morn_06 said:
>> I had the sample problem but i installed the HTC Sync Manager and then it worked.
It seems that the USB drivers of the device are not in the SDK from Google but in HTC's software.
i didn't understand how to "run the recovery bat file...while connecting the phone in fastboot usb mode." or "run bat file from desire vc recovery to install recovery.(phone in fastboot mode)"
EDIT: I've successfully rooted my phone!
Here is what you have to do:
1. Unlock bootloader (following htcdeveloper's instructions) - It took me sometime and i got stuck with the "waiting for device" for a while but then i installed HTC Sync Manager and i could finish that 1st step successfully. (When i go to the bootloaed i can see "Unlocked")
2. Copy the file "recovery.bat" (which was a chinese file "点我运行.bat" so i had to rename into "recovery.bat") at the root of the internal memory and i also put the folder "files" (which was with it from the .rar i downloaded) including: adb.exe / AdbWinApi.dll / AdbWinUsbApi.dll / fastboot.exe / recovery.img
(i'm not sure that is useful but i did it)
3. Copy the file "root.zip" at the root of the SD Card BUT rename it "update.zip"
4. Selected the "debugging mode" and "disk drive" as choice per default when i plug the USB cable
(i'm not sure that is useful but i did it)
5. I restarted the device and go to the bootloader. (Pressing both "Power button" + "Volume -")
6. The menu is : Hboot / Fastboot / Recovery / Factory reset / Simlock
Choose "Fastboot" and plug the USB cable ("Fastboot" became "Fastboot USB")
From your computer, launch "recovery.bat" file, a window will appear, press "Enter" and wait a few seconds.
my problem is here only.after i pressed enter .i am not getting any chinese menu on my phone.please help
Click to expand...
Click to collapse
morn_06 said:
>> I had the sample problem but i installed the HTC Sync Manager and then it worked.
It seems that the USB drivers of the device are not in the SDK from Google but in HTC's software.
i didn't understand how to "run the recovery bat file...while connecting the phone in fastboot usb mode." or "run bat file from desire vc recovery to install recovery.(phone in fastboot mode)"
EDIT: I've successfully rooted my phone!
Here is what you have to do:
1. Unlock bootloader (following htcdeveloper's instructions) - It took me sometime and i got stuck with the "waiting for device" for a while but then i installed HTC Sync Manager and i could finish that 1st step successfully. (When i go to the bootloaed i can see "Unlocked")
2. Copy the file "recovery.bat" (which was a chinese file "点我运行.bat" so i had to rename into "recovery.bat") at the root of the internal memory and i also put the folder "files" (which was with it from the .rar i downloaded) including: adb.exe / AdbWinApi.dll / AdbWinUsbApi.dll / fastboot.exe / recovery.img
(i'm not sure that is useful but i did it)
3. Copy the file "root.zip" at the root of the SD Card BUT rename it "update.zip"
4. Selected the "debugging mode" and "disk drive" as choice per default when i plug the USB cable
(i'm not sure that is useful but i did it)
5. I restarted the device and go to the bootloader. (Pressing both "Power button" + "Volume -")
6. The menu is : Hboot / Fastboot / Recovery / Factory reset / Simlock
Choose "Fastboot" and plug the USB cable ("Fastboot" became "Fastboot USB")
From your computer, launch "recovery.bat" file, a window will appear, press "Enter" and wait a few seconds.
my problem is here only.after i pressed enter .i am not getting any chinese menu on my phone.please help
Click to expand...
Click to collapse
This is going to be pretty long and have had the problem for months so please bear with me, read and see if you could assist.
Borrowed a friends Nexus S a while back. Used it for a few days, turned it on one day and it stays on the black google screen with the open padlock at the bottom
I am able to enter Fastboot mode is shown in image 2; lock state is unlocked.
I followed the instructions as in post 2 on the following thread
HTML:
http://forum.xda-developers.com/showthread.php?t=1787169
and as copied below but when i got to the part where i needed to mount my sdcard i get the error " unable to write to ums lunfile (no such file)".
Originally Posted by SamuelDebruyn View Post
Ok, you'll need a Windows computer to fix this. Linux should work too but if you're using Linux I guess you could figure out what would be the instructions for Linux yourself. Mac would work too but I don't know how.
Download and install the Android SDK on your computer from http://developer.android.com/sdk/index.html
Open the SDK Manager (there should be a shortcut in your start menu) and install "Android SDK Tools" and "Android SDK Platform-tools" and "Google USB Driver" (it's in Extra).
Turn your phone off, take the battery out, look at the bottom of the phone and write down the model number.
Now go to https://developers.google.com/android/nexus/images and download the factory image for your model for version 4.0.4.
You'll need something like 7-Zip (http://www.7-zip.org/) to open it.
Copy image-so....zip, radio-crespo...img and bootloader-crespo...img from the factory image to the platform-tools directory (on most computers it will be C:\Program Files (x86)\Android\android-sdk\platform-tools and you'll need Administrator rights).
Now open the platform-tools directory from the Android SDK and right click on an empty space while holding the SHIFT button and select "Open command prompt here".
Put the battery back in your phone and press Power while holding the Volume-Up button so it will boot into fastboot mode. Then connect it to your pc.
If Windows starts complaining about drivers then point it your SDK installation directory (include subfolders) or use 7-Zip to unpack http://www.mediafire.com/?5a7gou9droidi53 and point Windows to the directory where you unpacked it. More info on http://www.sevenforums.com/tutorials...e-manager.html
When you type "fastboot devices" and press Enter in the command prompt you opened before it should list one device (being your phone).
If you haven't unlocked your phone before type "fastboot oem unlock" and press Enter. Follow the instructions on the screen on your phone to complete the unlock.
Next type "fastboot flash bootloader bootloader-crespo...img" (you can press TAB to auto-complete) and press Enter. (THIS IS THE MOST IMPORTANT STEP, IF THIS GOES WRONG YOUR PHONE IS SCREWED. Don't continue if another step didn't succeed. If this works, then you can do anything with it.)
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next type "fastboot flash radio radio-crespo...img" (you can press TAB to auto-complete) and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next type "fastboot -w update image-....zip" and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Next download http://download2.clockworkmod.com/re...0.7-crespo.img and also put it in the platform-tools directory.
Then type "fastboot flash recovery recovery-clockwork-6.0.0.7-crespo.img" and press Enter.
Now type "fastboot reboot-bootloader" and press Enter and wait for your phone to reboot into fastboot mode.
Now use the volume keys on your phone to navigate to the word Recovery and press the Power button to boot into recovery.
You're now in CWM Recovery, use the volume keys and the power button to go to Mounts & Storage > Mount USB Storage (you might have to scroll down). Now it will come up on your pc and you can transfer the update file for Jelly Bean to your phone. You can find it here: http://forum.xda-developers.com/show...68&postcount=1 (use the one for your model for IMM76D).
Unmount the usb storage, go back to the main menu and go to Install Zip from sdcard > Choose zip from sdcard and open the update file you just transferred to your phone.
You can now go back to the main menu and choose "reboot system now". It will ask you if you want to remove the auto recovery installation, do that.
That's all, you now have a clean and working Jelly Bean installation.
Someone else wrote down the same instructions if mine are not clear enough: http://forum.xda-developers.com/show....php?t=1785672
Click to expand...
Click to collapse
This prevented me from putting the stock image on the sdcard for flashing via CWM.
is there another way i can get this working, maybe via fastboot or via ODIN so i can return my friends phone.
Thank you.
Hi I had this problem to, mine was from a bad flash / bad firmware.
First I suggest http://forum.xda-developers.com/showthread.php?t=2284670 better recovery.
After from recovery
select factory reset, wipe cache, and from advance wipe dalvic cache.
then select mount usb, copy to card slim bean 3.1.0 http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/465-crespo/2505-slim-ns-3-1-0-official plus gaps http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/461-addonsfullpackages-412/2501-aio-addons, flash them in this order.
After first boot and config u can use http://www.wugfresh.com/nrt/ to write the OEM firmware.
Sorry this didn't work because nothing can be written to system and the sdcard is still not able to mount
Sent from my GT-N7100 using xda app-developers app
Before anything please note to disable Driver Signature Verifications in Windows (Google how to disable them in whatever version of windows you are using).
Then download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
NOW THE PLAY BEGINS.....
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from [here ](http://forum.xda-developers.com/showthread.php?t=2588979)and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Download the TWRP file for the phone here(https://app.box.com/s/3e5ofvi9xtbadbysrp3ytkshl45k3shb) and paste the same on the ADB folder on your C drive.
Download the SuperSU zip file here(http://forum.xda-developers.com/showthread.php?t=1538053) and save on your phone internal SD card.
Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Problem solved
Many people were having problems in the detection of device...i have solved it
Can anyone upload TWRP in Drive or any other place? The box link is all over the internet and is not working as it is out of bandwidth (sucks!). TIA FYI: The box link download button translates to this link
So since no one here seems to have the time or courtesy to provide the link, for the ones who needs it. Here it is.
Thanku soon much bro....just got my YU..will try it later
---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------
Just one question.... Can stock recovery install superuser?
http://forums.yuplaygod.com/#yuphoria.34
Actually why don't you'll try out the forums on YUPLAYGOD....
They have ALL THE POSSIBLE LINKS THERE and everything is functioning properly including links to TWRP and the rooting etc etc...
And it is better to have TWRP installed to flash SUPERSU..
Cheers
Greg
great thanks you for sharing this method, definately i will try :good:
Great work ?
there is no option for new yuphria
Sent from my YU5010A using Tapatalk
i have a yuphoria which has stock android and i want to instal cm12.1 . When i tried to unlock oem it didnt wipe data
and im not able to boot or flash twrp
Pls help guys
RoyalBhati said:
Before anything please note to disable Driver Signature Verifications in Windows (Google how to disable them in whatever version of windows you are using).
Then download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
NOW THE PLAY BEGINS.....
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from [here ](http://forum.xda-developers.com/showthread.php?t=2588979)and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Download the TWRP file for the phone here(https://app.box.com/s/3e5ofvi9xtbadbysrp3ytkshl45k3shb) and paste the same on the ADB folder on your C drive.
Download the SuperSU zip file here(http://forum.xda-developers.com/showthread.php?t=1538053) and save on your phone internal SD card.
Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Click to expand...
Click to collapse
Can I flash the SU zip using adb?
Hi where can I find twrp for YU5010a ?
PS :- Is there any guide to root Yu010a ?
Root YU andriod 5.1.1
RoyalBhati said:
Many people were having problems in the detection of device...i have solved it
Click to expand...
Click to collapse
i have the problem to detect it
hi thanks for the post now i can root my yuphoria mobile thank you
guys i tried this method before coming to this website i did everything including unlocking bootloader but i could not launch twrp thingy on my phone ......any other method
that yu forums website is also same way
When i am input the command in the pc then he reply waiting for devices,
How to solve this problum??
Is there any way to root without unlock boot loader?
New Yuphoria 5010A with android no cyanogen , HELP
Hi
I have pruchased new Yuphoria 5010A with android os no cyanogen. I have tried all the methods to unlock oem and bootloader. I enabled allow oem unlock from developer options followed by using fastboot oem unlock method . ( fastboot does detect the device using fastboot devices" . but I get an error "remote em unlock not allowed" . Is there any fix for this. I would be grateful if you can help me .
Thank you
can't unlock the bootloader of yu5010a please help
I have followed the steps but its showing oem unlocking not allowed please help me
Temperory recovery
Sir can I temporarily boot into a custom recovery like twrp ...
And still have the stock recovery intact like hotboot .....
Someone told me doing hotboot saves ur ota updates ....
I have done this once and unlocked my bootloader and having stock recovery too.....
Twrp vanishes on reboot ....
Can this temporary recovery methods is good and can i use this same method to install xposed and make nandroid backup...
Thank you sir regards
Hi Everyone
I will show you how to unlock bootloader, install TWRP and ROOT on
ASUS Zenfone 3 Max 5.5 ZC553KL (X00D).
Before you remember to backup data carefully.
All needed files will be in this folder:
Please edit all the link to be form of google shorterner
goo. gl/xCAUAB
1. We downloaded two driver compression files on:
Adb: goo. gl/SBVPVG
Intel Android Driver: goo. gl/oYN7mG
2.Download this file:
goo. gl/5yA6yp
3. After you download all the necessary files, you unzip them all and start installing.
Run file adb-setup-1.4.2.exe to setup adb
Adb is now installed Intel Android Driver next next time as usual.
That is the driver. Now copy the two files (frp.BIN and twrp-3.1.1-0-X00D-20171020-5.img) into the C: \ adb folder.
4. Brother downloaded this file supersu and then copy to phone memory card.
goo. gl/jLmknM
5. Now start using adb to flashboot
After copying, we go to PowerShell (Admin) if using windows 10
You guys use win7 and 8 then run cmd with admin rights.
After open brother type the following commands in turn order:
cd C: \ adbadb reboot bootloader
The command to enter the bootloader, wait for the machine and then reset then type.
fastboot flash config frp.bin
Waitt for the copy to complete the command to reset.
fastboot reboot-bootloader
After resetting, type the following command:
fastboot oem unlock-go
Once done, type in the following command:
fastboot reboot
After the reboot finishes the power off.
Then press the volume key + before pressing the power button, wait for the screen, then release the power button to keep the volume + key to bootloader.
Please enter the order fastboot flash recovery
twrp-3.1.1-0-X00D-20171020-5.img
Wait for the file to finish typing the command below to enter the TWRP
fastboot oem reboot-recovery
After entering the TWRP, the brothers swipe the left "Swipe modified system".
Next select Install -> Select Storage under -> Micro SDCard -> OK
Youu will see the file SuperSU-V2.82.zip you just copied to the memory card.
Click on this file -> Swipe to Right Swipe to confirm Flash Finished, now sit back to finish running and reset the machine.
So is root finished.
Wishing you success.
LOL? You made this method yourself? I saw this in somewhere on this forum.
https://forum.xda-developers.com/zenfone-3/how-to/zenfone-3-max-zc553kl-bootloader-unlock-t3691837
After installing twrp recovery. Will my phone resets its phone data?
hello, i try to unlock bootloader and in adb when i type: fastboot flash config frp.bin it say error: cannot load 'frp.bin' : no such file or directory but 'frp.bin is in the same folder of adb i don't understand why it do this error i'm in fastboot mode i tryed de reboot my pc but it do the same error can you help me please thanks a lot!!
Does this method work on zenfone 3 max zc553kl with android 7.1.1? Thank you
is this tut is working for 7.1.1 version?
Revert to stock
How i can remove TWRP e revert to stock recovery ?
ZC553KL
hello its been a while is it available for Android 8.1?
Hello, I could not download the files. Could you please submit a new link? Thank you very much in advance.