[ROM][UNOFFICIAL][ALPHA][s2ve/p] Cyanogenmod 12.0 - Samsung Galaxy S II Plus

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
Device-specific source code for the Samsung Galaxy S2 Plus are available from https://github.com/luk1337/android_device_samsung_s2vep,
https://github.com/luk1337/android_device_samsung_s2ve and https://github.com/luk1337/android_kernel_samsung_galaxys2plus-common.
Compatibilitiy Patches: https://github.com/luk1337/build_tools/tree/cm12
(Please give credit if you use them in your ROM and if you fix something, please submit patches.)
Do not submit bug on CyanogenMod issue tracker
Downloads
ROM: https://s.basketbuild.com/devs/LuK1337/CM12
Google Apps: For now, find your own package
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo)
Video playback
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues
screenrecord does not work
FM Radio does not work
Sometimes wake up causes music stutter
Video recording does not work
.wav playback does not work (.mp3 works fine)
SELinux is in permissive mode
Wi-Fi HAL (i.e. Scanning MAC Address Randomization) not implemented
Sim Tool Kit (STK) not fully working
Video in YouTube app sometimes freeze
Bluetooth headset isn't working
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Installation
Make a backup!
If you were on CM 10.1 or a stock ROM prior to 4.2, upgrade to 4.2.
Install ClockworkMod recovery with SELinux support
Reboot into recovery
Wipe data if coming from stock or another non-CM ROM (You may get a "staus 7" error if you fail to wipe.)
Install the ROM
Optionally install the Google Apps Addon
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again.
Changelog
20141116: Initial release
FAQ
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Can I use your ROM as a base?
http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Can contacts be saved to phone/SIM?
No. It is not supported in AOSP-based ROMs.
Can I send files over Wi-Fi Direct?
Yes, but you must use third-party applications. The implementation provided on Samsung ROMs is not an open standard. AOSP/CM does not provide a native way to send files over Wi-Fi Direct.
Can I mirror your ROM?
You're free to, but I will not list it in this post.
Is overclock (OC) available?
1.3 GHz OC is available in Settings -> Performance -> Processor (enable developer mode first). Higher frequencies are not enabled since benchmark does not show additional benefit.
Will feature X from a previous version of CM be implemented?
I don't know, probably will be, eventually. I don't really involve myself in the feature-set side of CM.
Will you add OTA support?
No.
I cannot add APNs
Make sure you set the correct MCC/MNC code, the APN will not appear otherwise. Also make sure to use menu -> save (back button means discard).
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Phone model (s2ve or s2vep):
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
ART Runtime:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
- CoolDevelopment, pawitp and other s2ve/p and i9082 devs
XDA:DevDB Information
[ROM][UNOFFICIAL][ALPHA][s2ve/p] Cyanogenmod 12.0, ROM for the Samsung Galaxy S II Plus
Contributors
LuK1337
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2014-11-16
Last Updated 2014-11-16

NOTE: I'm still building s2ve, I'll upload it later.

Can't wait
can't wait for test! so excited

Awesome
PLease dont forget the Non NFC edition.. keep up the good work

essuraj said:
PLease dont forget the Non NFC edition.. keep up the good work
Click to expand...
Click to collapse
you can easily flash P-recovery and enjoy the dev's work

Hy, please upload today a download link for CM12, i really want to try it as faster as i can. :fingers-crossed::fingers-crossed::fingers-crossed:

Sheldd said:
Hy, please upload today a download link for CM12, i really want to try it as faster as i can. :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
It will be uploaded today,just be patient!

Sheldd said:
Hy, please upload today a download link for CM12, i really want to try it as faster as i can. :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Buy me SSD or better PC then I would build it faster.

LuK1337 said:
Buy me SSD or better PC then I would build it faster.
Click to expand...
Click to collapse
Oh, sorry, i don't want to be ungrateful,but i'm really excited and i want to try it...:angel:

LuK1337 said:
Buy me SSD or better PC then I would build it faster.
Click to expand...
Click to collapse
First of all: thank you so much for this amazing work! I can't wait to try!
How long do you think will it take?
Because for me the day ends in 3-4 hours

So i can't add contacts to my phone or sim ?

About Gapps?
Thank you very much : LuK1337!
Does somebody know what Gapps we must use in this rom?

I think we can use this:
https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip

Newku said:
So i can't add contacts to my phone or sim ?
Click to expand...
Click to collapse
You can save contacts on Phone but not on sim.

NW2000 said:
I think we can use this:
https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
Click to expand...
Click to collapse
Ok. Thank you!

LuK1337 said:
You can save contacts on Phone but not on sim.
Click to expand...
Click to collapse
thank you very much luk

Can We flash with normal cwm, exept 6.0.5.1?

it looks pretty good.
i tended to think that we wouldn't get that soon cm12, but luk is the best dev,also,grand duos devs.
we wait for ur build uploaded.
thank you man.

LuK1337 said:
[*]Install ClockworkMod recovery with SELinux support
[*]
Click to expand...
Click to collapse
Does it work with PhilzTouch by hacky?

I can't wait :victory: :victory:

Related

[SM-T525] CyanogenMod 11.0 UNOFFICIAL nightlies: Tab Pro 10.1 LTE (picassolte)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.2 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* See post #2
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Links
CyanogenMod: (use latest build: cm-11-*): http://download.crpalmer.org/nightlies/picassolte/
* See second post for more details about the nightlies
CWM Recovery: (use latest build: cm-recovery*): http://download.crpalmer.org/downloads/picassolte/
* The ZIP cannot be flashed in recovery. You need to unzip it and then flash the .tar.md5 that it contains using odin.
Google apps addon: (use latest kk gapps)
Download: http://goo.im/gapps
Mirror: http://download.crpalmer.org/downloads/gapps/
Source Repos::
* vendor
* kernel
* device: tabpro-common
* device: picassolte
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Unofficial CyanogenMod 11.0 for PicassoLTE, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
Version Information
Status: Testing
Created 2014-06-18
Last Updated 2014-08-19
Nightlies
Nightlies:
Download:
SM-T525 (picassolte) nightlies folder
Known Issues:
* splash screen: On boot the screen will go black for 5-10 seconds (same for the cwmr) until the CM boot logo appears. This is just cosmetic.
* most of the bugs on JIRA for mondrianwifi.
Changelogs:
* Main CM changes (ignore device_samsung_mondrianwifi): cmxlog for mondrianwifi
* Tabpro common device changes
* Tabpro common vendor blob changes
* Picassolte specific device changes
The changelog contains all changes made to that branch. Each nightly will be tagged and looks like:
7cd5c0b (HEAD, tag: nightly-20140808, m/cm-11.0, github/cm-11.0) mondrianwifi: init: Configure minimum GPU speed
The tag(s) that say "nightly-xxxxxxx" indicate that all changes from this commit down are in that nightly. Therefore, you can see what has changed since a specific version by looking for all entries between your current night's tag and the one that you are going to download and install.
Reserved
The broken entry for the splash screen means that you will get about 5 seconds of a blank screen after the Samsung splash screen and before the CyanogenMod splash screen shows up. That's normal, albeit a little disconcerting.
This is still a very early build. Pay attention to what is broken before deciding that you want to use it.
What is working should be quite stable. It is based off of the work I've done on the 8.4 mondrianlte which is very solid.
edit; nvm, thought i read this as t520... damn exynos.
New build: 2014-06-20
* Major audio changes, fixes voice recognition
* Synced to latest CM code
Finally there's at least one good AOSP ROM for this tablet... I wonder why is the development so dead for it?
New build: 2014-06-22
* Fixes bluetooth
* Fixes camera (and camcorder)
* Fixes compass sensor
Great thing to see development for this 10 inch device! I have 1 question, how much does this one differ from the T520?
Sent from my L800 using Tapatalk
Cryonic90 said:
Great thing to see development for this 10 inch device! I have 1 question, how much does this one differ from the T520?
Sent from my L800 using Tapatalk
Click to expand...
Click to collapse
Very different. This is of very limited value for the t500 as it would need a completely different kernel and would be a very large effort.
New build: 2014-06-23
Fixes:
* caller id
* conference calls & call waiting
* keymaster firmware issues
All that is left is:
Broken:
* external sdcard
* splash screen
Unknown:
* lid switch
so I'm changing the title from ALPHA to BETA to reflect the progress.
Is anyone using this? I got a PM from someone saying that the last build has broken WiFi but no line else has mentioned anything being broken?
I can look into whether or not I posted a bad build tomorrow, but I wanted to confirm that people are actually running this?
Yay for a 10.1 LTE rom!
I'm holding out for when external sd card support is fixed, and I'll give it a go
Yap, same here...
sent from htc one...
New build: 2014-06-26
* external sdcard should be fixed
* audio improvements
* kernel changes from samsung's sm-t320 updates
* general cm upstream changes
Thank you. Installed and everything i have tried is working great.
My Kingdom for this on the WiFi version.
SomeGuyDude said:
My Kingdom for this on the WiFi version.
Click to expand...
Click to collapse
+ 1
Will exynos ever be supported?
Trust me to buy the only tab that doesnt get CM support! lol
$50 for CM on T520
jonlad1 said:
+ 1
Will exynos ever be supported?
Trust me to buy the only tab that doesnt get CM support! lol
$50 for CM on T520
Click to expand...
Click to collapse
Asked an answered numerous times... Not likely to ever get cm.
works great and no bug so far ...
Ty
Just one question : can you post the original deoxed samsung keyboard 4.0 because i prefer it ...
Thank you

[ROM][UNOFFICIAL][5.1.1][I9105/P] Cyanogenmod 12.1 [2016/07/21]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
Device-specific source code for the Samsung Galaxy S II Plus are available from:
https://github.com/andixlm/android_device_samsung_galaxys2plus-common
https://github.com/andixlm/android_device_samsung_i9105
https://github.com/andixlm/android_device_samsung_i9105p
https://github.com/andixlm/android_kernel_samsung_galaxys2plus-common
Compatibilitiy Patches: https://github.com/doriandiaconu/build_tools/tree/cm-12.1/patches
Do not submit bugs on CyanogenMod issue tracker
Downloads
ROM: https://basketbuild.com/devs/DorianDiaconu/CM12.1
GApps: http://opengapps.org
What works?
RIL (Calls, SMS, Mobile Data)
Wi-Fi
Bluetooth
GPS
Camera
Video playback
Audio (playback & recording)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Everything else not listed under "Known issues"
Known Issues
There are no major hardware issues
Installation:
Make a backup!
If you were on CM 10.1 or a stock ROM prior to 4.2, upgrade to 4.2.
Install ClockworkMod or TWRP recovery with SELinux support. Older CWM will result in a "status 7" error.
Reboot into recovery
Wipe data if coming from stock or another non-CM ROM (You may get a "staus 7" error if you fail to wipe.)
Install the ROM
Optionally install the Google Apps Addon
FAQ
Q: Can you include Feature X into your ROM?
A: No. This ROM will have CyanogenMod's feature set.
Q: Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
A: No. This is an AOSP ROM and cannot have TouchWiz applications.
Q: Can you include call recording?
A: No. CyanogenMod does not include call recording to avoid potential legal issues.
Q: What kernel does this ROM use?
A: A slightly modified version of the stock kernel, the source code is linked above.
Q: I've heard that Broadcom doesn't release source, how can you make this ROM?
A: Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Q: Can I use your ROM as a base?
A: http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Q: Can contacts be saved to phone/SIM?
A: No. It is not supported in AOSP-based ROMs.
Q: Can I send files over Wi-Fi Direct?
A: Yes, but you must use third-party applications. The implementation provided on Samsung ROMs is not an open standard. AOSP/CM does not provide a native way to send files over Wi-Fi Direct.
Q: Will you add OTA support?
A: No.
Video Review:
Reporting bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your:
- Phone model (I9105 or I9105P):
- Radio (baseband):
- CM version:
- CM Download URL:
- GApps version:
Did you:
- Wipe:
- Restore with titanium backup:
- Reboot after having the issue:
Are you using:
- A task killer:
- A non-stock kernel:
- CMSettings/Performance settings (other than stock):
- Other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
- @pawitp
- @CoolDevelopment, @LuK1337, @GHsR and other I9105/P and I9082 devs
If you like it, use it and don't forget to press the "Thanks" button or send me a beer via PayPal.
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy S II Plus
Contributors
doriandiaconu
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-04-19
Last Updated 2016-07-21
So what is new from the 15th January build??
insanix said:
So what is new from the 15th January build??
Click to expand...
Click to collapse
Dorian after update,rom freeze in samsung galaxy screen.
Nice job, i will try it now :fingers-crossed:
Edit: It's how anastasiszn said, phone freeze and "Samsung GALAXY SII Plus GT-I9105P" screen xD
I'll fix it today as soon as i get home
Sent from my GT-I9105P using XDA Free mobile app
anastasiszn said:
Dorian after update,rom freeze in samsung galaxy screen.
Click to expand...
Click to collapse
Yeap! Freeze in boot screen
I fixed it. Now uploading.
doriandiaconu said:
I fixed it. Now uploading.
Click to expand...
Click to collapse
Not fixed, still freezing at boot
Yes not fix
Στάλθηκε από το GT-I9105P μου χρησιμοποιώντας Tapatalk
Guys, it might've been a source bug.. It wasn't syncing properly. Now it looks ok.
I'm doing my homework tomorrow again.
*hint hint*
Hmm, downloaded the build last night, but no results, stuck at boot splash screen(the one that says the model name). I'll check it out today, see if it got fixed. Cheers!
EDIT: Nope, still keeps the splash screen. See if you can fix it somehow, i'd love to see the new build, really.
Booting issue fixed.
Sorry it took me so long. Now we have an up-to-date version of CM12.1. Enjoy!
Hello!
Just wondering if i can use this ROM for the non-NFC version of the phone (gt i9105)? If so is there any step that must be followed in addition to the ones already mentioned?
RaXeDge said:
Hello!
Just wondering if i can use this ROM for the non-NFC version of the phone (gt i9105)? If so is there any step that must be followed in addition to the ones already mentioned?
Click to expand...
Click to collapse
Yes you can. Flash nfc destroyer after flash rom
cracker12 said:
Yes you can. Flash nfc destroyer after flash rom
Click to expand...
Click to collapse
I tried it but got a status 7 error saying that the device is a s2ve and not a sv2ep. And could you also provide the link for the nfc destroyer? Thank you
RaXeDge said:
I tried it but got a status 7 error saying that the device is a s2ve and not a sv2ep. And could you also provide the link for the nfc destroyer? Thank you
Click to expand...
Click to collapse
Install twrp for 9105p and try again. Nfc destroyer: https://s.basketbuild.com/filedl/devs?dev=GHsR&dl=GHsR/galaxys2plus/NFC-DESTROYER_LOLLIPOP.zip
What changed in this version?
Hi Dorian,
Can you tell me what changed in this version, 28/5/2016
thx,
Rene
Can anyone connect to wps ?
Στάλθηκε από το GT-I9105P μου χρησιμοποιώντας Tapatalk
After a day of use my phone freeze when i open bassicaly apps like dialer or messaging and i need to take out my battery.

[ROM][Official][Nightly] LineageOS 15.1 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 15.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
SELinux works in permissive enforcing mode
You need at least OxygenOS 5.0 firmware, otherwise you'll get error 7 when installing the zip. Latest firmware is recommended.
Installation:
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Latest official TWRP is highly recommended: https://twrp.me/oneplus/oneplusthree.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 8.x Oreo
Version Information
Status: Nightly
Created 2018-01-23
Last Updated 2018-11-16
Frequently Asked Questions
When you're about to ask a question, read the FAQs below, otherwise it'll be ignored.
Rule: NEVER ask for ETA
Q: Can we port treble to our device?
A: NO, unless OnePlus supports treble in official OxygenOS. Treble is trouble, treble is fake news. From my point of view treble brings zero benefit to the device. You already have countless custom ROMs, treble won't bring more fancy ROMs to the device, it just brings endless trouble to device maintainers. The most important point is, some of our proprietary vendor blobs aren't fully decoupled from /system, so fake Treble won't achieve the same effect as Google announced, especially when upgrading to new Android versions via GSIs.
Q: It VoLTE working on our device?
A: I don't know. My carrier doesn't support VoLTE/VoWLAN, but I've added necessary IMS stack to the ROM, and there're actually some users reported working VoLTE. If it doesn't work for you, DON'T issue me, I'm unable to fix it. Notice: If you strongly believe your carrier does support VoLTE/VoWLAN but the toggle doesn't even show up in settings, tell me your carrier's MCC/MNC number (check http://www.mcc-mnc.com/)
Q: Please add support for sRGB/DCI-P3 as cm-14.1
A: Our kernel does support them, you can enable it via sysfs toggle: /sys/class/graphics/fb0/srgb and /sys/class/graphics/fb0/dci_p3, maybe some apps could help you do this easier. The frontend is WIP(in fact it's already under reviewing, will be merged soonDone)
Q: Please add xyz features or fix UI/UX related bugs/regressions
A: All feature requests and UI/UX related stuff should go to LineageOS JIRA: https://jira.lineageos.org, I only take care of hardware-specific stuff.
Q: Can you make my device bypass SafetyNet?
A: https://www.lineageos.org/Safetynet/
So... its start... official?
Yes!!! :victory: Going to try it out once I'm done with work
Nice work! Gonna install it asap and report any issues.
Device OP3T, not rooted, encrypted.
I list here whatever I am able to find:
Charging doesn't make a sound nor vibrate, no matter what settings.
Option to switch hw keys light on/off is missing (i know not real issue, but many prefer them off)
Display modes missing sRGB, DCI-P3
Thank you! Will install and give feedback after few hours.
EDIT:So far so good. Very good for an alpha. But we should wait for official to daily use i think.
Edit again: Official rollout has been started. Except some kernel issues(fixable with custom kernel), great rom. Okay for daily use, no crashes or random reboots. Thanks anyone who put work on it.
Sent from my OnePlus 3 using XDA Labs
twentyfourinc said:
So... its start... official?
Click to expand...
Click to collapse
Nope, not official. Look at Zip name.
After install this build TWRP 3.2.1-0 cannot mount data partition (it's has encrypted) without any error.
good
Another Oreo Rom....
dimon2242 said:
After install this build TWRP 3.2.1-0 cannot mount data partition (it's has encrypted) without any error.
Click to expand...
Click to collapse
I'm wondering if this is the f2fs loopback problem.
Is your data partition f2fs or ext4?
Sent from my OnePlus3T using XDA Labs
valimakik said:
Nice work! Gonna install it asap and report any issues.
Device OP3T, not rooted, encrypted.
I list here whatever I am able to find:
Charging doesn't make a sound nor vibrate, no matter what settings.
Click to expand...
Click to collapse
if you only find this bug, its like beta more than alpha, this is great.
thank you all developers!!
atoyu said:
if you only find this bug, its like beta more than alpha, this is great.
thank you all developers!!
Click to expand...
Click to collapse
So far only that, but i am work atm so i don't have time tinker with everthing.
but it really feels good even at this point.
valimakik said:
So far only that, but i am work atm so i don't have time tinker with everthing.
but it really feels good even at this point.
Click to expand...
Click to collapse
may i know which open gapps you flash??
atoyu said:
may i know which open gapps you flash??
Click to expand...
Click to collapse
Unofficial 8.1 gapps. I used aroma to choose apps that i use.
https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Srgb or dci-p3 working?
tashimotor said:
Srgb or dci-p3 working?
Click to expand...
Click to collapse
No, it doesnt have those options atm. And that what is in developer options won't do anything.
Can u try switch it on in kernel auditor app?
tashimotor said:
Can u try switch it on in kernel auditor app?
Click to expand...
Click to collapse
I am not rooted atm, i can check it out later today.
valimakik said:
Unofficial 8.1 gapps. I used aroma to choose apps that i use.
https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Click to expand...
Click to collapse
thx for the link, as open gapps didn't list 8.1 for download, can i use 8.0 gapps?
edit: after research , seems somebody have problems when flash 8.0 gapps on 8.1 rom, i try to flash 8.1 gapps.

[ROM] [UNOFFICIAL] LineageOS 14 for Meizu M5C [MT6737m]

LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- Make a backup of your important files
2 - Unlock bootloader with this guide
3 - Flash the TWRP, link here
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package ARM64 > 7.1 > Micro and below: visit OpenGAPPS
If during the gapps flash it gives you an error then in the TWRP terminal or on the adb shell you have to execute this command: "mkdir /tmp/bin"
Download:
Releases · XRedCubeX/android_device_meizu_m5c
Contribute to XRedCubeX/android_device_meizu_m5c development by creating an account on GitHub.
github.com
Working:
Boots
Storages
Bluetooth
Wifi
GPS - GNSS
Audio
NOT Working:
Camera
Hotspot
Offline Charging
Special Thanks
LineageOS
Moyster for device trees
Device Tree:https://github.com/XRedCubeX/android_device_meizu_m5c
Vendor Tree: https://github.com/XRedCubeX/android_vendor_meizu_m5c
Assim que possível, irei testar!
Hi Red. I was taking a look at the ROM repository on GitHub, and saw that the default branch is now named cm-13.1. So, are you now working on an Android 6.0 ROM for the M5c?
thiagosousa777 said:
Hi Red. I was taking a look at the ROM repository on GitHub, and saw that the default branch is now named cm-13.1. So, are you now working on an Android 6.0 ROM for the M5c?
Click to expand...
Click to collapse
I have a slight indecision, now I can not carry on the Custom ROM because I do not have the right PC but when I am able to compile it, I will evaluate which one can work better
XRed_CubeX said:
I have a slight indecision, now I can not carry on the Custom ROM because I do not have the right PC but when I am able to compile it, I will evaluate which one can work better
Click to expand...
Click to collapse
I see. I would say that in the long run Lineage 14 would be more worthwhile, since Android 6.0 is becoming outdated, with no support for some apps. But really, I just wanted a ROM to replace Flyme, and its bugs. Also, many of the apps I use don't work, or don't work right on Flyme...
These days I was taking a look at /e/ OS. I've been thinking about venturing into porting this ROM to the M5c. For me it would be a challenge, since I've never done this before. But unfortunately at the moment I also don't have a PC that meets the requirements to compile the ROM
thiagosousa777 said:
I see. I would say that in the long run Lineage 14 would be more worthwhile, since Android 6.0 is becoming outdated, with no support for some apps. But really, I just wanted a ROM to replace Flyme, and its bugs. Also, many of the apps I use don't work, or don't work right on Flyme...
These days I was taking a look at /e/ OS. I've been thinking about venturing into porting this ROM to the M5c. For me it would be a challenge, since I've never done this before. But unfortunately at the moment I also don't have a PC that meets the requirements to compile the ROM
Click to expand...
Click to collapse
I find it useless, just use lineage without gapps and it will be better than /e/, then anyway I don't know where to find the manifest
XRed_CubeX said:
I find it useless, just use lineage without gapps and it will be better than /e/, then anyway I don't know where to find the manifest
Click to expand...
Click to collapse
You are right. However, /e/ has some nice features like e account synchronization, an app store, microG, and some of their apps... Of course we could get that with LineageOS, but it is interesting how /e/ already brings that well integrated and ready.
By the way, I am also looking at other non-Android systems, like Ubuntu Touch...
thiagosousa777 said:
You are right. However, /e/ has some nice features like e account synchronization, an app store, microG, and some of their apps... Of course we could get that with LineageOS, but it is interesting how /e/ already brings that well integrated and ready.
By the way, I am also looking at other non-Android systems, like Ubuntu Touch...
Click to expand...
Click to collapse
Ah beautiful those non-android systems yes, unfortunately we have to forget them because of the prebuilt kernel and unavailable sources
XRed_CubeX said:
Ah beautiful those non-android systems yes, unfortunately we have to forget them because of the prebuilt kernel and unavailable sources
Click to expand...
Click to collapse
Well, from what I've been reading the process is similar to porting LineageOS. You just need the kernel sources and the device specific binary blobs. I'm guessing you know how to get them, don't you?
And the interesting thing is that there is a layer, called Halium, that interacts directly with the hardware. And that is actually what you should port to the desired device. Then you can install any Linux system on top of this layer, like Ubuntu Touch, Plasma Mobile, etc, and these are distributed pre-compiled.
thiagosousa777 said:
Well, from what I've been reading the process is similar to porting LineageOS. You just need the kernel sources and the device specific binary blobs. I'm guessing you know how to get them.
And the interesting thing is that there is a layer, called Halium, that interacts directly with the hardware. And that is actually what you should port to the desired device. Then you can install any Linux system on top of this layer, like Ubuntu Touch, Plasma Mobile, etc, and these are distributed pre-compiled.
Click to expand...
Click to collapse
Mhh ... good, you are informed, however the vendor blobs are bull**** to take, the problem is the kernel sources but Meizu has not released them. However, some time ago I booted a Custom kernel based on ALPS (A custom AOSP from Mediatek to be clear) but the touchscreen doesn't work and I'm looking for a solution around but that I can't find
P.S: Fixing that kernel has great potential, forget android 7, you could also boot android 9 with sources, but as long as they are still working
XRed_CubeX said:
Mhh ... good, you are informed, however the vendor blobs are bull**** to take, the problem is the kernel sources but Meizu has not released them. However, some time ago I booted a Custom kernel based on ALPS (A custom AOSP from Mediatek to be clear) but the touchscreen doesn't work and I'm looking for a solution around but that I can't find
P.S: Fixing that kernel has great potential, forget android 7, you could also boot android 9 with sources, but as long as they are still working
Click to expand...
Click to collapse
I confess I didn't quite understand one thing: so how did you port LineageOS to this device? You didn't need the kernel sources?
thiagosousa777 said:
I confess I didn't quite understand one thing: so how did you port LineageOS to this device? You didn't need the kernel sources?
Click to expand...
Click to collapse
At the time I was doing this lineage, I was with the prebuilt kernel, week ago I had done this kernel port to a twrp and the touch was not working so I left the device alone
XRed_CubeX said:
At the time I was doing this lineage, I was with the prebuilt kernel, week ago I had done this kernel port to a twrp and the touch was not working so I left the device alone
Click to expand...
Click to collapse
Thanks for the clarification! It is a shame that Meizu does this (I wonder if they are not violating the terms of the Linux GPL license by distributing the kernel without publishing the modifications made to the source code).
Anyway, if a solution to this kernel problem related to the touch screen comes up, please let me know. In the meantime I'll keep reading Halium's documentation until a solution comes along, or until I get a compatible phone.
Great work!
Hello. I've been testing this ROM on my M5c and love it. The ROM is very good, fluid, lightweight... the only problem is that the camera doesn't work, as well as the cellular network data. Congratulations for the excellent work.
The ROM will no longer receive bugfixes?
pls compile
publish a release

Development [ROM][Official][Weekly] LineageOS 19.1 for Edge S / Moto G100

LineageOS is a free, community-built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 19.1 builds for Edge S / Moto G100. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes an Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
I have not implemented dynamic model detection yet, so the displayed model is always "Edge S" regardless of your actual hardware, this is not a bug.
Installation:
https://wiki.lineageos.org/devices/nio/install
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
Special thanks to Electimon, this work is heavily based on his prior ones.
......
Changelog & Download:
2022/2/20 initial release:​https://yukomoe-my.sharepoint.com/:...NPj4EdAKJwWzcBuIHXiDPzmHiNUB05M37v-Q?e=cUvmJQ​
Video over LTE (ViLTE) probably doesn't work
2022/3/13:​https://yukomoe-my.sharepoint.com/:...hPgpSvGHD7EuUBsAbKHzrf_9ppXNgZVLT5wg?e=0ZdHA4​
Sync latest source and update to Android 12L
2022/3/20:​https://yukomoe-my.sharepoint.com/:...BOs1iw7RXB0BIBbBDtvTA9T96hu4wmM0Z2_g?e=9mDL0e​
Sync latest source
Fix Wifi display
Fix status bar height for certain apps
Add indicator for fingerprint sensor
Less aggressive high refresh rate scheduling
Display color composition tweaks
Other minor changes
2022/3/21:​https://yukomoe-my.sharepoint.com/:...ZOo1OD0OKzDakB8OVvEsdgCJodeQh0d77r5Q?e=FKUfy7​
Emergency fix for crash when recording fingerprints for the first time
2022/3/27:​https://yukomoe-my.sharepoint.com/:...9Ai-nTJsfs95EBs2qLuwuRCyppY0KGRa8XLQ?e=cRjujv​
Sync latest source
2022/3/27 and later official release:​https://download.lineageos.org/nio​
The size of ZIP file only 746M? i remember the size of 19 alpha version is 2G.
Thanks
seems to work good!
was unable to enter recovery using the official LOS recovery but using Electimons LOSRecovery the install went ok
Nice.
Very good ROM, but few points:
1. Location not working
2. Please allow fingerprint unlock only when power button is pressed, like in stock ROM.
3. Please allow three finger swipe screenshot.
delete
dianlujitao said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
Click to expand...
Click to collapse
This is the same phone for this build correct? I ask because the information on the pages are completely different.
Motorola Moto G100 - Full phone specifications
www.gsmarena.com
Info about nio variants | LineageOS Wiki
wiki.lineageos.org
Ryu945 said:
This is the same phone for this build correct? I ask because the information on the pages are completely different.
Motorola Moto G100 - Full phone specifications
www.gsmarena.com
Info about nio variants | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
I Don't quite get your question
the links both refer to the moto g100/Edge S codename "nio" phones
there is no notable difference between device descriptions between the links
and yes this build is for that phone
henkery said:
I Don't quite get your question
the links both refer to the moto g100/Edge S codename "nio" phones
there is no notable difference between device descriptions between the links
and yes this build is for that phone
Click to expand...
Click to collapse
There is a difference in the stated amount of RAM and SoC used. I thought it could be an entry error but I wanted to make sure.
Ryu945 said:
There is a difference in the stated amount of RAM and SoC used. I thought it could be an entry error but I wanted to make sure.
Click to expand...
Click to collapse
ah I see what you mean now
the SoC stated is the same but there does not exist a 12gb version of the g100, this must be a mistake on gsmarenas side
henkery said:
ah I see what you mean now
the SoC stated is the same but there does not exist a 12gb version of the g100, this must be a mistake on gsmarenas side
Click to expand...
Click to collapse
Snapdragon 870 5G and Snapdragon 870 are not two different SoCs?
henkery said:
ah I see what you mean now
the SoC stated is the same but there does not exist a 12gb version of the g100, this must be a mistake on gsmarenas side
Click to expand...
Click to collapse
Pretty sure the 256gb version is paired with 12gb ram
Ryu945 said:
Snapdragon 870 5G and Snapdragon 870 are not two different SoCs?
Click to expand...
Click to collapse
yes ,it's same
does it not support matriel you?
dianlujitao said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 12, which is designed to increase
Click to expand...
Click to collapse
I unlocked the boot loader and installed the recovery in both slots. Then I told the bootloader to boot into recovery. It doesn't work. It just freezes. I just see it go the the Motorola log and freeze.
Ryu945 said:
I unlocked the boot loader and installed the recovery in both slots. Then I told the bootloader to boot into recovery. It doesn't work. It just freezes. I just see it go the the Motorola log and freeze.
Click to expand...
Click to collapse
Using whichever working recovery for the first install is okay. It's tricky to develop a universal working recovery image due to how a/b works.
Thanks for the new Build!
for the gapps users out there, you will have trouble finding a working gapps version as the sdk version has been upped and no public gapps package out there supports it yet but you can workaround this by just changing the supported sdk to 32 in the gapps props file
Is location working now?
los19.1 bug found:wifi display not working,plugs device and boot the phone,usb will not working
[20.03.2022]
So I'm after my first tests and:
1. texting/calling/internet wifi/5g works
2. the speed is very good
3. gps is catching relatively fast, you have to wait few seconds in application
4. turn to mute (gesture) - there is no vibration reaction that phone is muted.
I haven't noticed any bigger bugs, we will see how it will behave during the day,

Categories

Resources