Database Info

[Q] CM7 Home button opens clock app, calls go direct to speakerphone

It's apparently a semi common problem.
My Wildfire running CM7 will always open up the clock app when I press the home button. Freezing the clock stops this happening.
Similarly, when I answer or make a call, the speakerphone is automatically activated. From what I can tell, the phone thinks it's docked, and indeed, if I set the phone to make a sound when it's docked, you do hear the notification.
If I plug in the power cable and wiggle it around, I can get it to activate/ deactivate this, but I dont have this problem at all if I go back to the Sense backup I have. (Should note, I've cleaned out the power socket with all manner of stuff, to no avail (thought it might be lint etc))
Basically, is there any way I can stop the phone from thinking it's docked/ just remove the dock facility entirely?
I found a thread somewhere that said something about changing the name of a dock related apk somewhere, but I can't for the life of me find it again.
Thanks!

I would start with a fresh install if you haven't tried that already.
Hit that thank button if I helped!

Yup, should've mentioned I've done that numerous times with different versions of stable CM7. Did a full wipe and cleared the dalvik cache each time too.
The problem doesnt happen until the phone has fully loaded i.e. the home button works normally for the first 10 seconds or so of the phone being on. Then I hear the notification to say the phone has been docked, and the problems begin.

Have you thought of uninstalling the docking software, and then rebooting?
Hit that thank button if I helped!

Well that's what I'm asking - how exactly do I do that?

I would download this,
http://www.apkapplications.com/2011/07/root-uninstaller-pro-apk-v121-download.html
Then look for the docking .apk
Hit that thank button if I helped!

Well I used that to freeze the clock before and that worked to stop the home button going to the clock, but the speakerphone issue remained.
There was no docking apk as far as I could tell.

Okay, I've "solved" this, and I feel compelled to share how I did it, since EVERY thread on this on every forum is unresolved.
My problem was something in the USB jack - I thought I had cleaned it properly, but after some WD40 and jamming a paperclip in there, I no longer get the problem...at least for now.
I still find it bizarre that I never had this problem with the stock sense ROM (and didnt have it when I reverted back to my backup of it), but what can you do!?

flamph said:
Okay, I've "solved" this, and I feel compelled to share how I did it, since EVERY thread on this on every forum is unresolved.
My problem was something in the USB jack - I thought I had cleaned it properly, but after some WD40 and jamming a paperclip in there, I no longer get the problem...at least for now.
I still find it bizarre that I never had this problem with the stock sense ROM (and didnt have it when I reverted back to my backup of it), but what can you do!?
Click to expand...
Click to collapse
Glad you got it fixed!
Sent from my DROID3 using XDA App

same problem here, tried everything, reflashing, data wipe, cache wipe.
and same as OP sense based roms do not show this symptoms.
I have this problem with CM7 and almost on every rom based on it.
I searched in many places, but there aren't any positive solutions.
please help.
P.S.- cleaning the USB port also didn't work for me..

I found a way to disable dock mode. there is an app called NoDock which disables the dock mode at OS level.
It requires root permission to disable the dock. so your phone must be rooted.
unlike apps like DockNothing this actually does the job.
no more auto speakerphone modes, no more home button taking to clock app.
m.appszoom.com/android_applications/tools/nodock-free-trialneed-root_ogod.html

[ROM][PORT]JellyBread-CM7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port from the EVO 4G of a ROM by kendallc123, this thread can be found here:http://forum.xda-developers.com/showthread.php?t=1974067
-CM7 Stability
-a2sd
-GApps included
-JB font
-JB wallpapers
-Nexus 4 UI sounds, ringtones, and notification sounds
-ICS/JB Theme by Sonnysekhon (inside theme chooser)
-Sony Xloud Audio Engine and Beats Audio
-Bravia Engine
-3G, 4G, & Wifi Speed Hack
-Battery Saving Tweaks
-Zipaligned
v1:
-Added ICStorch
-Added Email
-Added Sense 4.0 clock
-Keyboard Lights
1. Download ROM
2. Place ROM on sd
3. Reboot into recovery
4. Make a nand backup (if you want, usually a good idea)
5. Superwipe at least 3 times
6. Wipe dalvik cache
7. Install ROM from sd
8. Reboot and enjoy
*kendallc123-for letting me use this ROM
*LOTK:
-jamieg71
-ropodope
-PapaSmurf151 (for his continued help)
-kendallc123
*megaghostgamer
*BigSplit
-Anyone who I forgot, shoot me a PM.
Disclaimer: You are responsible for your own actions.
Link:
http://d-h.st/YRK
MD5 Sum:*c30d051f1b63bed84e40cc0fbdcb8ae4
If you like or appreciate my work hit the THANKS button.

Screenshot 1

Screenshot 2

Screenshot 3-Camera

Reserved

Good job on all the ports and roms guys time to load up boot manager again
sent from a nuclear explosion

Looking Hellua nice

will not boot for me i did the fastboot commands and still

tello2323 said:
will not boot for me i did the fastboot commands and still
Click to expand...
Click to collapse
Do you have an SD partition? I think you have to have one for this ROM, didn't think to test without an SD partition. A2SD is baked in. It would be great if someone could confirm this, cuz I don't wanna delete my partition lol.

bilgerryan said:
Do you have an SD partition? I think you have to have one for this ROM, didn't think to test without an SD partition. A2SD is baked in. It would be great if someone could confirm this, cuz I don't wanna delete my partition lol.
Click to expand...
Click to collapse
Well in SS the a2sd version will still boot with no partition but it will reboot upon installing a app.
His md5 could be bad or maybe not a full wipe. Its hard to tell based on info provided
Sent from a freaked out Jellybean

If you guys have problems with a ROM: BE AS SPECIFIC AS POSSIBLE AND IT IS MORE LIKELY TO GET SOLVED. It's not just my ROMs we are talking about, we can't help you if you are vague. And logcats are the most helpful thing if you have a problem that is not in the OP. We are here to help but you have to help us to help you.

bilgerryan said:
If you guys have problems with a ROM: BE AS SPECIFIC AS POSSIBLE AND IT IS MORE LIKELY TO GET SOLVED. It's not just my ROMs we are talking about, we can't help you if you are vague. And logcats are the most helpful thing if you have a problem that is not in the OP. We are here to help but you have to help us to help you.
Click to expand...
Click to collapse
Well put, I used to hate someone saying this is broke and leaving it at that. Because 75% of the time its user specific or created so its hard for us to track down what happened. The standard for reporting bugs should be
The security type of phone eg s-on/s-off
Wipe process( most important part of flashing)
If the md5 was checked and matched. If anything else was restored in recovery or flashed with the ROM. But that's my opinion
Sent from a freaked out Jellybean

Yes definitely. The more relevant information provided, the easier to diagnose the issue. Then formulate a solution.
TEAM MiK
MikROMs Since 3/13/11

Thanks so much for this, much different than the stock GingerBread I just replaced.
I've only been using Android about 6 months and was running a rooted stock kernel and dodgekernel, but I have to say this build feels much quicker and looks much slicker and has a very nice kernel built in.
I don't know if I was just behind the times or what but is that really just a skin/look change on the Play Store? It's extremely different and very nice looking to what I was using before (and about 10x faster).
I did run in to a couple issues, that are probably just user issues.
I've reinstalled all the apps I was used to but noticed that starting up a navigation, or music file or inputting an address doesn't bring up the prompt I'm used to of "Which application should we open this with". In fact I cannot find where any default tasks can be assigned anywhere. Whenever I go to manage applications, "Launch by default" always says "No defaults set." for every single application.
Another oddity that I think is related to this, when I hit the 'action'/'smart' button my bluetooth it just goes 'dut-dut' and does nothing.
I'm pretty sure Voice Commands is installed, but it won't come up and now I've installed My MotoSpeak and that will not respond either, and I think this is because I cannot choose that button as a task and nothing is set up by default.
Thanks for the help and the nice build.
EDIT: I just noticed that the CM10 roms says that "BT call audio." could be a problem. I know that is a whole different animal, but could that be an issue here as well? Its odd, my BT will play media music fine, but will not play phone/call audio correctly, just hear a buzzing.

itjstagame said:
Thanks so much for this, much different than the stock GingerBread I just replaced.
I've only been using Android about 6 months and was running a rooted stock kernel and dodgekernel, but I have to say this build feels much quicker and looks much slicker and has a very nice kernel built in.
I don't know if I was just behind the times or what but is that really just a skin/look change on the Play Store? It's extremely different and very nice looking to what I was using before (and about 10x faster).
I did run in to a couple issues, that are probably just user issues.
I've reinstalled all the apps I was used to but noticed that starting up a navigation, or music file or inputting an address doesn't bring up the prompt I'm used to of "Which application should we open this with". In fact I cannot find where any default tasks can be assigned anywhere. Whenever I go to manage applications, "Launch by default" always says "No defaults set." for every single application.
Another oddity that I think is related to this, when I hit the 'action'/'smart' button my bluetooth it just goes 'dut-dut' and does nothing.
I'm pretty sure Voice Commands is installed, but it won't come up and now I've installed My MotoSpeak and that will not respond either, and I think this is because I cannot choose that button as a task and nothing is set up by default.
Thanks for the help and the nice build.
EDIT: I just noticed that the CM10 roms says that "BT call audio." could be a problem. I know that is a whole different animal, but could that be an issue here as well? Its odd, my BT will play media music fine, but will not play phone/call audio correctly, just hear a buzzing.
Click to expand...
Click to collapse
There are ICS/JB themes you can download, but some of the theming is within the ROM. As for BT calling, I am only able to test BT by sending files, I no longer own a headset (My Planatronics took a ride in the washer).... Speed is what I shoot for on all my ROMs

Also... Did you restore data when you restored your apps? If you did, reflash and restore apps without data, it might fix your problem.

bilgerryan said:
Also... Did you restore data when you restored your apps? If you did, reflash and restore apps without data, it might fix your problem.
Click to expand...
Click to collapse
Absolutely agree :good: . A Fresh CLean install when first flashing a Rom will avoid a lot of issues. It may take more effort, and time. But it usually gives the best results.

bilgerryan said:
Also... Did you restore data when you restored your apps? If you did, reflash and restore apps without data, it might fix your problem.
Click to expand...
Click to collapse
I used to HATE restoring data, but in most cases its safe since the recent updates to TiBU
Sent from a KangBanged JellyBean

bilgerryan said:
Also... Did you restore data when you restored your apps? If you did, reflash and restore apps without data, it might fix your problem.
Click to expand...
Click to collapse
I actually didn't know there was an option for that, how would you go about doing that for future reference?
Whenever I run a new rom I wipe data 3 times, cache and davlik and start fresh.
I don't use that many apps anyway, just some key ones every day for the drive, so only takes about a couple hours to get set back up and much of that time is just experiencing the new rom and finding what's different.
Yeah speed is incredible, I mean my old kernel was ok when run at 1.5Ghz, but that stock htc launcher or whatever 2.3.5 had would often 'spin' for 5-10 seconds when just trying to switch apps or multitask. There were other instances too, just felt like I/O speed was much different.
I'm sure it helped to not have any of the Sprint/HTC cruft to deal with, but especially navigating apps in the launcher, multitasking and browsing Play Store are beyond incredible, basically instant. My wife finally played with the new rom a bit and said she thought it was just 'too fast' compared to her 4s, she just "didn't like it". I have no idea what that means, but I for one love the speed. I don't need it to be slow to convince me it's working .
This is also my first time using link2sd, I didn't know about it with my old rom and was perpetually with ~40mb left (and a full SD). My trial of the rom and adding sd-ext was because I finally upped to a 32gb and decided to look around while I was upgrading.
As for exact issues: Pressing the 'smart' button on my Bluetooth headset does nothing, getting me 2 quick beeps.
Voice/phone audio through my BT will not work. It's odd because all media, music, text to speech, everything else works fine, and the microphone works fine for voice recognition, etc.
But when on the phone, it sounds a bit like when a phone is half off the hook, a steady, kinda staticy tone and every now and then a juggling/clunk sound (reminds me when someone on the other end played with hanging or half hanging up the receiver). I can switch to headset or speaker while in the call and both are fine, and bluetooth goes silent while in the other modes. It's crazy though because I will hear my gps speak to me overtop of the staticy 'lack of phone' while on BT.
The first issue I fixed: After much internet searching I found other users on ICS experiencing the same issue with the button and they suggested downloading Voice Control Test. It sounds odd, because I've downloaded all sorts of stuff and they work but I have to touch the screen to start them. But just as was reported on the website I found it on:
1) Install Voice Control (Test)
2) Start it up
3) Press the button on your BT
4) MAGIC, suddenly your phone brings back the old Gingerbread option asking which App you'd like to use to complete this action and you can choose to pick a default too, my choices were Voice Control Test or My Motospeak, for some reason stuff like iris and jeannie were missing, but regardless, I hit default, My MotoSpeak and now my 'Smart' button works fine.
5) Un-install Voice Control, button keeps working fine.
Also I haven't tested entering a GPS location yet, but I was playing with some other apps and again was prompted for that other action. This might have reenabled the old prompting for various commands somehow.
Also, I noticed that there was no option for 'Voice Command', which most forums seem to suggest is the old 'built in' app that ran when you pressed the BT button. I'm not sure, but that basic issue might just be that no default app was installed to begin with, but it is annoying that installing something like My Motospeak doesn't help and there's no way to manually set this to the BT button 'action'. Maybe having something lightweight like Voice Command in the rom by default would be a nice feature, the same way you have that light term emulator there by default.
Any thoughts at all about phone audio over BT? It seems so odd since media works and seems more difficult, like maybe an issue with how the dialer is handing off or passing the audio stream to the BT. Maybe there are other 'dialers' in play store, I'm not that familiar, but this seems like it'd be in a common piece in the rom that handles phone audio.
For now I'm going to try to get a voip/sip set up and see if that works, might be nicer anyway because then I can use data while on the 'phone' finally on Sprint.
Thanks again for the work on the rom.

itjstagame said:
I actually didn't know there was an option for that, how would you go about doing that for future reference?
Whenever I run a new rom I wipe data 3 times, cache and davlik and start fresh.
I don't use that many apps anyway, just some key ones every day for the drive, so only takes about a couple hours to get set back up and much of that time is just experiencing the new rom and finding what's different.
Yeah speed is incredible, I mean my old kernel was ok when run at 1.5Ghz, but that stock htc launcher or whatever 2.3.5 had would often 'spin' for 5-10 seconds when just trying to switch apps or multitask. There were other instances too, just felt like I/O speed was much different.
I'm sure it helped to not have any of the Sprint/HTC cruft to deal with, but especially navigating apps in the launcher, multitasking and browsing Play Store are beyond incredible, basically instant. My wife finally played with the new rom a bit and said she thought it was just 'too fast' compared to her 4s, she just "didn't like it". I have no idea what that means, but I for one love the speed. I don't need it to be slow to convince me it's working .
This is also my first time using link2sd, I didn't know about it with my old rom and was perpetually with ~40mb left (and a full SD). My trial of the rom and adding sd-ext was because I finally upped to a 32gb and decided to look around while I was upgrading.
As for exact issues: Pressing the 'smart' button on my Bluetooth headset does nothing, getting me 2 quick beeps.
Voice/phone audio through my BT will not work. It's odd because all media, music, text to speech, everything else works fine, and the microphone works fine for voice recognition, etc.
But when on the phone, it sounds a bit like when a phone is half off the hook, a steady, kinda staticy tone and every now and then a juggling/clunk sound (reminds me when someone on the other end played with hanging or half hanging up the receiver). I can switch to headset or speaker while in the call and both are fine, and bluetooth goes silent while in the other modes. It's crazy though because I will hear my gps speak to me overtop of the staticy 'lack of phone' while on BT.
The first issue I fixed: After much internet searching I found other users on ICS experiencing the same issue with the button and they suggested downloading Voice Control Test. It sounds odd, because I've downloaded all sorts of stuff and they work but I have to touch the screen to start them. But just as was reported on the website I found it on:
1) Install Voice Control (Test)
2) Start it up
3) Press the button on your BT
4) MAGIC, suddenly your phone brings back the old Gingerbread option asking which App you'd like to use to complete this action and you can choose to pick a default too, my choices were Voice Control Test or My Motospeak, for some reason stuff like iris and jeannie were missing, but regardless, I hit default, My MotoSpeak and now my 'Smart' button works fine.
5) Un-install Voice Control, button keeps working fine.
Also I haven't tested entering a GPS location yet, but I was playing with some other apps and again was prompted for that other action. This might have reenabled the old prompting for various commands somehow.
Also, I noticed that there was no option for 'Voice Command', which most forums seem to suggest is the old 'built in' app that ran when you pressed the BT button. I'm not sure, but that basic issue might just be that no default app was installed to begin with, but it is annoying that installing something like My Motospeak doesn't help and there's no way to manually set this to the BT button 'action'. Maybe having something lightweight like Voice Command in the rom by default would be a nice feature, the same way you have that light term emulator there by default.
Any thoughts at all about phone audio over BT? It seems so odd since media works and seems more difficult, like maybe an issue with how the dialer is handing off or passing the audio stream to the BT. Maybe there are other 'dialers' in play store, I'm not that familiar, but this seems like it'd be in a common piece in the rom that handles phone audio.
For now I'm going to try to get a voip/sip set up and see if that works, might be nicer anyway because then I can use data while on the 'phone' finally on Sprint.
Thanks again for the work on the rom.
Click to expand...
Click to collapse
If you are using Titanium Backup it restores app data by default, there are three options near the top of the screen when choosing apps to restore... Thanks for the input tho, it's something I don't really think about because I no longer have a BT headset. I'll have to look into it... Too fast? Lol there's no such thing.

[Q] Bluetooth will not turn on...

Just got a replacement N5 from Google for a warranty issue and after full re-root and setup I went to get in the car today and use bluetooth and I noticed a problem. Bluetooth will not turn on. Tapping the slider moves the position to on but it remains greyed out and, in fact, off. I tried a restore of the bluetooth share and pairings from Titanium backup and that just hung and never completed. I can always factory reset it but I hate to go back through that ... anyone got a way to 're-install' bluetooth and save a reset and reconfiguring for me?

SWBgHz said:
Just got a replacement N5 from Google for a warranty issue and after full re-root and setup I went to get in the car today and use bluetooth and I noticed a problem. Bluetooth will not turn on. Tapping the slider moves the position to on but it remains greyed out and, in fact, off. I tried a restore of the bluetooth share and pairings from Titanium backup and that just hung and never completed. I can always factory reset it but I hate to go back through that ... anyone got a way to 're-install' bluetooth and save a reset and reconfiguring for me?
Click to expand...
Click to collapse
This apparently has been problem for Nexus 4 and Nexus 5. One poster from android central posted this for his Nexus 4:
I called Google technical support and they found a solution for me.
-In your Nexus 4, go to parameters/Applications/All/Bluetooth
-Here: erase cache, data and updates.
-Resart your phone.
In Nexus 5 Settings>Apps>All>Bluetooth Share. There you might try Clear data and Clear cache.
Got nothing to lose. Hope it works. I cannot test it myself since my Bluetooth is working.

Thanks for the suggestion. I had looked around and saw a couple mentions loosely similar related to the N4 but wasn't sure if same applied to N5. Looking though ... I do not have a bluetooth share app installed. That must be the issue, anyone got a way to re-install that Bluetooth Share, seems my backups from Titanium won't restore it.

Found thread where someone had your issue and solved it with reset.
http://forum.xda-developers.com/google-nexus-5/help/activate-bluetooth-t2595761
Maybe you could do backup to PC and get this restored with reset.
I know it is a PITA.

I figured a reset would square it away, was just hoping to find a way to avoid that if I could. I suppose next w/e I will reset if I don't find another way to get BY back.
Sent from my Nexus 5 using xda app-developers app

SWBgHz said:
Thanks for the suggestion. I had looked around and saw a couple mentions loosely similar related to the N4 but wasn't sure if same applied to N5. Looking though ... I do not have a bluetooth share app installed. That must be the issue, anyone got a way to re-install that Bluetooth Share, seems my backups from Titanium won't restore it.
Click to expand...
Click to collapse
It is working in Nexus 5 same as N4, Go ahead same way it will work
https://play.google.com/store/apps/details?id=com...bluetoothfixrepair‎

I tried, but there is no Bluetooth Share app installed that I can see in the program manager.
Sent from my Nexus 5 using xda app-developers app

joannn said:
https://play.google.com/store/apps/details?id=com...bluetoothfixrepair‎
Click to expand...
Click to collapse
When I run this app, it says no BT folder found. Seems the issue is that somehow this BT Share app just isn't there.

Another fix...
I know you already solved your problem, but I thought for people like me, who have found this thread later on, I'd just sign up to XDA and post my fix.
I didn't want to do a hard reset, so I played around with the "Bluetooth-Share"-thing in the Android app manager.
I cleared the cache and the data, that didn't do anything, even after a reboot I couldn't get the Bluetooth toggle from beging greyed out.
After that, I found that button at the very top right, that is labeled as " Uninstall Updates" or something like that. I tapped it and tapped OK at the following prompt. Where the "Uninstall Updates" button was before, should now be a greyed out "Disable" button. Then you need to reboot.
Try to enable Bluetooth. The toggle should turn blue after a few seconds as usual. Bluetooth should work normally now.
I hope my post helped anybody, :cyclops:
-hiwye

I am not having any luck. My bluetooh stopped working after doing a hard reset. Please note I've never rooted or flashed a ROM, or unlocked boot loader or anything. My N4 and N5 have always been completely stock.
I've tried everything in this thread, except I am not sure what hiwye is talking about as I cannot find an uninstall updates. I went ahead and tried another factory restore/wipe and still have same issue. I hit toggle to turn Bluetooth on, it then immediately toggles back to off.
Just as a side note, my bluetooh was working fine until the factory wipe/reset. I did the reset in an attempt to fix a sim card slot issue, that is also still not resolved. Upon restarting my phone, I get "no sim card" message. I got a new sim card and also confirmed the sim card works fine in other phones..... i can turn off, pop it out and back in and boot it again. sometimes it will see the sim card again. It may take 20 times, but finally work..... I should probably start a new thread on the sim card thing, but wondering if my motherboard needs replaced.....
hiwye said:
I know you already solved your problem, but I thought for people like me, who have found this thread later on, I'd just sign up to XDA and post my fix.
I didn't want to do a hard reset, so I played around with the "Bluetooth-Share"-thing in the Android app manager.
I cleared the cache and the data, that didn't do anything, even after a reboot I couldn't get the Bluetooth toggle from beging greyed out.
After that, I found that button at the very top right, that is labeled as " Uninstall Updates" or something like that. I tapped it and tapped OK at the following prompt. Where the "Uninstall Updates" button was before, should now be a greyed out "Disable" button. Then you need to reboot.
Try to enable Bluetooth. The toggle should turn blue after a few seconds as usual. Bluetooth should work normally now.
I hope my post helped anybody, :cyclops:
-hiwye
Click to expand...
Click to collapse

Prodeje79 said:
I am not having any luck. My bluetooh stopped working after doing a hard reset. Please note I've never rooted or flashed a ROM, or unlocked boot loader or anything. My N4 and N5 have always been completely stock.
I've tried everything in this thread, except I am not sure what hiwye is talking about as I cannot find an uninstall updates. I went ahead and tried another factory restore/wipe and still have same issue. I hit toggle to turn Bluetooth on, it then immediately toggles back to off.
Just as a side note, my bluetooh was working fine until the factory wipe/reset. I did the reset in an attempt to fix a sim card slot issue, that is also still not resolved. Upon restarting my phone, I get "no sim card" message. I got a new sim card and also confirmed the sim card works fine in other phones..... i can turn off, pop it out and back in and boot it again. sometimes it will see the sim card again. It may take 20 times, but finally work..... I should probably start a new thread on the sim card thing, but wondering if my motherboard needs replaced.....
Click to expand...
Click to collapse
I get the same Sim card missing screen I have tried a new sprint Sim and same issue. They way I have been fixing it is to pop off back cover and where the vibration motor sits (stays attached to cover) I put my finger in the hole and squeeze the 2 parts together and hold tight till it finishes booting and it will see the card. I'm not sure what's exactly the problem is but it works as temp fix and will stay until the next reboot.
Sent from my Nexus 5 using XDA Free mobile app

31ken31 said:
I get the same Sim card missing screen I have tried a new sprint Sim and same issue. They way I have been fixing it is to pop off back cover and where the vibration motor sits (stays attached to cover) I put my finger in the hole and squeeze the 2 parts together and hold tight till it finishes booting and it will see the card. I'm not sure what's exactly the problem is but it works as temp fix and will stay until the next reboot.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
can you take a pic of where you apply pressure?
Any other issues? My bluetooth still doesnt work.

Prodeje79 said:
can you take a pic of where you apply pressure?
Any other issues? My bluetooth still doesnt work.
Click to expand...
Click to collapse
Only device so doing it and taking PUC not gonna happen let me look up some images and I'll post them its not that difficult if you have had the back cover off before its very obvious where motor is. The motor is literally just under the flash led. Pop off cover starting at the top and slowly down each side with a guitar pick there is a tiny bit of adhesive at the bottom of rear cover about where the soft keys are when phone is on. Peel that up slow and you will see the vibration motor stuck to rear cover. See the space it came out of and put finger in that hole. And other finger opposite the first one on the glass and squeeze.... Not crazy so you break screen. Don't take much pressure. Start light and boot it. Says no Sim, try again with a little more pressure. When it first happened I googled sh*t for 2 days and couldn't find a fix. And this worked when I tried and a few reboots after. I shut phone off or battery dies I gotta do it to get Sim recognized.
Sent from my Nexus 5 using XDA Free mobile app

Docarut said:
In Nexus 5 Settings>Apps>All>Bluetooth Share. There you might try Clear data and Clear cache.
Click to expand...
Click to collapse
Worked for me, thanks.

Mic not working in phone calls

Hey guys, I have an HD that I updated with SamuraiHL's RSDlite Keep Data script process, rooted, and unlocked currently on the CM11 nightlies. The issue I'm having is that a lot of times I send or receive a call the other end is unable to hear me. Sometimes turning on the speakerphone or plugging in the audio jack will suddenly allow me to be heard but if I go back to normal then they hear nothing again. Also this isn't always the case, sometimes they hear me fine without me doing anything but when I go to speakerphone or plug in headphones they aren't able to hear me.
Other times it works as it should. So far I've gotten this on every rom I've tried so far, namely Gummy rom the past week or so and I noticed it today on the CM11 nightly I'm on.
So does anyone have an idea on what could be causing this? I've not seen mention of this being a common issue for the new 3.4 bootloader, like the BT or popping sound issues for example.
Side note
Now I do use Xposed but I'm not sure if that is affecting it or not. I've not tested it with Xposed off for prolong periods of time but just turning off and making a few calls didn't repeat the issue so I reinstalled it which I was able to make some normal calls right after.
I have noticed that there are some issues between CM11 and Xposed that aren't there for Gummy, like CM's softkeys aren't themeable or able to have long press action set by Gravity Box and the Nav ring's 4th and 5th targets make the systemUI crash. I can't go without Xposed ( ) just for GB's app launcher (back button double press) and Xblast's Appbar which I find a lot better to use than some of the other apps of a similar nature.
here is a screenshot of my About Phone info if that helps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
using the GB custom key as I can't set recent button long press to open last app.

Jaysp656 said:
Hey guys, I have an HD that I updated with SamuraiHL's RSDlite Keep Data script process, rooted, and unlocked currently on the CM11 nightlies. The issue I'm having is that a lot of times I send or receive a call the other end is unable to hear me. Sometimes turning on the speakerphone or plugging in the audio jack will suddenly allow me to be heard but if I go back to normal then they hear nothing again. Also this isn't always the case, sometimes they hear me fine without me doing anything but when I go to speakerphone or plug in headphones they aren't able to hear me.
Other times it works as it should. So far I've gotten this on every rom I've tried so far, namely Gummy rom the past week or so and I noticed it today on the CM11 nightly I'm on.
So does anyone have an idea on what could be causing this? I've not seen mention of this being a common issue for the new 3.4 bootloader, like the BT or popping sound issues for example.
Side note
Now I do use Xposed but I'm not sure if that is affecting it or not. I've not tested it with Xposed off for prolong periods of time but just turning off and making a few calls didn't repeat the issue so I reinstalled it which I was able to make some normal calls right after.
I have noticed that there are some issues between CM11 and Xposed that aren't there for Gummy, like CM's softkeys aren't themeable or able to have long press action set by Gravity Box and the Nav ring's 4th and 5th targets make the systemUI crash. I can't go without Xposed ( ) just for GB's app launcher (back button double press) and Xblast's Appbar which I find a lot better to use than some of the other apps of a similar nature.
here is a screenshot of my About Phone info if that helps
using the GB custom key as I can't set recent button long press to open last app.
Click to expand...
Click to collapse
As of 7/17 the nightlies have BT fixed. as far as the mic issue that happened to me once after a dirty nightly flash. i didnt even reflash i wiped davlic and let apps restart and all was fixed. I dont use exposed so im not sure of the effect.

Jaysp656 said:
Hey guys, I have an HD that I updated with SamuraiHL's RSDlite Keep Data script process, rooted, and unlocked currently on the CM11 nightlies. The issue I'm having is that a lot of times I send or receive a call the other end is unable to hear me. Sometimes turning on the speakerphone or plugging in the audio jack will suddenly allow me to be heard but if I go back to normal then they hear nothing again. Also this isn't always the case, sometimes they hear me fine without me doing anything but when I go to speakerphone or plug in headphones they aren't able to hear me.
Other times it works as it should. So far I've gotten this on every rom I've tried so far, namely Gummy rom the past week or so and I noticed it today on the CM11 nightly I'm on.
So does anyone have an idea on what could be causing this? I've not seen mention of this being a common issue for the new 3.4 bootloader, like the BT or popping sound issues for example.
Side note
Now I do use Xposed but I'm not sure if that is affecting it or not. I've not tested it with Xposed off for prolong periods of time but just turning off and making a few calls didn't repeat the issue so I reinstalled it which I was able to make some normal calls right after.
I have noticed that there are some issues between CM11 and Xposed that aren't there for Gummy, like CM's softkeys aren't themeable or able to have long press action set by Gravity Box and the Nav ring's 4th and 5th targets make the systemUI crash. I can't go without Xposed ( ) just for GB's app launcher (back button double press) and Xblast's Appbar which I find a lot better to use than some of the other apps of a similar nature.
here is a screenshot of my About Phone info if that helps
using the GB custom key as I can't set recent button long press to open last app.
Click to expand...
Click to collapse
This happened to me as well tonight. I'm on the CM-11 7/22 nightly. I was talking to my wife just fine, and then switched to the speakerphone. The mic was working in both modes initially, but when I switched speakerphone off, she couldn't hear me. However, when I switched it back on, she was able to hear me again. I hung up, and called her back, and mic was working fine again with speakerphone off. Hopefully the issue is resolved in the next build or 2!

Now we have this issue on all ROMs with KK BL... ((
It happens if you connect headphones to device or switch to speaker during call...

St.Noigel said:
Now we have this issue on all ROMs with KK BL... ((
It happens if you connect headphones to device or switch to speaker during call...
Click to expand...
Click to collapse
Any idea what the source of the problem is? I wonder if it's hardware related or bootloader related since it's happening to all ROMs. That's a pretty huge bug lol.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app

Defective?Gnote acting weird, auto doing things then hangs up.Help!

Its been my second month with my gnote pro 12.2 and im starting to have problems. First there will be some random press on my screen, ramdom apps will just pop up even tho im not touching its icon. Letter "N" on screen keyboard sometimes doesn't work, when im typing very fast it'll skip the letter "N". When im sliding it side to side it'll bring up the whole slide page even tho im just using one finger. The slide effect won't go through, i have to slide the whole page from left to right or vice versa. The worst thing that i experience is its like its acting that something is tapping on the screen very fast you will see the icon up and down really fast and you really cant do anything to stop it but to wait until it hangs up. cant shut it down, back and task button doesn't work. Home button works but can't shut it down, itll just reboot it self.. It's driving me nuts coz basically i left my laptop at home so i have to work from my note and right now im working on a site.
My device is on full stock, i haven't done any tweaks on it. And im using the wifi version SM-P900. I recorded a video of my gnote pro 12.2 using my g3 and pardon me for the quality since i have to convert it coz the file is so huge. It is a long boring 8 mins video showing my device is acting weird.
TURN OFF THE VOLUME (i can't find android video converter that removes the sound).
0:44 - you can see that it change the highlited email even tho im not pressing anything.
1:02 - its brings up the whole page screen. Im just using 1 finger to slide.
1:20 - menu button doesnt work. It hangs a bit and pops up a balloon.
1:35 - this is where it started doing crazy stuff.
http://youtu.be/7S83-sHYd-c

Auto brightness on the camera of your phone made it hard to tell since the rest of the scene was too dark so answer these few questions: Do you have a case on it? Does that case turn on/off the screen when opened? If you do have a case have you tried reproducing the results with the tablet removed from it?
Sent from my SM-P900 using Tapatalk

Seems like it was protesting to having todisplay the image of the Apple building...
In all seriousness though, could you turn on 'Show Touches' under Developers options? (Tap build number 7 times under About Device if you can't find Dev options.) It may have phantom touches.
And try the above suggested solution of detaching the case if you're using one.

muzzy996 said:
Auto brightness on the camera of your phone made it hard to tell since the rest of the scene was too dark so answer these few questions: Do you have a case on it? Does that case turn on/off the screen when opened? If you do have a case have you tried reproducing the results with the tablet removed from it?
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
Thank you very much for the respo se. No i don't have the case for my note im using slid on pouch for 12" notebook to keep it safe i stead. I never accide taly drop it either. Im also having random error message like "can't arrange alphabetically" sometimes "internal server error". I also got very few apps installed si ce im usi g this device as my laptop, i needed every storage space of this device, what im using most is hancom apps and autocad also chrome, default email apps a d sometimes skype.
Im not gonna edit this message so you can actually see how letter "n" misses.
Im using the default screen keyboard of the device. Tho the problem is not present if im using bluetooth keyboard. Im planni g to do a factory reset but the problem is i can't do that till i got home.
I just hope that this is more on software issue than hardware issue. Also, it happen often but randomly so i can't figure out what apps causing it.

ShadowLea said:
Seems like it was protesting to having todisplay the image of the Apple building...
In all seriousness though, could you turn on 'Show Touches' under Developers options? (Tap b uild number 7 times under About Device if you can't find Dev options.) It may have phantom touches.
And try the above suggested solution of detaching the case if you're using one.
Click to expand...
Click to collapse
Yup, sure ill turn it on and observe, thanks for the idea.

That rules out the case issue. These tablets are sensitive to magnetic fields and will act up in the presence of magnets, that's why i mentioned it earlier. I was careful in how I asked because some will be in denial about whether or not their case has any magnets hidden within the case.
If your tablet is indeed showing phantom touches the next logical step would be to factory reset and observe the tablet for a while afterwards. You'd have to reinstall all of your software though so make sure to back up all of your files first. If you do go this route I'd suggest refraining from logging into your google account when you set up the device from a reset OR if you do log in, don't opt into auto backup/restore of the device. This will keep the device from installing previously purchased software making it easier to monitor it BONE STOCK to rule out the chance of your issues being software related. If you can do this and the tablet has issues bone stock then it could be a hardware issue with the digitizer . .

muzzy996 said:
That rules out the case issue. These tablets are sensitive to magnetic fields and will act up in the presence of magnets, that's why i mentioned it earlier. I was careful in how I asked because some will be in denial about whether or not their case has any magnets hidden within the case.
If your tablet is indeed showing phantom touches the next logical step would be to factory reset and observe the tablet for a while afterwards. You'd have to reinstall all of your software though so make sure to back up all of your files first. If you do go this route I'd suggest refraining from logging into your google account when you set up the device from a reset OR if you do log in, don't opt into auto backup/restore of the device. This will keep the device from installing previously purchased software making it easier to monitor it BONE STOCK to rule out the chance of your issues being software related. If you can do this and the tablet has issues bone stock then it could be a hardware issue with the digitizer . .
Click to expand...
Click to collapse
The only problem right now is i can't do that till next week. Or ill start to upload my files with dropbox and ill just borrow a laptop. My main suspect actually is google chrome, this month i think i receive 4 updates with chrome and since then i started having this issues. I really hope that this is just software issue, sammy cust service here in ph is absolutely ridiculous.
Thank you for giving me ideas

SpEaKeRb0xXx said:
The only problem right now is i can't do that till next week. Or ill start to upload my files with dropbox and ill just borrow a laptop. My main suspect actually is google chrome, this month i think i receive 4 updates with chrome and since then i started having this issues. I really hope that this is just software issue, sammy cust service here in ph is absolutely ridiculous.
Thank you for giving me ideas
Click to expand...
Click to collapse
If you suspect it's chrome, go to settings > application manager > all > chrome > erase data and cache, and then uninstall or disable it. (depending on the available options).
As for the keyboard, can you give swiftkey a try, see if that has the same issues?
Sent from my SM-N9005 using Tapatalk 2

ShadowLea said:
If you suspect it's chrome, go to settings > application manager > all > chrome > erase data and cache, and then uninstall or disable it. (depending on the available options).
As for the keyboard, can you give swiftkey a try, see if that has the same issues?
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
Yes i think that's the culprit. Im in the middle of backing up my files now coz i decided to go for a factory reset. Ill observe how my device will behave on full stock without users apps installed.
As for the keyboard, yes ill install swiftkey.. somehow it makes me ask myself, why the hell am i still using the default keyboard?
Anyway, thank you for all the inputs, ill give it all a shot.

After going back on full stock, no apps being installed, and testing for 2 days, sad to say but the problem still exist. Il give it another try and will flash stock rom, this will be my last resort and if things still not fixed, maybe its time for this beast to have its repair and vacation.