Related
flash it with clockwork
download: http://www.sdx-downloads.com/devs/noobnl/noobnl.andromeda.kernel.v1.4.1.zip
or
older aka one click version ( extract new kernel & just replace zimage in the main dir)
download: http://www.sdx-downloads.com/devs/noobnl/one.click.andromeda.flasherv1.3.0.zip
1. you need samsung galaxy s drivers
64-bit OS http://db.tt/mQv4SX
32-bit OS http://db.tt/8u6HeG
2. push MENU, select Applications > Development, then enable USB debugging.
3. extract and run run.bat
4. enjoy!
Features:
Codesourcery G++
Busybox, thanks joeykrim
Remount, thanks joeykrim
superuser.apk with su!
-O3 optimization
Cortex a8
ClockworkMod Compatable Kernel
kernel sources: http://www.sdx-downloads.com/devs/noobnl/andromedakernelsources.zip
*******changelog*******
v1.1 fixes root access, properly removes joeykrim root
v1.1.1 removes additional files
v1.2 broken build
v1.2.1 fixes build number & Cortex a8 with NEON Optimization
v1.2.2 took away neon optmization
v1.3.0 rebuild the modules with cortex a8 & -O3 optimization & enabled ThumbEE in the kernel
v1.3.1 ClockworkMod compatible Kernel!
v1.3.2 fixes broken root and fixes busybox permission
v1.3.3 adds superuser.apk!
v1.3.4 fixes the move superuser.apk to system & fixes a flaw with jk-su
v1.4.0 based on di18 kernel!
v1.4.1 prototype tvout (start a shell & type in "start tvout"
Code:
make -j$CPU_JOB_NUM HOSTCFLAGS="-g -O3" ARCH=arm CFLAGS_KERNEL="-O2 -march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8" CROSS_COMPILE=$TOOLCHAIN/$TOOLCHAIN_PREFIX
uninstaller: http://firon.net/xda/one.click.stock.flasher.&.root.uninstaller-di18.zip
my github: http://github.com/noobnl/]
Link to the stock samsung source that was used for these kernels.
http://opensource.samsung.com/ Please search for SPH-D700 DI18.
Do I need to root first or does it root when I flash and what does it exactly do. does it remove my programs or anything like that?
Thanks in advance
Excuse me but if I used your old method of rooting. Does this still work?
Updated without any problems. I assume that most of these "improvements" are more under the hood than stuff that would be noticable to the average user. Thank you for your work. I hope we get more talented people on this project. Of coarse this project didn't "explode" with new stuff multiple times a day, there's only a small fraction of people working on it. Once again, I wish I could help with something to get the ball rolling better, but I don't know how to code and I'm no linux guru either.
Helping finding bugs, giving help to people trying to do whatever, and giving feedback is contributing.
herbthehammer said:
Updated without any problems. I assume that most of these "improvements" are more under the hood than stuff that would be noticable to the average user. Thank you for your work. I hope we get more talented people on this project. Of coarse this project didn't "explode" with new stuff multiple times a day, there's only a small fraction of people working on it. Once again, I wish I could help with something to get the ball rolling better, but I don't know how to code and I'm no linux guru either.
Helping finding bugs, giving help to people trying to do whatever, and giving feedback is contributing.
Click to expand...
Click to collapse
Yeah I updated with no problems also.
Also, this is VERY important. If you have Auto Mount, you need to dismount the SD Card in order for this to work.
What is -03 optomizations? And is this a different version than you posted last night at sdx
Sorry for the dumb question, but what's the difference between this and "one click root"? And could someone please explain what installing one the these modified kernels do? Thanks.
jarnail24 said:
Do I need to root first or does it root when I flash and what does it exactly do. does it remove my programs or anything like that?
Thanks in advance
Click to expand...
Click to collapse
x2 been wondering this myself
specialk0324 said:
x2 been wondering this myself
Click to expand...
Click to collapse
It will Flash a Custom Kernel. Which will give you root access. It wont delete anything.
This is updated? Can we just run it again or should one remove then re-install
Well re-ran it doesnt seem to cause any harm lol
I had # at one point when doing ADB shell but now I get $
updated!!!!
noobnl said:
updated!!!!
Click to expand...
Click to collapse
Awesome work as usual. couple questions.
1. I know you have busybox included but its an older version "current "1.18.0" and I can not get that to install after doing your kernel. If I use just he exploit method I can ugrade it via the market.
2. The version number is still reading V1? do you plan on changing that with updates so we can tell what we have installed for us dumb peoples lol
Thanks so much donation coming your way
Worked with a hiccup but it must've been my fault. Other than that, awesome job my friend.
noobnl said:
updated!!!!
Click to expand...
Click to collapse
As stated here is your Redbull fund for the week hopefully its enough to get some more work done! lol
1XH33015CN7654102.
Fixter said:
Worked with a hiccup but it must've been my fault. Other than that, awesome job my friend.
Click to expand...
Click to collapse
Same here, I hope we are able to tell which version is which in the future.
Just ran Linpack, I got 8.0 nothing above that...hmmm how can I check im running the right kernel?
1.2.0 was pulled! broken build
noobnl said:
1.2.0 was pulled! broken build
Click to expand...
Click to collapse
Noob. Please explain. Is the Flasher we ran broken? :S
I realize that you pulled 1.2 bc of broken build but when i try to d/l 1.2.1 zip link not there? is it just me?
says page not found
all for now I guess.... wonder if i should uninstall the 1.2 or just wait
This script, when called, will download lilstevie's kernel source, build the default configuration, and flash it.
Thanks to lilstevie for the whole Ubuntu on emmc.
Let me know how it works
UPDATES:
12.4.2011
-Updated to ver. 4
-Added update checking feature...
11.30.2011
-Update to ver. 1.0.1
-Fixed Grammatical Error
-Added git dependency in apt-get line.
11.28.2011
-Initial release
link:
austinconn(dot)us(dot)to/repository/kernelupdater.sh
(Reason I have to post link like this is because I haven't posted enough. Will change when able...)
atc3030
Thanks, makes life a little easier.
Actually, i have some commands which come in really handy when you use ubuntu on a tab.
sudo apt-get remove appmenu-gtk indicator-appmenu overlay-scrollbar liboverlay-scrollbar-0.1-0
This will remove the global menus and that annoying scrollbar so you have to use your mouse/trackpad less often.
*edit: Hard reboot right after the install-part.
*edit2 git was missing on my ubuntu-install. I'd suggest you to add it to your apt-get line.
looked at the script, nice
Although not that i think you care but you might:
echo "If all was done correctly, your kernel shoudl be upto date"
Click to expand...
Click to collapse
should
up to *two words*
Gonna update the script. what else do you guys want to see in it??? let me know what else would be useful and ill see about adding them
atc3030 said:
Gonna update the script. what else do you guys want to see in it??? let me know what else would be useful and ill see about adding them
Click to expand...
Click to collapse
Great work! It would be good if it could build the CIFS, TUN and NFS modules
mitchelln said:
Great work! It would be good if it could build the CIFS, TUN and NFS modules
Click to expand...
Click to collapse
If you can get me like a guide or something to do that, i would love to. im working on something else right now, but should be able to do that really quick. next update will have an update feature to automatically check for updates.
i know this is a noob question (i think you wil get more off them since the one-click installer for windows)
- how to correctly use this script
- will this affect the working off my dualboot configuration (for one click installer)
very excited for this. is there a guide for this script or can we just execute?
download the script, right click on the file and mark it as an executable under properties.
open a terminal, ch to the folder you´ve downloaded the script and run
$sudo ./kernelupdater.sh
I would love to get Linux Mint (any flavor, but considering our hardware, prob LMDE or LXDE is most realistic, although IDK if any debian flav is compiled for ARM?) built into a flashable image. Ubuntu is wasted on a machine with limited RAM and a non-standard file system.
I am not a developer, but I certainly would help as much as possible any person who would like to get moving and use our hardware to its fullest extent!
Like I said, any interested parties, please PM me.
Sent from my Transformer TF101 using xda premium
atc3030 said:
This script, when called, will download lilstevie's kernel source, build the default configuration, and flash it.
Thanks to lilstevie for the whole Ubuntu on emmc.
Let me know how it works
UPDATES:
12.4.2011
-Updated to ver. 4
-Added update checking feature...
link:
austinconn(dot)us(dot)to/repository/kernelupdater.sh
(Reason I have to post link like this is because I haven't posted enough. Will change when able...)
atc3030
Click to expand...
Click to collapse
This link yields not (even without the "(dot)" and all I can find on his site is html and a couple android APKs and zips. Can someone please repost the most recent kernel update/build script? Muchos Gracias
If anyone has this script lying around. Please pm me. I must have lost it in a data transfer
Sent from my DROID2 GLOBAL using Tapatalk
Here is a link to the file. I take no credit for the work, just reuploading it since the original version has been missing for a while now.
http://dl.dropbox.com/u/6990784/kernelupdater.sh
If u dont know what CIFS and TUN are,u probably don't need it
Instructions:
1)Extract the modules inside the zip to,say, /system/lib/modules
2)Fire up terminal and type this command
Code:
insmod /system/lib/modules/tun.ko
insmod /system/lib/modules/cifs.ko
Same procedure to load PPP Modules,just change the names
DONE!
Note:If u use above method ,u need to execute above commands on every reboot!
if u want to avoid that hassle,use an app on XDA called "MODULE LOADER"(Google it/Use Search) and bamm..done!
Regards
How did you compile those libs?
Would it be possible to port the liblights for BLN mod?
I tried to load the SII GT9100 libs and the original GT9000 ones but they don't work... or do I need a customized kernel for those?
wintel_mac said:
How did you compile those libs?
Would it be possible to port the liblights for BLN mod?
I tried to load the SII GT9100 libs and the original GT9000 ones but they don't work... or do I need a customized kernel for those?
Click to expand...
Click to collapse
These aren't libs,they are loadable modules compiled from source
manveru0 already tried BLN,he said that it freezes the phone..
try to load DHD liblights...who knows they might work!..of course with some changes in kernel(add bln.c).....pm me
i saw u posted in Droidzone's thread, so just to give u a lil tip, if u have any questions about kernels there is one guy to ask, snq- , he is the God of all kernel devs, i've had my desire for over a year and i saw most of his work, trust me the whole HTC community (not just the desire section) knows who he is
Hei,
what do i need to compile these?
i'm comfortable using ubuntu linux and compiling, but i need to compile the tun.ko for a honeycomb tablet.
are the general android sources from google enough or do i need device specific?
Can you give me short a step by step? (just the steps and sources, i have already compiled modules on my own for ubuntu)
thx in advance
is this tun.ko module works with openvpn? because i saw some blogs posted about this stuff and for tun.ko module to be worked with openvpn, it must be the same with the kernel....is this correct? please help me with this stuff...really appreciated it!
-corrupt1234
@corrupt:yes,this tun.ko is for openVPN
@cheefy:i will pm u when i come back from school
@rayiskon:i know that guy...he overclocked a phone w/o the kernel source.epic!
sakindia123 said:
@rayiskon:i know that guy...he overclocked a phone w/o the kernel source.epic!
EDIT:I will make a nice little 1-min video to compile modules!
Click to expand...
Click to collapse
It wasn't just about overclocking, he added modules, managed to fix the compass with a hack (bear in mind that even HTC couldn't release a fixed compass version), fixed 720p recording, all that on a closed source kernel . he also managed to get the sense 3.0 lockscreen (ring + 4 icons) to work on desire. not to mention his earlier work with extended power menu, battery circle icons etc...
Sent from my GT-I9001 using xda premium
sakindia123 said:
@corrupt:yes,this tun.ko is for openVPN
@cheefy:i will pm u when i come back from school
@rayiskon:i know that guy...he overclocked a phone w/o the kernel source.epic!
EDIT:I will make a nice little 1-min video to compile modules!
Click to expand...
Click to collapse
Owh, i see...so what if i use that tun.ko with your cranium rc5 rom? will it work on openvpn?
Thanks in advance.
-corrupt1234
@Corrupt Yes it should work!
Updated With PPP Modules! Kindly test if possible
sakindia123 said:
@Corrupt Yes it should work!
Click to expand...
Click to collapse
Hi again, dude, one question...is your tun.ko works with any stock roms like zksp and etc? i haven't tried with your ROM though, need to test with stocks first...i'll be happy if it works!!!!
corrupt1234 said:
Hi again, dude, one question...is your tun.ko works with any stock roms like zksp and etc? i haven't tried with your ROM though, need to test with stocks first...i'll be happy if it works!!!!
Click to expand...
Click to collapse
Of course it does
Ok, so i've downloaded your tun.ko and after hours setting up with openvpn....it's finally working. However, it doesn't connect to the Internet as it should be..so i've downloaded another openvpn installer by sasha from the market and guess what, it says tun/tap found but not working but everything else is fine. Sakindia, can you post like tutorial for newbie on how to put your tun.ko and do i have to put that tun.ko together with ciff.ko together? Thank in advance
They are independent of each other.And i think the instructions are pretty easy!
hi.
where is /system/modules ? in phone?
can i use adb for this ?
thx.
kamran k said:
hi.
where is /system/modules ? in phone?
can i use adb for this ?
thx.
Click to expand...
Click to collapse
yes and yes
Hi.
I can't find /system/modules/ in my phone!
I use with script manager. Do i make it and copy?
please help me, thanks
kamran k said:
Hi.
I can't find /system/modules/ in my phone!
I use with script manager. Do i make it and copy?
please help me, thanks
Click to expand...
Click to collapse
Well,i forgot!
U have to place them in /system/lib/modules
My bad!
I do It. but this modules not work, VPN is unable now.
my rom is [KPS]★Cranium RC6 Update #1
Introduction:
Well,After Some Devices Like the Galaxy ACE,SGS-SCLD,Fit and Gio today I present to You the Newer version of LagFree For SGS I9000 and It's Variants!
Lagfree Is not Just a RAM Manager It a Complete Script With a lot of Tweaks and Iprovements
Improvements:
-MinFree enabled
-Touchscreen sensivity increased
-Zipaligning apps while Booting
-Less aggressive settings for kernel
-Better VM management
-system tweaks
-Battery Life improvements
-Better Multitasking
-Database Tweaks
-Wi-Fi and NetWork Tweaks
-Kernel Tweaks
-A Lot More!!
Requirements:
-Android Gingerbread 2.3.x or Higher
-Root
-Kernel that supports init.d (like CF-Root,Semaphore,etc...)
-Ext4 lagfix if you want to use the remount script
How to install:
1-you need to have CWM4 or 5 installed
2-Download the flashable Zip
3-Reboot into recovery
4-Install Zip from SD card then choose Zip from SD card then choose
LagFree......Zip
5-reboot
6-Using Root Explorer Go to system/etc/init.d and Fix Permission to All for S91Supercharger and S95LagFree ,then Reboot and Enjoy!!
Credits:
-Thanks to The Great Scripter In SGS and XDA Community:
*Pikachu01
*Zeppelinrox
*Juwe11
-A Big Thanks to broodplank1337 For Helping Me a lot!!!
-Thanks to ChainFire Too for the TouchScreen sensivity Valories
-Any XDA Member That helps Me out in This Project
ChangeLog of All versions:
Changelog of All Versions:
-V1:Initial release of lagFree For SGS
-V1.1:
-Rewritted Script,(Major Update)
-Fixed errors,repetetion
-Optimized
-Reduced script size from 38Kb to 10Kb
-Add LagFree recovery
-V1.2:
-Fixed Issue That Make th script stoping when there is an error
-Fixed More Errors
-Added more Build.prop Tweaks on the Script
-V1.3:
-Compatible With Supercharger V6 and thunderBolt(LMK addon only)Use atteched File Witch is compatible
-Deleted very agressive Parameter in the script
-V1.4:
-Fixed Error:sys/Block/stl* and sys/block/bml*
-adjusted Build.prop Tweaks For SGS and It variants
-V2:
-Major Update
-Version Compatible With SGS and All it variants including SGS+
-LagFree Now is a Package
-Including a Tweaked Version of SuperChargerV6
-Automatic Zipalign Fixed
-SD card readahead is 3072Kb
-TouchScreen sensivity is in a New Script
-Fixed All Errors
-V2.0.1:
-Deleted LagFree Recovery as It was Only an experimental Feature
-Balanced Low Memory Killer Parameter Valories
-Many others Smalls improvements For Speed and Battery life
-V2.1:
-SDCardspeedfix is now on a new Script
-New tweak to remove lag when answering phone calls
-Fixed same small few issue
Reserved 2
Is it comlitable with ICS roms?
id_snake said:
Is it comlitable with ICS roms?
Click to expand...
Click to collapse
yes It's compatible With ICS Roms, If you Just read The OP,I said android 2.3.x or Higher
id_snake said:
Is it comlitable with ICS roms?
Click to expand...
Click to collapse
i agree. is it? haha
darkace007 said:
i agree. is it? haha
Click to expand...
Click to collapse
Yes!It is !!!
Will this make my phone dual core?
(Joke) thanks for the script
Sent from my SGH-I897 using XDA
slaid480 said:
Yes!It is !!!
Click to expand...
Click to collapse
THANKS! will try it out later hehehe. sorry didnt read the previous post haha. thanks man!
Ok I know this is probably a noob question. I apologize.
It's this a kernel? If not how does it work with a kernel like glitch, And ics?
I guess I need a little more info on how it works.
Sent from my GT-I897 using xda premium
shaker2k said:
Ok I know this is probably a noob question. I apologize.
It's this a kernel? If not how does it work with a kernel like glitch, And ics?
I guess I need a little more info on how it works.
Sent from my GT-I897 using xda premium
Click to expand...
Click to collapse
It's not a kernel but these are actually scripts which run when you start up your phone, and contain some code / commands which help your phone perform better. They need a kernel which is compatible with these scripts or is able to run these at startup. The kernel creates a folder called init.d, these scripts when you flash get copied to this folder and are executed at startup.
If you have used Semaphore kernel in any of the GB roms, you may have used the semaphore kernel settings, those settings did the same thing, they used to execute the scripts at startup and make our phones more awesome.
This flashable scripts will do the same thing.
anishmahadikz said:
It's not a kernel but these are actually scripts which run when you start up your phone, and contain some code / commands which help your phone perform better. They need a kernel which is compatible with these scripts or is able to run these at startup. The kernel creates a folder called init.d, these scripts when you flash get copied to this folder and are executed at startup.
If you have used Semaphore kernel in any of the GB roms, you may have used the semaphore kernel settings, those settings did the same thing, they used to execute the scripts at startup and make our phones more awesome.
This flashable scripts will do the same thing.
Click to expand...
Click to collapse
Thanks for Helping Him to understand How scripts Work
slaid480 said:
Thanks for Helping Him to understand How scripts Work
Click to expand...
Click to collapse
Actually thank you sir to bring these for us here.
so is this ok or recommended to use with Glitch Kernel at all?
pchemerys said:
so is this ok or recommended to use with Glitch Kernel at all?
Click to expand...
Click to collapse
Glitch does support scripts, you can use it, but i am not qualified to recommend it to you.
pchemerys said:
so is this ok or recommended to use with Glitch Kernel at all?
Click to expand...
Click to collapse
yes,it's recommended as Glitch Kernel dosn't use any init.d script by default !!
Am on THS B16 with Stock Kernel..
One Thing i wanna say is That my Battery drain has been gone off completely.
B4 i had battery drain rapid from 100 to 90% within 30min, even in standby..
Now 1hr 5min my battery is at 99%
Havent checked more.. Will Keep updating as i see a difference
By the Way. My Ram is about 90~70mb all time.. cant get more than 100
bondarun said:
Am on THS B16 with Stock Kernel..
One Thing i wanna say is That my Battery drain has been gone off completely.
B4 i had battery drain rapid from 100 to 90% within 30min, even in standby..
Now 1hr 5min my battery is at 99%
Havent checked more.. Will Keep updating as i see a difference
By the Way. My Ram is about 90~70mb all time.. cant get more than 100
Click to expand...
Click to collapse
About RAM,You need to Now That alot of apps= Less free RAM
V1.4 is Up
LagFree V1.4 is Up enjoy It!!
I did not think it was possible for my phone to be faster!
You guys continually amaze me!
Even with the vortex animations it's blazing fast!
Sent from my GT-I897 using xda premium
Hello guys,
This is a project I was working on for a kernel for our SGY.
I made it with a few things in mind:
>Improve it's performance
>Be universally compatible (after I nearly given up on trying to get a snappier CM11 and after the need for a snappier SGY, I decided to go back to GB. However, BML is terrible, and it is annoying to come back to. I decided to build a MTD kernel for Gingerbread then, and it works!)
>Experiment and upgrade as much as I can (thanks @robcore!!!!)
But since I lost my device, I cannot continue developing it. I am then releasing the source code (sorry, no flashable stuff, I deleted it long ago ) for any of you to continue(?) my work if your heart so desires.
If I ever get myself another SGY (or another BCM21553 device), I will gladly continue development (and support whoever does it too), but before I lose all my data and the kernel code alongside it, I am making it available.
This kernel features:
-OC up to 1040MHz (It's questionable even today if the bcm21553 OCs really work, but I tried hacking a way that works very similarly to MarocOS's one, maybe even better. Be warned though, the source around it is messy)
-GPU hacks for performance (Again, even I don't know if they do work, probably the values are just there to be seen, I'm not sure. I do know though that increasing the CPU speed will much likely increase the speed of V3D too)
-DVFS disabled (I found out DVFS is mostly the culpirit in the "832MHz crisis" where the kernel would forcefully scale itself to 832MHz, so I eliminated any reference to it in kernel code. Apparently DVFS on the processor is only available under the bcm21553 governor, but it is present on the other drivers as well. The idea for disabling DVFS came from my friend @robcore)
-A few additional governors and a buggy interactive governor (which is the default xd)
-MTD support for Gingerbread (Thanks Samsung Epic 4G! Although it only works on TouchWiz (I tried it with SL v2 and v2.1 and it works, but under NougatME(CM7) I got no success and loads of segfaults), it works ALMOST perfectly. See bugs for details )
-Some scraped source code from Samsung's FSR I found on the internet (barely compilable, though)
Bugs:
>Gingerbread version:
-IMEI won't appear in the Status screen, I also faced problems with non-working radio for calls. Data works just fine, but calling and receiving calls is unavailable. I believe it is EFS-related. My suggestion is backing up the EFS partition's file structure, then converting it to MTD, then restoring the backup.
-TWRP will crash and panic when exiting, a workaround is force rebooting
>ICS version:
-TWRP will crash and panic when exiting (I believe fixing it here will fix the bug above too)
>KitKat version:
-Flashing images fail randomly, you may also be unable to reboot normally if you do so. I tried addressing this but I couldn't get anywhere.
DOWNLOAD THE SOURCE: Here!
Thanks to:
@robcore - his development on the Snapdragon S4 breathes life on my dev soul!
@zman0900 - I saw his thread on an MTD TW kernel for the Samsung Epic 4G, which led me to believe MTD on GB is possible.
nice kernel
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
vdhero said:
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
Click to expand...
Click to collapse
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Building and fixing
sonickles9 said:
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Click to expand...
Click to collapse
I don't sure so I decided to build a kernel from your source and another cm9 version from Mohamad.Afaneh's source and I'll merge the audio on both of them for the best think to fix the bug.Thank you .
Link for kernel?
(img files...)(stock/cm9/cm11)
TheRealModder said:
Link for kernel?
(img files...)(stock/cm9/cm11)
Click to expand...
Click to collapse
Compile one for yourself,man. It only takes like 15-25 mins
vdhero said:
Compile one for yourself,man. It only takes like 15-25 mins
Click to expand...
Click to collapse
I don't know how to compile....
TheRealModder said:
I don't know how to compile....
Click to expand...
Click to collapse
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
vdhero said:
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
Click to expand...
Click to collapse
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
TheRealModder said:
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
Click to expand...
Click to collapse
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Sent from my Zenfone 2 Laser using XDA Labs
TheRealModder said:
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Click to expand...
Click to collapse
zlimage? We don't have that here, we only have boot.img for kernel
vdhero said:
zlimage? We don't have that here, we only have boot.img for kernel
Click to expand...
Click to collapse
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
TheRealModder said:
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
Click to expand...
Click to collapse
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
vdhero said:
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
Click to expand...
Click to collapse
Ok. If you want to install linux i recommend using ubuntu or linux mint.
Ubuntu official website:https://www.ubuntu.com/
Linux mint official website:https://linuxmint.com/
Sent from my Zenfone 2 Laser using XDA Labs
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
vdhero said:
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Click to expand...
Click to collapse
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Assabtigle said:
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Click to expand...
Click to collapse
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Be fast bro!!
vdhero said:
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Click to expand...
Click to collapse
BE fast BRO Love U and Your WORK!!
All Your DEVELOPMENT are Faster than The ORIGINAL one Please Buy a NEW one!
and Yeah install the Stock Rom in your Phone by ODIN it will be fine!:laugh: