[Q] One Plus Phone Stuck in Boot Loop ! Please Help ! - ONE Q&A, Help & Troubleshooting

My phone is stuck on boot loop ever since I did
OTA update to 33R. Phone boots and stays on the
1+ screen.
My One Plus is not rooted. The bootloader
is not unlocked. I have not turned on USB
Debugger.
So far I have done factory reset / wipe cache.
I have wiped partition and media without any luck.
I downloaded Android SDK and tried to use fastboot erase cache
but keep getting "waiting for device".
My phone appears as a "Android Device" with
a yellow question mark in Device Manager. Tried
to provide the Gooogle USB Driver from Android
SDK but it did not take.
So completely lost at this point. Please help.
p.s. I am absolutely new to Android.

can you connect it in fastboot mode?

risay07 said:
can you connect it in fastboot mode?
Click to expand...
Click to collapse
I can get to Fastboot mode by pressing power + volume up. But from PC command prompt when i enter any fastboot commands - I get
"waiting for device".

aminushki said:
I can get to Fastboot mode by pressing power + volume up. But from PC command prompt when i enter any fastboot commands - I get
"waiting for device".
Click to expand...
Click to collapse
that usually means that drivers are not installed correctly. please use (google) Universal ADB and Fastboot Driver to get access via fastboot. if it still Shows waiting for device try another pc. if that wont help too, you have to file a RMA at oneplus.net.
Gesendet von meinem 1+ One

Aavion said:
that usually means that drivers are not installed correctly. please use (google) Universal ADB and Fastboot Driver to get access via fastboot. if it still Shows waiting for device try another pc. if that wont help too, you have to file a RMA at oneplus.net.
Gesendet von meinem 1+ One
Click to expand...
Click to collapse
Danke sher. I will try the drivers again. In case I can detect the phone - what steps should I take next?

Related

[Q] TWRP problem

I want to root my tablet so I flashed TWRP 2.6.0.0 using fastboot everything works fine.
But now I want to install the zip to root the tablet, problem is TWRP cannot mount any storage, internal sdcard external sdcard nothing at all is alway says E:Can't mount 'xxx' on anything I tap.
I tried CWM, and 2.5.0.0 and nothing seems to work.
I can boot fine in the stock OS, everything works fine but that
My bootloader is 10.6.1.27.1-20130711
Can anyone help me?
Ok now it is bad, I tried to factory reset using the bootloader (power + volume down)
It booted in the buged TWRP and now it keeps booting in TWRP and I cannot even reach the bootloader
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
aarsyl said:
Try using adb commands to boot into bootloader.
ADB reboot-bootloader is the command that I think you must use. Of course, use adb devices to see if your tab is listed.
______________________________
HTC Evo 4G LTE
Click to expand...
Click to collapse
I cannot get this to work on Windows 8, I have Asus Transformer ADB interface lister in device manager but I cannot see my device with the adb devices command.
Also, in TWRP when I try adb sideload it says failed.
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Buster99 said:
win 8 is the worst OS you want to use when it comes to fastboot/adb (even with secpol.msc full admin access)
get your hands on a win7 / vista /xp
oh and TWRP2.6 is kinda bugged - flash 2.5 or lower
check this http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12 but skip the steps you dont need (system, data userdata etc.)
cheers & gl
-Buster
Click to expand...
Click to collapse
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Matiosse said:
I'm now on my laptop with Win7,
Ok so I tried to reset my device with a needle, but I cannot get it to the bootloader.
Still stuck in TWRP, I tried to go with ADB, I installer google usb driver from Android SDK, I cannot get it to be recognized by ADB, in the device manager I only see Transformer with a yellow "!", I tried with the Asus usb driver, nothing either.
Is there something else I can do to get this recognized with ADB? (fastboot doesn't work either)
I tried unpluging all, uninstalling all and reinstalling like 3 times.
Thanks for your help
Click to expand...
Click to collapse
fastboot should work. hold Vol-down and reset the device and keep vol-down pressed. it should go to fastboot. when you're in fastboot connect it to your laptop and see if the OS recognized your device - if not you have a driver issue. resolve that by installing the asus driver or the newest google generic drivers.
when you can see your device on dosprompt/powershel with fastboot devices then continue with getting recovery to work.
btw- stuck in twrp means? booting twrp (teamwin screen) but not responding?
good luck
-Buster
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Matiosse said:
The problem is I cannot even get into fastboot, it keeps booting into TWRP, I tried to reset the tab with a needle, but I cannot reach fastboot in any ways
Click to expand...
Click to collapse
but you are still able to boot into android?
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Matiosse said:
I was until I tried a factory reset, it wasn't working in Android so I did it in the fastboot menu.
Click to expand...
Click to collapse
can you boot into twrp? and i mean just boot into it? so that you see install, backup, restore etc. buttons?
if yes - twrp has an adb mode
connect your tab in twrp to your pc (check that you can see it - adb devices) if yes type: adb reboot bootloader
and you should boot into that. test it with fastboot devices.
most important thing is that you get into fastboot or a working recovery to flash or prepare to flash a (custom) rom back onto your device.
Buster
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Matiosse said:
I can get in TWRP on 2.5.0.0
But when I try ADB sideload it fails
The message is ADB sideload complete - Failed in red + lots of errors like Unable to mount '/data' '/cache' /system' pratically everything (note that I had the same problem of mounting when I was able to boot into Android)
Click to expand...
Click to collapse
learn to crawl before you run :angel:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Matiosse said:
Well I rooted 4 different android device and not a single one of them wasn't able to mount anything in recovery mod. I knew exactly what I was doing until I got in the recovery mod who won't even recognize my internal storage meanwhile I was able to perfectly boot in Android
Click to expand...
Click to collapse
dude - you can't boot into android anymore, you can't boot into fastboot to your own accord - yet you try to sideload stuff in twrp for what ever reason.
i gave you more hints and tips in my previous posts and link to get it to work yet it eems you did none.
so don't get me wrong - but what excactly is your goal here?
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Matiosse said:
My goal is to get it working again...
I don't know if you've been reading my post but I did try everything you told me without sucess.
None of the tips I tried got me adb or fastboot working the sideload mode of TWRP doesn't work.
Click to expand...
Click to collapse
yes i read your posts - but im still unclear what you are trying to accomplish with sideload?
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?) "adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
-B
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Matiosse said:
ok from the start:
when in twrp - connect your tab to your laptop - is windows working with it (drivers ok?)
Windows isn't working with it, I tried Google usb driver, asus usb driver, universal adb driver, none of them work, this is where i'm stuck
"adb devices" shows the device? if yes - adb reboot-bootloader (or fastboot reboot bootloader, not quite sure atm since i'm at work without micro usb cable) when issued the command is the tab rebooting? - and if yes, is it rebooting into twrp or fastboot? what screen is shown after that?
Click to expand...
Click to collapse
when its connected - is device manager at least showing it as faulty or not at all? (yellow triangle exclamation mark thingy, i just installed asus on my VM) -> see attached file
UPDATE: I succeeded to go in fastboot mode
I couldn't get my tab to be recognized by windows so I installer my Nexus 4 using the toolkit, when it was succesfully installed I could manually install my tab since the "android devices" option appeared in the list when you want to manually install a driver in the devices manager. So I could choose Asus ADB interface.
Now I can boot into Android, but it will go into TWRP as soon as I restart my tablet.
Now I will try the link you sent me to get TWRP recognize my storage so I can flash a new rom, I will let you know if something go wrong.
Thanks for helping

[Q] Moto G doesn't turn on after unlocking bootloader HELP

Hello, I have a problem with my Moto G after unlocking the bootloader. Let me just post the basic info of the phone:
-Moto G XT1032 (16GB)
-Bought in UK Amazon, used in Slovenia
-Android version KitKat 4.4.2
I followed the instructions to unlock bootloader from the Motorola site. The cmd window is like this (pic in attachment) . The first time it rebooted it showed the warning sign at begginng and actually almost booted succesfully but then said com.android.proccess has stopped (something like that) so i turned it off and it automatically turns on again and it does show the warning that bootloader is unlocked and the motorola animation startup and after that the screen become black (but is turned on) and it's stuck like that. Please help my with any solution, because i just got this phone like a week ago and to have it bricked now would be just awfull. So yeah, please post any suggestions on how to fix this.
+I find out now that I am able to get into fastboot, if that helps. I don't know what to do if any of you do please help
Had a similar problem. I solved it by rebooting to bootloader and flashing a custom recovery. Try either cwm or twrp. From there i flashed cyanogenmod.
Gesendet von meinem XT1032 mit Tapatalk
wget21 said:
Had a similar problem. I solved it by rebooting to bootloader and flashing a custom recovery. Try either cwm or twrp. From there i flashed cyanogenmod.
Gesendet von meinem XT1032 mit Tapatalk
Click to expand...
Click to collapse
Thanks for replying! I'm sorry could you please be more specific on how to do that, i'm still a noob at doing this stuff
How to get to fastboot mode
Keep in mind, that vol up is the enter key in fastboot mode and power button will turn your device off. When you are in fastboot mode you can connect the phone via USB and you should see "usb connected" or something similar popping up. You can also list the connected devices with
Code:
fastboot devices
Once you're in fastboot mode install a recovery.img. Either twrp or cwm.
You can flash it with:
Code:
fastboot flash recovery recovery.img
And finally boot to recovery by selecting it in fastboot mode.
Then you can copy cyanogenmod or another rom with adb:
Code:
adb push C:\path\to\rom.zip /sdcard/
Then flash the rom by selecting "install zip", "choose zip from /sdcard/" and selecting 0 and the rom you just copied over.
Edit: you might find this useful if you dont have adb + fastboot already set up.
Edit: also you should put recovery.img and rom.zip in the same folder as adb and fastboot (will make the path thing obsolete).
wget21 said:
Had a similar problem. I solved it by rebooting to bootloader and flashing a custom recovery. Try either cwm or twrp. From there i flashed cyanogenmod.
Click to expand...
Click to collapse
what are you refering to with "rebooting to bootloader"?
tenjou_89 said:
what are you refering to with "rebooting to bootloader"?
Click to expand...
Click to collapse
Bootloader or Fastboot mode.
You can go into this mode by turning the phone off, then press and hold Power + Vol down buttons for about 3-5 seconds.
Alternatively, if you have ADB working, you can type in your command prompt: adb reboot bootloader

[Q] Stuck in boot loop, can't detect in ADB or fastboot

Hey guys, I really need some help here, I'm not good at any of this stuff - my OPO just randomly got stuck on a boot loop, I have never played with the USB debugging or any of that or tried to flash anything else, I was using just stock cyanogen.
I've been reading around and I've downloaded all the drivers but still can't detect the device when I do the Shift + Right Click --> Run CMD "fastboot devices" or "adb devices".
I never enabled options such as the USB debugging or anything else, can someone please help me out? I'm really clueless to all of this stuff.
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
jchen221 said:
Hey guys, I really need some help here, I'm not good at any of this stuff - my OPO just randomly got stuck on a boot loop, I have never played with the USB debugging or any of that or tried to flash anything else, I was using just stock cyanogen.
I've been reading around and I've downloaded all the drivers but still can't detect the device when I do the Shift + Right Click --> Run CMD "fastboot devices" or "adb devices".
I never enabled options such as the USB debugging or anything else, can someone please help me out? I'm really clueless to all of this stuff.
Click to expand...
Click to collapse
joanquro said:
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
Click to expand...
Click to collapse
This, except that's the wrong button combo (power + volume down is for recovery). Use power + volume up to get to fastboot mode and then try the "fastboot devices" command.
Heisenberg said:
This, except that's the wrong button combo (power + volume down is for recovery). Use power + volume up to get to fastboot mode and then try the "fastboot devices" command.
Click to expand...
Click to collapse
I'm sorry for this mistake.
joanquro said:
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
Click to expand...
Click to collapse
Thanks for your advice. This is the big problem I'm having, I've downloaded the SDK slim, and the driver manager and the 15 second installer things and installed all of them but still can't manage to detect my phone on fastboot.
jchen221 said:
Thanks for your advice. This is the big problem I'm having, I've downloaded the SDK slim, and the driver manager and the 15 second installer things and installed all of them but still can't manage to detect my phone on fastboot.
Click to expand...
Click to collapse
What command are you using while in fastboot mode?
Heisenberg said:
What command are you using while in fastboot mode?
Click to expand...
Click to collapse
I'm using both
fastboot devices
adb devices
Fastboot devices comes back with nothing in the CMD box, ADB devices gives a message that says 'Devices:' but there are none listed.
jchen221 said:
I'm using both
fastboot devices
adb devices
Fastboot devices comes back with nothing in the CMD box, ADB devices gives a message that says 'Devices:' but there are none listed.
Click to expand...
Click to collapse
There's no point in using adb commands in fastboot because only fastboot commands work. What drivers do you have installed?
XDA Moderator
Transmitted via Bacon
Heisenberg said:
There's no point in using adb commands in fastboot because only fastboot commands work. What drivers do you have installed?
XDA Moderator
Transmitted via Bacon
Click to expand...
Click to collapse
I've looked around for all sorts of drivers, I have the universal ADB, android SDK slim or something, is there a specific one I need?
jchen221 said:
I've looked around for all sorts of drivers, I have the universal ADB, android SDK slim or something, is there a specific one I need?
Click to expand...
Click to collapse
Uninstall whatever drivers you have installed, reboot your PC, install these drivers, reboot your PC, connect your phone, test fastboot (fastboot devices).
Heisenberg said:
Uninstall whatever drivers you have installed, reboot your PC, install , reboot your PC, connect your phone, test fastboot (fastboot devices).
Click to expand...
Click to collapse
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
jchen221 said:
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
Click to expand...
Click to collapse
I can't remember what capabilities the stock recovery has, but if it's there it's worth trying.
jchen221 said:
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
Click to expand...
Click to collapse
Heisenberg said:
I can't remember what capabilities the stock recovery has, but if it's there it's worth trying.
Click to expand...
Click to collapse
I managed to get it to work after resetting a bunch of the options, thanks so much for your help with this (even if I didn't get it to fastboot mode)
I have the same problem.
jchen221 said:
I managed to get it to work after resetting a bunch of the options, thanks so much for your help with this (even if I didn't get it to fastboot mode)
Click to expand...
Click to collapse
Hey bro, I have the same problem. Can you please explain me how did you resolve it? This would be of great help. Thanks.
pavanakshay said:
Hey bro, I have the same problem. Can you please explain me how did you resolve it? This would be of great help. Thanks.
Click to expand...
Click to collapse
for me too bro same problem please help me
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Heisenberg said:
Uninstall whatever drivers you have installed, reboot your PC, install these drivers, reboot your PC, connect your phone, test fastboot (fastboot devices).
Click to expand...
Click to collapse
i too having the same problem bro the driver link is not working please send me the link thankyou in advance
i am also facing the same problem that phone loops into fast boot mode whenever turned on i do totally every kind of drivers softwares and etc like tenorshare but all in vain i guess at last that phone must be enabled usb debuging in order to be detected as a active adb device,i pratically do this stuff by using another phone with enabled debuging and it was an active device andd can be processed further but when i disabled the usb debugging of same phone it was not working with adb interface i hope you understand,,,,but a miracle happenend i removed the battery for about a week and suddenly i pluged and try to turn it on hola it starts from roms boot logo
HELP!!!!! Stuck on bootloop and fastboot not working
i was flashing twrp on infinix s4 withfast boot. after flashing the device is stuck on bootloop. the recovery is not accessible (i press the key combo nothing happens) and fastboot combination is also not working. i tried connecting it with adb cmd and ran the command "adb reboot bootloader" but no device is detected.
ps: the link for drivers is broken

bricked shield?

hi guys,
i my shield is stuck on the nvidia logo when booting normally, if it brings up the bootloader, it shows unlocked but hitting continue caused it to freeze on the screen, recovery freezes on nvidia logo and fastboot protocol just brings it back to this screen. i orginally installed twrp and it confirmed successful flash of new os .... on reboot it bricked to its now state, i cant get into twrp or get my pc to see it to install a new copy
anyone got any ideas
thanks
@Fairmax don't click continue, it freezes because there is nothing to continue to, as long as you can enter bootloader your device isn't fully bricked. So, to fix your problem you will have to download official ROM from nvidia's site (https://developer.nvidia.com/shield-open-source find your model and click recovery images).
When you download latest ROM unzip it and follow the textual guide, but, there will be one file missing (i can't remember which one, user data maybe or something like that), don't worry and just continue with the next step. After you flash just reboot to system by holding power button. Good luck !
i cant seem to get it to be recognised by windows all i get is this-- Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.--
trying to install nvidia usb driver via have disk bring up an error that the file is not usable with x64 system
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Fairmax said:
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Click to expand...
Click to collapse
Which command did you type in?
fpozar said:
Which command did you type in?
Click to expand...
Click to collapse
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Fairmax said:
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Click to expand...
Click to collapse
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
fpozar said:
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
Click to expand...
Click to collapse
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Fairmax said:
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Click to expand...
Click to collapse
You can also try flashing twrp and then lineageos or something from twrp.
fpozar said:
You can also try flashing twrp and then lineageos or something from twrp.
Click to expand...
Click to collapse
good news after a few hours of trying (usb dropped connection a few times then battery died) it finally works again .....been over 2 years since iv had this shield running after nvidia did the recall , now goto put a different rom on there so it dosnt update and kill itself
Hello I had a similar issue with my k1 tablet and ended up flashing factory images via adb fastboot and all flashed fine. Now my tablet is stuck on the boot screen with the green and white nvidia logo. How long does it take to boot please?
I have same issue too. I can load TWRP and flash the other partitions but TWRP shows un-mountable partitions and even a full stock ROM flash will not allow it to boot. I have a similar issue with a recall tablet. what did you do to fix it?

OnePlus 6 won't power on, it only vibrates (nothing on screen)

Hi, I have a OnePlus 6 that was running Pie Beta 3. Yesterday it rebooted on it's own and kept going to qualcomm crash dump mode. At that time, I was able to get into FastBoot but not recovery. I then used the MSMDownload Tool which completed successfully but now it only vibrates with a black/blank screen when I try to turn it on. If I keep holding the power button down, it vibrates every 3 seconds or so. Now I can't get into recovery or fastboot. The only thing I can do is see my phone in device manager by holding down vol+ when connecting it to my laptop.
Any ideas would be appreciated.
Thanks!
Update, now it keeps taking me to fastboot mode every time I turn it on (even while only pressing the power button). I still can't get in Recovery mode.
If you're in fastboot, you already won.
Get TWRP on the start (preferably from eng.stk) > plug in to your PC > fastboot boot twrp.img
You can also find the Stock boot image and run it, see if that helps. fastboot boot <whicheverfile>.img
matteosaeed said:
You can also find the Stock boot image and run it, see if that helps. fastboot boot <whicheverfile>.img
Click to expand...
Click to collapse
I found the stock image but I'm not sure how to put it on the phone with fastboot. Is there a tutorial some where?
I knew to all this stuff.
Thanks in advance!
Patrick
preilly44 said:
I found the stock image but I'm not sure how to put it on the phone with fastboot. Is there a tutorial some where?
I knew to all this stuff.
Thanks in advance!
Patrick
Click to expand...
Click to collapse
It is easy, you do not need to put it on the phone
You'll use this in cmd
fastboot boot (filename).img
Have you used fastboot before ?
matteosaeed said:
It is easy, you do not need to put it on the phone
You'll use this in cmd
fastboot boot (filename).img
Have you used fastboot before ?
Click to expand...
Click to collapse
Unfortunately, I have not used Fastboot before. I did install it with ADB but that's it.
I just connected the phone (device manager shows it's connected) and typed fastboot devices and it doesn't show any. I also tried fastboot boot filename.img and it just sits there "waiting for device" (even though DM shows it connected).
Any help would be appreciated. OnePlus remoted in and used the MSM tool which was successful but it still wouldn't boot so they told me to RMA it which will take about 10 days. I'm hoping to avoid that.
preilly44 said:
Unfortunately, I have not used Fastboot before. I did install it with ADB but that's it.
I just connected the phone (device manager shows it's connected) and typed fastboot devices and it doesn't show any. I also tried fastboot boot filename.img and it just sits there "waiting for device" (even though DM shows it connected).
Any help would be appreciated. OnePlus remoted in and used the MSM tool which was successful but it still wouldn't boot so they told me to RMA it which will take about 10 days. I'm hoping to avoid that.
Click to expand...
Click to collapse
Send me a message. I'll see what I can do.

Categories

Resources