Related
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Im really liking the wake and sleep feature on the Galaxy Note 8. This is a nice feature found on the iPad Mini and the Kindle Fire HD tablets.
http://youtu.be/3A8rtSead0I
http://www.youtube.com/watch?v=3A8rtSead0I&feature=youtube_gdata_player
Sent from my GT-N5110 using Tapatalk 2
Got the book cover case and really like the sleep and wake feature of it
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Juvenall said:
To anyone who picked one up, how does it feel in terms of bulk? Also, when the cover is folded over, does it lay flush with the spine or does the flap stick out?
Click to expand...
Click to collapse
It is very thin, as thin as my nexus 4, and feels like a father compared to my original xoom
the cover is just like the s3 flip cover but it snaps on the back instead of replacing the battery cover
and it triggers auto on and off like the ipad smart cover
Caved in and picked up the cover on the way home today. Some initial thoughts:
1) The case adds no real bulk to the device itself. The backplate and the screen flap are both super thin, so even when folded over, it's doable for someone like me who hates cases.
2) Because its all so thin, however, it does feel sorta cheap. If this suffers from the same build issues I've read the S3 version has, I don't have high hopes that it's going to last long.
3) The screen on/off thing is awesome. The sensor part of this is actually along the spine, not the edge of the flap. Not a complaint, just an observation.
4) When folded over, there is a bit of a "lip" around the spine. I can't say I love this, but it doesn't really impact the way I hold the device.
5) The "stand" feature is alright and seems stable enough as long as you use it in the single position it was designed for. I do with it had a few more angle options.
Verdict? Meh. It's not a bad case, and I don't intend to return mine, but had I been given the opportunity to play with one before, I don't think I would have spent the extra $50. At half that price, it wouldn't change my opinion, but I'd be far less disappointed.
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
rfb813 said:
I have the book cover for my 8.0 and it is not very heavy, acts like a stand and turns the Note on and off when I open and close it. Very convenient. Got mine on Amazon for $5.99. Thought I would give it a try for that amount . So far very happy with it.
Click to expand...
Click to collapse
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Juvenall said:
The only one I see on Amazon for that price is the IVSO version. What I hate about those cases is how you actually have to put the tablet inside and wraps around the front. The official book cover simply snaps onto the back of the Note 8.
Click to expand...
Click to collapse
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Ahh, right on. Same sort of issue for me with the case covering the bezel, but you should post up a quick review thread and a couple of pictures.
rfb813 said:
Here's what I bought:http://www.amazon.com/gp/product/B00B4BEAM8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I bought that same cover and also bought a similar one:
http://www.amazon.com/Dealgadgets-S...&qid=1366425979&sr=8-2&keywords=Galaxy+note+8
They both look essentially the same and add about the same bulk.
Major difference is that the Moko cover has auto wake, soft inside material, hand holder, and the pen holder doesn't interfere with IR. But it reeks! I mean it smells so bad I couldn't keep it in the same room with me. I left it outside overnight and it is still off gassing.
The Dealgadget cover has no weird smell. But also no wake function, no softer inside material, no hand holder. The pen holder is in a better location except if you plan to use the IR function. It is on the side of the tablet and I found it interferes with the IR.
So I ended up ordering the Samsung cover from this site. Since its coming from Hong Kong it will probably take a couple of weeks to get it. But I can't justify spending $50 for a cover. (Even though I probably will have spent close to $50 before I find one I like).
http://dx-box.com/catalogsearch/result/index/?cat=364&q=Galaxy+Note+8.0
I never purchased from this site before so I can't vouch for them yet.
I also have the upcoming Poetic case on order since its only $5. But it's not due to ship till May.
good one
hi budy go to your level best and may astonished to the forums:good:
When looking for some case reviews I stumbled over http://galaxynote8cases.com/ and they actually seem to have some good reviews. The only thing that is a real pain with the Note 8 is that it's tough to find any accessories for it.
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
tweak. said:
I just got the white book case cover, its perfect for people who are careful with their electronics but like that extra layer to prevent scratches. Adds virtually zero weight.
Click to expand...
Click to collapse
Thats the big selling point for me here. The absolute lack of bulk on this is awesome. I only wish this had two more features:
1) A magnetic hold when the front flap is covering the screen.
2) Another magnetic hold for the flap when its folded over the back.
Sent from my GT-N5110 using xda premium
There is a slight hold on the front side, as to not make it appear flimsy. When you flip it around back it "gives" a bit easier to fit snugly. Hard to explain, but clearly well designed.
Where are people buying this case, i cant find it anywhere.
The Book Cover Case is available in the US at local Best Buy, Staples and Office Depot. The only color is white, but the other colors will be available shortly.
Sent from my GT-N5110 using Tapatalk 2
theraker007 said:
Where are people buying this case, i cant find it anywhere.
Click to expand...
Click to collapse
got mine at best buy, it was the only one left in stock.
My Best Buy had black & white to choose from.
tweak. said:
My Best Buy had black & white to choose from.
Click to expand...
Click to collapse
wish i could have gotten black. i have friends that have the white cover on their sIII's and they get very dirty here in egypt, but i had to get something and white was the only choice.
I just ordered this ultra slim cover for my tf700 its slim and light, and not bulky it also has a stand for movie watching and for typing as well, i like how it covers the back and has all holes for the ports and speaker its a non branded cover that was shipped from hong kong took 2 weeks to get here, below i will post a link to the website I ordered and some pictures of the cover. price $15
http://www.ebay.com/itm/ASUS-Transf...es_Covers_Keyboard_Folios&hash=item35c43bb49b
looked really closely at that one, but went with the TPU Hard Gel instead. Post a review once you have used it a while and let us know what yoiu think of it.
Looks really good, thinking of a purchase. How's it lasted so far?
cover - check
slim - check
ultra - so so
smart - not even close
Ive had it for a couple days now and i like it, I like how now i don't have to worry about placing my tablet down on its back to avid scratches on the aluminum back, another thing i like is that it has a stand to watch netflix or anything else while im at the table, that was the only reason I used the keyboard dock now i wont have to attach and detach the keyboard dock all the time, another thing i like is that its slim and dose not make the tablet look bulky like some leather ones i see on ebay, I was also looking at the hard tpu case but chose this cover because of the stand.
Couple of questions:
How stable is it when it's set up in the movie-watching position?
How much protection/padding is does it offer (if any)? It looks very much like a clone of the Apple smart cover, so I'm guessing not a whole lot.
The anal retentive in me dislikes that fact that the Asus logo is upside down when it's in the typing position, but whatever!
I guess it's a toss up for me between this one (cheap, cheerful, slim, long shipping time) and this one:
http://www.amazon.com/gp/product/B008OHFT5W/ref=gno_cart_title_2?ie=UTF8&psc=1&smid=A1GC47N5J8F7IJ
(more expensive, not so slim (but better protection), two-day shipping).
TheCynick said:
Couple of questions:
How stable is it when it's set up in the movie-watching position?
How much protection/padding is does it offer (if any)? It looks very much like a clone of the Apple smart cover, so I'm guessing not a whole lot.
The anal retentive in me dislikes that fact that the Asus logo is upside down when it's in the typing position, but whatever!
I guess it's a toss up for me between this one (cheap, cheerful, slim, long shipping time) and this one:
http://www.amazon.com/gp/product/B008OHFT5W/ref=gno_cart_title_2?ie=UTF8&psc=1&smid=A1GC47N5J8F7IJ
(more expensive, not so slim (but better protection), two-day shipping).
Click to expand...
Click to collapse
its really stable i can type in the movie watching position without tipping over, that i did notice that when i type laying down the asus logo is up side down, but that's not a problem for me, i also looked at the case you have on the link, it looks nice its not that bulky and also works as a stand, only thing i didn't like was the mat sticks out in front of you when watching a movie, and that it dose not cover all around the edge just the corners, other then that seems like a good cover, and padding looks a lil thicker on both sides front and back. over all im happy with the slim cover it dose what i need, the long wait for it to arrive is what i hated,
Thanks for the feedback. I've gone ahead and ordered the Acase one, as I'll need something pronto and the tablet is due to arrive today. I may pick up one like yours later on...we'll see.
It looks pretty!
I'd be afraid to break wind near that with it standing, might blow over.
For anyone looking for a high quality stable folio case, I highly recommend the Targus Truss case! I bought mine at my local Best Buy for my Asus Prime for $40. It fits the Infinity perfect, as both tablets are nearly identical. The only thing is the volume rockers are trickier to get to, but it's not an issue at all, just throwing only way you can tell it isn't made specifically for the Infinity
Sent from my White Note 2 via XDA Premium HD
WebAngel said:
It looks pretty!
Click to expand...
Click to collapse
+1
I know people has been talking about these items quite a bit, so here is my 2 bits as I just picked it up and put them on yesterday.
The Spigen Glass IS compatible with the case itself, as you can see in the pictures. The glass works just fine with all touch screen sensation and eventhough some say the glass cut out does not match, mine seems to do just fine. It is quite pricy though, at 35 bux from amazon, compared to the case for only 18, but you do get a discount from amazon or spigen for that matter, 15% off Glass .tR. total for both came out to be 47.73 with free shipping.
Now with the case, works fine, snug-fit, I've had otterbox defender with the rubber being so lose like it's over stretched and doesnt cover up the plastic case well, not on this one as the rubber actually goes on the inside of the PC case. I haven't tried any drop test or any of that...not gonna do that =P But if you read on amazon and see the reviews for 1 stars, all with similar problem. 1- Case too slipper ( to finely finished seeing the PC case is on the outside insted of TPU). 2 - heart rate sensor does not work.
1. The case is indeed too slipper to my experience after one night playing with it, nearly dropped it 3 times in 30 mins, and I was so sure I had good grip. On the sides or back of the case, there is really no rubber to increase friction except for the button replacement cutout, so unless you got real thick and strong callus, you ain't holding it by the sides.
2. Heart rate sensor worked for me just fine, I am assuming that people tend to press on it very hard, so the pressure cuts off the blood flow therefore does not scan. If you look at the cut out for flashlight and the sensor, on the buttom of it, there is a mini slope compared to the top. Sort of like a 40 degree cut out on bottom and 90 degree on top if you get what I mean...so finger tip and actually rest on the sensor just fine, may take a couple try to get used to it, but that's definitely not the cons of the case..
The case color is gun-metal....to be honest, kind of regret it now since its not as vibrant or as sleek as I hoped it'd be, so black would probably be the best way to go since the back cover does not have any speical design to be standing out with ligher colour choices...
Thanks for the review.
I ordered a this exact same case about 3 weeks ago, and Im still waiting for it to arrive.
I also have a iLoome Screenmate 9h screen protector on my phone, which came quickly after ordering but I have to say, that:
#1 Fitment was terrible
#2 Customer service is atrocious. I asked to return it, and they said I could return it only if I hadnt removed the adhesive protectors
I have this same case as well and I love it. I have big hands so maybe that helps but I find the finish to be fine, not as slippery as most people make it seem. I do not have one complaint about the case and received it in only 3 days after ordering it, although I'm in WA so not far from where it was shipped. I also bought 2 of the basic slim plastic Spiegen cases and the regular screen protector that came with it with this case with no isssues. I was also glad that it did not add too much bulk to the phone overall. It is definitely thicker than the basic case I got but I'm sure it would withstand some abuse pretty well.
I actually have this case in black and I really like it. After seeing your pictures I may pick up the gunmetal finish one day as well. I haven't tried a drop test with it but I believe it should be pretty good possible comparable to the otterbox commuter as far as drop protection goes if not as close as you can get while keeping the case slim. I'm about done buying cases for a while because I have this one, a black Otterbox Defender, and my element Recon CF should be here Friday or Saturday.
For $35 you don't get much. I have the UAG and I think that is more attractive. But ultimately I want the Janis leather.
have a look to my "Cases Comparison: Spigen SGP Tough Armor -vs- UAG Protective Aero GLXS5" here :http://forum.xda-developers.com/showthread.php?t=2729413
I definitively use the UAG... waiting to test it with wireless charging.
Corwin9S said:
have a look to my "Cases Comparison: Spigen SGP Tough Armor -vs- UAG Protective Aero GLXS5" here :http://forum.xda-developers.com/showthread.php?t=2729413
I definitively use the UAG... waiting to test it with wireless charging.
Click to expand...
Click to collapse
I am also waiting for my S5 wireless charging back to be shipped to test that out. Still waiting for the inserts from china at the moment.
Anyway, today, I took the the glass protector to the test...well...................that's just say it is not that "amazing" as it is advertised. If you look at amazon spigen's picture description...you see that they held a xacto to the screen, and I copied.
Well, result is fair I'd say, you can barely tell by the naked eye that there is any scratch on the screen, but if you hold it at a certain angle or with the right lightning, you can see "marks" on the glass, but it is not rough to the touch of finger tip; however, if you lightly glide your nail across the "marks"..."clump" "clump" "clump"....i really don't know what sound to use, but you should get the idea, it is scratched...I did a lot of cutting and swirving the blade around the glass, but there is about maybe less than 10 marks...so my guess is that it is tough, just not to the blade, but daily usage should never scratch it.
At this point, I am thinking it's probably the "layer" on top of the glass actually came off? whatever...I will live, so will it. I also got 2 cheap china version for replacement if I really need to anyway...just haven't try to see if they acutally align.
nice & helpful. I got this same setup. A black Spigen tough armor case with a Spigen "0.23mm rounded natural fit (smooth edge & light) tempered glass protector". It's a near perfect fit on the glass, just a fraction to small imho. There is a small groove around the outer edge of the glass, inside the inner edge of the case. just enough to collect some dust. but really not that bad. I had a cheapo quality case and plastic screen cover from best buy the first couple of days. this setup is much much nicer. i think maybe I would go with a thinner option than .23mm if I had to do this again. other than that I would recommend this for sure. it is nice quality. and I love how easy it was to get the glass protector on there without getting air bubbles and so forth.
crownjoker said:
The case color is gun-metal....to be honest, kind of regret it now since its not as vibrant or as sleek as I hoped it'd be, so black would probably be the best way to go since the back cover does not have any speical design to be standing out with ligher colour choices...
Click to expand...
Click to collapse
Initially I bought the gun-metal option and almost dropped the phone a few times with that case. I then bought the black option and returned the gun-metal. The grip with the black option is much better with the soft feel coating..
mossolb said:
Initially I bought the gun-metal option and almost dropped the phone a few times with that case. I then bought the black option and returned the gun-metal. The grip with the black option is much better with the soft feel coating..
Click to expand...
Click to collapse
Hmm....nice...I didn't know that there was a difference in the material they used. I thought it was just different paint, but I live in canada anyway, so for me to return and get a new one is not worth the hassle. I'll stick to this for now, until I get the OEM wireless cover anyway.
So I have received the Itian wireless charging adapter and the wireless charging pad today. Time to do some feed back.
First to describe the picture attached.
1. Wireless receiver from Itian.
2. Wireless charging pad from itian.
3. Wireless charging pad from aliexpress.
4. Wireless charging pad from Nokia DT-900.
First, the adapter, is not thin by all means, I reckon the OEM cover will also be made thicker like the S4, while maintaining it's waterproof ability, bigger rubber ring I suppose. If you were to use these ones, it will get caught in between the rubber gasket; therefore, making your phone IP67 non-existing. It is also harder to close on that one side of the case, render that you can still close it, but over time I would assume the plastic to actually bent, and when you remove the charging adapter, the cover will probably not close properly to be IP67 ready.
Now, this post is not here to say whether the different brand of pad works or not, at a inital test, they all work on a S4 with OEM back with the DT-900 at best performance, but I am posting more related to whether they work with the Spigen Touch Armor or NOT. From now on, review is based on Itian adapter in phone and phone is Spigen TA case.
The Itian pad takes a significantly longer time to be recognized by the phone. Phone does not pick up the wireless signal for at least 5 seconds, while Ali takes about 3 seconds and Nokia tops it by about 1 second. If the same receiver works on all 3 pads, it seems to me that Itian simply does not have enough coil to produce strong enough waves, and hence charging speed will also be significantly slower than the others...? Throughout the charging process, due to the weak signal, itian has start and stop the charging process so many times that the pad eventually comes to a halt of error, LED light flashing blue and red simultaneously. ( I hope neither my phone nor the pad is damaged during this event...)
Ali seems to just having a hard time to align properly, seems the coil is strong, but small, so the phone could be disconnected simply by the slightest wrong angle. Meanwhile, Nokia has the smallest and thickest pad among all, but when you place the phone on top ( this is the only pad that is acutally smaller than the phone, for what I have anyway) it not only picks up right away, and you really have no problem in charging speed issue nor alignment issue.
Ali one may seems strong but the broadcast range seems to be small, while Itian is about in the middle of no where, for cheap pads anyway. Nokia seems to win out-right in this one, charges just fine with or without the case.
To sum it up, DT-900 cost me 25 bux, and the others both cost me about 10~15 depending on seller and shipping cost. All in all, I suggest throw in double of your budget from getting a cheap no name to affordable brand name will save you the trouble getting a new case or replacing damaged battery or adapter.
My question is. Is the oem wireless cover gonna be released any time sooner? I'm afraid that will make impossible to use this covers. My other question is anyone bought already a fake cover? What's the difference?
Sent from my SM-G900F using Tapatalk
marcochapita said:
My question is. Is the oem wireless cover gonna be released any time sooner? I'm afraid that will make impossible to use this covers. My other question is anyone bought already a fake cover? What's the difference?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
I could not find any related publication on when it will acutally be released, but you can pre-order them anywhere from samsung to amazon and other cellular websites. I heard someone once said that Atnt store already carries it? doubt it tho. I have preordered mine from amazon at the same price that samsung sells, but samsung offers free tectiles to come with theirs. Some other sites has boasted their selling price which is kind of stupid to my opinion.
EDIT, just found this online, not official, just annoucement from a retailer.
"This morning B&H Photo places put a date on the Galaxy S5 wireless charging back, with shipments expected to start on May 10th. Users can pre-order the Galaxy S5 wireless charging cover from this well-known retailer and could see the back arrive before the middle of the month."
Thank you for your response. I'm heading to a Samsung store tomorrow just to check if they have in there or if they say the same thing about the day. Because I already saw in the forum that some people have the back cover and it's a little bulky. And I can't use the phone without a protective cover. Hope that it's compatible with spigen line
I went to a Samsung official store on London and they don't have any wireless covers. But if I go to Amazon and search there's a store that has them on stock. So on Monday I'm going to buy one.
marcochapita said:
I went to a Samsung official store on London and they don't have any wireless covers. But if I go to Amazon and search there's a store that has them on stock. So on Monday I'm going to buy one.
Click to expand...
Click to collapse
On amazon.com. it says ship within 2 to 4 month, which is where I placed my order, but I don't think they have them in stock yet. I would assume Samsung stores to have them before anyone else to make the best profit for themselves. Some random purchasers have made comments among different websites about them picking one up already from the mobile stores, which I highly doubt...
I went to a Rogers store in canada, the guy there said he didn't even heard anything about it, he did NOT know such thing exists....so go figure.
crownjoker said:
I know people has been talking about these items quite a bit, so here is my 2 bits as I just picked it up and put them on yesterday.
The Spigen Glass IS compatible with the case itself, as you can see in the pictures. The glass works just fine with all touch screen sensation and eventhough some say the glass cut out does not match, mine seems to do just fine. It is quite pricy though, at 35 bux from amazon, compared to the case for only 18, but you do get a discount from amazon or spigen for that matter, 15% off Glass .tR. total for both came out to be 47.73 with free shipping.
Now with the case, works fine, snug-fit, I've had otterbox defender with the rubber being so lose like it's over stretched and doesnt cover up the plastic case well, not on this one as the rubber actually goes on the inside of the PC case. I haven't tried any drop test or any of that...not gonna do that =P But if you read on amazon and see the reviews for 1 stars, all with similar problem. 1- Case too slipper ( to finely finished seeing the PC case is on the outside insted of TPU). 2 - heart rate sensor does not work.
1. The case is indeed too slipper to my experience after one night playing with it, nearly dropped it 3 times in 30 mins, and I was so sure I had good grip. On the sides or back of the case, there is really no rubber to increase friction except for the button replacement cutout, so unless you got real thick and strong callus, you ain't holding it by the sides.
2. Heart rate sensor worked for me just fine, I am assuming that people tend to press on it very hard, so the pressure cuts off the blood flow therefore does not scan. If you look at the cut out for flashlight and the sensor, on the buttom of it, there is a mini slope compared to the top. Sort of like a 40 degree cut out on bottom and 90 degree on top if you get what I mean...so finger tip and actually rest on the sensor just fine, may take a couple try to get used to it, but that's definitely not the cons of the case..
The case color is gun-metal....to be honest, kind of regret it now since its not as vibrant or as sleek as I hoped it'd be, so black would probably be the best way to go since the back cover does not have any speical design to be standing out with ligher colour choices...
Click to expand...
Click to collapse
Judging from the size of the cutout on the charging port, it does not look as if larger, "fat headed" aftermarket chargers will fit.The reason I mention this is because I just ordered this (http://www.amazon.com/gp/product/B00GDESF1I/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A1H9NMCPZH97BO) 15 ft charging cable. Reviewers have mentioned that this cable does not work with their case on, and you have almost confirmed that for me. Thank you sir/ma'am!
jlandry287 said:
Judging from the size of the cutout on the charging port, it does not look as if larger, "fat headed" aftermarket chargers will fit.The reason I mention this is because I just ordered this (http://www.amazon.com/gp/product/B00GDESF1I/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A1H9NMCPZH97BO) 15 ft charging cable. Reviewers have mentioned that this cable does not work with their case on, and you have almost confirmed that for me. Thank you sir/ma'am!
Click to expand...
Click to collapse
Looking at the picture of your link, seems like you have purchased a standard USB 3.0 cord of which should be the same size on both end compared to standard USB plug for PC. I've attached a picture with my own USB 3 cord, WD brand for my external drive, it is round edged by a little fatter in the height wise, decimal mm difference. I have attached picture with dimention in CM along the post. It works perfectly with my case when I plug it in, so you might still be able to use it. The front rubber part of the case design is "loose" for the ease of use of the finger print scanner, so that is "movable" so to speak.
PS. Sir is fine =P
Now adays, people tend to use more wireless charging to save the hassel of plugging it and pulling out, it eventually wears out the charging port. On top of that, because of the waterproof cover, after you put on the case, it makes it even harder to open the cover if you have absolutely no nails like me. I keep the ruler by my table so I use the edge of the ruler to pry it open. Other than that, I rarely use the port anymore. Suggest in investing in a decent wireless charger and a charging back for rougly 50 dollars, or go with ebay for a 15 dollars all inclusive (less quality).
x3em said:
nice & helpful. I got this same setup. A black Spigen tough armor case with a Spigen "0.23mm rounded natural fit (smooth edge & light) tempered glass protector". It's a near perfect fit on the glass, just a fraction to small imho. There is a small groove around the outer edge of the glass, inside the inner edge of the case. just enough to collect some dust. but really not that bad. I had a cheapo quality case and plastic screen cover from best buy the first couple of days. this setup is much much nicer. i think maybe I would go with a thinner option than .23mm if I had to do this again. other than that I would recommend this for sure. it is nice quality. and I love how easy it was to get the glass protector on there without getting air bubbles and so forth.
Click to expand...
Click to collapse
I too brought the Spigen 0.23 mm glass protector, and with in one week it had completey cracked acorss the width of the screen. These screens are not and hard, scratch prrof, as they claim. I contacted the customer services regarding their screen did not live up to the claims, and useless is a kind word to describe their customer services.
Dont get me wrong its a good product but dont think it worth all that money when, its not going to last that long. Im considering buying a new one.. but not sure yet, so currently have the bog standard screen protector which came with my Spigen case.
porky pies said:
I too brought the Spigen 0.23 mm glass protector, and with in one week it had completey cracked acorss the width of the screen. These screens are not and hard, scratch prrof, as they claim. I contacted the customer services regarding their screen did not live up to the claims, and useless is a kind word to describe their customer services.
Dont get me wrong its a good product but dont think it worth all that money when, its not going to last that long. Im considering buying a new one.. but not sure yet, so currently have the bog standard screen protector which came with my Spigen case.
Click to expand...
Click to collapse
No, you are right. They are not as good as they claim to be, and in the free market, they are selling at a high price. Like I said, definitely not scratch proof as I have tested it, mine has not experience crack yet, but who knows. If you look online whether amazon or other spigen retails, lots of bad feedback of lining issue as well as customer service, especially customer service. They don't seem to replace or refund, nothing like that, as long as you have tried applying the glass, you are done. Even if it was manufacture defect, you still need to pay return shipping provided that you haven't remove the sticky 1 AND 2 side. Very minimal on defects, still has tho. I have ordered 2 cheap no-name brand from china on ebay as well as 2 cheap regular plastic film as back up. The phone will probably be gone before I really have to use up all 5 protectors.
I saw somewhere that there was a brand that provides life-time warranty replacement...I can't remember which one, someone here knows as it's on one of the threads. Do a search or someone can probably point it out for you. As far as where I stand, I got lots of cheap back up
Found this case on Aliexpress.com that promises no signal loss because slots are cut out where each antennae strips are on the phone. Looks amazing. Also says it has a liner on the inside to cushion the phone if dropped.
S6 Edge
http://www.aliexpress.com/item/For-...e-Case-For-Samsung-Galaxy-S6/32328021917.html
S6
http://www.aliexpress.com/item/S6-2...inum-Bumper-Case-For-Samsung/32328655797.html
I am ordering one but does anyone ordered have any reviews of this case?
Unfortunately that isn't how it works. Those plastic slots aren't really there for the antenna to radiate through. Either they are merely aesthetic, or they are there to break up the metal sides so that they are the right length to actually be part of the antenna themselves. So this case really is going to do nothing to stop any signal degradation.
Oh No, it's our friend Lucky Garden again pushing more China junk.
I do plan to order something like this one, as I was searching for it yesterday. Please give us review, when you get it.
Aww crap, I was hoping it would be a great case. Well I bought one but the good thing is it was only $2.99. When it gets here I will let you know what I think.
It came!!
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!
BlessedTalent said:
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!
Click to expand...
Click to collapse
I ordered one I think a day or two after you did. So it should be here soon. what about the GPS? Is the signal on that affected much?
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Oh, and as far as the slipperiness goes. I did this with my clear case and it worked pretty well. Most of the time that slipperiness is a combination of the slick plastic and the release agent they used. I started with 2000 grit sandpaper. Then I wet sanded it with 2000 grit. Then I 5000 grits sanded it. Then I used mothers plastic polish. Same thing you use on headlights. And it's much more comfortable to hold without getting that greasy slippery feeling and remaining crystal clear
Nice, I'll do that to help with the feel. My GPS seems to be unaffected as well. Seems like a win on this one to me.
One thing I will say is that the back cover is a pain to get off, doesn't slide off as easy as it goes on. Not a deal breaker but if you like to change your cases often this might be a problem for you.
looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't
[email protected] said:
looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't
Click to expand...
Click to collapse
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.
BlessedTalent said:
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.
Click to expand...
Click to collapse
please post if you find it for us.
[email protected] said:
please post if you find it for us.
Click to expand...
Click to collapse
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.
BlessedTalent said:
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.
Click to expand...
Click to collapse
If you want me to guineepig I will lol. I have no experience with this website is it better/more reliaable than ebay?
That's cool, yeah I don't want to put out $20 to find out it doesn't work as well as planned. I have purchased 5 cases over the past 6 years and have never had a problem. The money goes in escrow until you confirm you got your order in satisfactory condition and time. If not the money goes back to you. I pay with my credit card but others use Paypal. I hate Paypal so I don't use them. I thinks it's safe and will continue to order from Aliexpress. Others on this forum have also ordered, they may have some reviews on their experiences.
Ill buy it tonight. I am debating on black on black or back and silver
I just installed a after s reel protector on he back of my phone and the removal of the back of the case is super easy to remove now. I guess that moisture between the glass and the plastic was creating a suction keeping the back of the case stuck to the phone. Not a problem now though.
Really liking how this case feels and looks, most people don't even notice that a case is in my phone which is the whole point of me buying it.
I got this case via eBay and I am very pleased with it. Just what I wanted. I'll make a thread and take pictures later.