Hi guys,
here is a new FTP server which runs on your rooted phone and enables you to remotely access all of your files on your phone for read/write (even /data, /system and / itself). If you like it, you can find it on Google Play.
Current version is: 1.20
Developer's page is here: http://waterdev.com/apps/rftp
Tutorial: http://www.goodandevo.net/2011/05/h...-evo-root-file-system-from-your-computer.html
Video tutorial: http://www.youtube.com/watch?v=kd1p0SAx9J8
----------
More info:
----------
Root FTP Server is an utility (ftp server) for Android to remotely access the file system with root privilegies over FTP protocol. You can access everything, even your /data /system or even / folder with read-write permissions. There are no restrictions. For that to work, you need a rooted phone. It really wont work without it. You also need to connect your mobile to the network (probably by wifi).
Instructions:
* Connect to your wifi network. Your computer must be able to reach your phone.
* Install the application.
* Press the start button, be patient, the installation will take a while. Once it is done, you will be asked for your user name. (If you have Superuser app, please see below.)
* Press the start button again, the server will start.
* Use any ftp client you like to access your files.
Issues:
* If you have the Superuser application installed, you MUST check "remember" and then click "enable".
* If your phone is not rooted, the server will NOT install.
* There is no password! Your username acts as a password as noone should know it. If you are prompted for a password, just hit enter (no password).
Connecting:
Use any ftp client. Totalcommander, windows explorer or whatever you like. The server runs at port 21. For passive connections, it uses ports 29000-30000. It is fully enabled ftp server with many features on. Url to connect will look like: ftp://[email protected]:21, or just ftp://192.16.1.1 and you will be prompted for you username and password. The username is what you entered in the application, password is empty (no password). If you are using windows explorer, please enter url in this format: ftp://[email protected] to your URL bar (e.g. ftp://[email protected]).
The server actually installes into your device to be available even without your sd-card. It will take about 1MB of space.
If you find any bugs contact me at [email protected]!
Well, what's the difference between yours one and SwiFTP, or even Samba? I'd prefer last one for it's stability, performance and functionality. (nothing personal, man)
Well, one big difference is that in Swiftp (not quite sure about samba) you cannot browse through data folder, you cannot download files there, you cannot write to the system directory etc. With Root FTP, you can. It does not have any of these limitations, it allows you to do anything on the filesystem.
I haveto try this
zeppelinrox said:
I haveto try this
Click to expand...
Click to collapse
Thank you, I appreciate any comments.
I updated the application and it now supports USB mode. That means that you can comfortably connect your phone to PC via USB and access the filesystem with root privileges from any file manager you like. For further instructions, visit the homepage.
A great new tutorial came out at www.goodandevo.net! Thanks to Gary.
Bought the full version, coiuldnt get it to work on my 3.1 xoom. Is this a known issue?
ftgg99 said:
Bought the full version, coiuldnt get it to work on my 3.1 xoom. Is this a known issue?
Click to expand...
Click to collapse
Hi, no, I have not tested it on devices 3.0+. However, if you could send an email at [email protected] (or just PM me) with a description of your problem, it would be very helpful. In case we cannot solve it, I will happily send you a refund.
video tutorial
A video tutorial here: http://www.youtube.com/watch?v=kd1p0SAx9J8
Bought this server and it works well but it is preventing my phone's screen from sleeping. No idea why that would be, very strange.
The app was updated. It now runs fine on Jelly Bean, has slightly improved design and some bugs were fixed.
Doesn't there need to be a free XDA version to advertise it here? Or did I miss it somewhere?
jacklebott said:
Doesn't there need to be a free XDA version to advertise it here? Or did I miss it somewhere?
Click to expand...
Click to collapse
Sorry, don't understand. What do you mean?
[ANNOUNCEMENT] To Devs, please read
"And remember, no links to payware and no limited beta's."
"You may use XDA for customer feedback of commercial software but no links to app."
Ok, I got it. I removed the link to the market. I guess it was here before such rules were imposed.
Galaxy note3 kitkat 4.4.2
Root FTP server does not work on Galaxy note3 (N9005) running KitKat 4.4.2.
Is there any log file to prove what is the problem pls. ?
Hello,
I have S4 mini ANDROID 4.4.2. IF you know :
1/ An app for see all apps systems what is for what (i know a lot of apps what is for what because it's easy but it's not suffisant for good information like:
stockage media 4.4.2 I9195xxxxx (PLAYLISTS) (in titanium backup it's GREEN) but if i delete this or disable it's not good because my apps for watching picture gallery don't see pictures)^^ and a lot of bloatware list for system apps it's not very very good information for WHAT IS FOR WHAT.
IF YOU KNOW AN app for know what is for what with good information i think it's very very kind for me (thanks you so so much)
2/ An app for see details (modules of 1 apps) for see all elements of an apps (for see if an module consume a lot of battery or if an module of an app are always active on hide)
This help is for me and all USERs of Android. Thanks you so much if you participate.
raphael78 said:
Hello,
I have S4 mini ANDROID 4.4.2. IF you know :
1/ An app for see all apps systems what is for what (i know a lot of apps what is for what because it's easy but it's not suffisant for good information like:
stockage media 4.4.2 I9195xxxxx (PLAYLISTS) (in titanium backup it's GREEN) but if i delete this or disable it's not good because my apps for watching picture gallery don't see pictures)^^ and a lot of bloatware list for system apps it's not very very good information for WHAT IS FOR WHAT.
IF YOU KNOW AN app for know what is for what with good information i think it's very very kind for me (thanks you so so much)
2/ An app for see details (modules of 1 apps) for see all elements of an apps (for see if an module consume a lot of battery or if an module of an app are always active on hide)
This help is for me and all USERs of Android. Thanks you so much if you participate.
Click to expand...
Click to collapse
Pls be clear with what you want
If you're not good with English, type in your own language and translate with Google Translate and post here.
Give an example so that we can understand
Simply, i need to know if an app for see details for alls systems android apks exists or not. For example:
Apps name (example) System Details (you install him) and he list like that:
Acceuil touchWiz 4.4.2i9195 xxxx = Apps for Menu and other necessary but you can remplace it by other (recommanded not delete this)
Adapt sound 1.0= Apps system , he can up the sound max ( a little bit) i you delete him no problem but (recommanded to disable or freez)
Agent comment market = ... i don't know (but need all information what is for what and if i delete this problem or not)
Aide/Help 1.0= it's help information for help you to know how use your phone (recommanded (i don't know) maybe delete him no problem but .. maybe not
Because in TITANIUM BACK UP for example YOU CAN SEE:
Stockage Media 4.4.2 i9195 xxx (PLAYLISTS) IN GREEN (but we know green= no problem to delete him) but i learn by test... if you delete him, your GALLERY apps = not show image/picture) TITANIUM BACKUP are in error (not green but red normaly)..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
LAN drive is an easy SAMBA Server for Android (iOS & WM10) devices.
Access all your phone files - InternalStorage,SDCard,ExternalHDD - in read/write remotely with common softwares :
MAC OS Finder
Windows File Explorer
ES Explorer
VLC
Kodi
Any SMB client capable app
You just have to be on the same network (WiFi) to make it work.
There are 3 default network sharings activated :
'LANdrive' : storage bound with the app (deleted when you clear cache of the app)
'Root' : "/" access
'InternalStorage' :
'SDCard'|'HDD': Any other external storage automatically detected
You can create your custom sharings too (bound to the app or select one with file picker)
The app is free with an InApp purchase for unlocking the bandwidth (0.5 MB/s in trial) and remove ads, otherwise all is functionnal.
We released it first at the end of January 2018 and are looking for feedback and help in making LAN drive the best it can be.
Presentation Video:
Works without ROOT:
Read the tutorial inside the app (works on Windows / MAC / Linux)
Features:
Copy/paste/rename files and folders on your device with MAC OS Finder, Windows File Explorer, Android ES Explorer, etc.
Access the 'external' storage (Photos and Videos included) in your device as a network shared folder.
Access the Root folder and all directories including SD Cards or external HDDs as network shared folders
View your multimedia files with embedded mediaplayer (or external app).
Your device name appears automatically in MAC OS Finder, Windows File Explorer, Android ES Explorer, VLC, Kodi etc.
Manage your device name (NetBios) and Workgroup name.
3 authentication types : Anonymous with popup confirmation, Anonymous and Users with custom rights
Manage users and create your own shared folders with credentials.
View users connected and disconnect them.
Unlimited connections (several users can access your sharings at the same time)
5 languages : English, Spanish, French, German, Italian.
Launched as a service in the background : Access your SMB server while using other apps
Optionally start the app after boot device completed
Protocols SMB1 (CIFS) and SMB2 protocol (enable/disable via settings)
How Does It Work?
LAN drive uses its own SMB1 & SMB2 implementation with an efficient way to announce itself on clients (your phone appears automatically in other software, even in Windows 10 File Explorer).
You can choose 3 ways to authenticate :
Popup confirmation (default)
Anonymous
Create users with custom rights
Even if it requires root access, LAN drive is non intrusive (not installed in app systems), nothing will stay in the system after uninstall it.
Known issues
App startup time could be very slow (could take 10 seconds depending the devices).
It's not something we can improve at the moment (framework loading Xamarin.Forms)
App Size : 26MB. We can't make it better, again Xamarin.Forms have some mandatory DLL to load to work
Use cases:
Some users don't know the powerfull use of SMB server, here some use cases:
Backup files, like you do with an USB key, but without the USB cable, and with security credentials.
Watch your movies/photos on your TV with Kodi (or VLC) streaming directly from your Phone.
Use a Backup utility from MAC or PC to create a scheduled task which backup|synchronize your movies/photos every days.
Developers|Hackers could browse Root "/" and edit/delete/copy/paste any files without using adb shell
Who Are We?
Webrox is a little french company of 2 persons, we build apps since 2011, check the Webrox store page here.
We made LAN drive to have a very easy multiplatform SMB Server.
How To Download:
Google Play Download
XDA:DevDB Information
LAN drive, App for all devices (see above for details)
Contributors
poppyto
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2018-05-14
Created 2018-05-15
Last Updated 2018-11-19
Glad to see you here! :good::good:
@poppyto
Thank you for opening a own thread.
You could transfer the old postings from Samba File Server to this new thread.
You're welcome
Here are the previous messages from the original thread
svbarbosa said:
I hope no one will be upset with my post, specially the OP.
But since there is no update for Samba Filesharing since 2014, I feel obligated to share my discovery.
Yesterday I found an alternative app in play store: LAN drive - SAMBA Server.
In preliminary tests it works well and seems faster than Samba Filesharing. But be aware that the free version has a speed limit. To use LAN drive at full speed you have to pay.
The app has been released on January 25, 2018. There are constant updates and the dev seems active and responsive.
I made this discovery because there was no way Samba Filesharing would work in my Moto Z2 Play. Due to the nightmare of using MTP I started searching for alternatives. I found LAN drive and it worked like a charm.
When creating your accounts and shares, my advice is first create all your shares and then add users. If you follow the app suggested sequence you will end up with your custom shares not accessible from your PC.
If you use file synchronization software be aware that LAN drive has a bug. Files written to the phone do not get the time stamp updated to the source file time stamp. I will report this to the dev and hope it gets fixed soon.
Click to expand...
Click to collapse
poppyto said:
Hello svbarbosa, I'm the LAN drive developer.
I will fix the issues of users rights and wrong timestamp on monday.
I would like to tell other users LAN drive is a non intrusive app (it doesn't install anything in the system apps and it only work when you started it, security is a big thing these days).
If anybody have a feedback, feel free to test LAN drive and feedback me
Click to expand...
Click to collapse
svbarbosa said:
@poppyto, welcome to XDA!
Glad to confirm you are really active and responsive.
I have also seen your answer to my email and will get on it soon. Some family errands to run first.
Take your time to fix the issues. We have been waiting for so long to have samba support that we can sure handle waiting some more time to have your fixes.
And please do start the LAN Drive app thread. I am a long time user of Samba Filesharing and despite it seems to be dead in terms of new development, somehow I feel weird talking about a replacement app here.
I had problems with Samba Filesharing not working in my Moto Z2 Play, it is my first phone where Samba Filesharing would not work. Shares do not appear on my PC.
I did some research and foung a great replacement app. Check it out in my previous post #235.
Click to expand...
Click to collapse
Dr.Ghobar said:
Can you make LAN drive compatible with android 2.3 too?
Or
Can you give me another version of it which is compatible with android 2.3?
Click to expand...
Click to collapse
poppyto said:
Unfortunately, Xamarin Forms needs at least Android 4.0.3, and I can't make it better :/
Click to expand...
Click to collapse
tramp20 said:
I was happy to found your app, but nothing works (I have paid in the meantime):
1. I cannot make a new user
2. I cannot change sharings etc.
3. I cannot change device name and so on.
your app does not accept any input
Until now I am using Samba FileServer or SambaDroid
You could make a own XDA thread here if your app really works.
Sony Z1c stock rom 5.1.1 rooted
Click to expand...
Click to collapse
svbarbosa said:
Hello tramp20,
I will open a support thread for LAN drive. I am not the developer, just a user of the app willing to help.
LAN drive is working fine in three of my phones.
In the meantime please let us know your phone model, Android version / rom, kernel if not stock and from which device/PC you are trying to access the phone.
Click to expand...
Click to collapse
tramp20 said:
1.
I wrote this two times: Sony Z1c stock rom 5.1.1 rooted
As I cannot change the settings I cannot get a connection to my Win10 PC.
As I wrote too I have no problems with Samba File Server or SambaDroid.
2. On a very old LG P970 (Android 4.x) I can change the settings of this app but I don't see this phone in my network because Lan Server catches a wrong IP address (perhaps mobile and not WLAN).
This app is in my eyes only alpha quality until now.
Click to expand...
Click to collapse
svbarbosa said:
My bad. I am having a tough work period and missed the last line in your post.
For now, in your Sony, please uninstall and reinstall from Play Store. This will wipe data for LAN Drive make sure you have the latest update.
Then create one user and one share. It should work.
Turn of mobile data in settings and check if you can see it from your PC.
Click to expand...
Click to collapse
tramp20 said:
Hi,
since Lan Drive v1.3 I can configure this app now
But there are problems of course:
1. During deep sleep of my device I have wakelocks the whole time (battery is discharging badly), See attached screenshot.
2. If I de-install the app and make a fresh new installation all shares are visible and I have access (not always). But after a short time or after stopping and restarting this app my device is no longer visible. I tested this on two smartphones several times. That is terrible.
Wishes.
A possibility to save and restore the settings on the (external) sdcard.
2. If I tap on the back key the should NOT stop the smb server.
If the smb server is running the transfer rate is very good compared to the old samba file server
Click to expand...
Click to collapse
svbarbosa said:
Well done. You beat me! Could not find the time to start the thread as I offered.
Truth is I'm having an unusually tough period at work.
Fortunately it is almost over and I will be able to help LAN drive development again real soon.
Click to expand...
Click to collapse
@poppyto,
please remember my postings:
1. During deep sleep of my devices I have wakelocks the whole time (battery is discharging badly). See screenshot.
2. A possibility to save and restore the settings on the (external) sdcard.
3. If I tap on the back key this should NOT stop the smb server.
Thank you for your work.
tramp20 said:
@poppyto,
please remember my postings:
1. During deep sleep of my devices I have wakelocks the whole time (battery is discharging badly). See screenshot.
2. A possibility to save and restore the settings on the (external) sdcard.
3. If I tap on the back key this should NOT stop the smb server.
Thank you for your work.
Click to expand...
Click to collapse
1. It looks "normal" in Service mode because the app continues to advertise so it uses battery.
If you don't need the run as Service feature, you could deactive it in the settings (but the app will not work in background after that, only in foreground)
2. Ok cool, I will add it
3. Yep specially in service mode ok, I'll fix it
poppyto said:
1. It looks "normal" in Service mode because the app continues to advertise so it uses battery.
Click to expand...
Click to collapse
No, that is not normal: during 14h 59m your app has during 98.6% of this time wakelocks. The battery drops normally during night from 100 to 95% but with your running discharges to ~70%.
As you can see other apps in my screenshot they have all >0.2 %.
Your app should detect this unused time during night (deep sleep) and when WLAN is off, there is no need to permanent check.
BetterBatteryStats is a perfect app to detect things.
And thank you to solve the other two points.
You will have a lot of work for this app (fine tuning)
tramp20 said:
No, that is not normal: during 14h 59m your app has during 98.6% of this time wakelocks. The battery drops normally during night from 100 to 95% but with your running discharges to ~70%.
As you can see other apps in my screenshot they have all >0.2 %.
Your app should detect this unused time during night (deep sleep) and when WLAN is off, there is no need to permanent check.
BetterBatteryStats is a perfect app to detect things.
And thank you to solve the other two points.
You will have a lot of work for this app (fine tuning)
Click to expand...
Click to collapse
Ok, I just sent an update,
So, based on your comment about the battery drain:
I add an auto stop after inactivity time (no connection on the server) you can change it in the settings (default:30min), I hope it will resolve your battery issue let me know !
Here the new changelog for 1.5 (will be available in 15 minutes I guess) :
New feature : Auto Stop server after inactivity time (change the duration in the settings, default : 30mn)
New feature : Backup and restore your settings on an external file
New behavior : Doesn't stop the server when button back on the homepage
poppyto said:
New feature : Auto Stop server after inactivity time (change the duration in the settings, default : 30mn)
New feature : Backup and restore your settings on an external file
New behavior : Doesn't stop the server when button back on the homepage
Click to expand...
Click to collapse
Thank you, your app will become better with each update.
To 1. the server stops with no wakelocks now: good
But the server stops always, it should only stop if WLAN is off.
To 2. Backup is fine but if I select a external path (e.g. SDCard1) the app should remember this selected path if I want to restore, so I do not
have to search.
To 3. ok
Thank you.
There could be a bug with access rights to root directory.
With the build-in root share or with a own declared share I can
1. map this share in Windows but cannot access directories or
2. mapping fails with access error 5 in windows.
Mapping and access of sdcard0 and sdcard1 is always ok.
I have this behavior on two smartphones (Sony Z1c Android 5.1.1 stock rom, rooted of course)
With Samba File Server and SambaDroid no problem.
tramp20 said:
Thank you, your app will become better with each update.
To 1. the server stops with no wakelocks now: good
But the server stops always, it should only stop if WLAN is off.
To 2. Backup is fine but if I select a external path (e.g. SDCard1) the app should remember this selected path if I want to restore, so I do not
have to search.
To 3. ok
Thank you.
Click to expand...
Click to collapse
1. Ok I will add an option for that too
2. Mmmm why not ok
tramp20 said:
There could be a bug with access rights to root directory.
With the build-in root share or with a own declared share I can
1. map this share in Windows but cannot access directories or
2. mapping fails with access error 5 in windows.
Mapping and access of sdcard0 and sdcard1 is always ok.
I have this behavior on two smartphones (Sony Z1c Android 5.1.1 stock rom, rooted of course)
With Samba File Server and SambaDroid no problem.
Click to expand...
Click to collapse
So only "Root" / shows access denied in Windows ?
Maybe there's something wrong with Android < 6.0 (I use 6.0 and more)
Could I contact you directly to solve the case ? (I will need some actions to do)
Stephane
poppyto said:
So only "Root" / shows access denied in Windows ?
Maybe there's something wrong with Android < 6.0 (I use 6.0 and more)
Could I contact you directly to solve the case ? (I will need some actions to do)
Click to expand...
Click to collapse
There are sometimes difficulties to access the other shares too on my two identical Z1c.
Today I found 6 active connections to my PC even if none are really mapped (PC was new started, see screenshot).
To the wakelocks: stopping the server is NO solution as the samba server is not started again when WLAN comes back.
Perhaps you can find here on XDA how to handle wacklocks correct.
As you can see in the second screenshot LD permanently sends wakelocks (98.6% of the running time of the server), compare this with the other running apps. I cannot help I am no programmer.
Your app seems to have one permanent wakelock (count:0 time 98,6%), all other apps have some counts and a very little used time. So your app prevents Android to go to deep sleep.
Of course you can connect me direct with perhaps a PM (XDA-profile).
Good luck.
tramp20 said:
There are sometimes difficulties to access the other shares too on my two identical Z1c.
Today I found 6 active connections to my PC even if none are really mapped (PC was new started, see screenshot).
Click to expand...
Click to collapse
You may mapped "Z:" drives ? Or a backup utility ? I need more information to investigate if there's a bug.
tramp20 said:
To the wakelocks: stopping the server is NO solution as the samba server is not started again when WLAN comes back.
Perhaps you can find here on XDA how to handle wacklocks correct.
As you can see in the second screenshot LD permanently sends wakelocks (98.6% of the running time of the server), compare this with the other running apps. I cannot help I am no programmer.
Your app seems to have one permanent wakelock (count:0 time 98,6%), all other apps have some counts and a very little used time. So your app prevents Android to go to deep sleep.
Click to expand...
Click to collapse
Other apps don't wavelock because they don't need it.
Without wavelock, LAN drive can't work (TCP connections are dropped) when the screen goes off and people want to use it when the scren goes off, the first option to stop the server when there's no more connections since a duration is a good option.
The good way should be to capture the "Deep Sleep" event, but it's impossible with the WaveLock on.
I will think about it this week if I can find a better solution
poppyto said:
You may mapped "Z:" drives ? Or a backup utility ? I need more information to investigate if there's a bug.
Click to expand...
Click to collapse
I mapped 3 shares with
net use u: \\Sony-Z2c\sdcard0
net use v: \\Sony-Z2c\sdcard1
net use x: \\Sony-Z2c\root
As the last share does not allow access to me (only with your app) I tried several times to read a directory.
On your app main screen i saw some messages that LD has connected to my PC and displayed every time a new connection. After 6 I stopped the server.
poppyto said:
Other apps don't wavelock because they don't need it.
I will think about it this week if I can find a better solution
Click to expand...
Click to collapse
You could try this with the Samba File Server app how wakelocks should look.
And with BetterBatteryStats (https://play.google.com/store/apps/details?id=com.asksven.betterbatterystats) you see the result after some time in summary-partial wakelocks.
I tried this again with samba file server, waited ~20 mins in deep sleep and no single wakelock from this server was seen.
I don't know how this works but in my opinion Android shuts down WLAN when the screen goes off and no charging (that is my setting in Android) and then the samba server has nothing to do and it should stop his own wakelocks to save battery until WLAN starts again.
Sorry I am not a programmer.
tramp20 said:
You could try this with the Samba File Server app how wakelocks should look.
And with BetterBatteryStats (https://play.google.com/store/apps/details?id=com.asksven.betterbatterystats) you see the result after some time in summary-partial wakelocks.
I tried this again with samba file server, waited ~20 mins in deep sleep and no single wakelock from this server was seen.
I don't know how this works but in my opinion Android shuts down WLAN when the screen goes off and no charging (that is my setting in Android) and then the samba server has nothing to do and it should stop his own wakelocks to save battery until WLAN starts again.
Sorry I am not a programmer.
Click to expand...
Click to collapse
So to resume the behaviour you would like :
If server smb is started :
if WLAN off : stop wavelock
if WLAN on : start wavelock
Does it sound ok for you ?
tramp20 said:
I mapped 3 shares with
net use u: \\Sony-Z2c\sdcard0
net use v: \\Sony-Z2c\sdcard1
net use x: \\Sony-Z2c\root
As the last share does not allow access to me (only with your app) I tried several times to read a directory.
On your app main screen i saw some messages that LD has connected to my PC and displayed every time a new connection. After 6 I stopped the server.
Click to expand...
Click to collapse
Ok there's a bug with Root directories, could you track what's happen with the debug interface and send me the result :
From a computer, while LAN drive is launched go here :
http://[B]your_phone_ip[/B]:13000/debug.html?refresh=auto&refreshtime=1&orderby=desc
Then try to access Root sharefolder, the debug page should show/may something
Then save the page CTRL+S from your browser dans send it to me enclosed here
Thank you
poppyto said:
If server smb is started :
if WLAN off : stop wavelock
if WLAN on : start wavelock
Does it sound ok for you ?
Click to expand...
Click to collapse
For the beginning that sounds good
poppyto said:
Ok there's a bug with Root directories, could you track what's happen with the debug interface and send me the result
Click to expand...
Click to collapse
output from your debug interface is attached.
My file manager never ends in connecting/reading the root share. And your app has created now >7 connections to my PC.
I hope you can see something in the debug file.
This afternoon I have only ~2 hours time and tomorrow morning I am not at home.
tramp20 said:
output from your debug interface is attached.
My file manager never ends in connecting/reading the root share. And your app has created now >7 connections to my PC.
I hope you can see something in the debug file.
This afternoon I have only ~2 hours time and tomorrow morning I am not at home.
Click to expand...
Click to collapse
Thank you, I opened the debug but unfortunately it shows no issue, I'm back at work tuesday, I keep you in touch don't worry
Hi Everyone
I'm assume my phone been hacked or cloned I'm not sure what's the right word for it but I need help to find out If I'm right or I'm just being paranoid.
Galaxy S10e SM-GF970F
Phone status Official
One UI version 3.0
Android version 11
I find in my battery usage my secure folder using 381 MB of data what I hardly use, , 324 MB Foreground, 57 MB background.
In the secure folder checking wi-fi data usage , on the bottom has "something" named 15010286 what used 5,41 kb data in the past week..
Some of my setting are changing, like I had swithed off the option to show up the letter or number when I typing passwords etc.
When I checking battery usage in settings, I scrolling down and after couple seconds its jump up the top again.
My question would be: any program what would find the program what the intruder used?
How can be sure if Im hacked or how can I clean my phone??
Thanks
Sounds less like a hacker and more like just a buggy phone xD. This behaviour is in fact strange but I would doubt that this is a hacker. Maybe you've downloaded some cracked apks from the internet and accidentally downloaded malware.
Maybe this isn't the best way but try this:
Go to device care, device security (or something similar) and scan your phone. If there is an obvious malware the scan will detect it. if not, I cannot help you.
Personally I store everything on my sd card so I would just do a factory reset. Idk about you.
Thanks for the reply.
I have SOPHOS "antieverything" on my phone, the only app what didn't come from google play was the latest Vanced.
Device care/device security shows no malware.
I have 100 GB data on my phone, my SD card encrypted, same as my phone. Any advice what is the easiest way to save all those pictures and videos before I factory reset my phone? Preferably direct to an USB as most likely my PC and home network hacked too.
Thanks
GusTheHun said:
Thanks for the reply.
I have SOPHOS "antieverything" on my phone, the only app what didn't come from google play was the latest Vanced.
Device care/device security shows no malware.
I have 100 GB data on my phone, my SD card encrypted, same as my phone. Any advice what is the easiest way to save all those pictures and videos before I factory reset my phone? Preferably direct to an USB as most likely my PC and home network hacked too.
Thanks
Click to expand...
Click to collapse
just connect your device to PC and do MTP connection and transfer all files (pictures, videos, music, hentai folder .. etc) to PC
fast and efficient
Thanks for that.
I can save my stuff but still won't know if I been hacked or not??
GusTheHun said:
Thanks for that.
I can save my stuff but still won't know if I been hacked or not??
Click to expand...
Click to collapse
those damn xxxxx they are on the move again
Mod Edit: Content edited