Hi,
Sorry form my English.
I have problem with moto g (xt1039). I try to flash new firmware, but I writed firmware for different models, wright now phone stuck at recovery mode. When I write new firmware I always have error. My bootloader is unlocked. I try to write this two firmware ( first: (Moto_G_LTE_XT1039)_RET-GB-SS_4.4.4_KXB21.14-L1.46_cid7_CFC_1FF.xml, second: (Moto_G_LTE_XT1039)_TESCO-GB_4.4.4_KXB21.14-L1.46_cid7_CFC_1FF.xml) and I have this error:
C:\Users\kacpe_000\Desktop\RETAIL-GB_4.3_14.10.0Q3.X-76-LGG-8_cid7_CFC_1FF_svc.x
ml.modaco.r3>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.033s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.384s]
finished. total time: 0.421s
C:\Users\kacpe_000\Desktop\RETAIL-GB_4.3_14.10.0Q3.X-76-LGG-8_cid7_CFC_1FF_svc.x
ml.modaco.r3>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.110s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash rpm
FAILED (remote failure)
finished. total time: 11.124s
I do everythings from this topic: http://forum.xda-developers.com/showthread.php?t=2542219
This phone had firmware from tesco GB.
Stock recovery?
me_is_rushin said:
Stock recovery?
Click to expand...
Click to collapse
Yes, I don't change recovery. I always write stock firmware using that guide.
hello guys from XDA, my problem is this, I have a moto motorola g (2013) I install the GPE version moto g OTA update kk 4.4.4, using mototool (no problems for months), one day I was charging my Motog, this is reset and stayed at motorola logo.
I tried to repair it with mototool but the result did not work, then I try to do it manually with fastboot since the following result:
Code:
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.947s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.259s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (47152 KB)...
OKAY [ 6.557s]
writing 'modem'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition modem
FAILED (remote failure)
finished. total time: 11.569s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (717 KB)...
OKAY [ 5.042s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 10.059s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot erase modemst1
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 10.011s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot erase modemst2
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 10.023s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (70 KB)...
OKAY [ 5.050s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 10.087s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10240 KB)...
OKAY [ 5.370s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 10.880s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 5.364s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.875s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash system system.img_sparsechunk
.0
target reported max download size of 536870912 bytes
sending 'system' (255843 KB)...
OKAY [ 13.505s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 22.446s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash system system.img_sparsechunk
.1
target reported max download size of 536870912 bytes
sending 'system' (245954 KB)...
OKAY [ 13.127s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 21.419s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot flash system system.img_sparsechunk
.2
target reported max download size of 536870912 bytes
sending 'system' (235703 KB)...
OKAY [ 12.817s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 24.524s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot erase cache
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 10.038s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot erase userdata
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 10.039s
C:\Users\LilDoggy\Desktop\GPRfix444>fastboot reboot
the room used was a GPE 4.4.4, then try with a stock version, and it did not work.
the result is always this:
Code:
C:\Users\LilDoggy\Desktop\gpt_new>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 9.947s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 15.259s
after dealing with the CM11, but when trying to install CWM recovery, I have the following error:
Code:
C:\Users\LilDoggy\Desktop\CWM>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 5.364s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 10.875s
I have tried everything I found on the internet about this but nothing.
any suggestions, please help.
and sorry for my poor English !!
LilDoggy said:
hello guys from XDA, my problem is this, I have a moto motorola g (2013) I install the GPE version moto g OTA update kk 4.4.4, using mototool (no problems for months), one day I was charging my Motog, this is reset and stayed at motorola logo.
I tried to repair it with mototool but the result did not work, then I try to do it manually with fastboot since the following result:
Click to expand...
Click to collapse
Questions goes HERE
try these two links. You can first download Stock ROM specific to your model number . Procedure remains the same .
http://forum.xda-developers.com/showthread.php?t=2739919
http://forum.xda-developers.com/moto-g/general/xt1033-t2821556
after that you can update to 4.4.4
GPE and Stock ROM has different file formats.
trying
aayush_neov said:
try these two links. You can first download Stock ROM specific to your model number . Procedure remains the same .
http://forum.xda-developers.com/showthread.php?t=2739919
http://forum.xda-developers.com/moto-g/general/xt1033-t2821556
after that you can update to 4.4.4
GPE and Stock ROM has different file formats.
Click to expand...
Click to collapse
ok, I'll try, although I tried other stock and GPE, even that hope dies at last, I will try these links
sorry for this start a new topic
Ja_som said:
Questions goes HERE
Click to expand...
Click to collapse
sorry for this start a new topic as well, only with many buttons and forums, I did not know where to express my question. Thank you
I forget to mention that my Motog is xt1032 16 gbs
aayush_neov said:
try these two links. You can first download Stock ROM specific to your model number . Procedure remains the same .
http://forum.xda-developers.com/showthread.php?t=2739919
http://forum.xda-developers.com/moto-g/general/xt1033-t2821556
after that you can update to 4.4.4
GPE and Stock ROM has different file formats.
Click to expand...
Click to collapse
I forget to mention that my Motog is xt1032 16 gbs, I do not think this room to work on my Motog, although some commands come I have never used the first line.
thank you!!
LilDoggy said:
I forget to mention that my Motog is xt1032 16 gbs, I do not think this room to work on my Motog, although some commands come I have never used the first line.
thank you!!
Click to expand...
Click to collapse
Did you unlock the bootloader?
Yes of course
skyguy126 said:
Did you unlock the bootloader?
Click to expand...
Click to collapse
Yes of course, I had already installed the rom stock version to rom GPE. My version of bootloader is 41.13
I have already written, download your phone specific firmware. from elsewhere on Motog G forums
You dont have to do anything just follow instructions properly and copy paste the code.
You took risk of installing GPE on your phone and afraid of these simple instructions !!
partition gpt.bin
aayush_neov said:
I have already written, download your phone specific firmware. from elsewhere on Motog G forums
You dont have to do anything just follow instructions properly and copy paste the code.
You took risk of installing GPE on your phone and afraid of these simple instructions !!
Click to expand...
Click to collapse
I have already tried but the result is always the same as they drew the "fastboot flash partition gpt.bin" command,
the result is always:
sending 'partition' (32 KB) ...
OKAY [9.947s]
writing 'partition' ...
(bootloader) This May take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image ...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. Total time: 15.259s.
KK this with 4.4.4 versions with versions older than 4.4.4 (eg 4.4.3) sends a partition error.
from what I read it is a common problem and is solved by downloading a new gpt.bin file but does not work in my case, I begin to think that the problem is my Motog.
LilDoggy said:
I have already tried but the result is always the same as they drew the "fastboot flash partition gpt.bin" command,
the result is always:
sending 'partition' (32 KB) ...
OKAY [9.947s]
writing 'partition' ...
(bootloader) This May take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image ...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. Total time: 15.259s.
KK this with 4.4.4 versions with versions older than 4.4.4 (eg 4.4.3) sends a partition error.
from what I read it is a common problem and is solved by downloading a new gpt.bin file but does not work in my case, I begin to think that the problem is my Motog.
Click to expand...
Click to collapse
Then you should search extensively on XDA, other members might be able to help you.
Try using mfastboot, available in this zip:
https://www.androidfilehost.com/?fid=23578570567719065
Noob here.
Got XT1034 and android version 4.4.2 on it. Got it unlocked using ebay seller and it's working fine with other carriers.
Trying to flash the firmware to 4.4.2 retail one following this thread http://forum.xda-developers.com/show....php?t=2542219
1st command runs fine: -
C:\Mobile>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.023s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.468s]
finished. total time: 0.491s
2nd one fails: -
C:\Mobile>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1940 KB)...
OKAY [ 0.083s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.457s
Can anyone guide me?
Do I need to unlock the bootloader before firmware change? Moto G bootloader screen shows "The Device is Locked. Status Code 0"
Also which option do i need to choose on Moto G bootloader screen before proceeding?
Normal Powerup
Recovery
Factory
Switch Console [NULL: null]
Barcodes
BP Tools
According to post #1187 of the thread you linked it states an unlocked bootloader is unnecessary
Dear all,
I own a XT1541 and updated to Marhsmallow via OTA few weeks ago. I encountered some troubles with the performance. I also had the issue that a single app was attempted to be optimized on every boot. Therefore, I decided to reset it to factory settings. However, it seemed that this process failed (waited nearly for an hour to complete but nothing happened).
After rebooting then manually, I am stuck in a fastboot message
AP Fastboot Flash Mode (Secure)
failed to validate boot image
ERROR: failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
CID Read Failure
Invalid CID status 0x69
I can access the device via my Linux using fastboot command. What do you propose to recover from my problem.
Thanks
IK1981 said:
Dear all,
I own a XT1541 and updated to Marhsmallow via OTA few weeks ago. I encountered some troubles with the performance. I also had the issue that a single app was attempted to be optimized on every boot. Therefore, I decided to reset it to factory settings. However, it seemed that this process failed (waited nearly for an hour to complete but nothing happened).
After rebooting then manually, I am stuck in a fastboot message
AP Fastboot Flash Mode (Secure)
failed to validate boot image
ERROR: failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
CID Read Failure
Invalid CID status 0x69
I can access the device via my Linux using fastboot command. What do you propose to recover from my problem.
Thanks
Click to expand...
Click to collapse
Try flashing the factory image here are the instructions
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
bobby0724 said:
Try flashing the factory image here are the instructions
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Click to expand...
Click to collapse
Already tried this. Already fails at first command... When doing this for the first time, it takes up to one minute to get a response. When retrying, it fails immediately
Code:
~/Downloads/XT1541_OSPREY_RETEU_6.0_MPI24.65-33.1_cid7_subsidy-DEFAULT_CFC__v2.xml# fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: 55.425
Try usuing my Motorola downgrade tool , or Motorola utility , created by me , to try and fix problems like this. Links can be found in the general section of Moto g 3 forums , or in Moto g 3 devdb. Therealduff1 is the username you are looking for . I am happy to try and help you with this !
therealduff1 said:
Try usuing my Motorola downgrade tool , or Motorola utility , created by me , to try and fix problems like this. Links can be found in the general section of Moto g 3 forums , or in Moto g 3 devdb. Therealduff1 is the username you are looking for . I am happy to try and help you with this !
Click to expand...
Click to collapse
Thanks for your help. Tried it with your tool but as far as I could see I land in the same troubles.
Code:
OSPREY_RETEU_6.0_MPI24.65-33_cid7_subsidy
please move all of the firmware files into the moto toolkit directory (the same folder containing toolkit.py)
Please make sure usb debugging is turned on in developer settings, then type 'done' into this promptdone
error: device '(null)' not found
Has your device successfully loaded bootloader mode ? please type 'yes' if it has successfully loadedyes
Press enter to confirm you would like to upgrade to android marshmallow ;)
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 55.795s
Partition table has been flashed
target reported max download size of 268435456 bytes
sending 'bootloader' (2546 KB)...
OKAY [ 0.094s]
writing 'bootloader'...
(bootloader) flashing sbl1 ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash sbl1
FAILED (remote failure)
finished. total time: 1.438s
Bootloader has been flashed
target reported max download size of 268435456 bytes
sending 'logo' (1352 KB)...
OKAY [ 0.062s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.172s
boot logo has been flashed
target reported max download size of 268435456 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.530s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 1.093s
boot.img has been flashed
target reported max download size of 268435456 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.531s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 1.094s
Stock marshmallow recovery has now been flashed
target reported max download size of 268435456 bytes
sending 'system' (238438 KB)...
OKAY [ 7.500s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 15.891s
System part 1 has been flashed
target reported max download size of 268435456 bytes
sending 'system' (238552 KB)...
OKAY [ 7.492s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 9.608s
System part 2 has been flashed
target reported max download size of 268435456 bytes
sending 'system' (256695 KB)...
One thing that confuses me is the fact that the tool tells me that I shall turn on the USB debug mode. However, since Android does not boot any longer, I have no chance to do this in the Settings. Is there any way to enable this debug mode in another way?
I was on latest stock German retail firmware and unlocked the bootloader and then tried to flash twrp via fastboot. Somehow the recovery didn't boot
and I've tried to reflash stock 5.1 firmware. Now the partition table or bootloader seems broken:
It reports Bootloader 41.1A in fastboot and "Device is UNLOCKED. Status Code: 3"
Using the stock flash method every partition seems to be gone:
All partitions report back: "(bootloader) has-slot:xxx: not found", I can still format system partition.
Code:
[email protected]:/.../stock # fastboot flash partition gpt.bin
(bootloader) has-slot:partition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.046s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.326s]
finished. total time: 0.372s
[email protected]:/.../stock # fastboot flash motoboot motoboot.img
(bootloader) has-slot:motoboot: not found
target reported max download size of 536870912 bytes
sending 'motoboot' (1953 KB)...
OKAY [ 0.141s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.081s]
finished. total time: 1.222s
[email protected]:/.../stock # fastboot flash logo logo.bin
(bootloader) has-slot:logo: not found
target reported max download size of 536870912 bytes
sending 'logo' (295 KB)...
OKAY [ 0.089s]
writing 'logo'...
OKAY [ 0.102s]
finished. total time: 0.192s
I only have Linux systems around to play with adb and fastboot. No chance to use blankflash windows tools. Any idea how I can unbrick the phone?
Depending on the distro, root is required to run fastboot properly. For example, in Ubunutu the command is: sudo fastboot devices
"root" is in front of the command line