden.img bs=4096
dd if=/dev/block/mmcblk0p19 of=/storage/extSdCard/dump/param.bin bs=4096
dd if=/dev/block/mmcblk0p21 of=/storage/extSdCard/dump/recovery.img bs=4096
dd if=/dev/block/mmcblk0p16 of=/storage/extSdCard/dump/system.img bs=4096
Is there any other mmcblk0p i should backup
and is there any issues with posting this info on this forum
so far this only has root
i did notice that clockworkmod did give me access to root but i couldn't find the sd card while fastbooting it.
I don't think that the whole bootloader is part of what i backup, I thought there was a sbl.bin that i need too.

warwolfx0 said:
ok i had some issues with viewing the files on the phone
i moved them to the sdcard and then pulled them off the card on my pc using a "sd to usb"
dd if=/dev/block/mmcblk0p20 of=/storage/extSdCard/dump/boot.img bs=4096
dd if=/dev/block/mmcblk0p27 of=/storage/extSdCard/dump/hidden.img bs=4096
dd if=/dev/block/mmcblk0p19 of=/storage/extSdCard/dump/param.bin bs=4096
dd if=/dev/block/mmcblk0p21 of=/storage/extSdCard/dump/recovery.img bs=4096
dd if=/dev/block/mmcblk0p16 of=/storage/extSdCard/dump/system.img bs=4096
Is there any other mmcblk0p i should backup
and is there any issues with posting this info on this forum
so far this only has root
i did notice that clockworkmod did give me access to root but i couldn't find the sd card while fastbooting it.
I don't think that the whole bootloader is part of what i backup, I thought there was a sbl.bin that i need too.
Click to expand...
Click to collapse
can you please upload your system dump , thank you mate

warwolfx0 said:
Thanks broodplank1337
download the root that "broodplank1337" made
and put it in "C:\adb\sdk\platform-tools" (this is my adb.exe folder)
Download ClockworkMod 6.0.3.3 NORMAL from below
http://forum.xda-developers.com/showthread.php?t=2359132&highlight=recovery
aka Miustone_CWM_flash-NORMAL.zip
extract the recovery.img to the folder "C:\adb\sdk\platform-tools"
Now open up a command prompt (I did this as "run as administrator")
type "cd C:\adb\sdk\platform-tools" (or what ever the directory you extract your files)
enter this command
adb reboot bootloader <enter>
Once in bootloader,
In the command prompt type:
fastboot boot recovery.img (this takes 1min to load after the file is sent)
This will boot into ClockworkMod
goto "install zip"
goto "install zip from sideload"
in the cmd type
adb sideload root.zip
This sends to the phone and write to the phones Rom.
Now reboot and we have root without ODIN on a I9505G
BTW my file was missing busybox in the xbin i was playing around with "CWM-SuperSU.zip" as a base
It is kind of late so i may have missed some things in this write up.
Now off to the system dump.
I will repost this later as a new post to keep this clean.
Click to expand...
Click to collapse
I maybe wrong in this, but I have played with fastboot on my ex HTC device. the proper command to flash recovery is
Code:
fastboot flash recovery recovery.img
the proper command to flash kernel is
Code:
fastboot flash boot boot.img
with
Code:
fastboot boot recovery.img
, the recovery isn't permanent. it will be only be there for the current session. after rebooting, the stock recovery will overwrite the custom recovery. the same goes to kernel.
Sent from my GT-I9505 using Tapatalk 2

warwolfx0 said:
ok i had some issues with viewing the files on the phone
i moved them to the sdcard and then pulled them off the card on my pc using a "sd to usb"
dd if=/dev/block/mmcblk0p20 of=/storage/extSdCard/dump/boot.img bs=4096
dd if=/dev/block/mmcblk0p27 of=/storage/extSdCard/dump/hidden.img bs=4096
dd if=/dev/block/mmcblk0p19 of=/storage/extSdCard/dump/param.bin bs=4096
dd if=/dev/block/mmcblk0p21 of=/storage/extSdCard/dump/recovery.img bs=4096
dd if=/dev/block/mmcblk0p16 of=/storage/extSdCard/dump/system.img bs=4096
Is there any other mmcblk0p i should backup
and is there any issues with posting this info on this forum
so far this only has root
i did notice that clockworkmod did give me access to root but i couldn't find the sd card while fastbooting it.
I don't think that the whole bootloader is part of what i backup, I thought there was a sbl.bin that i need too.
Click to expand...
Click to collapse
NONE of this would pull anything of relation from the I9505G (except System - mmcblk0p16) as our partitions layout is completely different. And more so, it would softbrick your 9505 if you tried flashing.
Check out here - http://forum.xda-developers.com/showthread.php?t=2360346 - for a system dump from the i9505G. It has SYSTEM/BOOT/RECOVERY. Param and Hidden are both empty on our phones. This has already been used a couple times to cook roms for other S4 devices.

donovanbrock said:
NONE of this would pull anything of relation from the I9505G (except System - mmcblk0p16) as our partitions layout is completely different. And more so, it would softbrick your 9505 if you tried flashing.
Check out here - http://forum.xda-developers.com/showthread.php?t=2360346 - for a system dump from the i9505G. It has SYSTEM/BOOT/RECOVERY. Param and Hidden are both empty on our phones. This has already been used a couple times to cook roms for other S4 devices.
Click to expand...
Click to collapse
Since my backup might mess people up i am not going to post it.
but as a backup i will make a full backup of all the mmcblk0pxx file
dd if=/dev/block/mmcblk0pxx of=/storage/extSdCard/dump/mmcblk0pxx.img bs=4096
i think there is like 20 files

Those with a real I9505G google edition samsung, do u have an option in settings to always have the lightkeys light up when screen is on? The menu and the back key, that light up.

hmmm followed step bye step but phones boot loader is still locked
i do have Super User access tho
edit: fail on my part. everything worked smoothly! thanks man!

Hello. Please help me. Can I flash stock ROM GT-I9005 on my Google Edition phone GT-I9005G? Thank for answer

SnegovikRZN said:
Hello. Please help me. Can I flash stock ROM GT-I9005 on my Google Edition phone GT-I9005G? Thank for answer
Click to expand...
Click to collapse
no

How to extract recovery.img from the ASUS firmware? [7.0/8.0] [ZE552KL/ZE520KL]

Hello guys, some time ago this device had more support from developers, someone could extract the recovery.img in order to keep it updated.
I wonder if anyone would know what the procedure is for extracting.
My device is the ZE552KL (Z012D).
I followed the steps in this tutorial, however, I did not succeed: https://tinyurl.com/yd3w4pxa
I followed all the steps and tried to extract recovery.img from the Zenfone 3 ZE552KL (Z012D) Asus firmware, however, there was a problem after applying the applypatch directive.
Error: patch boot.img: Only patches to EMMC targets are supported.
And I can not solve it.
install-recovery.sh (original extraction): https://hastebin.com/lupoqovila.bash
install-recovery.sh (change): https://hastebin.com/ofuqofezat.bash
Apllypatch directive used at the prompt: applypatch -b recovery-resource.dat boot.img recovery.img 28e9d4088f51c9dafb9189eb15f061c78be55a57 18791676 4a9f7c48e01aed3a46ac8d06618239dff9834caf: recovery-from-boot.p
Error:
https://imgur.com/a/JWfyr
I also asked for help at Zentalk, but so far no one has spoken.
https://www.asus.com/zentalk/tw/thread-147621-2-1.html
Please, I'll be grateful if anyone can help.

The recovery partition is #59, therefore to back it up you can use terminal emulator and type;
Su
dd if=/dev/block/mmcblk0p59 of=/sdcard/recovery.img
To flash, go to fastboot and type
Fastboot flash recovery recovery.img
Fastboot reboot
You need root for all this. You can convert the recovery image to be flashable via recovery but it only works with twrp, not stock.

wang1chung said:
The recovery partition is #59, therefore to back it up you can use terminal emulator and type;
Su
dd if=/dev/block/mmcblk0p59 of=/sdcard/recovery.img
To flash, go to fastboot and type
Fastboot flash recovery recovery.img
Fastboot reboot
You need root for all this. You can convert the recovery image to be flashable via recovery but it only works with twrp, not stock.
Click to expand...
Click to collapse
Thanks for taking note of my question, but what I really need to know is about recovery stock. It would not be logical for my use to perform custom recovery extraction, since it is already found in the .img format from the developer's available links (TWRP).
Following the tutorial steps of the links I indicated it is possible to make a kind of compilation using the official OTA file, processing on the device itself to generate the file recovery.img stock.
Again thank you for trying to help, any and all help is very welcome.

+1

Can someone post here stock recovery.img for ze520kl newest oreo firmware?

I'd like to know how to do this as well. I went through a lot of trouble to get Oreo installed after rooting and installing TWRP on my phone running Nougat, ended up having to go back to stock and install updates incrementally. As you noted, root is required to save the stock recovery.img, but since my device is not rooted now I can't root without installing TWRP first. That would put me in the same situation as the OP. The google translate of the link posted by the OP is a bit hard to understand, can someone else give an english explanation of how to extract recovery.img from firmware zip?
TIA
Update: I managed to follow the instructions in the OP's link, ended up with a similar applypatch command as he did and also encountered the same error with running the command over adb. I'm not sure if those instructions are for all asus devices, the one in the link is Asus P028 (Zenpad 10)
applypatch -b recovery-resource.dat boot.img recovery.img f448eeec56d4d87173858cd7aec25c36a7dfaaa7 18736380 9ebabd3eb6a59cfcaf0f4f048e2d8d6d870d7924:recovery-from-boot.p

ktl20 said:
Can someone post here stock recovery.img for ze520kl newest oreo firmware?
Click to expand...
Click to collapse
Here

Error
I keep getting
/sbin/sh: f448eeec56d4d87173858cd7aec25c36a7dfaaa7: not found
whenever i go through this. what am i doing wrong? T_T

wang1chung said:
The recovery partition is #59, therefore to back it up you can use terminal emulator and type;
Su
dd if=/dev/block/mmcblk0p59 of=/sdcard/recovery.img
To flash, go to fastboot and type
Fastboot flash recovery recovery.img
Fastboot reboot
You need root for all this. You can convert the recovery image to be flashable via recovery but it only works with twrp, not stock.
Click to expand...
Click to collapse
when I type su and enter, on adb shell show error "/system/bin/sh: su: not found". my device is unrooted. I did this for boot and recovery backup before rooting. I'm using Zenfone x00rd (Live L1)