My N900 got bricked and it cannot get pass the Samsung's boot logo (the static one, not the animation one).
- I had been using rom cook alba19986's UltraLite XXUENI1 on my rooted Note 3 before, all things work perfectly.
- Then I flash kernel Halaszk v0.20 beta, but Synapse didn't work ("No UCI support"), so I flash kernel Halaszk v0.17 in recovery mode. And that's it, the problem occurred.
- Then I got stuck in bootscreen, it went to "Samsung Galaxy Note 3" boot logo and stopped there, I waited but nothing was gonna happen.
- I came back to Recovery Mode, did a full wipe/factory reset, wiped cache, davik cache. But it's no uses.
- I freaked out, so I re-flash Dr.Ketan's K14 rom, TR-ROM T22, alba19986's rom (Full wipe) successfully, but the bootloop happened: the phone continuously rebooted nonstop.
- I tried to flash stock kernel, stock modem in Dr.Ketan's rom (by his MultiTools), but it didn't help.
- Then I downloaded Note 3's stock roms (from SamMobile), which are N900XXUDND1 (contains 4 files inside) and N900XXUDNC1 (5 files inside, one of them is PIT file), and went to Download Mode, flash them via Odin PC v3.10. There was no fail. But the bootloop doesn't go away, even though I did a wipe data/cache (now it returns to Samsung's stock recovery mode)
Please tell me if there's anything that could help me get out of this situation.
I did read the thread here, and here, but my situation might be a bit harder.
Thank you.
You may wish to post in Galaxy Note 3 Q&A, Help & Troubleshooting so that the right experts may be of help.
Perseus71 said:
You may wish to post in Galaxy Note 3 Q&A, Help & Troubleshooting so that the right experts may be of help.
Click to expand...
Click to collapse
Thank you Perseus71, I've just posted a new thread in there as you suggest. Could you please delete this thread please. Thanks.
Thread Closed. Thank You.
Related
Hello everyone, I own a Samsung galaxy tab 2 (gt-p3100).
I rooted my device and installed a custom recovery(cwm 6.0.2.7) on it around 5 to 6 months ago but kept the stock firmware(android 4.1.2_India) as it was and the device was working perfectly then onwards.But now from few days all of a sudden my device automatically restarts after a time of 50 to 60 secs after completely booting up the firmware.I thought it is a problem with my stock OS and so I tried to flash the Carbon Rom(an4.4) and Slim rom(an4.4.4) but got STATUS 7 error,after reading some posts it came to my notice that i will have to update the custom recovery in order to flash kitkat roms .So, I tried flashing cwm 6.0.5 and philz 6.07.9(tried both methods...through ODIN and through my sdcard) and every time flashing custom recovery is successfully done.But when i again enter in my device's recovery mode it shows cwm 6.0.2.7 and nothing is updated .SO, as nothing worked I decided to flash the original firmware again through ODIN which got stuck at around 60% and gave an error message(FAILED!) in odin. Tried installing stock firmware(IND and EUROPE) 2 times through ODIN but encountered the same problem.
Any help regarding this topic would be appreciated.
Hi there,
You must post/read in the dedicated forum for this device here:
> Samsung Galaxy Tab 2 > Galaxy Tab 2 Q&A, Help & Troubleshooting
or ask directly in this thread: The Galaxy Tab 2 Help Thread [Ask Any Question!
Good luck
Thread closed, thank you.
i hope someone can help me with this...
Last night my note 2 restarted by itself and got stuck on the Samsung logo. ive flashed a new firmware with Odin and it succeed.
now when i want to go to recovery mode it shows the teamwin.img and thats it... it wont go to the recovery mode. ive flashed a new recovery package/rom and it shows succeed as well but still cant go to recovery mode. only teamwin logo.
i really appriciate all help...
Hi,
If you flashed stock firmware again with Odin, twrp should be gone, and Stock recovery should have been restored. So I suggest you didn't flash the full firmware, or it was modified firmware.
Also, you could try flashing CWM Recovery instead for your device, or a different twrp version even.
Any help on anything further, please ask in this dedicated help thread for your device,
> Samsung Galaxy Note II GT-N7100, N7105 > Galaxy Note II Q&A, Help & Troubleshooting > [NOOB FRIENDLY] Ask the question! [N7100 and other variants]
Good luck!
Hello guys, i really need help.
I've got Galaxy S Duos 2 (GT-S7582), Pre-Rooted firmware, I've installed custom kernel and the phone can't turn on anymore (can't boot). It can get into the DOWNLOAD MODE and custom recovery mode (CWM). Using Odin I can flash firmwares but the phone freezes at the SAMSUNG GALAXY S DUOS start screen. In the upper left corner there is a RED EXCLAMATION MARK and the phone is not turning on (not booting).
Pls tell me what to to, i'm desperate
Hi,
Here is a dedicated thread for your device .... I am thinking you meant gt-s7582??
If so, read the first page of this thread very carefully... And try flashing stock firmware again,
http://forum.xda-developers.com/showthread.php?t=2776425
If you have more questions, you could try asking there, or here....
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Yes it's GT-S7582, my bad.
I'tried to flash with Pre-rooted ROM, and it' didn't work, i also tried to flash with some kind of custom rom (S5 themed) and it' didn't work.
At the end, i downloaded official firmware (S7582DDUAND1_S7582ODDANC1) and flash with it, and the red exclamation mark is gone, my phone is booting, and working like a new.
Thanks for help
Awesome! Thread closed. ?
Is there any modified recovery I can flash form ODIN/Heimdall and that will boot into itself by default? Device is I9300.
Short version of problem: Stuck in bootloop, no way to enter recovery. Flashing stock ROM = still bootloop.
Long: After downgrading BlissPop 5.1.1 to an earlier version I got into a bootloop (due to not wiping everything that I should have properly).
Was rooted and had CWM recovery.
Flashed stock ROM 4.3 (NEE-I9300XXEMG4-20130809155048). But now I have bootloop with this ROM instead. Flashed again, same thing. Flashed an earlier version. Also flashed the original 4.0.4. Waited 10 minutes more with every bootloop, pulled battery.
Can't enter recovery to wipe due to power switch beeing physically scraped off from the logic board. Cell phone repair guy could not solder on a new power switch, nor was he able to put electrical current into it by a cable. So repairing is out of the question.
Found some info about how to enter download mode and from there get into recovery by pressing button combination, this does not work for me.
I can get into download mode by using USB JIg. I can also start the device by inserting it and removing after 1-2 seconds.
Is there an alternative way to perform a wipe? How do I get out of this mess?
Doesn't ODIN performed a wipe when flashing stock ROM?
How do I take Blisspop and make it flashable from ODIN?
Hi there,
You must ask in the dedicated forum for this device, but first you must see what exactly model of S3:
Here is general forum for Q&A dedicated to Galaxy S3 I9300/9305:
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting
Or ask directly in this thread: [HELP THREAD] Galaxy S3 Ask any question.
Good luck
I tried flashing a rom using Safestrap (obviously didn't read into everything enough :/ ) So I seem to have hard bricked my device. I have no recovery, I either turn it on and get stuck at the samsung note 3 logo or the Odin Downloader. I've tried flashing the stock rom using Odin and it gets stuck on oboot (or something?) and doesn't move. I'm assuming because USB Debugging isn't on because I can't turn it on since there's no ROM installed? lmao.. Any help appreciated.
Hi,
Try posting your question here:
Verizon Galaxy Note 3 Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!