Hi, I ported a newer version of CM11 from the Galaxy Note 2 to the Galaxy S3, and it looked good. Then I flashed it, and it showed some code.
assert(getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo" || abort("This package is for "d2tmo" devices; this is a "" + getprop("ro.product.device") + "".");
assert(getprop("ro.bootloader") == "T999UVDLJA" ||
getprop("ro.bootloader") == "T999UVDLJC" ||
getprop("ro.bootloader") == "T999UVDMD5" ||
getprop("ro.bootloader") == "T999UVUEMJC" ||
getprop("ro.bootloader") == "T999VVLDLL1" ||
getprop("ro.bootloader") == "T999LUVAMB7" ||
getprop("ro.bootloader") == "T999VVLDMF2" ||
getprop("ro.bootloader") == "T999VVLUEMK5" ||
getprop("ro.bootloader") == "T999LUVUBMK4");
Something like that. Then it said something like "Error executing binary in zip" or something.
How can I manually fix this?
Wait, almost nothing will flash on my S3. -_- T-Mobile, SGH-T999?? (Blue one, by the way. )
Related
Hi
I was sitting for hours to make this thing work, but i just couldn't succeed.
I did everything I should:
-root my SK17i
-installed cwm auto-installer
-downloaded and copied the firmware to /sdcard/update.zip
So, when I boot into recovery, I choose "install zip from sd-card" and point to the update.zip file.
It starts and after a few seconds, it shows this error:
ERROR: /sdcard/update.zip (Status 7)
I have no idea, what i could do.
Please help me
Log:
-- Installing: /sdcard/update.zip
Finding update package...
I:Update location: /sdcard/update.zip
W:failed to mount /dev/block/mmcblk0p1 (No such file or directory)
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango"
assert failed: getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" || getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" || getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" || getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" || getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
yes, help please!
I got the exact same isuue on my friends phone while I was trying to install. Please help.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Error getprop("ro.product.device") == "a107" || getprop("ro.build.product") please.
hello, I have friends vercion of "A107W0_A234_001_015_2643_ROW.zip" I wanted to cmw 5.2.8 installed but I get error cm7 ::::: assert failed: getprop("ro.product.device") == "a107" || getprop("ro.build.product") == "a107" || getprop("ro.product.board") == "a107"
E:Error in /emmc/cm-7-20120726-NIGHTLY-a107.zip
(Status 7)
Installation aborted.:::::::I have installed the 5.2.8 cmw
, please help me. With greetings from Peru.
I am flashing cm 10.1 but it gives me error saying
assert failed (getprop("ro.product.device") == "trebon" || getprop("ro.build.product") == "trebon" ||
getprop("ro.product.device") == "s7500" || getprop("ro.build.product") == "s7500" ||
getprop("ro.product.device") == "GT-S7500" || getprop("ro.build.product") == "GT-S7500")
Sent from my GT-S7500 using xda app-developers app
Sameh Amnoun said:
I am flashing cm 10.1 but it gives me error saying
assert failed (getprop("ro.product.device") == "trebon" || getprop("ro.build.product") == "trebon" ||
getprop("ro.product.device") == "s7500" || getprop("ro.build.product") == "s7500" ||
getprop("ro.product.device") == "GT-S7500" || getprop("ro.build.product") == "GT-S7500")
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
The build.prop is corrupted in this zip so downloaded it from any other site and reflash and make sure to wipe anything before flashing any rom
Kind of a two-part question but didn't want to post two threads so I'll try to stay one-topic oriented. I,m still on 4.1.1 and no OTA's will DL because when I check for one it won't connect, so I don't have to worry about updating. But when I flash up to O&S's 4.1.2 stock deo-dexed or just 4.1.2 stock I can't get into any file manager or Titanium fast enough to delete or freeze updater because the OTA is downloading and getting ready to install. I guess first question is "Will it just DL and give me the option to install or will it install automatically after DL?" I should know but didn't want to hang around to find out. I've been trying to install Synergy r484 so I can get up to 4.1.2 and not have to worry about updates but can't get it to install. I'm using latest version of Philz and unchecked the "Don't Allow Old update-binary" option and still won't install. Halfway through the 2000+ pages I saw another release because the MD5's didn't match in the first post. DL'ed the new one and still won't install. I know it's an old ROM and there's no support on the "Dev" page anymore but just started flashing again and wanted to work my way up to 4.3 or 4.4 slowly, learning everything I can on the way up. Couldn't post over there anyway. Not enough posts. Anyway, here is the log I saved. Just posted the "Device Support" section to save on space. As you can see "script aborted: assert failed" before the "getprop" for "d2att" right off the git and again halfway down. It stops right there and won't install anything. I would like to get this installed but if not, I can live without it. Any help would truly be appreciated. Thank you in advance.
Checking Device Support
script aborted: assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
Installer Error (Status 7)
Edit: Never mind. Finally got it to install with an older version of TWRP.
Hi guys I have a rooted Galaxy S3, I decided to install the latest SynergyRom because I want the pDroid mainly.
I tried installing it using the latest CWM and the latest TWRP and even Philz, after clicking install the Aroma Installer opens up, I choose install and I get this :
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : SynergyROM for Galaxy S3
ROM Version : r484
ROM Author : eschelon, TrevE, Ziggy471, Virus, the_plattypus, Mr. X, freeza, NxtGenCowboy, eaglz70
Device : Galaxy S3
Start at : Wed Jul 16 19:25:57 2014
Installing SynergyROM
For the Galaxy S3
By: eschelon, TrevE, Ziggy471
Virus, Mr. X, freeza, NxtGenCowboy
the_plattypus, eaglz70
Checking Device Support
script aborted: assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
Installer Error (Status 7)
End at : Wed Jul 16 19:25:57 2014
I tried using this thread to solve the problem, however I ended up having an" error flashing zip ... " so Aroma doesn't even run anymore
This isn't a signature verification error since is already opened the zip file and started Aroma installer;
The device is obviously compatible, the ROM is the latest build so are the recoveries so why does it reach an error after checking compatibility ? Thanks in advanced guys