Q&A for [ROM][4.4.2] Micromax A117 Kitkat Stock ROM [ No bugs ]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.2] Micromax A117 Kitkat Stock ROM [ No bugs ]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
waiting for MAJOR BUG fix(BATTERY)
Captain sparrow said:
[ROM][4.4.2] Micromax A117 Kitkat Stock ROM [ No bugs ]
Rom Features:
Pure AOSP
Pre-rooted
Super Smooth
Busyboxed
DOWNLOADS :
A117 Pure kitkat stock ROM
INSTRUCTIONS :
Step by step Guide to install ROM
XDA:DevDB Information
[ROM][4.4.2] Micromax A117 Kitkat Stock ROM [ No bugs ], ROM for the Micromax Canvas Magnus A117
Contributors
Captain sparrow, Captain sparrow
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Stable Release Date: 2014-09-08
Created 2014-09-08
Last Updated 2014-09-11
Click to expand...
Click to collapse
THANKS TO THE DEVELOPER FOR MAKING THIS AWESOME ROM........BUT BRO PLEASE FIX THIS BATTERY DRAINING ISSUE AS THE BATTERY CONSUMPTION IS CONTINUOUS EVEN IT IS IN SLEEP MODE ...PLEASE FIX THIS ISSUE A SOON AS POSSIBLE (your effort as very valuable to us)..
MD5 verification failed
i have installed philz recovery and whenever i try to flash this rom on my phone it gives me MD5 verification failed error..what should I do?
Battery drain issue Not resolved yet
I have been using this ROM and the battery drain issue is a real pain point... any luck fixing this ?
KITKAT stock rom
usb otg is not working and battery draining continously
else the rom is good
awesome rom
The ROM is just awesome. Hatsoff!!! For the work. But can you fix battery drain problem. The battery decreases when the phone is at standby. Also I can't send files through WiFi.
Good job...
memory card
i cant access to my memory card. also dont have any usb drive option. battery draining . without this the rom is incomplete . plz do something.
thanks fr developing the rom its smooth really.
---------- Post added at 10:50 AM ---------- Previous post was at 10:44 AM ----------
i cant access to my memory card even giving file manager to root access . also don't have any usb drive option. battery draining . without this the rom is incomplete . plz do something fr usb connection and memory card access issue ..
thanks fr developing and the rom its smooth really:good::good::good::good::good:.
great rom but full of bugs
everything is perfect if u fix these bugs
1. battery draining path (draing battery in sleep mod )
2. usb connet path (dont have any usb connection option)
3. file maneger path (file maneger shows internal as a external and external as a internal) and original sd is write protected even root permission not write the sd.
i know canvas magnas dont have any stable kitkat carnal but if u fix this problem then this rom is going perfect.
good luck
Related
SYSTEM PARTITION NEEDED
Features of Android 4.4 KitKat on MicroMaX Canvas 2+ A110Q
-Latest Android 4.4.2
-Latest Android 4.4.2 Android L Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
And Many More.........
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** feature updates **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : DinasNet, Besik_13, 4pda, xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
DOWNLOAD
CUSTOMROMS.THESWAPNIL.COM
UF
XDA:DevDB Information
LegenD Rom v8 Android L Edition 4.4.2 for MicroMaX Canvas 2+ A110Q, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=577004&st=1520#entry35294197
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4
Version Information
Status: Testing
Created 2014-11-13
Last Updated 2014-11-13
LED works?
theswapnil said:
SYSTEM PARTITION NEEDED
Features of Android 4.4 KitKat on MicroMaX Canvas 2+ A110Q
Click to expand...
Click to collapse
LED works fine? Because on the Russian Thread it is mentioned that LED doesn't work. Please tell me because I'm eager to try this ROM.
DarkSJ1998 said:
LED works fine? Because on the Russian Thread it is mentioned that LED doesn't work. Please tell me because I'm eager to try this ROM.
Click to expand...
Click to collapse
Led not working in this other than that good rom.
Oh!
Samuel117 said:
Led not working in this other than that good rom.
Click to expand...
Click to collapse
Thanks bro for the early reply... Hope this bug can be fixed in the near future.... :good:
Have you tried this ROM? Did you experience any bug? Proximity Sensor works fine?
This ROM will be the choice for most people who want to enjoy CM11's Lollipop theme look on their C2+ but can't because of the Front Camera Bug.
Both sim not working
tried several times no result
Check if your IMEI is Broken
BHATT said:
tried several times no result
Click to expand...
Click to collapse
Check if whether you have lost your IMEI. Because of broken IMEI, Network doesn't work
Bugs I face will be shown here:
When I flashed your ROM, my first expression on booting up of ROM was "Wow". :laugh: The ROM really looks like Android L. Moreover, Android L Apps are included in the ROM.
Here are the problems/bugs faced by me:-
DPI is very high. The Quick Buttons in the Notification Drawer do not show up properly. They get of their frame. :silly:
I didn't like the new Boot Logo. Can you please provide a patch for reverting to the Stock "Canvas" Boot Logo?
The Lenovo Camera and Gallery hang a lot.
The Good: :good:
The ROM is really very nicely themed to look like Android Lollipop.
The included Android L apps look very nice.
Overall, a great ROM, but could be better if the upper things were corrected. :fingers-crossed:
camera stopped working.........
Ohh ****
Ohh **** man I am going to upload my Lollipop Experince ROM today
But my rom its better than your rom it is CM 11 based and 85% its material design and enjoy full lollipop experince.
Can someone upload some more screenshots ,,,,, status bar screenshots, ram,apps
Review
After Using for 2-3 Days,My Review For the Rom is that Rom is Working Bugless and Without Lag Even Notification Light Works.
Great Work Dev @theswapnil,Expecting Many Such Type Roms in Future.All D Best !
technoking2020 said:
After Using for 2-3 Days,My Review For the Rom is that Rom is Working Bugless and Without Lag Even Notification Light Works.
Great Work Dev @theswapnil,Expecting Many Such Type Roms in Future.All D Best !
Click to expand...
Click to collapse
Thank you very much ..
Nice rom...
I m using this rom from almost 1 week n its much stable for day to day use...
I used some xposed modules such as flat style colour bars and gravity box now it looks even more cool...
It would be even great if u can do something to get lollipop style recent apps...
I used fancy user...
Bt its full of bugs....
Please tell me anyone that having any problems or bugs with this ROM....
Iam using hridayhs developed rom 4.4.4 themed 5.0....
Having cm11 bugs...
Please reply me asap....
Thanking you....
No bugs
ejaz.msgs said:
Please tell me anyone that having any problems or bugs with this ROM....
Iam using hridayhs developed rom 4.4.4 themed 5.0....
Having cm11 bugs...
Please reply me asap....
Thanking you....
Click to expand...
Click to collapse
Please Read others comments (above) then decide.
theswapnil said:
Please Read others comments (above) then decide.
Click to expand...
Click to collapse
In your webpage,
There is a patch to install but no file...
Plz reply asap...
Thanking you...
Thread Closed, Test Phase is over now
New Thread:
http://forum.xda-developers.com/micromax-a110/development/rom-mmx-a110-t2972561
Hi all
Thread in construction .... not much time now
FOR Developers ONLY
Rules:
- No requests
- No Spamm
- No "port to my device" spamm "
KitKat is now Booting on MTK 6577, only few bugs left to be fixed.
New Kernel is required of course.
For Now its booting on my some mt6577 devices
Im opening this thread on behalf of QUS1
--> I'll support this development also (im working on the build for ZTE v970)
IF, you wish to adapt (THIS IS NO copy/paste PORT), real work to be made. Then share your work here, and maybe you can work the rom to your device also...
KITKAT s9081 BETA1
** post for developers and alpha testers **
This is built from MTK s9081 project, and its possible to adapt to:
-MICROMAX a110
-WIKO CINK KING
-Fly IQ450 Horizon
may be more modifications
RECOMENDATION RECOVERY FOR INSTALLATION:
http://droid-devz.com/viewtopic.php?f=8&t=482
DOWNLOAD:
(beta1 port from MotorolaRAZR D3 XT920) By: Qus1
https://yadi.sk/d/a3OYnZKPckNi3 too many downloads, re-upload to google drive for alternative link here https://drive.google.com/file/d/0B9Xy2GDF0is9RlhiNGtmTGloZjg/view?usp=sharing
TEST PATCHES:
patch for kernel 1.2
if ur revision ics - https://yadi.sk/d/3gDqwFQpcqEQg camera OV8825, OV8826
if ur revision jb - https://yadi.sk/d/sa555YnocqESA camera OV8825, OV8827
(MY ZTE v970 build will be posted on another thread)
its would be good to add more developers 6577 for kk :laugh:
GPL Compliance:
ZTE v970 (will upload in some hours /tomorow ...)
https://github.com/dragonpt/Kernel_3.4.67_KK_ZTE_v970
Wiko Cink King
https://github.com/qus1/s9081_kk_beta1
Regards
XDA:DevDB Information
[ROM][WIP]KITKAT s9081 , ROM for the Micromax A110
Contributors
superdragonpt, qus1
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP / MTK
Version Information
Status: Alpha
Created 2014-11-18
Last Updated 2014-12-13
Reserved
Kernel Goodies / Info
Kernel Info:
New Custom Kernel to support KitKat
kernel version: 3.4.67
Governors available:
Hybrid <--Default
ondemand
userspace
powersave
performance
I/0 Schedulers available:
cfq <-- Default
noop
deadline
TCP Congestion Control:
cubic <-- Default
reno
bic
westwood
highspeed
hybla
htcp
vegas
veno
scalable
Ip
yeah
illinois
Other Kernel Features:
ZRAM <-- Enabled as Default
SDCard Read Ahead 128KB
F.A.Q.
Q: How can i acess the MTK Engineering Menu?
A: On the dialer : *#*#3646633#*#*
Q: What Can i do, on the MTK Engineering Menu?
A: The Engineering Menu, should be for Advanced users only, there's several things you can do.
a) Increase The volume speaker volume: >hardware testing>Audio>LoudSpeaker Mode> And set MAX Vol with an max value of 160 (145 as safe)
b) The same options, as in JellyBean MTK Eng Menu.
Q: What are the Partitions Layouts usable on This ROM/KitKat ?
A: BOTH Partitions are usable (Stock and Extended), however on stock Partition Layout, the Internal SDCard can´t be used as is not visible due to the new KitKat fstab (partition table)
--> It is possible to swap internal and external storages, apply the patch by :Akhilendra Gadde HERE
Q: My 2G / 3G Network doesn't show , what can i do?
A: You must change the current modem on the rom, check This reply
Q: I have the Extended Userdata Partition Layout, do i need to flash any disabled Internal SDCard?
A: NO, There's nothing you need to do or flash
Q: Is this ROM Multi-Language ?
A: Yes
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: You can download any app from the PlayStore, i recommend the Trickster MOD
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where can i change the Android Runtime from Dalvik to ART and vice-versa?
A: You can change on the Developer Options
Q:I changed the Android Runtime from Dalvik to ART and app "x" is not working , why?
A: That's rather normal, not every app is compatible with ART.
Q: Is Xposed Framework and his modules compatible with ART?
A: NO, Xposed Framework and his modules (like GravityBox), are not compatible with ART
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay qus1 and me an beer(s) :fingers-crossed:
superdragonpt said:
Screens:
Click to expand...
Click to collapse
wooww sir giving it a try...on a110
EDIT:- Just want to clarify is it a sorce built or a port
Man is it working on your phone
WELCOME BACK Superdragonpt!
qus1, good to see you here on XDA.
Damn Excited! All the best
All the best developers! Please get 4.4 for c2 !
Faaiz Puthawala said:
wooww sir giving it a try...on a110
EDIT:- Just want to clarify is it a sorce built or a port
Click to expand...
Click to collapse
Kernel: built from source
ROM: ported
The wiko build works on MMX a110
How to flash:
Flash just like any other ROM.
What works:
Pretty much everything
Not working/ needs more work:
Internal SD not recognized in some hardware revisions ( emmc NAND)
Camera works depending on the hardware revision...( Kernel related)
ART ( can be Buggy , this is MTK Fault)
You tell me
Qus`s Kernel works on mmx a110, only some things needs to be fixed...
Dont forget to thank qus1
Regards
superdragonpt said:
The wiko build works on MMX a110
How to flash:
Flash just like any other ROM.
What works:
Pretty much everything
Not working/ needs more work:
2G (3G works)
Internal SD not recognized
Camera ( Kernel related)
ART ( Buggy , this is MTK Fault)
You tell me
Qus`s Kernel works on mmx a110, only some things needs to be fixed...
Dont forget to thank qus1
Regards
Click to expand...
Click to collapse
sir i dont know why
But My back camera works
Internalsdcard also works
ART Also working Well
And dont know About 2G As I dont have A Data Plan
EDIT:-2G also works...almost bugless rom only proximty not working
Thanks for The feedback, edited The -not working- list
Test as you can, your feedback is important,.
Qus1 is working with The wiko build.
Im working on The ZTE V970 build, and will help The MMX build as i can... Along with qus1
Regards
Final Review Of The Rom
The Original Zip Was Not Working With TWRP v2.7.1.0+.But Was Getting Installed With Twrpv2.5.0.0
And There Were Errors Like
Rear Cam,2G Not Working And More
Just moddified The Zip And Gets Installed On TWRP V2.7.1.0
And Only Proximaty Sensor Not Working
Will Upload The Zip Till Tomoorow
finally our savior is back
bro if you need alpha or beta tester you can count on me PM with the zip folder so i can test on my zte v970 (tmn a18)
Faaiz Puthawala said:
Final Review Of The Rom
The Original Zip Was Not Working With TWRP v2.7.1.0+.But Was Getting Installed With Twrpv2.5.0.0
And There Were Errors Like
Rear Cam,2G Not Working And More
Just moddified The Zip And Gets Installed On TWRP V2.7.1.0
And Only Proximaty Sensor Not Working
Will Upload The Zip Till Tomoorow
Click to expand...
Click to collapse
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
superdragonpt said:
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
Click to expand...
Click to collapse
Sir tried on CWM too...there was same error while installing
after moddifying it worked fine
qus1 made an new patch for camera and sensors
check OP
Report
Got an error while flashing using "[RECOVERY] TWRP 2.7.1.0 touch recovery [selinux][source built] by bindassdost"
then,
Wiped all the partitions thrice
rebooted the recovery
and flashed the zip again using same recovery,
but this time it got installed successfully and Rom booted.
....
What Works!!
Both Internal and External SD
3G Works on Both SIMS
Front Camera and Rear Camera Working(After applying Patch)
Proximity Sensor(but little buggy)
....
What Doesn't!!
2g Network Not working (Sim Card Goes Inactive)
Notification LED is not working(works only while charging)
....
Navigation Keys occupies little screen space and it is bit annoying as we already have softkeys. Req dev, pls remove the nav bar.
No SIM Management in System Settings(no facility to turn sim's on/off)
....
Rest all cool and now a proud owner for C2. Hopefully All the remaining bugs will get fixed soon too!! Thanks a ton dev for all the hardwork
can someone make a rom for alcatel 997d?
http://forum.xda-developers.com/showthread.php?t=1981692&page=114
walter91 said:
can someone make a rom for alcatel 997d?
http://forum.xda-developers.com/showthread.php?t=1981692&page=114
Click to expand...
Click to collapse
Sir read the OP no porting spam
---------- Post added at 01:17 AM ---------- Previous post was at 01:16 AM ----------
Will try this on MyPhone A919 duo clone of MMX A110 and C2, etc *crossing-finger*
---------- Post added at 01:19 AM ---------- Previous post was at 01:17 AM ----------
superdragonpt said:
Use CWM ...
TRWP should work just fine,,, i don't know how these "twrp builds" where made...
Regards
Click to expand...
Click to collapse
do we need to use the selinux version of CWM for this? e.g ->http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175 Bindassboost cwm for kitkat? or any CWM nad TWRP work? hehe enlighten us sir
---------- Post added at 01:57 AM ---------- Previous post was at 01:19 AM ----------
Works on MyPhone A919 duo! MMX A110 clone, all camera is working, but the rest to follow
not working usb storage for phone storage cant be seen on computer when mounted the rest works fine will test for a day though
SYSTEM PARTITION NEEDED
Features of MiUi rom on MicroMaX Canvas 2+ A110Q MTK6589
Here is a fully miui V5 4.11.30 ported from Star n7589 device.
- MiUi 4.2.2
- Good Battery Backup
- Playing Games Smoothly
- Buttery Smooth
- 3G SIM Switch
- Sim Toolkit
- Init.d Scripts
- Full dual sim support
- Fast, smooth, stable
- Extended power menu
- 3G active sim card switch
- Some layouts fixes
- Deleted all useless chinese apps
- MIUI camera WORKING inc front camera videorecording!
- 2G/3G toggle fixed
- EngineerMode built-in
- VIPER4ANDROID built-in
And Many More.........
Full ROM 4.11.30
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : NeedRom, xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar )
DOWNLOADS
customroms.theSwapnil.cOM
XDA:DevDB Information
MiUi V6 looks like 4.11.30 ROM (updated) For MicroMaX Canvas 2+ A110Q MTK 6589, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=458600&st=3840#entry36158745
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-01-12
Last Updated 2015-01-12
Used miui for the first time..
Nice rom..
Bt i found some bugs in rom..
1.Camera app not working.
Some graphic problem on upper right corner of many apps such as file explorer, settings & 2.themes app.
3.Weather app not working.
4.Some wired problem with keyboard when we try to erase any word longer then 3 alphabets in it.
5.Prevent pocket dials not working.
mohitk144 said:
Used miui for the first time..
Nice rom..
Bt i found some bugs in rom..
1.Camera app not working.
Some graphic problem on upper right corner of many apps such as file explorer, settings & 2.themes app.
3.Weather app not working.
4.Some wired problem with keyboard when we try to erase any word longer then 3 alphabets in it.
5.Prevent pocket dials not working.
Click to expand...
Click to collapse
Sorry Bro,
I am not facing this problems like camera app not working. I am using this rom from last 4-5 days. If any other facing above problem Please inform me.
regarding camera...
mohitk144 said:
Used miui for the first time..
Nice rom..
Bt i found some bugs in rom..
1.Camera app not working.
Some graphic problem on upper right corner of many apps such as file explorer, settings & 2.themes app.
3.Weather app not working.
4.Some wired problem with keyboard when we try to erase any word longer then 3 alphabets in it.
5.Prevent pocket dials not working.
Click to expand...
Click to collapse
.......you need to patch the cam .. you may also have to patch for sound to achieve excellent sound output..
will upload those patches sooner
---------- Post added at 06:42 PM ---------- Previous post was at 06:32 PM ----------
theswapnil said:
SYSTEM PARTITION NEEDED
Features of MiUi rom on MicroMaX Canvas 2+ A110Q MTK6589
Here is a fully miui V5 4.11.30 ported from Star n7589 device.
- MiUi 4.2.2
- Good Battery Backup
- Playing Games Smoothly
- Buttery Smooth
- 3G SIM Switch
- Sim Toolkit
- Init.d Scripts
- Full dual sim support
- Fast, smooth, stable
- Extended power menu
- 3G active sim card switch
- Some layouts fixes
- Deleted all useless chinese apps
- MIUI camera WORKING inc front camera videorecording!
- 2G/3G toggle fixed
- EngineerMode built-in
- VIPER4ANDROID built-in
And Many More.........
Full ROM 4.11.30
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : NeedRom, xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar )
DOWNLOADS
customroms.theSwapnil.cOM
XDA:DevDB Information
MiUi V6 looks like 4.11.30 ROM (updated) For MicroMaX Canvas 2+ A110Q MTK 6589, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=458600&st=3840#entry36158745
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-01-12
Last Updated 2015-01-12
Click to expand...
Click to collapse
I love miui rom for its simplicity/battery life/faster/stable..... excellent work bro... you are genius to provide this.... we need more work from u porting miui rom updates
may be cam problem arise if we flash from other custom rom .. to avoid we can flash from v3 stock rom to miui rom or else we may need patch to fix those bugs.
I updated from miui 4.10.31 to 4.11.30 but landed with same cam problem and low audio quality but I luckily had a patch for both these and able to fix it. now everything fine . I could say 99.9% bugless
camera fix.....
flash this zip to make the camera working..
I couldn`t provide link because of restrictions to the new member .. there is a fix provided for a110q in xda forum under heading MIUI 5 V3.12.15 for a110q.. google/download/fash/enjoy
SYSTEM PARTITION NEEDED
Features of MiUi rom on MicroMaX Canvas 2+ A110Q MTK6589
Here is a fully miui V5 4.11.28 KitKat 4.4.2
- Good Battery Backup
- Playing Games Smoothly
- Buttery Smooth
- 3G SIM Switch
- Sim Toolkit
- Init.d Scripts
- Full dual sim support
- Fast, smooth, stable
- Extended power menu
- 3G active sim card switch
- Some layouts fixes
- Deleted all useless chinese apps
- MIUI camera WORKING inc front camera videorecording!
- 2G/3G toggle fixed
- EngineerMode built-in
- VIPER4ANDROID built-in
And Many More.........
Full ROM 4.11.28 KitKat 4.4.2
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
coming soon
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
Original ROM Developer :- forum.pittech.net, yavuz21.
(credit : DinasNet , NeedRom, xda developers, 4pda.net . If I forgot a any developer name please suggest me I will add & Swapnil Bunjkar )
All things happen because of all above users, developers and forums, so give Thanks and Credit them,
I am not developer I am just Porter.
DOWNLOADS
customroms.theSwapnil.cOM
XDA:DevDB Information
MiUi V6 looks like 4.11.28 ROM (KitKat 4.4.2) For MicroMaX Canvas 2+ A110Q MTK 6589, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://forum.pittech.net, 4pda.net
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4
Version Information
Status: Stable
Created 2015-01-17
Last Updated 2015-01-17
system partition
hey plz help me how to dso system partition in micromax a110q plz reply early
Read carefuly
rajesh054 said:
hey plz help me how to dso system partition in micromax a110q plz reply early
Click to expand...
Click to collapse
http://forum.xda-developers.com/micromax-canvas-2/general/increase-partition-a110q-t2568182
screenshots
screenshots plzzzzz
bugs
any one plz post if there any bugs
theswapnil said:
http://forum.xda-developers.com/micromax-canvas-2/general/increase-partition-a110q-t2568182
Click to expand...
Click to collapse
i can use your rom for zopo c2/zp980 ?
SYSTEM PARTITION NEEDED
Features of Android 4.4 KitKat on MicroMaX Canvas 2+ A110Q (MTK6589)
-Latest Android 4.4.2
-Latest Android 4.4.2 Stock Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
And Many More.........
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : arraki, NeedRom, xda developers, 4pda.net . If I forgot a any developer name please suggest me I will add defiantly & Swapnil Bunjkar )
All things happen because of all above users, developers and forums, so give Thanks and Credit them,
I am not developer I am just Porter.
DOWNLOADS
Customroms.theSwapnil.cOM
Mirror
for root problem flash this
XDA:DevDB Information
XPERIA Z3 V3.0 Kitkat 4.4.2 for MicroMaX Canvas 2+ A110Q (MTK6589), ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://forum.turkdevs.com/konu-4-4-2-xperia%E2%84%A2-z3-v3-0-dr-razor%E2%84%A2.html
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4
Version Information
Status: Stable
Created 2015-03-12
Last Updated 2015-03-12
Root Problem solved
Root Problem solved
for phone memory mount use MTP
Links dead please upload it . i want to try this rom
---------- Post added at 04:27 PM ---------- Previous post was at 04:23 PM ----------
[download error showing after clicking on uf and i click on fb like but it shows error pls try again.