Help with installation of CleanROM 3.0 - Verizon HTC One (M8)

I'm having trouble with 3.0. Just updated to 4.4 today via dottats tool. Flashed twrp. Installed rom and it hangs on white HTC screen. I can turn off and on screen with power button. When I turn screen back on, I see cleanrom lock screen. When I swipe up it goes back to white HTC screen. I can power down with all options by holding power button from HTC screen.
I've reinstalled, extra wiped, used different download mirrors, reflashed recovery, etc multiple times. I just installed a different rom via twrp and that's working fine. I actually got into the rom after several attempts on one installation but there were several thingsmissing (chrome, or any browser for instance). Since that, I haven't been able to get past the white HTC screen at all, except to see cleanrom lock screen and advanced power options
Any ideas?

JelloB said:
I'm having trouble with 3.0. Just updated to 4.4 today via dottats tool. Flashed twrp. Installed rom and it hangs on white HTC screen. I can turn off and on screen with power button. When I turn screen back on, I see cleanrom lock screen. When I swipe up it goes back to white HTC screen. I can power down with all options by holding power button from HTC screen.
I've reinstalled, extra wiped, used different download mirrors, reflashed recovery, etc multiple times. I just installed a different rom via twrp and that's working fine. I actually got into the rom after several attempts on one installation but there were several thingsmissing (chrome, or any browser for instance). Since that, I haven't been able to get past the white HTC screen at all, except to see cleanrom lock screen and advanced power options
Any ideas?
Click to expand...
Click to collapse
This is a better place to ask such a question. :good:

When I installed cleanrom 3.0 I had the same problem. I had to let it sit for awhile before it would go to the setup screen. When you boot try letting it sit for awhile and see if it goes past that screen.

Its normal just let it sit for 5 minutes and the set up screen will pop up
Sent from my One M8 using XDA Free mobile app

Related

I think..I might've messed up my Captivate?

So, I installed the Evo4G statusbar found in the Themes section of the Captivate section, and it worked fine. But today, I decided I didn't want it, so I tried to install the stock one (Also found in the same thread), and it asked me to reboot. Once I did, it rebooted, but wouldn't go past the splash screen. Well, it did, but it stayed at a constant black screen. The bottom four buttons light up if I touch them, and it vibrates if I hit it enough. But the screen doesn't seem to work. At this point, I held the Menu/Home buttons (See if it did anything?) and Safe Mode came on the bottom left of the screen. I'm able to boot into the Recovery Menu, but none of the options do anything to help with my problem..
I really need my phone, and hopefully I didn't brick it. Any ideas?

[Q] sense resetting after pressing home screen after update

Every since the OTA update, whenever I'm in an app and I press the home screen to get back to my home, the screen goes white and shows the green htc logo. After that, for about 15 seconds, I see my apps on my home screen but I get the loading message. When its done with the loading screen, sense is ok again until I go into another app and I press home and the process repeats. Is anyone else having this problem and if so how do you'd fix it?
akaGERMZ said:
Every since the OTA update, whenever I'm in an app and I press the home screen to get back to my home, the screen goes white and shows the green htc logo. After that, for about 15 seconds, I see my apps on my home screen but I get the loading message. When its done with the loading screen, sense is ok again until I go into another app and I press home and the process repeats. Is anyone else having this problem and if so how do you'd fix it?
Click to expand...
Click to collapse
Not good...sounds like u gotta bad flash...try a factory reset..should fix it. good luck
akaGERMZ said:
Every since the OTA update, whenever I'm in an app and I press the home screen to get back to my home, the screen goes white and shows the green htc logo. After that, for about 15 seconds, I see my apps on my home screen but I get the loading message. When its done with the loading screen, sense is ok again until I go into another app and I press home and the process repeats. Is anyone else having this problem and if so how do you'd fix it?
Click to expand...
Click to collapse
The update stopped mine from doing this. master reset is prob the going to fix it.
Mine does it too after the update. I figured that it was putting sense to sleep to conserve energy.
Sent from my HTC Sensation 4G using Tapatalk
Mine used to do it after I played Plants vs. Zombies and still does, and now it also does it after using Netflix.
a hard reset fixed it guys. thanks.
Tried the factory reset, but still remain the same. just installed 12 app (no games) all in internal storage, but still remain problem. Need help! Thanks!

[Q] Screen won't stay on for more than an Instant

ok, weird issue.
Yesterday I came back to my TF having left it inmy bag for the day, and it would not turn on at all.
I tried various things and then decided that the battery must be totally dead.
I left it to charge over night, and come the morning was able to watch it booting.
However once It finished boot it goes to black screen. Pressing the power button sometimes gives a flicker of backlight and then goes blank again. sometimes it even gives a glimpse of the screen.
Plugging in the power sometimes gives a longer blink of the booted ROM.
I have tried a cold boot, a full data wipe and I have used NV flash to fully reinstall the ROM (Prime 1.8)
After the full reinstall I go through the Google initial setup process without a problem, as soon as the rom boots I am back to the flicker of screen going off..
Does anyone have any ideas??
Still got the problem, does this sound like hardware to anyone else?
if the screen doesnt work during boot it is hardware problem. flash ur rom again or wipe it
chatch15117 said:
if the screen doesnt work during boot it is hardware problem. flash ur rom again or wipe it
Click to expand...
Click to collapse
Screen works fine during boot
Done both of your suggestions unfortunately, as I stated in my original posting.
I am going to try going back to Stock, and assuming its an app NOT restore any during the rebuild process.

[Q] Stock ROM + Google+ = Rogers logo bootloop

I have the stock 'v10c' ROM on a 'Rogers' LG Optimus 3D.
This morning I was using the Google+ Android client and - without closing the app - pushed the power button to put the phone to sleep and put it in my pocket.
About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up. I know that usually isn't good news. The phone was unresponsive.
I pulled the battery and tried to re-boot. It gets to the Rogers screen and then boot-loops, with a flash of the Rogers screen each time it restarts a cycle. Roughly 15 seconds apart.
I did vol+down+Power (guessing based on other phones) and it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I moved the cursor down using vol+down and sletected "yes" with Home. The phone then presented a triangle logo and the green android and sat there.
Meanwhile...I Googled. After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a wipe / factory reset from the recovery menu. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now. :-/
I was wondering if maybe the phone had updated OTA in my pocket and I didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.
Anyone have any advice?
[Update: The Menu button is the enter button...not Home. So I did a real factory reset and the phone now boots to the "Welcome to your new phone" screen. *WHEW!*]
Uhmm... if Menu button is home button that means u have problem with build.prop. I never met with this kind of problem, however I think u just should turn on usb mode in cwm, put a ROM on phone, flash it and see how this will be. Don't forget to backup ur rom.
Sent from my LG-P920 using XDA Premium App
Hi there,
I've got the same problem with my LG P920.
Then I read your thread and now I can tell you how to fix...
The recovery is the right way to fix, but the homebutton is not the menu button.
You have use the Options Button the first from the left side or the 3d-button.
Than you came to factory default and you can restart youre device.
best regreads
Morphix
Anyone know the glitch that is causing this?
Sent from my LG-P925 using xda premium
If've got the boot-loop for the first time and it happend after a reboot comand on the comand app...
I have the same problem and no idea why it happens ..
I had this 2 times in one week! very anoying..

[Q] Brick / Boot loop problem

I honestly need help.
I'm not sure what to categorize my issue under.
I am stuck in a screen with the green android and the spinning thing in the middle, with a progress bar, but the bar just has a moving animation, looks like it is moving to the left, not getting longer or filling up like usual progress bars.
I am unable to get to the boot loader or recovery.
The issue started after I flashed Cyanogen Mod 10.2 Stable.
it booted fine then, but when I went to use it, it would have a never ending cycle of app not responding at the part where it asks to sign in to cyanogenmod account. I got to settings without signing in by quickly sliding the status bar and clicked on factory reset.
From there it proceded to reboot and now I am stuck in the screen described.
I have tried all the button combinations, reset with pin, nothing will get to bootloader or recovery.
ADB does not find the device, also no devices found when try fastboot devices line.
I have also tried putting the firmware zip on a microsd, but nothing new happens either.
any suggestions appreciated.
** edited ** Issue is resolved. Turns out I just needed to wait longer (about 2 hrs) ... I did turn it off using combo of power and Vol -, left it off overnight, turned it on in the morning and left it alone. I finished whatever it was trying to do, and now CyanogenMod 10.2 stable is working great.

Categories

Resources