Notice (4/16/14): I'm no longer here. I've said "goodbye" to AT&T and their locked bootloader schemes. I'm voting with my wallet - I've sold my I337 and switched to T-Mobile. My apologies to the community, but you're now on your own here.
Intro/About/Requirements:
This thread started as a guide for people who wanted to run Ubuntu in a chroot, and then connecting to it locally with a VNC client. This method has been used countless times on other devices, with many thanks to @zacthespack and his his group, LinuxonAndroid. Unfortunately, this method did not work out-of-the-box on my device, so I tweaked things to work with the Galaxy S4 and posted them here in this thread.
However, the most people immediately noticed that with this method the performance is not great, and some applications can't work in a headless environment. With a comment made by zackthespack, I began researching what it would take to get Ubuntu to write directly to the device's framebuffer. After a few months, I not only managed to accomplish this, but also developed a way to get the Galaxy S4 to boot directly into Ubuntu. As far as I have seen, both of these are a "first" for this handset.
All of these methods require root. The VNC Chroot does not require a custom kernel, but the other methods require a custom-built kernel. For the I337 (AT&T) handset, this can pose a problem if you have bootloaders that are MF3+. If you're using MDB/MDL bootloaders still, you shouldn't have a problem with this and you can Loki the custom kernel without issue.
Depending on your ROM and/or Kernel, you may also need a new version of BusyBox installed, even for the VNC method. You'll find a few apps on the Play Store that can do this for you. Beware that some of them are not easily reversible (such as TinyBox), so if you're stuck on MF3 with no way to create/restore a nandroid/system backup, you should be careful.
Click to expand...
Click to collapse
Disclaimers:
Following this guide and/or flashing anything I've provided to your device is your own responsibility. If something breaks, you break your device, or something explodes, I can't be held liable (I'll help correct any situations you may put yourself in, however). I claim no rights to any proprietary software or intellectual property included in this post or the packages contained herein. By using any of this software, you agree to whatever licenses/agreements that the creators may have included with their software. If you use any of this stuff in your own project, please provide credit where credit is due. For example, if you take my u.sh script and adapt it to some new device (i.e. Galaxy S 5), please at least mention where it came from.
Click to expand...
Click to collapse
VNC Chroot Method (original):
This method is loosely based on this thread for the Galaxy S3 and the ubuntu.sh script there. It didn't work for the S4, but I've made several tweaks to it, simplifying it a ton, and otherwise getting it to work perfectly on my S4. I've tried this using my AT&T Galaxy S4 (SGH-I337) on both the MDL build and the MF3 build - both seem to work great.
Instructions:
Download the Ubuntu 13.04 Small v1 image here.
Create a folder on your sdcard labeled "ubuntu" by whatever means you want to.
Extract the ubuntu.img from your downloaded zip into this folder.
Download my version of the ubuntu.sh and place it on the root of your sdcard.
Open the script in a text editor and read through it. Never run a script like this on your android without first knowing what it does - especially when the author is telling you that you need root. If you're happy with it, proceed.
Install an terminal emulator of your choice. I personally used this one, and technically an adb shell will work too (but you'll be tethered to your PC...).
Install a VNC Client of your choice. I personally used this one, but there might be better/faster ones out there.
Open the terminal emulator, and execute the following commands:
Code:
su
sh /sdcard/ubuntu.sh
If you see a bunch of errors and get dumped back at the "[email protected]:/ # " prompt, then something went wrong. Report your errors in this thread. Remember, this requires root (and the "su" command to get there, of course).
You'll be prompted for some setup parameters, which you can save at the end for later. Just answer each question and press Enter after each:
You'll need to provide a new password for the "ubuntu" user. A simple passwords like "ubuntu" works, unless you want some security.
Start VNC server? (y/n) - always choose "y". We need this to interact with the device.
SSH server? Optional. If you use it, you should enable it.
Screen size: Enter whatever you want. I personally used 960x540 (one quarter of the S4's screen size) so that I could actually interact with things using the touch screen.
Save settings as defaults? - You might not want to do this until you have a screen size that works best for you.
Once you see the prompt, "[email protected]:~# " - you're in! You now have Ubuntu running in a chroot. As the on-screen instructions suggest, type "exit" at this prompt to end the chroot and Ubuntu. It is recommended to do this when you are done so that the ubuntu.sh script can clean up after itself (unmounting things, etc.).
Leave your terminal emulator app running! Use your Home button to return home and leave it running.
Open you VNC client and connect with the following settings:
Nickname: (whatever you want)
Password: ubuntu
Address: localhost
Port: 5900 (default)
Username: (leave blank)
Color Format: 24-bit color (you can use lower if you want better performance)
Connect. For the VNC app I used, I had to zoom in to make the screen fit correctly (use pinch-to-zoom, and then use the "+" button on-screen). Also, you can play around with the Input Mode some if you wish.
Enjoy Ubuntu!
As you can see, it's not terribly complicated to get this up and running. Once you have set it up the first time, it's a lot smoother from then on out. The script is designed to allow you to use the external SDCard if you wish. Just use place the ubuntu.img in an "ubuntu" folder on your external SDCard, drop the ubuntu.sh on the root of the external SDCard, and use "sh /mnt/extSdCard/ubuntu.sh" instead (don't forget "su"!).
Click to expand...
Click to collapse
Freedreno Chroot Method (NEW):
This long-winded tutorial will explain how you can setup Xubuntu-desktop in a chroot. Before attempting any of this, you should read through all the steps and be sure you're comfortable performing the steps needed.
This requires roughly 2GB free space on your /data partition - the actual finished install is about 1.4GB, but it will require some extra space while it installs Freedreno and other components. HINT: Keep in mind that your /data partition is shared with your internal sdcard (your internal sdcard gets whatever space is leftover at the end of the /data partition), so you can get an idea how much free space you have by looking at how much space your internal sdcard has available.
Instructions:
Step 0 (option A) - Build Custom Kernel
You will need to install a custom kernel that has specific options enabled in the configuration, along with a few patched files in the source code. This list of changes is based on a delta from the stock I337 MF3 kernel, available at http://opensource.samsung.com/. You should be able to apply these changes to "any" kernel that you can build from source, so this documentation may apply to devices other than the I337.
Kernel Mods:
Required config changes:
Code:
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DRM=y
CONFIG_MSM_KGSL_DRM=y
# CONFIG_KGSL_PER_PROCESS_PAGE_TABLE is not set
# CONFIG_MSM_KGSL_PAGE_TABLE_COUNT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_MSM_TRIPLE_BUFFER=y
CONFIG_FB_MSM_DEFAULT_DEPTH_BGRA8888=y
# CONFIG_FB_MSM_DEFAULT_DEPTH_RGBA8888 is not set
Fix for Wi-Fi problems when using MF3 kernel on UCUAMDL bootloaders (i.e. "unadulterated" or "neutered"):
Code:
CONFIG_PROC_AVC=y
Required Patches to kernel source code:
https://github.com/freedreno/kernel-msm/commit/4c0281745f8c85707be88acebb557aca0b8f1dba
https://github.com/freedreno/kernel-msm/commit/228f65d48d4855d903e3b4642179dfa14eedd040
https://github.com/freedreno/kernel-msm/commit/54b510b2e6bccf08fdf3a8ad00a62b27c2f8c1e6
Additional changes required for sudo to work (added 10-25-13 in v4):
Code:
# Samsung Rooting Restriction Feature
#
# CONFIG_SEC_RESTRICT_ROOTING is not set
# CONFIG_SEC_RESTRICT_SETUID is not set
# CONFIG_SEC_RESTRICT_FORK is not set
# CONFIG_SEC_RESTRICT_ROOTING_LOG is not set
Additional changes to the initramfs required for sudo to work (added 10-25-13 in v4):
Edit fstab.qcom, remove the nosuid, part of the line that references userdata.
Step 0 (option B) - Download Custom Kernel Instead
Don't want to compile your own kernel from source? If you have the I337, you can use mine! As mentioned above, this kernel is based on the original MF3 source from Samsung, with the modifications listed above. If you are stuck with MF3+ bootloaders on your I337, you will not be able to install this kernel directly (at the time of this writing). MDB/MDL bootloaders are fine, but you will need to flash loki-doki afterwards (this kernel is not pre-lokified!). This kernel might work with other similar variants (such as the M919), but I haven't tested this on anything except my own I337 daily-driver. YMMV. If you run into issues, you might need to wipe cache/dalvik. This will likely only work with TouchWiz-based ROMs (I have not tried it with AOSP). Here's some downloads for you:
mf3-freedreno-android-boot-v4.zip - CWM/TWRP flashable zip.
- Boots to android, allows Ubuntu with Freedreno to work in a chroot.
- Compiled with the original (slightly modified) MF3 initramfs and "mf3-freedreno-minimum-zImage-v4" (below).
- Includes minimal configuration changes described above, plus the WiFi fix part.
mf3-freedreno-minimum-zImage-v4 - Just the MF3 kernel itself with minimal changes to get the chroot to work.
mf3-freedreno-minimum-config-v4 - Yeah, that's right. I'm providing the .config files I used for all of this.
Step 0.5 - Install the Kernel
Before you can start up the chroot properly, you'll need to have the custom kernel installed. You don't want the "ubuntu-boot" version right now, because you don't have an Ubuntu install to boot to. If you're using my pre-built kernel, first flash mf3-freedreno-android-boot-v4.zip and then flash loki-doki.zip.
Step 1 - Companion Files
Download this file: mf3-freedreno-companions-v4.zip - Non-flashable zip. This includes the script files, which you should promptly read through both u.sh and launch.sh. It is always good practice to read through any script file you get from the internet, making sure it's doing what you would expect it to. Also check out CREDITS.txt, which includes information about the included upstart-dummy.tar.gz and start-stop-daemon files.
Extract the companion files .zip and place its contents on the root of your internal sdcard (/sdcard/). Don't extract the contents of upstart-dummy.tar.gz. This is your $src directory. You can change this if you wish (see script for details).
Step 2 - Install/Configure Ubuntu
Install an terminal emulator of your choice. I personally used this one, and technically an adb shell will work too (but you'll be tethered to your PC...). At the console/shell, type the following two commands:
Code:
su
sh /sdcard/u.sh bash
The script will download Ubuntu Core and install Freedreno, upstart-dummy, and lubuntu-desktop. Total download size will be around 425MB. Total install time will vary, but count on it taking at least 45 minutes to install and configure everything. At the very end, you'll be prompted to enter a password for the new user "ubuntu".
Step 2.5 - Exit ubuntu
When you see the message "Type 'exit' (without quotes) to leave ubuntu," the install is complete. You'll notice that your prompt changed to "[email protected]". This is the easiest way to confirm that you're actually inside the ubuntu chroot. Type exit and hit Enter to get back to android.
Step 3 - Fire it up!
From now on, you can start Ubuntu using u.sh in any of these three ways:
sh /sdcard/u.sh - This will make initial prep, STOP android (black screen), launch the chroot, install/configure if needed, and will execute "service lightdm start". This will give you the greeter and you can login as "ubuntu". If the lightdm service stops for whatever reason (see info about the home button below), the script will continue by exiting the chroot and rebooting your device.
[*]sh /sdcard/u.sh bash - Same as above, except that it will not stop android, not startx (will give bash shell instead), and will not reboot your phone when you exit the shell.
[*]sh /sdcard/u.sh destroy - This will do exactly as it sounds - destroy your ubuntu installation. This will unmount your /sdcard from ubuntu (if still mounted somehow) and then recursively delete your ubuntu installation. If you change the source or destination directories in the main script, you should be careful deleting things.
NOTE: Remember to ALWAYS run any these from a root shell, whether via terminal emulator, via adb shell, or using SManager (or similar).
Step 4 - Note the Home Button and Touchpad
Take note that any time you have X running via lightdm, the hardware Home button will kill the X server. This is intentional, and will exit the chroot and reboot your phone. You'll also notice that currently, the touchscreen acts like a giant touchpad (like on a laptop). Use two fingers to right-click or scroll. Direct touchscreen input is not available at this time due to a segmentation fault that evdev causes when used on this device in a chroot.
Step 5 - (optional) Make Changes and Do it All Over Again
Customize the crap out of it! Edit my u.sh, launch.sh or xorg.conf and have fun. If you find great improvements, please post them in this thread! In future revisions, I might include them. Things should be well documented within the scripts. You might even change the bit at the end of launch.sh that starts "service lightdm start&" instead of "startx" - this would give you the greeter and let you login as the user "ubuntu" if you want. Also note that those three files are the only ones that must remain in your $src directory if you wish to continue to run this as a chroot. By the way, booting directly to Ubuntu after it is installed does not require any of the companion files anymore.
Click to expand...
Click to collapse
Native Boot Method (NEW):
This part of the tutorial is for those who wish to take things a step further and boot your device directly into Xubuntu-desktop. This will require that you setup the Freedreno chroot properly, and then you'll be installing a new boot.img. While this doesn't replace your /system partition, you won't be able to boot directly into Android while you have this boot.img installed.
Instructions:
Step 1 - Install Ubuntu
Basically, you need to perform all the steps for the Freedreno Chroot method, and get that up and running first. All you're doing here is swapping out your kernel.
Step 2 (option A) - Build Custom Kernel
You'll need all of the kernel customizations included in the freedreno chroot method, plus these listed below:
NOTE: You will need some proprietary blobs, which can be found on your device in the /etc/firmware directory.
Config changes to enable booting directly into Ubuntu (beyond replacing the initramfs...):
Code:
CONFIG_EXTRA_FIRMWARE_="audience-es325-fw.bin a300_pm4.fw a300_pfp.fw vidc_1080p.fw"
CONFIG_CMDLINE="console=tty0 fbcon=vc:0-3"
# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_CMDLINE_EXTEND=y
# CONFIG_CMDLINE_FORCE is not set
Optional config changes to enable the framebuffer console when booting directly into Ubuntu - useful for debugging.
Code:
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
NOTE: You will need to grab some .ko files that are created, which must be loaded in the following order:
Code:
insmod /ko/font.ko
insmod /ko/softcursor.ko
insmod /ko/bitblit.ko
insmod /ko/fbcon.ko
I recommend that you include these four lines into the init script that is included in the ubuntu ramdisk. These can go pretty much anywhere after the ". /scripts/functions" part, but before it calls out to run-init. Also, don't forget to drop those .ko files into a new /ko directory in the initramfs. If you want to load these with modprobe, I'll leave that up to you (good luck).
Replace the entire ramdisk/initramfs:
At this time, I'm not going to provide instructions on how to do this. You'll need this mako boot.img straight from Ubuntu, repacked with the zImage created here. For what it's worth, the re-pack tool I'm using includes --cmdline 'androidboot.hardware=qcom user_debug=31 zcache', but I'm not sure if that's needed (especially considering our kernel seems to use qcache?). Anyways, good luck.
Step 2 (option B) - Download Custom Kernel Instead
Again, if you don't want to compile your own kernel from source, you can download mine and use it. The same warnings and restrictions apply as they do in Step 0 (option B) of the Freedreno Chroot method. And here's your downloads:
mf3-freedreno-ubuntu-boot-v4.zip - CWM/TWRP flashable zip.
- Boots to Ubuntu directly, but only if your Ubuntu install is located at /data/ubuntu (Default).
- Compiled with the original MF3 initramfs and "mf3-freedreno-everything-zImage-v4" (below).
- Includes all configuration changes described above.
mf3-freedreno-everything-zImage-v4 - Just the MF3 kernel itself with all changes for both chroot and direct booting to Ubuntu.
mf3-freedreno-everything-config-v4 - Yet again, I'm providing my complete .config file for this.
Step 3 - Install the Kernel
Here's the easy part. Flash your completed boot.img, flash loki-doki, and reboot. If you're using my pre-built kernel, first flash mf3-freedreno-ubuntu-boot-v4.zip and then flash loki-doki.zip.
Click to expand...
Click to collapse
Flashable Zip Method (NEWEST):
It's finally finished: a flashable .zip that you can use to dump a pre-built rootfs onto your data partition. This will still require that you flash one of the two custom kernels (whether for chroot or native booting), but it will allow you to skip the whole build/install process.
ubuntu-install-v4.zip - CWM/TWRP flashable .zip. Requires approx 2GB free space on your data partition during install, and the final install size is approximately 1.3GB (may want more free space to add your own programs/etc.). Output folder is /data/ubuntu. This can be changed in u.sh, but heed the warnings within!
Instructions:
Instructions for Chroot-style Ubuntu:
Download the "companions" .zip and extract its contents to the root of /sdcard.
Download the "ubuntu-install" .zip to your internal or external SDCard.
Download the "mf3-freedreno-android-boot" .zip to your internal or external SDCard.
Make a nandroid backup of your phone, and store it on an external SDCard or your computer. Always a good idea to have this.
Install the "ubuntu-install" and "mf3-freedreno-android-boot" .zip files, followed by loki-doki.zip if you need that for your device (e.g. I337).
Restart and resume with Step3 of the Freedreno Chroot Method.
Instructions for Native Boot Ubuntu:
Download the "ubuntu-install" .zip to your internal or external SDCard.
Download the "mf3-freedreno-ubuntu-boot" .zip to your internal or external SDCard.
Install the "ubuntu-install" and "mf3-freedreno-ubuntu-boot" .zip files, followed by loki-doki.zip if you need that for your device (e.g. I337).
Restart and let it start into Ubuntu!
NOTE: The username is "ubuntu" and the password is also "ubuntu" - it is highly recommended that you change this ASAP.
Click to expand...
Click to collapse
Known Issues/Bugs:
Below is the list of known issues that I can think of, from the top of my head. This will probably be updated later as everyone points stuff out. Some issues only apply to some of the methods, so the applicable methods are listed in parenthesis after each.
Sound has not been tested (freedreno/native)
3D graphics or OpenGL support has not been tested (all)
Some applications don't work in a headless environment (vnc)
Some applications don't like to run as root, such as chromium (freedreno) lightdm is working in companions-v3, so no need to login as root anymore
Onboard is not working (freedreno/native) fixed in companions-v3
sudo does not work (all) fixed in kernel-v4 for freedreno/native, but problem remains for (vnc) if you are not using a custom kernel
A few kernel Oops's (native)
Shutdown menu doesn't always work (freedreno/native) fixed partly in companions-v4 - proper locale settings seem to allow the shutdown menu to work once you are logged in
Performance issues due to VNC connection (vnc)
No 3G/WiFi/network connection that I'm aware of... (native)
No control over 3G/WiFi/network/bluetooth yet (all)
Xorg's normal touchscreen driver evdev causes segmentation faults (freedreno/native)
Working on a possibly trying to get fbdev to work natively without Freedreno for simplicity (freedreno/native)
Anything you'd normally expect from a phone does not exist (freedreno/native)
Screen rotation (with or without accelerometer) doesn't work yet (freedreno/native)
HDMI/MHL output remains untested at this time. I got it to briefly work once, but I need to revisit this. (freedreno/native)
Many more to come, I'm sure...
Click to expand...
Click to collapse
To-Do:
Add mirrors to the download links.
Add a CWM/TWRP-flashable .zip that just dumps a clean Ubuntu install onto your data partition. This should be easy enough. completed!
Fix some of the bugs above.
Simplify the launch.sh and xorg.conf files. The u.sh script seems pretty solid.
Develop a method that works with only fbdev. This method might eliminate the possibility of 3D acceleration, but should enable screen rotation and other nifty things.
Possibly look into getting kexec (or similar) to work on the Galaxy S4 to offer a dual-boot option. Low priority at the moment, because flashing a kernel back and forth is pretty easy stuff.
Get Ubuntu Touch to work. This would eliminate a lot of bugs. I mostly need to just buckle-down and build CM10.1 from source, and then slowly visit each step of the Ubuntu Touch boot process.... Ugh.
Rebuild Freedreno to try to get Mesa/Gallium3D working properly. I'm probably going to need a lot of help from Rob Clark on this one!
More to come...
Click to expand...
Click to collapse
Revision History:
[11-13] mf3-freedreno-companions-v2.zip - Updated launch.sh: added some error checking and fixed the Freedreno build process.
[11-15] mf3-freedreno-companions-v3.zip - Updated launch.sh to include onboard and English language. Removed florence and xvkbd. Removed .keyb script. Added sudo. Simplified upstart-dummy, and included new upstart-dummy.tar.gz. Prepped for new flashable .zip method.
[11-26] mf3-freedreno-companions-v4.zip - Updated launch.sh: included fix for onboard so that it should work anytime lightdm is launched, added some bits for sudo to work, and home button now kills lightdm (not just the Xsession); Updated u.sh: Added check for root, added notes about sudo and nosuid.
[11-26] mf3-freedreno-android-boot-v4.zip & mf3-freedreno-ubuntu-boot-v4.zip - Finally fixed sudo! See kernel mods sections for details.
[11-26] ubuntu-install-v4.zip - rebuilt with new companions.
Click to expand...
Click to collapse
Aou said:
Check out this app: SManager (Script Manager). It makes running the ubuntu.sh or u.sh a whole lot easier, plus you can send it into the background (vnc method only). Just remember to jump back into SManager later, use the Menu Key and open the console to be able to kill the ubuntu.sh. You can also add "bash" as an additional argument (freedreno method only). This seems to be an effective replacement for the Terminal Emulator. Don't forget to choose the "su" option to run either script as root.
Click to expand...
Click to collapse
I have literally spent hundreds of hours working on this project, and many more hours documenting it thoroughly - just so that I could share it with all of you. If you found this guide, custom kernel or scripts to be beneficial, please hit the THANKS button on this post.
This mostly works, but I think I may have made an error. I see it starting the sshd, but not VNC server. I can call vncserver, but when launching the vnc client app I just get stuck at "Establishing Handshake" until it times out. This differs from when I don't call vncserver, where I get immediately connection refused.
I'm going to redownload the image and start from scratch, but the image isn't very friendly when I'm trying to figure out how to rerun the initial configuration script...
On my S4 running OTA-MF3 with root, this didn't work for me until i used Busybox Installer from the market. Tried internal and external without it, neither worked. Only thing that looked like an error after that was
Code:
chown: cannot access '/external-sd/': no such file or directory
but this only showed the first time I ran it. Opened VNC connection just fine from my computer to the phone, and though there was slight graphics glitching (orange and red boxes on desktop) it worked just fine and they didn't interfere. Thanks for this!
Tsaukpaetra said:
This mostly works, but I think I may have made an error. I see it starting the sshd, but not VNC server. I can call vncserver, but when launching the vnc client app I just get stuck at "Establishing Handshake" until it times out. This differs from when I don't call vncserver, where I get immediately connection refused.
I'm going to redownload the image and start from scratch, but the image isn't very friendly when I'm trying to figure out how to rerun the initial configuration script...
Click to expand...
Click to collapse
It's not, I agree. I found that the easiest way to clear the configuration and start anew is to do the following from the "[email protected]" prompt (that is, within ubuntu):
Code:
rm /root/DONOTDELETE.txt
rm /root/cfg/linux.config
DeadlySin9 said:
On my S4 running OTA-MF3 with root, this didn't work for me until i used Busybox Installer from the market. Tried internal and external without it, neither worked. Only thing that looked like an error after that was
Code:
chown: cannot access '/external-sd/': no such file or directory
but this only showed the first time I ran it. Opened VNC connection just fine from my computer to the phone, and though there was slight graphics glitching (orange and red boxes on desktop) it worked just fine and they didn't interfere. Thanks for this!
Click to expand...
Click to collapse
Interesting. I looked through the image's init.sh, and found something that's relatively new (wasn't in beta):
Code:
# Fix for sdcard read/write permissions by Barry flanagan
chown ubuntu /external-sd/
As far as I can tell, that message is harmless. It's only included in the initial configuration, as it's in the section:
Code:
if [ ! -f /root/DONOTDELETE.txt ]
As for the need to download/install the BusyBox installer, that's not surprising at all. I've had so much trouble BusyBox ever since I switched to MF3. I might include this as an extra step in the OP - thank you.
You kidding right...does this really work? To cool, thanks Aou. Great work.
TheAxman said:
You kidding right...does this really work? To cool, thanks Aou. Great work.
Click to expand...
Click to collapse
Yessir, it does indeed work! The S4 handles it very nicely with the extra RAM & CPU it has to spare, so the only limiting factor is VNC. If someone could devise a way to get Ubuntu to draw directly on the screen from within that Chroot, that would be perfect. I don't think it's really possible by design, but this might be the closest we get to running native linux on the I337 until we see some unlocked bootloaders.
Thanks
Aou said:
Yessir, it does indeed work! The S4 handles it very nicely with the extra RAM & CPU it has to spare, so the only limiting factor is VNC. If someone could devise a way to get Ubuntu to draw directly on the screen from within that Chroot, that would be perfect. I don't think it's really possible by design, but this might be the closest we get to running native linux on the I337 until we see some unlocked bootloaders.
Thanks
Click to expand...
Click to collapse
In fact I am currently working on getting xorg to write to androids frame buffer which will mean no more vnc
Sent from my Nexus 4 using xda premium
zacthespack said:
In fact I am currently working on getting xorg to write to androids frame buffer which will mean no more vnc
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
You, sir, are the man. thank you so much for working on this! I threw $10 at you to help fund the skittles/cheetos/carrots/beer/pizza/whatever it takes to help you along.
Added a couple things to the OP. Looks like pure-stock roms will indeed need BusyBox installed, by some means or another. Also, found SManager, which makes executing the ubuntu.sh script much, much easier.
The second script that allows me to launch ubuntu, but the first that allows me to get a real X server on my vnc. Thank you so much !
PS: Why am I unable to install wine ?
"Package wine is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source"
This is working pretty good, slow though, do I have it setup right, or did I miss something?
TheAxman said:
This is working pretty good, slow though, do I have it setup right, or did I miss something?
Click to expand...
Click to collapse
I have found it to run a bit slow, and with regular crashing of GUI programs too. Is it just slow or unusable? You can always try closing other apps besides terminal and VNC, or try to VNC from a computer even.
tboss1995 said:
The second script that allows me to launch ubuntu, but the first that allows me to get a real X server on my vnc. Thank you so much !
PS: Why am I unable to install wine ?
"Package wine is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source"
Click to expand...
Click to collapse
Looks like you're not the only one. Check out this thread on the LinuxOnAndroid site:
http://forum.linuxonandroid.org/index.php?topic=268.0
TheAxman said:
This is working pretty good, slow though, do I have it setup right, or did I miss something?
Click to expand...
Click to collapse
DeadlySin9 said:
I have found it to run a bit slow, and with regular crashing of GUI programs too. Is it just slow or unusable? You can always try closing other apps besides terminal and VNC, or try to VNC from a computer even.
Click to expand...
Click to collapse
Most of the slowness comes from interacting with it via VNC, it would seem. Hard to compare to anything else, considering VNC is all we've got at the moment. I wonder if @zacthespack can shed some light on this. As he mentioned before, he's working on getting it to draw directly to the Android screen. I'm certainly not going to ask for any status updates, but I'm wondering if he can confirm that we'd see a speed increase without VNC...
EDIT: Also, as I use it more, I am noticing the app crashes too (such as Chromium). Could just be something in the 13.04 image, but also could be because we're running this all on ARM architecture.
Aou said:
Looks like you're not the only one. Check out this thread on the LinuxOnAndroid site:
http://forum.linuxonandroid.org/index.php?topic=268.0
Most of the slowness comes from interacting with it via VNC, it would seem. Hard to compare to anything else, considering VNC is all we've got at the moment. I wonder if @zacthespack can shed some light on this. As he mentioned before, he's working on getting it to draw directly to the Android screen. I'm certainly not going to ask for any status updates, but I'm wondering if he can confirm that we'd see a speed increase without VNC...
Click to expand...
Click to collapse
RE installing WINE, sure you can install the ARM verson but Wine is not a emulator (infact WINE stands for Wine Is Not a Emulator) so you can only run ARM compiled windows software.
Yest there is a good speed increase, as with VNC xorg writes to the vnc server and passes it to the vnc client to then render on the screen.
With the new method xorg just writes to Androids frame buffer, no inbetween man.
And it can get even faster once we have graphics accelerations although not all chip sets will get that.
zacthespack said:
RE installing WINE, sure you can install the ARM verson but Wine is not a emulator (infact WINE stands for Wine Is Not a Emulator) so you can only run ARM compiled windows software.
Click to expand...
Click to collapse
Good point, forgot about that. It's really just a big package of Windows dependencies, responding to API calls, etc. The software that Wine runs is still sending stuff to/from the processor directly, therefore it would have to be compiled for ARM.
I wonder what Windows8 programs are available that are compiled for ARM (because of the Microsoft Surface and all...).
Aou said:
Good point, forgot about that. It's really just a big package of Windows dependencies, responding to API calls, etc. The software that Wine runs is still sending stuff to/from the processor directly, therefore it would have to be compiled for ARM.
I wonder what Windows8 programs are available that are compiled for ARM (because of the Microsoft Surface and all...).
Click to expand...
Click to collapse
There's plenty or ARM software within the built in app store, but I'm not sure where they install to or how one would go about extracting them. I have it on desktop and it shows what processors it runs on. Can't wait for the straight to screen function though
Also, I'm going to see if a different image is more stable. Chromium was the most obvious crashing for me and others generally crashed.
DeadlySin9 said:
There's plenty or ARM software within the built in app store, but I'm not sure where they install to or how one would go about extracting them. I have it on desktop and it shows what processors it runs on. Can't wait for the straight to screen function though
Also, I'm going to see if a different image is more stable. Chromium was the most obvious crashing for me and others generally crashed.
Click to expand...
Click to collapse
I noticed that with 12.04, it doesn't seem to connect to Xorg or something, because when you use VNC, it only shows a grey screen with a cross cursor. Same for both "Lite" and "Full" packages. Haven't tried older (10.x) packages of Ubuntu.
The other Linux images should work just fine. Optionally, you can edit the ubuntu.sh script to be more appropriate, but it should theoretically work the same (unless the init.sh is located elsewhere inside the image...).
I tried the Ubuntu 10 image and the Debian image but ubuntu didn't run vnc (vncserver not found or something) and debian kept saying I didn't have permissions.
It appears chromium is incredibly unstable on this image, so I've uninstalled it.
I'm currently working on trying to get Minecraft to work, but ever since 1.6.2 and this new launcher, it's incredibly difficult to modify the client files and such. Something is going wrong with liblwjgl.so. I can get the launcher to work correctly, but when it goes to load the game, it can't find liblwjgl.so and says that it might be because of 32bit vs ARM. I did get lwjgl installed correctly, and pulled the ARM version of the .so and stuck it in [what I believe was] the right .jar file, but it still has the error.
I'll keep you all posted. If I can get this to work, and if zacthespack can get xorg to draw on the android screen, ... :good:
EDIT:
Found out that every time the launcher runs minecraft, it downloads several libraries and other crap to run the game, to keep itself current and to support multiple versions, yada, yada. Unfortunately, this means that it downloads https://s3.amazonaws.com/Minecraft..../2.9.0/lwjgl-platform-2.9.0-natives-linux.jar every time you click Play, and overwrites any custom one you might have (i.e. one with ARM libraries inside). I tried revoking write access to the file, but then the launcher aborts the launch because it can't overwrite the file.
Any suggestions?
EDIT #2:
Well, the easy solution was to modify the file, run the launcher, disconnect mobile data temporarily, and then launch the game ("couldn't connect to server .... have local copy of file .... assuming it's good...."). No more errors about that stupid library file. However, the game immediately crashes now with an error report. Investigating this now. PROGRESS!
Problem
I'm aware I may need to modify the script in order to accommodate my setup, but I figured I'd post here first before changing anything in case someone else had a similar problem and came up with the solution.
I followed all the instructions, except I want to boot from an external USB stick (mounted using StickMount).
I reviewed the script, dropped it on the root of the USB stick, and copied the unzipped image to a folder named ubuntu.
Here is the output when I run the script:
Making mount points and mounting to them...
mount: mounting /dev/loop20 on /data/local/ubmnt failed: Operation not supported
mount: mounting devpts on /data/local/ubmnt/dev/pts failed: No such file or directory
mount: mounting proc on /data/local/ubmnt/proc failed: No such file or directory
mount: mounting sysfs on /data/local/ubmnt/sys failed: No such file or directory
Connecting to /sdcard...
mount: mounting /sdcard on /data/local/ubmnt/sdcard failed: No such file or directory
Putting in some settings...
net.ipv4.ip_forward = 1
/sdcard/usbStorage/sda1/ubuntu.sh[19]: can't create /data/local/ubmnt/etc/resolv.conf: No such file or directory
/sdcard/usbStorage/sda1/ubuntu.sh[20]: can't create /data/local/ubmnt/etc/resolv.conf: No such file or directory
/sdcard/usbStorage/sda1/ubuntu.sh[21]: can't create /data/local/ubmnt/etc/hosts: No such file or directory
ubuntu is configured with SSH and VNC servers that can be accessed from the IP:
(You will see an error about wlan0 if your WiFi is disabled. Safe to ignore.)
----------------- OKAY, starting Ubuntu! -----------------
chroot: can't execute '/root/init.sh': No such file or directory
----------------- Ubuntu has exited! -----------------
Cleaning up - unmounting everything and removing what we made...
umount: can't forcibly umount /data/local/ubmnt/dev/pts: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/sys: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/proc: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/sdcard: No such file or directory
umount: can't forcibly umount /data/local/ubmnt: Invalid argument
Welcome back to your android.
Click to expand...
Click to collapse
I am running as root, BusyBox free has been installed. My terminal app has been granted root privileges. The path to the USB stick is sdcard/usbStorage/sda1.
Any help/guidance would be greatly appreciated! :fingers-crossed: