Hello all,
I have a problem with a Z3, when "i" take (my wife, i have a Note 3 ) a photo with the flash, i have a halo on the right. I know that the Z1C was the same problem ...
What is the solution ?
Which has the same problem here ?
Thank you
To you have a case on the phone ?
Please post questions in the Q&A section
Thread moved
alino06 said:
Hello all,
I have a problem with a Z3, when "i" take (my wife, i have a Note 3 ) a photo with the flash, i have a halo on the right. I know that the Z1C was the same problem ...
What is the solution ?
Which has the same problem here ?
Thank you
Click to expand...
Click to collapse
Cases can do this, and rear screen protectors that cover the flash can too.
x017in said:
To you have a case on the phone ?
Click to expand...
Click to collapse
No case of course and the phone has just been unpacked ...
Hum ... When i use a case with the phone i dont have the problem ...
Like we said in french "bizarre bizarre"
alino06 said:
No case of course and the phone has just been unpacked ...
Click to expand...
Click to collapse
Why "of course"?
Post some example pics, perhaps it'll be clearer then.
Yeah mine did the same on the weekend, I wasn't sure initially if it was the flash or a bright light off to the right of my shot, so I turned the flash off and the issue went away confirming it was from the flash. What is happening here is that the ISO sensitivity is was too high with the flash.
The best way to combat this issue, is to set the camera settings to manual, and keep the ISO as low as possible to get the shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are some extreme examples, the first with flash ISO800 the second with no flash ISO3200.
Those having bleeding problems l, it coupd be to do with light bleeding under the back panel, I smashed mine and got a replacement and it happened to me. The back panel was not secure so I reapplied it and now it has gone.
Just out of interest try putting a bit of pressure around the lens when you take a shot and see if the problem is still there.
jkr284 said:
Those having bleeding problems l, it coupd be to do with light bleeding under the back panel, I smashed mine and got a replacement and it happened to me. The back panel was not secure so I reapplied it and now it has gone.
Just out of interest try putting a bit of pressure around the lens when you take a shot and see if the problem is still there.
Click to expand...
Click to collapse
The same happened to me now, got the bleeding after it was repaired in a store.
How did you make sure, the lens is secure? Just by pressure or did you heat it or added extra glue or something? :silly:
Related
Hi i have to change the touch panel due to a big scratch,anyone here know if i have to disassembly all the phone?Or else someone with a service manual?
My phone was out in the rain for a bit so my digitizer is all messed up. Only thing I can do is touch the bottons on bottom. Not much function in the touchscreen besides that. Have ordered a new digitizer and will hopefully get it by the weekend or next week. Can report back how it goes with the disassembly or have you already done yours? Please give a report on how to do it if that's the case.
I m still waiting for mine from hong kong.look s like someone else had changed the syntetizer in the forum,but i had no reply to my question
Ok. I guess we'll have to wait and see who gets his first. Whoever does though it would be nice with a report on how it went.
Hi i ve received the touch panel,but i tried to disassembly the phone,but i can not get the cover to open.I unscrewed the 5 screws on the rear but the cover is as strong as before.Have you ever tried to disassembly our phone?
And the touchscreen i received it s not the new one but the old engineering example,i think it s the same but i want to try the respone so i can give the seller the positive or negative feedback.The panel differ from the classic one for the acer logo on top right,not at the bottom center,and...there is the trasparent hole near the headphone for the front camera as you can see from this old sample picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this is mine
I read in the screen replacement forum. There are two more screws at the left and right sides of battery house.
Hope that helps. The guy in hongkong that sent me the digitizer sent it by registered air mail first but sent another one by EMS so hopefully i'll have it this week.
Ok i ve found the way by myself,it s not so difficult,i ve seen the two screws after...You have only to pay attenction to not force too much the plastics when you try to open the cover and when you try to detach the touch panel.The best way is to use a guitar plectrum and start to open from the bottom right,for the touch you have to go carefully.Now i ask in the forum if they need a guide with high res photos,because i ve taked pictures with my nokia n95
Well I would be really interested in seeing the pictures. Please do share. How's the new touchscreen working out ?
You can see my guide in the general section,maybe will be sticked.The panel is working good,but it seems a little less sensitive than the official oem one.Maybe the engineering sample is a little different.In plus the light from the touch keys is not diffused good,and i have an hole for the front camera,wich is not present in retail s200.But if you go to the guide you can see pictures
I have now changed my digitizer and thanks to your guide it went pretty smooth. Was done in about 10-15 mins. I got the oem one but the buttons on the bottom is diffuse as you said yours was. maybe i can move the white from the old one to make it nices. Probably won't bother though. Don't really find a difference in response from before the change.
A few weeks ago my Sensation screen turned to colorful pixel snow. After opening the sense lock ring and flipping the main screen for a few times it became ok. A week later it went back to the snowy screen permanently.
I went to recovery and re installed the Rom (revolution 6.80) and the problem was solved. A week later I got the snowy screen back, but now the snow appears the very first moment the device is powered on.
Due to the face I had airdroid on the device I managed to connect it to the computer and see the mobile screen on the computer and it looked as if everything is ok, I could see the sense and all the screens and operate all the applications by looking at the computer and touching the snowy screen.
I bought a new screen and connected it instead the original and I still got snow....so I know it's not a screen problem.
I do not have warranty on the device and local labs will charge half the price of the device for fixing it, so I prefer to find out what's the problem and but the parts myself and replace them.
Anyone has any experience with such a problem and fixing it?
Thanks a lot
Try using a blower, those that people use to blow off dust, blow off every spec of dust you can see on your device, clean the connectors of the screen too.
Then, try installing a rom which is not ARHD, and test it out. If all these doesnt work, it might be your GPU hardware is faulty.
I already cleaned all the connection and checked that everything is connected correctly but it didn't help.
Do you know where the gpu seats? maybe if I knew what it looks like i could check problems around it or replace it.
No one knows how to solve the snow problem? :crying:
That's it? the device is dead? I used it only for one year...
Can you take a photo of it and post it?
Then we know exactly what you're talking about
sromer said:
Can you take a photo of it and post it?
Then we know exactly what you're talking about
Click to expand...
Click to collapse
Looks like that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow... I've never seen anything like that before. Hopefully someone else can help
maybe the connector of the lcd panel is disconnected a little bit.
I bought from Ebay defective Sensation, it has exactly the same problem.
Did you find what you HTC was wrong?
tanglang1 said:
Looks like that
Click to expand...
Click to collapse
That's what my screen looks like when the framebuffer memory allocation fails
Sultanxda said:
That's what my screen looks like when the framebuffer memory allocation fails
Click to expand...
Click to collapse
I'm also having the same snow problem on my HTC Amaze, for the above i assume there's no fix to this as i was about to purchase a new screen.
This phone is a complete lemon so perhaps it's a blessing
Seen that 2 days ago at a friends phone. No solution oder fix for that?
I have had the nexus 5 for about 6 months now, and i'm starting to notice a part of the glass coming off. The area around the volume buttons to the center of the screen makes a sticking sound when pushed down on, and i can feel it pushing in a little bit. It's most noticeable on the edge directly next to the volume buttons. There are no visible cracks as far as i can tell. Phone works fine besides this. Should I be worried and replace the screen or just let it be? I don't notice it if i don't push down too hard.
Never had this happen to me on a phone before. Thanks!
That definitely shouldn't be happening.
Mind sharing a photo?
Freshly baked from my Nexus 5
LewisGauss said:
Mind sharing a photo?
Freshly baked from my Nexus 5
Click to expand...
Click to collapse
It's not very visible and pictures don't show the problem.
It feels like the glue in that area is just dried up in that area and isn't holding down the screen correctly. but its only a small area so right now its not too big of a deal.
argran said:
It's not very visible and pictures don't show the problem.
It feels like the glue in that area is just dried up in that area and isn't holding down the screen correctly. but its only a small area so right now its not too big of a deal.
Click to expand...
Click to collapse
Ask for google support, they will replace it. Mine was losing the back cover letters and google replaced it
Hi all. Wasn't sure if I should reply to this old thread or start my own...
I have a Nexus 5 that's over 2 years old. So no warranty. It looks like my screen is starting to come off in the bottom right corner. I think it's just the glass. Take a look at the attached pic/video and let me know what you think I could/should do. You can see I can move it by pressing on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works fine otherwise. Touch/display etc seems all fine. I don't care about this problem if it stays as-is, but I'm worried it will get worse and come off further.
I'm thinking a bit of super glue would do? .
Thinking the sameā¦
image with no flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image with flash
I replaced the back glass cuz it was broken and the new one is not glued right on the camera side. Can that be the case or there is a problem with my camera ?
I think it is just dust that gets inside the back glass in the camera but I'm noit sure :/
Its called flashbleed, when material around camera leed flash light near camera sensor.
Probably this "replaced" glass its higher or in same level as camera lens, and it takes light as light flash turn on.
Solution is to replace it with original part, or to glue it better. But i would advise to repair it with original parts only.
electrash said:
Its called flashbleed, when material around camera leed flash light near camera sensor.
Probably this "replaced" glass its higher or in same level as camera lens, and it takes light as light flash turn on.
Solution is to replace it with original part, or to glue it better. But i would advise to repair it with original parts only.
Click to expand...
Click to collapse
Thank U for Your reply
So now if I take it to my local Sony branch I should just ask them to replace it with original part. and not ask them about the camera, and this problem will be fixed as result of the replacement of the glass ?
And these shadow dots aren't visible in my first pictures cuz I took pictures of a black object. What is their problem ?
Well honestly, for this i have no rational explanation. Only i can advise is to clean it with soft fabric material on both side.
So know one knows what cause the dots ?!
I Tried cleaning it but it still there
HussainJH said:
So know one knows what cause the dots ?!
I Tried cleaning it but it still there
Click to expand...
Click to collapse
That looks like dust on the sensor (deep inside the phone - you won't be cleaning that yourself)
https://photographylife.com/how-to-spot-dust-on-your-dslr-sensor
Look at the picture of the bird. The smaller the aperture the smaller and more noticeable the black circles.
As title says, the backlight started shining through on my U11+.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happend today, i was on my phone. i put i down to go get something to eat and when i came back the bleed came. it's around the entire screen.
i haven't contacted HTC yet because i wanted to ask you guys and get your opinions first.
i haven't dropped it, i haven't thrown it after somebody. i've been looking after it.
Sorry for the unacceptable quality on the picture, it's taken with my work phone.
That's not good. RMA it if you can.
Did you get yours repaired? My u11 plus just did the same thing today. I am wondering if too much squeezing the edge sense warpped the screen.
jaylo2003 said:
Did you get yours repaired? My u11 plus just did the same thing today. I am wondering if too much squeezing the edge sense warpped the screen.
Click to expand...
Click to collapse
No i Didn't. It "fixed" it self. it's actualy done it a couple of times now and i have never used the squeez fuction.
HrBorggreen said:
No i Didn't. It "fixed" it self. it's actualy done it a couple of times now and i have never used the squeez fuction.
Click to expand...
Click to collapse
It happened to me too: I was watching a film, checked phone and it presented the same symptom, but in always on display. Rebooted and same problem. After a little time (just 10 minutes or down there).
I am using edge function and it is no longer happened .
DHD22800 said:
It happened to me too: I was watching a film, checked phone and it presented the same symptom, but in always on display. Rebooted and same problem. After a little time (just 10 minutes or down there).
I am using edge function and it is no longer happened .
Click to expand...
Click to collapse
I think the last time it happened to me was in January.
It's a bit bizzar that it comes and goes like that, I still haven't figured it out what's causing it.
But it doesn't seem to be a problem any more so I'm not worried.