I was going to post this in the Atrix 2 section, but I saw similar threads that mentioned this would be a better place to post.
Basically, I'm running stock ICS on my Atrix 2 with a LapDock 500, everythings working great. Now I'm looking to get my PS2 controller to work over USB (it works with MotionInJoy on my PC), but im not having any luck. Is there a particular app I should grab? The 2 mentioned most often are USB Joystick Center and SixAxis, but neither seem to detect the USB controller.
Related
Hi all,
Got myself a SGS3 and am dabbling with the controller input app Joy center, using it mostly for xbox 360 controller input.
For the most part it works great, although L3 and R3 don't respond, it's still good.
My question is, is it possible to get a two player on the go using this app?
I've tried with a mock ps3 controller (wired) and an xbox controller wired, but it only allows one input at a time.
Does anyone have any hands on experience with this as of yet?
I know it's possible with bluetooth via the six axis controller app, but i don't have two ps3 controllers laying about, i do have multiple wired xbox 360 controllers so that's why i'm asking.
I also have the official mhl cable, but that's another story.
Any help on this would be greatly appreciated.
Cheers.
PS: Not sure if anyone else has yet seen these beauties (well not the prettiest but still cool)
Announced at e3, should be out in the autumn.
Finally a dedicated BT controller, works on all v3 + devices.
http://www.androidauthority.com/nyk...controllers-to-be-released-in-the-fall-92851/
After spending an hour modding my OG atrix lapdock to work wth my Atrix 2 with the specific purpose of being able to plug in a mouse and keyboard or controller to play Shadowgun: Dead Zone... I've discovered two things
1. or whatever reason the Lapdock's USB ports are not read by USB/BT Joy Center - so i cannot use the gamepad to touch mapping function
2. The Lapdock keyboard is being detected as a gamepad - having a game pad present disables touch in shadowgun games... so i can't even use the native mouse to spawn and THEN plug in my gamepad to play.
Does anyone have a solution for this other than getting a PS3 controller to map with Blue tooth? lol I dont have a ps3 I have a 360
Swift replies, much help offered. Best forum evar. Thousands of unanswered threads like this.
Just because your question isn't answered doesn't mean that it is ignored. It may simply be that there are not any other people who have attempted to do what your doing here... the Atrix 2 community is a relatively small one on XDA. I would try post in the Atrix 4G forums, the original atrix functioned the same way with shadowgun and the lapdock... perhaps someone there will be able to help you
I'm not sure if this will work the way you want, but perhaps you could only plug in the hdmi cable and leave the usb port disconnected. Then, attach a usb otg adapter or cable to run your controller. This would require dangling wires because you wouldn't be able to dock it anymore since you would need access to both ports. Or, you might be able to make a little pigtail with the usb cable out of the docking area and to an otg adapter/cable.
Sorry, I don't know enough of the software end to know how to disable the keyboard and get what you want. You could potentially disconnect the hardware of the keyboard/touchpad and then you would essentially have an hdmi monitor and two usb ports.
Good luck!
Sent from my MB865 using xda app-developers app
Actually have the same problem with that game, although mine was a usb controller for pc.
The bright side is that the old Shadowgun actually does works pretty good with the same controller, maybe the guys from Madfinger would apply it later to DZ.
EDIT: Shadowgun DZ had an update, where they included gamepad support.
But it's still buggy with lapdock, you have to chose NOT to detect HDMI cable (in display settings) before you connect the phone to the lapdock, connect your gamepad and use your phone display to play.
I'm sure there is a way to overcome that thing.
Ok so I have a Playon wireless controller for pc (I cant find any reference to this brand online) which I Bought a few years ago. It has a usb reciever and has an LED on it that indicates that it is communicating with the usb dongle and has small text under it saying RX 2.4 ghz. The problem is that I would like to connect it to my HTC desire s but I've had problems with using usb host ( an easy way to use an otg cable would be appreciated) is there a way to connect it to my desire s, as I also have several wireless ps2 controllers but I think they use the same system.
Me, too
Rudolph Venter said:
Ok so I have a Playon wireless controller for pc (I cant find any reference to this brand online) which I Bought a few years ago. It has a usb reciever and has an LED on it that indicates that it is communicating with the usb dongle and has small text under it saying RX 2.4 ghz. The problem is that I would like to connect it to my HTC desire s but I've had problems with using usb host ( an easy way to use an otg cable would be appreciated) is there a way to connect it to my desire s, as I also have several wireless ps2 controllers but I think they use the same system.
Click to expand...
Click to collapse
[BUMP(i think)]
Rudolph, I have the exact same problem!
I have a Logitech Cordless Precision Controller, apparently made for the PS3, and it says it runs on 2.4ghz wireless.
If Bluetooth is on the 2.4ghz spectrum, then surely it should be able to cross-connect with a little bit of freeware.
XDA Developers should try to come up with something like this, because that would open a whole new spectum of devices that could be connected.
In any case, there should definitely be some way to connect these devices.
My controller doesn't have a usb port, but I have another older one that I got from a thrift shop that works amazing on my laptop, but when I try to plug it into my kindle through a coupler and the actual kindle cord, it doesn't give power to the controller, as its a normal usb-only controller, so it doesn't have batteries.
New Idea
So, it seems the solution may lie in the controller, maybe it would be worth getting a cheap controller somewhere and adding a battery to the circuit. That is if the phone would recognise it.
Hello guys, So i buy today a Otg usb cable with the hopes of been able to play with my old Logitech Cordless Rumblepad 2 but i can make it work.
I connect the Adapter and the light is on but the buttons dont do anything. is not a battery issue because the Gamepad works on my computer.
And i try other things like a Mouse and Pendrives Otg and work just fine.
Any suggestions?
PD: Im on Stock Kitkat without root or anything
PPD: I Try with my Ps3 Dualshock3 controller and the light start because is charging but anything happen when i press the buttons....
I find the OTG capabilities of Moto G rather disappointing. When I read about Android and OTG before buying this phone I thought most of it would work out of the box. I' ve been struggling with OTG most ofbthe time. Took me ages to figure out where to find usb stick. I would also like to connect a gamepad to my device. Wiimote are no longer supported one new JB as I soon found out and it seems you need to root your phone for sixaxis to work. Too bad, i dont want to buy an extra BT gamepad for my phone.
Indeed Disapointed, and seems like noneones cares too much to make a solution, i search everywhere i know in the internet and i dont find anything, seems like the only gamepad that works right away is the Xbox one controller (that i dont owne). a little help from the developers would be very nice.
at least a straight answer to this subjet...
I have a wired xbox gamepad connected to my pc. Havent tried it yet. Might give i a try.
For some odd reason my Bluetooth won't turn on anymore, so my controller is useless now.
I bought a xbox 360 gamepad to find out the device doesn't power it (and they won't even refund grrr). Could anyone who has a working WIRED controller share it's model? Just so I can buy one safely, knowing it'll work.
The Xbox gamepad stopped working with Lollipop for me. Used to work on Kitkat. So if you wanna go back...
Greatnesss said:
The Xbox gamepad stopped working with Lollipop for me. Used to work on Kitkat. So if you wanna go back...
Click to expand...
Click to collapse
I am on KitKat and it doesn't work already.
Odd. It used to work for me. Is this an MS original or a third party controller you're using. Also, this is a wired controller right? Not a wireless connected with a charger cable because that won't work.
Greatnesss said:
Odd. It used to work for me. Is this an MS original or a third party controller you're using.
Click to expand...
Click to collapse
An original MS controller for xbox 360. The 4 circle leds would just keep blinking together.
never ever worked on my 8.4 tab s, wired proper 360 controller.
such a shame as there are some good games like raiden as well as the emu stuff.
DrEzkimo said:
never ever worked on my 8.4 tab s, wired proper 360 controller.
such a shame as there are some good games like raiden as well as the emu stuff.
Click to expand...
Click to collapse
I'm not talking specifically about 360 controllers though. I'm asking if there's ANY wired controller that is known to work with this tablet. ANY brand.
Before I got my wireless bluetooth controller I was using a Game Elements Recoil model GGE909 over a dirt cheep usb otg adaptor. I never could get my usb Xbox controller to work so I just fell back on an old cheep usb one I had and it worked great aside from taking up a usb port. My galaxy tab s is the 8.4 wifi model so I can't guarantee it will work but it probably should with your 10.5.
360 Controller never worked, if you get a powered OTG adaptor it might work. Lots of people talk about the MOGA controllers as bluetooth controllers that work well.
acdbrn2000 said:
Before I got my wireless bluetooth controller I was using a Game Elements Recoil model GGE909 over a dirt cheep usb otg adaptor. I never could get my usb Xbox controller to work so I just fell back on an old cheep usb one I had and it worked great aside from taking up a usb port. My galaxy tab s is the 8.4 wifi model so I can't guarantee it will work but it probably should with your 10.5.
Click to expand...
Click to collapse
interesting, I also just want any old game pad to work but only have the 360 pad. ill see if i can get another controller and see if that works.
btw what bluetooth controller did you get?
DrEzkimo said:
interesting, I also just want any old game pad to work but only have the 360 pad. ill see if i can get another controller and see if that works.
btw what bluetooth controller did you get?
Click to expand...
Click to collapse
For usb controllers and usb otg I tend to find the ones that don't need special drivers or programs to run on windows tend to work the best.
The bluetooth controller I got is the gamestop red samurai v2. Nice layout, good buttons and triggers(not analouge though), well placed analouge sticks for the few android apps that support those, and great compatability. Overall I really like it and best of all gamestop is getting rid of tablet accessories so they are dirt cheep.
acdbrn2000 said:
For usb controllers and usb otg I tend to find the ones that don't need special drivers or programs to run on windows tend to work the best.
The bluetooth controller I got is the gamestop red samurai v2. Nice layout, good buttons and triggers(not analouge though), well placed analouge sticks for the few android apps that support those, and great compatability. Overall I really like it and best of all gamestop is getting rid of tablet accessories so they are dirt cheep.
Click to expand...
Click to collapse
ah I assume thats over in the US and not available here in the UK :*(
how much is dirt cheap as I do have some friends over there and if its that cheap, might be worth having one sent.
I picked up my near console (unlike the ouya) grade controller for $7.97 U.S. No clue what they cost online, but most of the gamestops that still have tablet accessories are selling those accessories cheaply to reduce inventory that the company is moving away from.