Database Info

[Q] How to pair with Bluetooth headset in phone mode?

I just got a Bluetooth headphone/headset (with mic) to use with my GT7+ (GT-P6210 wi-fi only) and my semi-smart phone. The headset (Motorola MOTOROKR S305) has three different pairing modes: music only, phone only, and both.
When I pair it with my little phone, it automatically pairs as both. It works fine as a phone headset (mic and earphones), and it works fine as a stereo headphone with the phone's music player.
When I pair it with my GT7+, it automatically pairs as music-only. There is no microphone function. With Bluetooth off, I can make calls using the GT7+ built-in mic and speaker and the GrooVe IP app. No problems. But with the Bluetooth headset paired, I just don't get the mic function. I can hear the phone audio in the earpieces, but the mic is dead.
Is there any workaround? Is there a way to get the GT7+ to identify itself as a phone-capable as well as music-capable device for the purpose of Bluetooth pairing? (That's what I think must be missing.)
TIA.

I can't speak for that particular headset but I successfully use a jabra (phone headset only) and GV with my tab plus. However, before I had a A100 tab and I had similar mic problems with the same jabra headset...so the whole compatibilty thing seems to be hit or miss.
I assume you checked settings to confirm there are no options to adjust mic? Also, you might see what happens if you pair and use GV right after boot.

jhorner said:
I can't speak for that particular headset but I successfully use a jabra (phone headset only) and GV with my tab plus. However, before I had a A100 tab and I had similar mic problems with the same jabra headset...so the whole compatibilty thing seems to be hit or miss.
I assume you checked settings to confirm there are no options to adjust mic? Also, you might see what happens if you pair and use GV right after boot.
Click to expand...
Click to collapse
I did check settings and I didn't find anything relevant. I also tried pairing while GrooVe IP was running and logged into GV. I'll try that again right after boot. Thanks.

[Q] Dock Audio w/ Mic Enabled

Hello all,
I have searched everywhere and can't find a resolution to my problem. I have the verizon GS3 in an Infuse 4G car dock and am running M2 of CM10.1. I also have a bluetooth headset (Motorola Roadster). Currently, I use Dock Sound Redirector to enable dock audio in the car dock (but keep speaker audio in my desk dock at home). I have the headset paired for phone call audio only, because I prefer my music on my car speakers and not the headset.
Because of this, I am not able to use the headset as a handsfree system at all. It will only enable the mic and route audio to the headset when I dial from the phone. If I attempt to use voice dialer it doesn't work. Another interesting item, when I was running stock and rooted I could use SoundHound to capture the music playing out of my cars speakers. I cannot do this with CM10.1. And even though I could do this on stock/rooted, I still couldn't perform voice actions in Google Now or Voice Dialer.
Sorry for such a long post, and this may not be possible, but in summary I would like to be able to use the bluetooth headset as a mic, at the same time as having dock audio to my car speakers. I would be ok with having phone call audio on the headset, as long as I could use voice commands or google now. Has anyone been able to find a solution to this or have a good setup?
-Timbo

timmyk465 said:
Hello all,
I have searched everywhere and can't find a resolution to my problem. I have the verizon GS3 in an Infuse 4G car dock and am running M2 of CM10.1. I also have a bluetooth headset (Motorola Roadster). Currently, I use Dock Sound Redirector to enable dock audio in the car dock (but keep speaker audio in my desk dock at home). I have the headset paired for phone call audio only, because I prefer my music on my car speakers and not the headset.
Because of this, I am not able to use the headset as a handsfree system at all. It will only enable the mic and route audio to the headset when I dial from the phone. If I attempt to use voice dialer it doesn't work. Another interesting item, when I was running stock and rooted I could use SoundHound to capture the music playing out of my cars speakers. I cannot do this with CM10.1. And even though I could do this on stock/rooted, I still couldn't perform voice actions in Google Now or Voice Dialer.
Sorry for such a long post, and this may not be possible, but in summary I would like to be able to use the bluetooth headset as a mic, at the same time as having dock audio to my car speakers. I would be ok with having phone call audio on the headset, as long as I could use voice commands or google now. Has anyone been able to find a solution to this or have a good setup?
-Timbo
Click to expand...
Click to collapse
BUMP!!! I'm having a similar issue. Same Dock. I am using Vanilla Rootbox Nightlies which uses CM 10's dock audio feature. I too have a muted microphone and I'm not even trying to use bluetooth. It seems like its trying to find a mic using the usb audio but obviously we just have speakers plugged in. Anybody have answers???

Having the same issue on CM 10.1 and 10.2, but in the AT&T variant of the S3. The bug has been reported, months ago, but isn't getting any traction. You can see the bug report at https://jira.cyanogenmod.org/browse/CYAN-1080. Follow the link and comment, and vote for the bug. Maybe we can generate some interest in fixing it.

[UPDATED] - This Works, but it is very buggy. Sometimes it will recognize the bluetooth mic a couple times in a row. Sometimes it will lock up at initializing, or just pop up blank.
So I have been playing with a couple of different apps, and CM 10.2 has finally resolved the USB audio issues with the gs3. Here is how I have been able to get USB audio to work and use a bluetooth headset for voice commands/google now.
What I used:
SoundAbout ... Try one of the beta versions first to make sure it works on your device (allows you temporary access to the pro features).
Galaxy Dock Sound Redirector
Bluetooth Launch (if you want to change the headset button to start a google now voice search)
InFuse 4g cardock
Motorola Roadster
Settings:
CM10.1 - Go to Settings>>Advanced>>USB-dock Audio and uncheck the box (The setting is missing in CM10.2)
- Also Settings>>Bluetooth select your device's settings, and uncheck media audio
Galaxy Dock Sound Redirector - Make sure it is turned on in the bottom left corner, and "Redirect audio through car dock" is checked. (I keep desk dock unchecked so I can hear my alarm in the morning)
SoundAbout - Under "Bluetooth behavior..." make sure "(Mono) microphone override" is checked
Bluetooth Launch - Scroll down and expand "Google Search". Then select "com.google.android.googlequicksearchbox.VoiceSearchActivity" (I have had some issues with the voice search locking up using this method)
Google Now - Go to Settings>>Voice and check "Bluetooth headset"
Now you should be able to play music, and hear navigation through your car speakers. When a phone call comes in, it will mute the music, and send the audio through your bluetooth. When you press the button on your headset it will launch google now and start listening through the bluetooth mic for your voice command/search. I'm going to put together a better write up, along with my dock and car setup sometime soon!

timmyk465 said:
So I have been playing with a couple of different apps, and CM 10.2 has finally resolved the USB audio issues with the gs3. Here is how I have been able to get USB audio to work and use a bluetooth headset for voice commands/google now.
What I used:
SoundAbout ... Try one of the beta versions first to make sure it works on your device (allows you temporary access to the pro features).
Galaxy Dock Sound Redirector
Bluetooth Launch (if you want to change the headset button to start a google now voice search)
InFuse 4g cardock
Motorola Roadster
Settings:
CM10.1 - Go to Settings>>Advanced>>USB-dock Audio and uncheck the box (The setting is missing in CM10.2)
- Also Settings>>Bluetooth select your device's settings, and uncheck media audio
Galaxy Dock Sound Redirector - Make sure it is turned on in the bottom left corner, and "Redirect audio through car dock" is checked. (I keep desk dock unchecked so I can hear my alarm in the morning)
SoundAbout - Under "Bluetooth behavior..." make sure "(Mono) microphone override" is checked
Bluetooth Launch - Scroll down and expand "Google Search". Then select "com.google.android.googlequicksearchbox.VoiceSearchActivity" (I have had some issues with the voice search locking up using this method)
Google Now - Go to Settings>>Voice and check "Bluetooth headset"
Now you should be able to play music, and hear navigation through your car speakers. When a phone call comes in, it will mute the music, and send the audio through your bluetooth. When you press the button on your headset it will launch google now and start listening through the bluetooth mic for your voice command/search. I'm going to put together a better write up, along with my dock and car setup sometime soon!
Click to expand...
Click to collapse
Just made my way back to this thread, I haven't gotten a chance to try it but I will when I get a chance and report back.

Another Update
I have just noticed that my SoundAbout trial period has ended, but everything is still working the same as before (still just as buggy). This may not be needed, or maybe it just needs to be set once?

Google maps voice prompts

Hey all. Whenever I'm in my car my phone is connected to bluetooth so I can receive calls. However, Google Maps voice prompts default to bluetooth. The problem is that if I'm listening to FM then the voice does not come through the speakers (this is an issue with the system in my car). In those cases I want to have the voice prompts come through the phone speaker, but I can't find how to change it from bluetooth. It seems that if my phone is connected to bluetooth then I cannot play prompts through phone speaker. Anyone know how to change this?

marleyfan61 said:
Hey all. Whenever I'm in my car my phone is connected to bluetooth so I can receive calls. However, Google Maps voice prompts default to bluetooth. The problem is that if I'm listening to FM then the voice does not come through the speakers (this is an issue with the system in my car). In those cases I want to have the voice prompts come through the phone speaker, but I can't find how to change it from bluetooth. It seems that if my phone is connected to bluetooth then I cannot play prompts through phone speaker. Anyone know how to change this?
Click to expand...
Click to collapse
I think if you go into the bluetooth setting and press the settings button for your car conenction and uncheck media audio it should stop the maps voice prompts being sent to the car. It will also stop you sending music to the car as well though.

mattyboyo said:
I think if you go into the bluetooth setting and press the settings button for your car conenction and uncheck media audio it should stop the maps voice prompts being sent to the car. It will also stop you sending music to the car as well though.
Click to expand...
Click to collapse
Yeah that works thanks. It's not a very good solution tho. I should be able to have my voice instructions go to my phone speakers regardless of whether I'm streaming music or not. And I shouldn't have to change a setting on my UVO to stop it from going to bluetooth. Thanks tho.

[Q] A bluetooth work-around needed?

Hello everyone,
I have a specific problem with a bluetooth device and with my limited knowledge I haven't worked out how to fix it, so I am asking for your help. I will explain it best I can...
I have a third-party bluetooth stereo in my car that has a built in mic for voice calls. However, the microphone is of terrible quality and as it's in the stereo unit it's quite far from me when I'm driving meaning it is almost useless to use for voice calls. Because of this I purchased a seperate good quality bluetooth speaker/mic that fits on to the car's sun visor. The problem I have is when I get in to my car my phone connects to the stereo only and not the small speaker. I want my phone to connect to the stereo via b/t so I can play my music through it, which is great, but not for voice calls. I see in the b/t options on my phone (HTC One) that you can check/uncheck boxes for the type of connections, in this case 'Phone Audio' and 'Media Audio'. If I just have the Media Audio setting checked, the phone fails to connect to the stereo at all, not even for music, so in order for it to automatically connect to the stereo I need the Phone Audio option enabled too, causing it to then not connect to the seperate device, thus diverting all calls through the stereo, which is really inconvenient. There are no options within the stereo that isolates these individual settings.
Are there any apps or methods you can advise me on that will allow my phone to connect to the stereo automatically but with voice disabled? I have looked in to Tasker but I am not skilled enough to work out how to set it up, so if this is the best option can somebody talk me through this please?
I appreciate the help on this, and I hope I've explained it adequately.
Simon

Assistant over voice channel when in bluetooth

Hi, I just bought e nord 2 (but the question is applicable to any phone I think). I had a P20, and when connected to my car, (nissan qashqai J11) I was able to use steering wheel command to call up android assistant on phone, and it answer either if the infotainment device wasn't in aux/bluetooth mode. Now with the oneplus, it only works when in bluetooth input, or better, I can hear assistant voice only in that mode and putting the volume very high.
I think the difference between the two devices is that P20 send assistant output to the car as it was an incoming call, while op send it as a music stream or something so.
Here the question: is there some settings or some app that let me to send the assistant audio as a voice call over bluetooth?
Thanks!