I inadvertently downloaded the 4.4.4 upgrade. Not sure if FoxFi still works with that upgrade so I don't want to install it. It keeps prompting me to install. Is there anyway I can delete the file?
Hope this helps.
http://forum.xda-developers.com/verizon-htc-one-m8/help/question-ota-t2930850
See post #5 by @dottat
http://forum.xda-developers.com/verizon-htc-one-m8/help/block-ota-updates-t2871520
And see post #2 by @andybones on how to block it.
---------- Post added at 10:23 AM ---------- Previous post was at 09:56 AM ----------
P7M8 said:
I inadvertently downloaded the 4.4.4 upgrade. Not sure if FoxFi still works with that upgrade so I don't want to install it. It keeps prompting me to install. Is there anyway I can delete the file?
Click to expand...
Click to collapse
Just saw on another thread that you aren't rooted. I'm not sure if you need to be to access these folders, but maybe this would change your mind about it? Maybe at the very least S-OFF.
Related
Tt
reset
The only way to reset is "unroot"
Same as me, you must unroot.
moliverac8 said:
Same as me, you must unroot.
Click to expand...
Click to collapse
how do i unroot it?
shpeckoff said:
how do i unroot it?
Click to expand...
Click to collapse
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
Click to expand...
Click to collapse
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
---------- Post added at 07:21 PM ---------- Previous post was at 06:50 PM ----------
acefsw said:
Try this thread, has stock recovery http://forum.xda-developers.com/showthread.php?t=1744645
---------- Post added at 06:50 PM ---------- Previous post was at 06:43 PM ----------
Or go here http://www.sammobile.com/firmware/?page=3 and use the drop downs menus to select your device, etc, submit, and it will list the firmware for your device. You may have to downgrade and ota again, not sure.
Click to expand...
Click to collapse
Get odin 1.85 here http://rootzwiki.com/topic/32155-guide-tab-2-101-and-70-rootingcwmroms/page__hl__+unroot++gt++p3110 use the sammobile file you dowloaded, not theirs, (wrong file) follow instructions section E
Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!
shpeckoff said:
Thank you for these suggestions.
However, they all consist in flashing a stock ROM and bootloader onto the device, overwriting the current setup.
Do I really need to to this, given that the current bootloader is stock (never flashed it, not needed with the method I used) and the ROM is 100% stock also (came from OTA). I am really curious about this thing and would like to understand what went wrong, instead of just overwriting everything and starting over.
Anyways, the suggested method should be fine in case i need to return the tablet for warranty purposes. That was my primary concern. Thanks!
Click to expand...
Click to collapse
When you you root you replace stock files and add some new files that are detected by the installation process of the OTA updates. This sets a flag to block further updates from Samsung. You can still update by restoring to stock then getting the updates then rooting again, but OTAs will not be automatically delivered to your device while its rooted.
sorry for my English fierst lol )))
hello. i have unlocked lg d800 undroid 4.4.2 not rooted and whont update knock code and when i trie to update it cpmes messige "youer phone not registered yet" whot can i do? please help. thanks ))
most probably you'll have to root your phone.
Kernel with the knock code update is available here (last one) https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800
So according to my knowledge you can get the knock code update simply by flashing the D800-20u kernel on top of the KITKAT(original) rom.
i can't get it without root?? i never root this phone
Well it seems that you need to root to flash which is really easy. Rooting is not rocket science
http://forum.xda-developers.com/showthread.php?t=2448887
http://www.droidviews.com/root-and-...lg-g2-verizon-att-sprintt-mobile-bell-rogers/
Kasvinda said:
Well it seems that you need to root to flash which is really easy. Rooting is not rocket science
http://forum.xda-developers.com/showthread.php?t=2448887
http://www.droidviews.com/root-and-...lg-g2-verizon-att-sprintt-mobile-bell-rogers/
Click to expand...
Click to collapse
thanks but if i dont wont to root phone i can't installation knock code ? (((((
and root erase all data on the phone?
zara909 said:
and root erase all data on the phone?
Click to expand...
Click to collapse
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)
Kasvinda said:
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)
Click to expand...
Click to collapse
i'll check it thank you very much
Kasvinda said:
No data will be lost. So that suggests you it is a simple process and you always can unroot the device.
****For your information Even if you do a factory reset only the settings will be gone. Non of you photos or files will be lost.
---------- Post added at 04:08 PM ---------- Previous post was at 03:48 PM ----------
Well i think i found to flash the update without rooting. Download the kernel (last one in https://www.lg.com/global/support/opensource/opensourceList?types=NAME&search=d800 and extract it. If it contains a kdz file then tell me. Im at work btw)
Click to expand...
Click to collapse
there is 2 file
well i trie to root my phone but it say downgrade version
This is a temp root and will be removed every hard boot.
I am not responsible if you break your device!
You have been warned.​
Knox is not tripped​
Hello All, I Have found a temp root process for those who have the AT&T Tab 4 with the kernel build Thu Aug 13 17:01:34 KST 2015.
Download Tab 4(Temp root), you will have 3 files. Odin 3.07, boot(LP_fix).tar and Kingroot-4.1.apk.
Install KingRoot on your tablet run and click Start Root. After the first time the process of checked for root will take longer as su will still be installed.
You will now have KingUser installed in /system/app/
When uninstalling bloatware, do it in one go.
When you have to reboot, reboot into download mode or you will get the AT&T unauthorized screen.
Use Odin to Flash PDA with the boot(LP_fix).tar, this will wipe the su links so the kernel doesn't see it and will boot. You will reboot automatically back to the launcher and will be able to reboot without using Odin.
Need help furthering permanent root as this is beyond my skills.
Update 1/27/16 14:35
Deleting all knox related apps is safe so far, setting build.prop ro.build.selinux=0 and a soft reboot seems to put kernel in permissive mode. Download a soft reboot app from the play store for reboots.
Don't let you tablet die and you don't have to keep doing this process!
Thanks to CocaFoca for the boot(LP_fix).tar.
Thanks for the dev(s) of KingRoot.
Does it work
Anyone try this yet?
---------- Post added at 12:45 AM ---------- Previous post was at 12:27 AM ----------
Seems kind of weird no one is commenting on this, wonder if it works
I see this on a few different sites but no comments on any of them. I use my tab for work and can't afford to be Guinea pig and turn tab into hockey puck so have to wait a while I guess. If anyone can confirm that this works let us know please
Seeing as how the author wont even reply its not worth the risk to me
This works just no hard boots. No knox trips either. Still working on recovery methods maybe someone can help upload there build.prop.
TechNyne66 said:
This works just no hard boots. No knox trips either. Still working on recovery methods maybe someone can help upload there build.prop.
Click to expand...
Click to collapse
what soft boot app did you use?
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
I didn't realize there was no odin firmware yet. kind of scary, anything goes wrong and I'm screwed
gonzo6962001 said:
what soft boot app did you use?
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
I didn't realize there was no odin firmware yet. kind of scary, anything goes wrong and I'm screwed
Click to expand...
Click to collapse
Just search soft reboot in play store and it has red arrows in a circle motion. As long as you don't mess with build prop you will be fine.
on your notes on the 27th you put to do.... setting build.prop ro.build.selinux=0...... do I still do that? The last message you sent said as long as I dont mess with build prop I will be fine...
gonzo6962001 said:
on your notes on the 27th you put to do.... setting build.prop ro.build.selinux=0...... do I still do that? The last message you sent said as long as I don't mess with build prop I will be fine...
Click to expand...
Click to collapse
If you know what your doing you can change build.prop, do you need permissive kernel? All it does is disables SElinux for stuff like xsposed which isn't supported yet. Its aimed more to someone who will help farther to permanent root. The build prop is really good for this device.
I cant get that odin to open will 3.09 work? I already have that one installed
---------- Post added at 07:13 PM ---------- Previous post was at 06:44 PM ----------
IT WORKED!!!!!! Thank you............................................................................ Soft reboot after doing build prop adjustment and it worked. Bout had a stroke when it said starting apps but couple seconds later started up with ROOT.......................
---------- Post added at 07:34 PM ---------- Previous post was at 07:13 PM ----------
dumb question, I want viper4android and most say to flash in custom recovery. Can I still go into stock recovery without screwing things up? Then if I can I would have to go into download and flash through odin and then reroot right?
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
TechNyne66 said:
If you know what your doing you can change build.prop, do you need permissive kernel? All it does is disables SElinux for stuff like xsposed which isn't supported yet. Its aimed more to someone who will help farther to permanent root. The build prop is really good for this device.
Click to expand...
Click to collapse
dumb question, I want viper4android and most say to flash in custom recovery. Can I still go into stock recovery without screwing things up? Then if I can I would have to go into download and flash through odin and then reroot right?
well it does work but twice it rebooted on its own and luckily I got it into download before the bootloader got it. I think Im gonna quit playing with fire before I get burnt
gonzo6962001 said:
I cant get that odin to open will 3.09 work? I already have that one installed
---------- Post added at 07:13 PM ---------- Previous post was at 06:44 PM ----------
IT WORKED!!!!!! Thank you............................................................................ Soft reboot after doing build prop adjustment and it worked. Bout had a stroke when it said starting apps but couple seconds later started up with ROOT.......................
---------- Post added at 07:34 PM ---------- Previous post was at 07:13 PM ----------
dumb question, I want viper4android and most say to flash in custom recovery. Can I still go into stock recovery without screwing things up? Then if I can I would have to go into download and flash through odin and then reroot right?
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
dumb question, I want viper4android and most say to flash in custom recovery. Can I still go into stock recovery without screwing things up? Then if I can I would have to go into download and flash through odin and then reroot right?
Click to expand...
Click to collapse
No custom recovery yet as I was told bootloader is locked, until someone confirms custom recovery works in am staying away as there's no Odin firmware and I need warranty. Yes Odin 3.09 will work but it will remove root really no need unless a hard reboot is needed your your tablet dies. Just keep with soft reboots. As for viper I would stay away soundalive is way better. Stock recovery will not work.
Better than viper4android? I highly doubt that. Don't think that is possible
First, just want to say thanks for sharing this info & zip. It brought my tab back from the dead after i rooted. (initially i was unaware it had a locked bootloader until after i rooted). I just have a cpl questions maybe someone in here can answer.
1. Has anyone tried using Flashify or Root Rashr to flash the boot_LP_fix.tar before powering off? I personally have never used either app so i dont know if either can flash .tar files. I know Mobile Odin would probably work, buy it doesn't support LP. 2. Has anyone installed busbox? 3. Do any of the "Hide Root" type apps function in such a way as to let the tab reboot? Those were just a few questions i had about this. Thanks for any info.
lbcary said:
First, just want to say thanks for sharing this info & zip. It brought my tab back from the dead after i rooted. (initially i was unaware it had a locked bootloader until after i rooted). I just have a cpl questions maybe someone in here can answer.
1. Has anyone tried using Flashify or Root Rashr to flash the boot_LP_fix.tar before powering off? I personally have never used either app so i dont know if either can flash .tar files. I know Mobile Odin would probably work, buy it doesn't support LP. 2. Has anyone installed busbox? 3. Do any of the "Hide Root" type apps function in such a way as to let the tab reboot? Those were just a few questions i had about this. Thanks for any info.
Click to expand...
Click to collapse
Hide root does not work has to do with the kernel checking for root or sumlinks, busy box installs and works but no idea on flashify.
Thanks. Appreciate the info. Im only looking for a way to safely power down bcuz about 2 or 3 times a week my tab doesnt get plugged I into a charged so it gets shut off. My girlfriends mother & son play with it & use it to stream movies. It would be great if there was a functional equivalent of Mobile Odin Pro so when i was done busing it i vould simply flash the tar. file so it would boot. Maybe ill do a little experimenting & see what happens. Thanks again
Can someone with a rooted SM-T337A do a system dump with these files included modem.bin, NON-HLOS.bin, recovery.img, a cache dump, and the PIT file??? Please
Thanks worked
I think I dun goofed :c. Was working fine, then I had to reboot, flashed the .tar, but I think I was a second late on catching it, because now it doesn't boot :c Hangs on ATT screen. HEEELP :C
Does anyone have a tar file for the t337a?
I hope someone can lead me in the right direction. Somehow i have lost the sprint spark boot animation.
And ive been trying to get it back but to no avail it didn't work for me i have all the tar files and ive been through them all . All help will be greatly appreciated.
jslim38 said:
I hope someone can lead me in the right direction. Somehow i have lost the sprint spark boot animation.
And ive been trying to get it back but to no avail it didn't work for me i have all the tar files and ive been through them all . All help will be greatly appreciated.
Click to expand...
Click to collapse
Change your csc to spr. There are apps that help if u r rooted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:59 PM ----------
Or reselect it if your already spr
---------- Post added at 05:18 PM ---------- Previous post was at 05:00 PM ----------
Sorry to be more precise you need to change your preconfig to spr or redo it. It may reset device but i am pretty sure root wont be lost or anything just basically reset without losing everything.
droseofc said:
Change your csc to spr. There are apps that help if u r rooted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:59 PM ----------
Or reselect it if your already spr
---------- Post added at 05:18 PM ---------- Previous post was at 05:00 PM ----------
Sorry to be more precise you need to change your preconfig to spr or redo it. It may reset device but i am pretty sure root wont be lost or anything just basically reset without losing everything.
Click to expand...
Click to collapse
Im not rooted im trying to go back to stock but when i Odin back to stock some how i lost the sprint boot animation
jslim38 said:
Im not rooted im trying to go back to stock but when i Odin back to stock some how i lost the sprint boot animation
Click to expand...
Click to collapse
Which stock are you going to. http://forum.xda-developers.com/spr...torial-enable-true-spark-lte-missing-t3191444 this should work
droseofc said:
Which stock are you going to. http://forum.xda-developers.com/spr...torial-enable-true-spark-lte-missing-t3191444 this should work
Click to expand...
Click to collapse
I tried that one also i have six tar files and ive tried them all
jslim38 said:
I tried that one also i have six tar files and ive tried them all
Click to expand...
Click to collapse
The sure bet way that i know from doing would be root easiest would be autoroot unless kingoroot apk works for note 5 now, and then download the csc select apk https://csc-select.en.uptodown.com/android the app says it may work unrooted so maybe try that first otherwise for sure rooted works and so check the try root method box and itll take you to a screen showing cscs like spr bst xas.. choose spr, phone should reboot and have the animation. Just unroot if u want afterwards if u had to. Unless u havent ever been rooted and dont want to be....but then idk how you wouldve lost the stock animation.
---------- Post added at 06:52 PM ---------- Previous post was at 06:50 PM ----------
When u try the odin do you check rtn, clear efs and whatever else that other xda forum says? Maybe pain to try again vs this method which is not as long, download apk, autoroot if needed, change csc.
Solved for some reason odin wasnt flashing correctly.
jslim38 said:
Solved for some reason odin wasnt flashing correctly.
Click to expand...
Click to collapse
Good deal, sorry wasnt able to give any better options. At least all is well in the end
All,
I just checked updates and am in the process of downloading a file that is 1548.94 MB. My guess is it's the Oreo update. How can I get the update.zip for you guys to download?
Current Baseband version G950USQS2BRB1.
It's downloaded but I have not allowed the restart to proceed yet so I can possibly pull the update for you guys. I am not rooted.
What version are you on?
gurinder073 said:
What version are you on?
Click to expand...
Click to collapse
Baseband version G950USQS2BRB1
I just got it too.
Edit: New version is 2CRB9
Link to OTA FIle
Anyway you can post a link to the OTA file.
dmjx22 said:
Anyway you can post a link to the OTA file.
Click to expand...
Click to collapse
h++ps: //dc5.androidfilehost > com/dl/6nysws2l_Vx3teux_M8MsQ/1522688520/818070582850501094/S8+G950USQS2BRB1-to-U2CRB9+Oreo+8.0.zip?
Sorry stoopid rules for links and crap... Just replace ">" with "." and the http part should be obvious...
But I just use odin and do a fresh install because you can just use SmartSwitch to back before the update and restore apps and what nots after you know the update worked Better safe then sorry anyways. A failed OTA update on an S4 landed me a Brand new replacement phone once! Or you can try to flash Home_CSC instead of CSC to keep your files... I don't like that option myself...
Full ODIN
h++ps: //dc5.androidfilehost > com/dl/F58Llw5Gl0YcIQtrLT4N4A/1522690412/673956719939828920/G950USQU2CRB9_ODIN_Files.zip?
Should work with All US carriers. Make sure you use the right USERDATA for YOUR carrier!!
---------- Post added at 07:03 PM ---------- Previous post was at 06:52 PM ----------
sib101 said:
All,
I just checked updates and am in the process of downloading a file that is 1548.94 MB. My guess is it's the Oreo update. How can I get the update.zip for you guys to download?
Current Baseband version G950USQS2BRB1.
It's downloaded but I have not allowed the restart to proceed yet so I can possibly pull the update for you guys. I am not rooted.
Click to expand...
Click to collapse
You must be rooted and have access to the cache partition.
But thanks for thinking of US!!! :good: