Database Info

[Q&A] [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014)

Q&A for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Lord Boeffla said:
Hi all,
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
Update zzmoove to version 1.0-beta1 (credits to ZaneZam)
Update exFat driver to 1.2.9
Update the flash binary in the boeffla-kernel-reset recovery script, bump to version 3.1
Enjoy
Andi
Click to expand...
Click to collapse
It sjust awesome

help to find kernel n8013
Someone.. anyone.. where can i find this kernel ? a download link would great.. thanks in advance..
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014

As always... Read the op.
Then you will see everything is here:
www.boeffla-kernel.de
Andi

hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk

Araragi said:
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Hm... are you talking about leaving Boeffla-Kernel or moving to Boeffla-Kernel?
If you leave Boeffla-Kernel, you do not need to use any cleaner script. Boeffla stores everything under /data/.boeffla, and this cannot be used by any other kernels.
If you move to Boeffla, also usually no cleaning before required.
Only exception: If you were on a kernel before that stored all his configuration into init.d scripts, then you should cleanup your /system/etc/init.d folder before flashing Boeffla.
That's all however.
Andi

Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through

w_ayon said:
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
Click to expand...
Click to collapse
All you need is on the homepage, as stated in the OP of all kernel threads.
www.boeffla-kernel.de
Andi

ALL: Google is again playing games and locked down the first of my 3 donation apps in Playstore. Of course no compelling reason provided.
But as I already prepared for that half a year ago, I would like to remind you to use your personal unlock key to gain donation functionalities.
If you have not yet generated (this can be done in the donation app itself) and entered it into Boeffla-Config, it is now urgent to do that!!!
I cannot ensure Google will not lock down the other two donation apps as well soon, so you should be prepared now.
From my side, next Boeffla-Config app version will not support these donation apps anymore but only personal unlock codes.
Also, I will replace remaining donation apps in Playstore very soon (today or tomorrow) with a dummy app that tell users to get in touch with me manually.
Thanks for understanding... and alohas Google, all done wrong, guys there.
Cheers
Andi

Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.

sarvar97 said:
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
Click to expand...
Click to collapse
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi

Lord Boeffla said:
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Click to expand...
Click to collapse
Thanks a lot, the kernel is fantastic.

Hi from Russia. Excellent operation! I tried to pay, but my payment system of it doesn't allow to make. Sorry. The kernel for N8000beta5 isn't set through TWRP2.8.3.0 "error bynary". I set through Odin. Everything is great. Good luck!

And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi

Lord Boeffla said:
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Click to expand...
Click to collapse
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!

Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
But this is unexplainable then... the flash binary has not changed for more than half a year.
However I got to know in the OnePlus One thread, TWRP seems to have introduced some issues lately. But never used TWRP myself, so it is just second hand information I have seen.
Andi

Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
Ah, but can be something else.
In order to avoid people are flashing wrong kernels, I put asserts in.
Could you please just boot your tablet and look in /system/build.prop file what the entries are there for:
ro.build.product
ro.build.model
ro.build.device
Many thanks
Andi

Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi

Lord Boeffla said:
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Click to expand...
Click to collapse
I redownload N8000beta5 of 31.01.2015. Now everything is good. The kernel is set through TWRP and Philz. Gnabo v8 firmware. Thanks! Good luck!

problem with boeffla kernel v3 beta 6 for samsung note 10.1 (n801x)
Hi ! I am using the samsung kitkat stock rom 4.4.2 rooted in a samsung galaxy note 10.1 (n8010). First time trying a kernel. I have tried to install the boeffla kernel mentioned in the title, both via odin and trwp, but i have the same problem once installed... when rebooting the tablet it just stays in a black display after the "samsung galaxy note 10.1" title. It just does not start, i have to boot in download mode and reinstall the stock rom via odin. Help please! I would like to try this kernel in my tablet ! Thanks!

[Q&A] [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]

Q&A for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

bootloop problem after flash the kernel
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?

Curiosity
This is the only android based rom that works on my hardware bricked Nexus 5 (moisture maybe); Sailfish, B2G and Ubuntu Touch works too, but the stock rom and other android based roms screen locks as soon configuration starts (usually touching in "next" after selecting language). I sense that porting the FLymeOS's app settings/configuration could reach any other rom run or something... Any ideas?
Thanks in advance, and sorry for my poor english

M_Nexus5 said:
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Click to expand...
Click to collapse
You should use ElementalX CM version

Vpabc said:
You should use ElementalX CM version
Click to expand...
Click to collapse
Yes that is what I used, I download it from the this thread so shoud is for CM
And also I tried with the new version 1.12, I download it from ElementalX page, the link was under the CM section ! But same problem, my device go into bootloop !
I have other question please, I changed the dpi of play store to 480 by using the Xposed module, but still I can't get some of Apps when I use the search box of play store !
Shoud change the whole dpi of system & applications or need to change another google app to solve this problem ?!
Thaaanks for helping

This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem

Vpabc said:
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Click to expand...
Click to collapse
thanks, we are waiting for the next version

is there update in the soon
or developers left him ...

Flyme OS not working on my Nexus 5
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!

sp268_simple said:
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
Click to expand...
Click to collapse
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps

ferozzzz said:
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
Click to expand...
Click to collapse
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...

sp268_simple said:
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
Click to expand...
Click to collapse
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)

ferozzzz said:
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
Click to expand...
Click to collapse
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..

When update to flyme4

Problems with immersive mode on fullscreen games
Hi. I flashed Flyme OS a couple of days ago, and I have to say I am loving every single moment of this. Love the interface, love the speed and even the battery life is pretty impressive compared some other ROMS!
Although, I have been experiencing an extremely annoying bug with fullscreen games. I play COC on my phone on a daily basis and when I open the game, the onscreen buttons (Back, Home and Recent) buttons don't disappear like they are supposed to on android 4.4. They stay fixed and visible.
Now, I normally wouldn't mind this, if the full game interface is visible. The problem is that the onscreen buttons are fixed on top of the game, which means that part of the screen is hidden behind the buttons. It is really difficult. I tried a couple of stuff I found on google to fix it.
The only thing I found closest to a fix is to disable the whole onscreen buttons thingy by setting the value of "mu.hw.mainkeys" to "1" in "build.prop" file. Then I installed the "PIE CONTROL" app by "coolace" from the Playstore. It have been working really well for now. But, since it includes installing an external app, which takes up more memory to run I was hoping you guys could look into this and suggest a way to fix this. I like to keep my device clean without installing too much extra applications!
Other than this little problem, I find this as a very top notch ROM. Good work to the developers. Keep it coming
Hope to hear from you guys, and I look forward to newer versions of this ROM, especially one ported with the latest Lollipop release!
Thank You.
---------- Post added at 03:14 PM ---------- Previous post was at 03:06 PM ----------
sp268_simple said:
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
Click to expand...
Click to collapse
I had this problem at the beginning too. But, I downloaded the latest PA Gapps pack and installed it. Worked like a charm after that!
Here is the download link:
http://d-h.st/qOq
This is the PICO package, which means that it will only install the most basic gapps like playstore and play services that you absolutely need to run the system properly! You will have to download the other apps like Gmail and Hangouts from paystore.

Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle

JalmiNyondong1933 said:
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
Click to expand...
Click to collapse
Yes. I installed after lollipop update. Got that error in the first try too!
When flashing the lollipop update, you flashed the hhz12d bootloader. All you have to do is flash the hhz11k bootloader using fastboot. Worked for me after that.
Here is the link where I downloaded hhz11k bootloader:
http://downloadandroidrom.com/file/Nexus5/bootloader/bootloader-hammerhead-hhz11k.zip
:good:

he means cm11. Its work, really, writen now, from flyme, with stock 5.0 and multirom

[EDIT: MY PREVIOUS QUESTION WAS ALREADY ANSWERED] [IGNORE THE ATTACHED IMAGE]
hi my friends! I have 2 questions:
1. I can't make the app "operadora ddd" work with this rom for some reason.
2. Fullscreen mode is definitely broken
Is it normal?

very good
today I used it very good..

[Q&A] [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]

Q&A for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

update
So how do i update this rom im on 4.4.4l version 6.1 moto g and are u guys going to make one for android l just wondering love this rom best one ive had for this device

about validus
in case the maintainer finds this post, testing the latest milestone (6.2) on falcon (moto g, european version), found a few bugs :
- the setting to disable wifi in profiles and power saving mode for the battery (in the void options) is just ignored. When disabling wifi manually, it comes back everytime I exit the lock screen (maybe it's because of another setting but I couldn't find it).
- in sound option, music effects shows viper audio. When clicking on it, it proposes to install its driver automatically. Except that it doesn't work, since there is no log it's hard to know why. I tried the 3 proposed driver, to reinstall busybox (from the playstore), nothing worked.
- And the touch screen suddenly stopped working in 1 situation, I don't know why. I received a mail, when I tried toclick the screen it didn't work, and I couldn't use the touch screen anymore even after puting the phone to sleep and wake it up again, so I had to do a hard reset (power button pressed for a few seconds).
I'll try to keep on using it, but if the touche screen bug comes back I guess I'll have to do something... maybe try another kernel then, it seems related to the kernel...

http://forum.xda-developers.com/showpost.php?p=57054547&postcount=112
This 6.2 MS is built with what version of DK kernel? 1, 1.1 or 2?

Everything else works fine atm.

request
I just want to say that i have been using this rom as my daily driver since 2 days. no major bugs..
just wanted to request that the theme of the settings app should be changed back to the material white again. thank you

I'm using validus 5.0.2, build date says Jan 1. I noticed in a post you said you added the option to change nav bar dimensions, but I don't see it anywhere. Also "performance" under settings is empty.
I guess the questions asked here are of so little importance they don't deserve to be answered...

Can't post screenshot.
Groups still themed white text on white BG.

Rom, gapps, kernel so anything else I forgot to install apart from these?

Boost xt1031
Are You Going To fix Moto G xt1031 CDMA Data, Calls And Text Soon?

I just flashed latest build 1/14/2015 but WiFi not turning on pls help meh alone with ROM I flashed su and donkey kernel nothing helped meh

no Pie control in new build ?

Moto g consumer cellular xt1034 lollipop
anyone please let me know, I have MOTO G CONSUMER CELLULAR XT1034 UNLOCKED Device can i install original LOLLIPOP for my device (NOT ROM)

dracula1520 said:
no Pie control in new build ?
Click to expand...
Click to collapse
The latest build does have pie control, and I love the look of it. Although, I can't figure out how to configure 2nd layer buttons.

Boot loop
Hi guys,
thanks for this ROM but...
I can't understand.... is it for xt1032?
Cause I tried to flash latest build (v7.0) and it stucks on the boot logo... waited for 20 minutes...
any suggestions?

in latest build I cant find PIE controls. Maybe you forgot to include them? Apart from that thanks validus team for this awesome rom! Yesterday I made the jump from milestone 6.2 to lollipop and I am impressed

@koradiavatsal
Just reporting...
Bootloop after flashing the latest version with or without gapps.

koradiavatsal said:
A new test build
This will probably boot. Please confirm
Click to expand...
Click to collapse
@koradiavatsal Yup, boots all right!

@koradiavatsal I've just downloaded the latest version, I'll report back ASAP.

[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014

[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Q&A for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i need help
Az-one786 said:
here you go... http://forum.xda-developers.com/showthread.php?t=2397942
you can choose between micro/nano/pico
Click to expand...
Click to collapse
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(

mohammad jarrah said:
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
Click to expand...
Click to collapse
I think u should put your questions here http://forum.xda-developers.com/showthread.php?t=1877166
This topic is only for LiquidSmooth questions
About your question: Install BMM and do partition stuffs then you will be able to install 4 more custom ROMs on your phone :fingers-crossed:
But first, read this great tutorial (including videos)
http://forum.xda-developers.com/showthread.php?t=2602229

System 6 Error when loading Nano/mini Gapps on LS v32 Atrix2
I got brave today, after much reading on the forums and watching Tech ArnY rooting videos and BMM 0.3.4 - Great information.
Here are the steps that I took today and their results:
1.) Rooted the Atrix 2 MB865 (AT&T) that has OTA ICS 4.0.4 ROM. Rooting was successful,
2.) Post install of MBB 0.3.4 and SuperUser, I kept the ICS 4.0.4 ROM on System 1 of the phone.
3.) Next, following Tech Arn Y's teaching, I was able to successfully flash LiquidSmooth (AcePort-LS-KK-Milestone-3.2-edison.zip) onto System 3 post wipe clean /dalvik, et cetera and successful install.
4.) So far, so good. Next I attempted to load GAPPS from this link (http://forum.xda-developers.com/showthread.php?t=2397942). Again, post check of MD5 check sum for both mini and nano GAPPS - no issues.
5.) While attempting to flash either the mini or nano GAPPS onto the Atrix 2 into System 3, it shows the following (E: Error in /ext/pa_gapps-modular-nano-4.4.4-20141121-signed.zip) (Status 6) Installation aborted.
6.) I can boot into either ROM without issues, however, even after a reflash of System 3 and again successful install of LS-KK-Miestone 3.2, GAPPS gives Status 6 install error.
Looking for clues in these forums, but I have not come across anything yet. Any/all help would be very much appreciated!

@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.

1BadWolf said:
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
Click to expand...
Click to collapse
Thanks 1BadWolf for the reply. At first, I thought that the size of the GAPPS was perhaps the issue, but it did not end up to be the case. After continuing my search in XDA Forums (a wealth of great information here without doubt!), I stumbled upon a video that explained Status 6 and Status 7 errors which are the most common when flashing GAPPS post ROM into any phone. In my case, here is the summary of the events:
1.) Flashed pa-gapps mini 4.4.4 (at 229 mbytes ) - Status 6 error.
2.) Wipe clean System 3 and then flashed pa-gapps-nano 4.4.4 (at 120 mbytes) 2x - Status 6 error.
3.) Being somewhat frustrated, and yet challenged, I took the clue for the status 6 error and by chance, I grabbed the Slim_mini-gapps 4.4.4 (at 65 mybtes) - Gapps successfully loaded!
4.) Wanting to confirm whether the issue lives in the size of the GAPPS - or - something in one of the scripts (Meta-INF > com > google > android > update-binary or update-script), I went ahead and did another Wipe-Clean and flashed Slim-normal-gapps 4.4.4 (at 183 mbytes) - Gapps successfully loaded
Summary: In business and in life, something a solution or a work-around is found and implemented without knowing the root cause!
Hopefully, the documenting of my journey here will be beneficial to someone down the road just as many of the posting in this forum have been (and continue to be) to me too!

I have installed this ROM on my Atrix 2.. Stable rom as mentioned.I just found one bug,i.e The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.

I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.

Expecting a hope..
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?

_partha_ said:
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Click to expand...
Click to collapse
parthapmc said:
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
Click to expand...
Click to collapse
Hey guys, thanks for trying out my Liquidsmooth port and offering your feedback. Unfortunately, I'm no longer able to work on the existing ports or even lollipop since development has completely died down.
This is because our current recovery, BMM isn't able to boot any lollipop rom and it's the only working one we have. All developers and supporters have moved on pretty much, so all you can do is just play around with what's there. I'm still kinda around with my A2, but don't have the time to do anything anymore since I've moved onto a newer device, work, life, etc.
If you want someone to blame for this, firstly blame Motorola for the locked bootloader and then blame Google for making 5.0 have enforced SELinux which is why we can't boot any LP rom. Aside from that, this device is amazing to have and I hope you all have a wonderful time with it.
Sent from the Ace's MB865 using Tapatalk

[Q&A] [PATCHROM] Miui v6 for GT-i9105/P

Q&A for [PATCHROM] Miui v6 for GT-i9105/P
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PATCHROM] Miui v6 for GT-i9105/P. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

not Import/Export contacts to the SIM-card&Show SIM contacts.
---------- Post added at 09:27 AM ---------- Previous post was at 08:54 AM ----------
not Import/Export contacts to the SIM-card&Show SIM contacts.

BUG
not accept to 64GB flash card , do not connect , offers formatirovaniya.Ispravit this bug

помогите
As ispravte bug flesch card to 64GB , firmware Accepted formatirovat.kakie it offers suggestions?

fdn mode not working!

Great.... thanks

Great rom
I used the rom few days on i9105 and it's awesome. Fast and less battery consuming. Nice features. Every thing is OK. some time force stops but overall the best rom. The few bugs in my device are
App store sub languages are not in English
Vedio not working
Titanium Back Up and xposed are yet to work.
Hands up for the hard work.
Thanks

Good job!
Best ROM I've seen. Amazing ram usage, no lags, beatiful ui. Thanks a lot!

how i do flash a new update plz?

Amr fego said:
how i do flash a new update plz?
Click to expand...
Click to collapse
As usual
1. Wipe data
2.Flash Rom & Gapps
3.Wipe data
4.Reboot system

Launcher bug?
Can't use other launcher as default. Any suggestions?
BTW great rom, i'm waiting for update cuz there are some annoying bugs. Miui rullz

Any News Update ?

Problem with selection network type
Hi @haky86 thnk for good work.. i want to tell you that there is a problem with network type selection. if i select 2g as network i can't change it . i've tried all but is impossible to resolve problem on the device...

Hi @haky86 good work!
1)But in status bar there are any toggle like miui v5
2)When change font it not change
3)Why there isn't android lollipop?
(Sorry for my english)
Tks!

i can't change Network type from 2G to 3G, Please Fix it

wsm/xposed problem on rom
I have a problem with Wsm tool and Wposed framework. When i install it and reboot the device i got a bootloop does anybody know how to solve it?

I have a problem with Wsm tool and Wposed framework. When i install it and reboot the device i got a bootloop how to solve it?