My nexus 5 suddenly stop being recognized by computer. Both media storage and picture storage mode. However it still charges when connected to computer. I tried different cables and different computers as well.
I didn't recive OTA yet, so i wanted to side load it. but its not possible without being recognize by PC.
I have tried usb debugging on & off, but still no luck.
Can anyone suggest any solution to this?
Is my device's micro-usb port get corrupted? Can factory reset help?
167
I have a very similar issue. I use air droid. this allows me to transfer files, like a rom, from my pc to my device via WIFI. Give it a try. Worst case scenario, it doesnt work for what you need. Best case, it does work. It doesnt hurt to find out
Related
Hi all, Ive had my captivate for about a week now and have been playing with it, I've been all over the web trying to figure out why I can't sync it with my pc Ive tried both my laptop with windows 7 and my desktop running XP. Nothing will work ive downloaded the drivers from Samsung's site and kies and kies mini with no luck. No matter what i do it says device not recognized windows has stopped the device and nothing shows up on the phones screen it just shows its charging, I'm guessing its something I'm doing but i just don't know what. Once I had so much trouble I connected a Samsung flight to my PC that's running XP and it worked just fine. Can anyone help me out i want to root the captivate so i can get take off all this att crap!!!
Did you mount the phone after plugging it into your computer? You should pull down the notification bar and it should give you the option to copy files to/from computer.
Also, set you usb settings to mass storage. It's in settings...can't remember where on stock.
Sent from my SGH-I897 using XDA App
Yes I have put the phone in all the different usb settings debugging,media player, mass storage, ask on connection, kies. When I plug it in the only thing that changes on the phone screen is its showing its charging it doesn't give me any option to mount. The same cable will connect my old Flight phone and that phone transfers files just fine. This really has me stumped.
You downloaded and installed drivers from this site? http://www.samsung.com/us/support/downloads/SGH-I897ZKAATT
This may sound random and stupid but are you plugging into a USB that is directly connected to the motherboard (back of the computer)? If you're on a laptop there is no way to test this...basically, there was some issues before of people not having their computer recognize their phone and the issue was too low of power from the USB.
Hopefully someone else can chime in as well. I'm pretty new to this too so I can only think of fairly basic things.
Ok. So, I go to put some new music on my phone...and when I connect via USB to my laptop it says "USB Device Not Recognized"...I click on that bubble and it says "Windows has stopped this device because it has reported problems". Bollocks.
The device is rooted and I am running TheShadowMan's KB5 DeOdexed custom ROM.
I tried three other PC's loaded with the right drivers. Deleted all the drivers and re-downloaded. Tried a different Micro-USB cable. Tried different settings in the phone. Got desperate. Tried Factory Reset. Tried Deleting all user data.
None of that crap worked.
I would just go back to stock...but since my PC isn't recognizing the phone at all...I have no way to do that. I'm almost positive it's the ROM (Or at least...it's the last thing on the list before faulty unit and sending it back in)...but I don't know how to fix that without being able to connect to a PC.
Anyone else run into this problem? Let's fix it together! YAY!
Thanks.
try a restore to your computer to an earlier date? worth a shot. I think theres a program that transfers wirelessly, you can try that. I use adb wireless from the market to run commands.
fknfocused said:
try a restore to your computer to an earlier date? worth a shot. I think theres a program that transfers wirelessly, you can try that. I use adb wireless from the market to run commands.
Click to expand...
Click to collapse
I'm 99% positive that it isn't my computer...it's obviously the phone.
I'll try the transferring info wirelessly thing...but it will be a temporary fix at best.
So...ended up talking to T-mo and doing an exchange. Still no clue what happened and they didn't really know either.
New symptom, however...
It only turns back on if the Micro-USB cord is plugged in...weird.
Anyways...feel free to leave a comment anyways...I still have the handset for 10 days and would love to try an solve the problem in case anyone else has the same problem.
Did you enable the USB debugging before? If you did, disable it and you can connect with you PC/laptop again.
Yeah, that was the first thing I tried.
I'll try and make this short. Phone charges fine on comp. or charger. Phone works some what fine. Bluetooth seems to be getting quieter and quieter, but thats not the main issue. WMDC isnt working. I uninstalled it and restarted, I downloaded a newer version, I even tried about 5 cables and still the computer isnt even seeing any device what so ever. I was going to task 29 and reflash but now I'm affraid if the phones not even being recognized. Is there some setting or something that happened to of gotten changed that block my phone other than the obvious -virus protection.
Using windows 7. Any help would be appreciated. Thank you.
Try a different usb port. I have had issues where the port I normally use for charging/syncing refuses to recognize my phone. I just use a different port and everything works fine. Even the first port starts working again. Windows 7 does seem to reinstall drivers again when I use switch ports, so patience is required.
Tried many different ports. Can't do a hard reset because : 1- I have some info and text that needs to be sync'd and : 2 my end button doesn't work anymore. Actually it was sticking so I kinda disconnected it. I would try to do a reflash from a SD card but like I said, I have stuff that I need sync'd and I'm not really sure if the phone just isnt going bad or software. I guess either way it wouldn't matter. Would like to learn how to sync with wifi.
I believe there is a wifi-sync method/program, but am not aware of the specifics. You could save your information to your sd card and simply use a usb reader to transfer the information that way. Or you can use the blutooth explorer on the phone to transfer to another blutooth device. Or I believe Google has a sync service so you can sync you information to your computers anytime and anywhere.
You can remap the "end" function to another key.
Your phone's usb port could have a cracked connection as mine disconnects while synced if I move the phone too much.
WMDC does not recognize the Mobile Device "MSW Vista and Later OS"
Try this procedure(s);
Settings, All Settings, Connections, USB Connections, clear the "Fast File Transfer" check mark under the Active Sync option. Restart the device and before connecting to the PC Double check to see if the the fast file transfer is still clear. then go ahead and try to see if your PC sees your device. Good Luck.
"ALEXANDER OF PERSIA"
I upgraded to Sky-ICS RC7.4 Speed yesterday and today. Obviously the USB mass storage was working earlier because I got the .zip file for the upgrade on the phone. Well, just a little while ago I tried to connect so I could pull those zip files off just to save some room and it won't connect.
I can charge the phone, the laptop(Windows 7) and the phone both make sound/vibrate when connected. BUT, with I go to "Connect storage to PC" it tells me to unplug the cable, which it hasn't before but I did it anyway. I unplug the cable press the connect button again it states to connect the cable, I do. Press the button to connect and I get the same result. I've tried enable USB debugging and try again and it states to disable, blah blah blah.
It's great that I can charge the phone via USB all day long but really sucky that I can't access any of my files via my laptop.
Anyone had this issue or know of any fixes that may alleviate this issue? I sure would appreciate your help.
FYI, USB drivers are installed on the laptop and reapplied after the the issue of not being able to connect USB mass storage...
update: I am able to see the two mounts in computer management on my Windows 7 machine but not able to access them through My Computer.
I was reading from other threads about a possible Windows issue, how I find it unlikely, but I did a system restore from an earlier date and that made no difference. It's still a matter of the phone connecting completely to the pc.
Also tried different ports and usb cables, no avail.
I could really use some input so that if need be I can access the files on the phone to either flash back to stock or at least modify the files I have on there now to let me be able to attach my mass storage. I'm liking the the rom it's just a few little things like this that are making me completely love it.
i have the same issue if i plug in to the front usb ports. no problems with the back and its only been since i updated to seans latest speed stripped ICS rom
I was having the same issues. I turned the phone off, took the battery out, and then restarted it. It worked.
mskiin said:
I was having the same issues. I turned the phone off, took the battery out, and then restarted it. It worked.
Click to expand...
Click to collapse
Correct; you need to reboot your phone because you probably connected / disconnected too fast and the phone is bugged out now.
I'm on 7.4 speed stripped and its working fine for me. Did you try installing the Samsung USB drivers exe in the dev forum?
Wont connect even on tablet
This is My also Case on my tablet. i cant connect to usb mass storage please help me what to do. icant remove the battery of my tablet and i only open it after 5 hrs so how?
kilopolki said:
This is My also Case on my tablet. i cant connect to usb mass storage please help me what to do. icant remove the battery of my tablet and i only open it after 5 hrs so how?
Click to expand...
Click to collapse
Now try in English.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
I think I've exhausted my options, hopefully somebody here has an idea.
From day 1, my TF300T has been unable to connect to a PC. At first I thought it was because one of my cats chewed on the USB cable before I could try (it still charged, just no PC connection) so I didn't do anything while it was still under warranty.
Since then, I've tried 3 different cables, multiple PCs and a Macbook, and I can't get anything out of it. It's not detected at all by the computer - no unknown device, no prompt for drivers, no device connected sound when I plug it in. No reaction on the tablet either, whether USB debugging is on or not. I also tried replacing the USB port on the tablet, but got the same thing. I doubt it's a driver issue since I'm not getting anything at all on either end of the connection.
It DOES connect to the dock ok, and all the dock functions seem to work. I've tried connecting the USB cable to both the tablet directly and the dock, and I get nothing from either port.
I'd really like to be able to flash custom ROMs on it, and I can't find a working way to root or flash it without a functioning USB connection. Could it be the third-party USB cables giving me problems, and if so, is there one that actually works? And if not, is this just a lost cause?