xperia M2 dead - Sony Xperia M2

hi all.
i have one problem with experia m2 from my friend.
i push the power button to open the phone and doesn't open but the red light blinking.
i try to boot on flash mode and nothing. The phone is dead. i connect to charger and the red light is blinking again.
what i must can do?
Is there some way to fix it?
thanks in advance
and sorry for my english.

cocous said:
hi all.
i have one problem with experia m2 from my friend.
i push the power button to open the phone and doesn't open but the red light blinking.
i try to boot on flash mode and nothing. The phone is dead. i connect to charger and the red light is blinking again.
what i must can do?
Is there some way to fix it?
thanks in advance
and sorry for my english.
Click to expand...
Click to collapse
Leave it plugged in and try to turn it minutes later, sometimes flashes is that it has no battery, sorry for my english
One hello
Dejalo enchufado y trata de encenderlo minutos despues, a veces que parpadee es que no tiene nada de bateria
Un saludo

When the led light blink on a sony xperia device , it means that the battery is too low. I have already had this, you have just to charge it all the night .

Kzeran said:
When the led light blink on a sony xperia device , it means that the battery is too low. I have already had this, you have just to charge it all the night .
Click to expand...
Click to collapse
I do this but nothing.
Στάλθηκε από το LG-D955 μου χρησιμοποιώντας Tapatalk

Had you press the " reset " button ? It is in the SD/sim slot .

Conect the device to the charger, wait some minutes then remove the sim and sd and press the reset button that is located in sd/sim slot (device still conected to the charger) for 3 seconds.

Dontneedanick said:
Conect the device to the charger, wait some minutes then remove the sim and sd and press the reset button that is located in sd/sim slot (device still conected to the charger) for 3 seconds.
Click to expand...
Click to collapse
Nothing again my friend. I connect to charge and only blinking.
If i press the volume up and power the phone only vibrate. Nothing else.
Στάλθηκε από το LG-D955 μου χρησιμοποιώντας Tapatalk

cocous said:
Nothing again my friend. I connect to charge and only blinking.
If i press the volume up and power the phone only vibrate. Nothing else.
Στάλθηκε από το LG-D955 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
But you tried the reset button? I mean, I had the same problem and I tried a lot of things; in the end only the reset button worked.
pd: Your pc recognize the device?

Dontneedanick said:
But you tried the reset button? I mean, I had the same problem and I tried a lot of things; in the end only the reset button worked.
pd: Your pc recognize the device?
Click to expand...
Click to collapse
I'll try but nothing.
I don't know. Maybe some problem with bootloader. No open, no flashmode, no fastboot, no charge, nothing. Only red light blinking and some vibration if press volume up and power.
Στάλθηκε από το LG-D955 μου χρησιμοποιώντας Tapatalk

cocous said:
hi all.
i have one problem with experia m2 from my friend.
i push the power button to open the phone and doesn't open but the red light blinking.
i try to boot on flash mode and nothing. The phone is dead. i connect to charger and the red light is blinking again.
what i must can do?
Is there some way to fix it?
thanks in advance
and sorry for my english.
Click to expand...
Click to collapse
NOTE: READ IT BEFORE YOU DO IT!
Only way to fix is using flash tools. You mentioned it didn't work but try following my instructions and see if it works
1) if you have flashtools uninstall it completely just for safe measure
2)reinstall the latest version
3)install the driver in side this folder(C:\Flashtool\drivers) NOTE: depends on your drive OS and install locations
4)open it up and let it do it's thing
5)once its pulled all it's goodness form github click "Devices" next to help
6)check updates and select phone (m2 hopefully)
7)this bit is a bit tricky as it depends on which phone you have (i know xperia m2 but which model?!?!?!?)
8)i have the D2305 which is single simmed black one (dunno if colours matter but for the sake of it it does)
9)look through the list choose one of the items (the names are based on country codes so pick US if you can't find yours; the global version has an annoying bit in the statute bar about your carrier and it's MASSIVE)
10) let it download and extract it took me a good 20min with my PC and internet may vary depending on your PC and ISP
11)click the lighting bolt and select flash mode
12) wait a few mo' s and when it pops up saying plug your device in...
13)REINSTALL THE DRIVERS i had to maybe it's just me
14)open the sim/sd slot and find a nice lil' hole
15) stick a pin or paper clip in it (it'll shut down the phone, just incase you were trapped in bootloop and couldn't tell if was on or off)
16)HOLD DOWN THE VOLUME DOWN
17) plug in your micro usb to your phone
18) insert the usb (large one to pc) into the pc
19) it should make a "bum bum" windows connection sound
20) tons of random code and stuff will start to spew out of the flashtool, wait for it to finish
21) after the green bar fills up and it tells you to reboot, you reboot
22)hold on to power button and let it do it's thing NOTE: NOTHING ELSE!!! JUST POWER
You should now hear the sony boot up and be able to set it up like it was new.
If it does work just leave a comment soother know.
IF it doesn't then copy and pastebin the flash tools results and maybe i can hep you
Sorry if it was a bit (REALLY) long and spammy
Thanks

Thank you my friend for your time. Il try it tommorow because now im in work and i say to you if this work.
Στάλθηκε από το LG-D955 μου χρησιμοποιώντας Tapatalk

Ok my friend the phone is open after flash the firmware but i have one message on my screen when opening and say Mismatch - model [eagle ds] software [eagle lte]. It stays there for 5 minutes and after boot normal to rom. When booting i have system ui error and nothing i can't do.
Any help?

You flashed wrong ftf, download right one and after flashing should be good.
Sent from my D2303

cocous said:
Ok my friend the phone is open after flash the firmware but i have one message on my screen when opening and say Mismatch - model [eagle ds] software [eagle lte]. It stays there for 5 minutes and after boot normal to rom. When booting i have system ui error and nothing i can't do.
Any help?
Click to expand...
Click to collapse
Yes yes i found them. Thank you. The phone now is working again. Thank you.

cocous said:
Yes yes i found them. Thank you. The phone now is working again. Thank you.
Click to expand...
Click to collapse
Not sure if to me or Dzefar but, Glad to help!

BlazingBullets said:
Not sure if to me or Dzefar but, Glad to help!
Click to expand...
Click to collapse
Thank you my friend

Hey! I have the same problem, but I can't enter the fastboot mode nor flashtool mode. When I connect my phone to PC (holidng down the volume - key), the red light glares/blinks. I have no idea what to do, any help, please?

b_psycho said:
Hey! I have the same problem, but I can't enter the fastboot mode nor flashtool mode. When I connect my phone to PC (holidng down the volume - key), the red light glares/blinks. I have no idea what to do, any help, please?
Click to expand...
Click to collapse
Open Flashtool, select the ftf you want to flash, when it says : connect your phone, press volume down + connect usb. Flashing should start, wait till done, when it's finished you'll get message: disconnect your phone. Disconnect phone and turn it on, first boot should take little longer so be patient.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4

Thank you, but I've tried that, the computer didn't detect my Xperia was connected ... That's the problem :x

b_psycho said:
Thank you, but I've tried that, the computer didn't detect my Xperia was connected ... That's the problem :x
Click to expand...
Click to collapse
You need to install PC Companion (it installs needed drives) and Flashtool/drivers - Fastboot & Flashmood (if you are on Windows 8.1 you'll have to disable driver signature verification) reboot after installing you should be good to go.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4

Related

[Q] xperia miro possible hard brick?

so... i flashed 11.0.a.5.5 but i forgot to root it, so i downloaded some older firmware. unluckily, something was wrong with that file and i got dump ram message. so... i downloaded other version of firmware and flashed. then, when i tried to turn it on, only green light would few time blink and that was all. so i tried to flash again with that same firmware. and now - when i try to turn it on, nothing happens. tried to turn it in flash mode - nothing. fastboot mode - nothing. something that gives me hope - when i plug it in computer, it detects that something is plugged in, but beside that - nothing happens
maybe battery is dead? it charges when you plug in charger?
Στάλθηκε από το Xperia Tipo μου χρησιμοποιώντας Tapatalk 2
i connected it through the night. no led turned on, or anything.
dead?
Maybe you should charge the battery in some other phone or universal charger and then try to get into flashmode.
Sent from my ST23i
remove your battery
open flash tool
start flashing
connect the phone without battery in flash mode (do not remove your finger from flash mode button) when flashtool prompts you
and then load your battery and remove finger from flash mode button
it will solve the problem
Naney said:
remove your battery
open flash tool
start flashing
connect the phone without battery in flash mode (do not remove your finger from flash mode button) when flashtool prompts you
and then load your battery and remove finger from flash mode button
it will solve the problem
Click to expand...
Click to collapse
it didn't. i'll give it another try with another battery.
thanks guys for helping me :highfive:
DUIRduje said:
it didn't. i'll give it another try with another battery.
thanks guys for helping me :highfive:
Click to expand...
Click to collapse
did you try it
did it work
Flash it online, maybe it will work bro
FajarMF28 said:
Flash it online, maybe it will work bro
Click to expand...
Click to collapse
i don't get it
@Naney
no, it didn't work
DUIRduje said:
i don't get it
@Naney
no, it didn't work
Click to expand...
Click to collapse
it must work bro
i think u did a little mistake
describing again
remove your miro's battery and do not install it
open flashtool and start flashing
when flashtool prompts you, connect the mobile phone without battery in flash mode (pressed volume down button or whatever it is)
i made it lots of time with tipo and every time worked..
good luck..
Have you unlocked your bootloader? If not repair it in PC Companion.
same problem
DUIRduje said:
so... i flashed 11.0.a.5.5 but i forgot to root it, so i downloaded some older firmware. unluckily, something was wrong with that file and i got dump ram message. so... i downloaded other version of firmware and flashed. then, when i tried to turn it on, only green light would few time blink and that was all. so i tried to flash again with that same firmware. and now - when i try to turn it on, nothing happens. tried to turn it in flash mode - nothing. fastboot mode - nothing. something that gives me hope - when i plug it in computer, it detects that something is plugged in, but beside that - nothing happens
Click to expand...
Click to collapse
dude i have the same problem with the same device , would u please tell me how u fixed it ?? thanks
francois90 said:
dude i have the same problem with the same device , would u please tell me how u fixed it ?? thanks
Click to expand...
Click to collapse
i brought it to service. they thought that motherboard failed and replaced it. by some luck they didn't get what actually happened. and everything was covered by guarranty
:victory:
Naney said:
remove your battery
open flash tool
start flashing
connect the phone without battery in flash mode (do not remove your finger from flash mode button) when flashtool prompts you
and then load your battery and remove finger from flash mode button
it will solve the problem
Click to expand...
Click to collapse
not work, my phone hard brick, help any solutions
Ermm..

Tutorial: Fix Xperia C softbrick with red led and no Sony logo

Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
Xperia C with red light softbrick
MicroUSB Cable
Sony Update Service
Click to expand...
Click to collapse
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
I flashed a faulty recovery using mobileuncles and there was no signs of life other than a red led liggt, and holding power + volume up works just fine and it went into flashmode.
I have the same issue.
I organized xperia light rom for our xperia c, I flashed it from custom recovery. Phone is completely dead now.
There is a just red light, phone does not go into download or fastboot mode. Pc Companion, Sony Update Center, Wmshua Flashtool do not recognize the phone.
Any suggestion with that?
I don't have warranty, my last option is to pay money for technical service.
this worked for me but instead of POWER+VOL UP i used POWER+VOL DOWN
thanks
thank, i like this forum
worth to try... (hope it won't happen to me :laugh: )
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
seiferfury said:
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
Click to expand...
Click to collapse
How did it
How Catch 4 buttons simultaneously
Please reply to the importance of
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
zergmac023 said:
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
Click to expand...
Click to collapse
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
(
TacoNikky said:
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
Click to expand...
Click to collapse
Which probably crying::crying::crying:
yeubeo168 said:
Which probably crying::crying::crying:
Click to expand...
Click to collapse
I have bought motherboard from china http://www.yoybuy.com/en/show/37431065583/ from this seller.
It took 20 days to arrive to Turkey. I have changed my motherboard and my phone is back right now :victory:
It works like a charm. Model number changed, it shows s39h but phone works like old days :good:
A detailed guide :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
It worked!!!!!
GethPrime said:
Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Click to expand...
Click to collapse
It worked for my Xperia M (rooted on JB 4.3) with a locked bootloader which was STUCK on bootloop screen and when I did the whole thing with holding the power and volume up button (after I let the battery die after so many bootloops it did), FINALLY I was able to take it to flashmode, while I had selected from Sony PC Companion to repair my phone, and after 3-4 tries, I DID IT!!! Thank you so much for this thread ( I DEFINITELY pressed the "thanks" button), it really SAVED ME time and money (because I was planning to send it to Sony to fix it and you ALL know how bastards Sony is)!!!! And to all those of you who are DESPERATE to fix their phone (I hope you read this thread), DON'T PANIC, and DON'T GIVE UP!!! It took me 2 days of searching the web, and FINALLY I MADE IT!!! There are ALWAYS solutions to these kinds of problems!!!!
red light
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Need help
same here only red light is blinking,,,i tried doing Power+vol up and Power+vol down and by inserting cable also...it just show a red light when plugged in
i'm also having the same problem....somebody please help!!!!really need to use it
kamran.kerim said:
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Click to expand...
Click to collapse
i'm also having the same problem....somebody please help!!!!really need to use it
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
Does that mean phone is dead?
choxx said:
Does that mean phone is dead?
Click to expand...
Click to collapse
no all you need stock kernel
you can either google it or download ftf and check all except kernel
done

Miro bricked after flashing wrong bootloader

Hi,
I don't know what can I do now, perhaps noting. I accidentialy flashed wrong bootloader (from other xperia, not Miro). Now phone seems to be completly bricked, I can't turn it on and my PC does not see any new device after connecting phone to usb. I also tried to remove and insert battery, after this when trying to power on, there is short vibration and nothing more.
Do you have any ideas? Or I simply should to use it as brick, not as phone or put it to my toilet and wash? Thanks.
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool for Xperia devices
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck :good:
Dzepar said:
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Click to expand...
Click to collapse
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
giaur said:
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
Click to expand...
Click to collapse
You should see green light. Try this :
Pull out battery, hold power button for 10 seconds without battery. Reinstall battery, hold volume button - and connect to usb. Then follow steps that prateek.invasion gave you.
The point is you can flash ftf and restore your phone.
Good luck.
Sent from Xperia M2 D2303
Thanks, I will try. Batteery is not charging, so I need to do this quick, it was not fully charged.
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
giaur said:
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
Click to expand...
Click to collapse
I had the same issue with my xperia e after I unlocked the bootloader and installed CWM, the phone just rebooted itself at boot up. If you have installed CWM I suggest you to install a custom rom and a new kernel. That worked for me . Or ofc, if you have warranty you can send it to them. They won't be able to tell if you installed another rom since the pc doesn't recognize the phone.
I don't have cwm... trying to connect to computer with volume down pressed. After this led starts flashing red and computer can't see any device connected
Seems there is no any recovery or I can't put it to recovery mode.

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

Flashtool problems ! PLEASE HELP ME !

Hi, I'm having a problem with Flashtool... It never happened before. Everything is installed correct, drivers too. I download the Russian Firmware and when i Try to flash it... I connect the phone press the down botton and plug the device, and that's where the problem start, my phone won't switch on, flashtool turn my phone off and I can't switch back on... I already tried to re-install the flashtool, delet files, re-install drivers... but nothing. I already tried in a different computer, same problem.
Please help !
Mobile : Xperia Z3 Dual (D6633)
Try to flash a different ROM, you're safest with Central europe ROM. If your phone is detected by flashtool, then it's probably not a big problem. And download the ROM from XperiaFirn.
Sent using XDA One
DeHuMaNiZeD said:
Try to flash a different ROM, you're safest with Central europe ROM. If your phone is detected by flashtool, then it's probably not a big problem. And download the ROM from XperiaFirn.
Sent using XDA One
Click to expand...
Click to collapse
Yes... Flashtool detect my phone when it's turned on... When need to switch off and plug holding the down button, I don't know what happens, brick my phone and it don't turn on anymore .... after hours the phone asks for battery and i can switch on by chargin, and it's not a baterry problem.
I don't quite understand what you're doing but just to be sure when the ftf is loaded before plugging the phone hold power+vol up until it vibrates 3 times. Then hold vol down and plug the phone and you should see the led blinking green (one time).
omegastarr said:
I don't quite understand what you're doing but just to be sure when the ftf is loaded before plugging the phone hold power+vol up until it vibrates 3 times. Then hold vol down and plug the phone and you should see the led blinking green (one time).
Click to expand...
Click to collapse
I don't know how to explain that. When flashtool shows the pop up message asking for hold how the vol button and plug the device, the pop up does not fades away and my phones got bricked and does not switch on.

Categories

Resources