Related
Butter Kernel
Presenting Butter kernel, a custom kernel built with many optimizations and tweaks. This kernel will work on Stock lollipop GPe devices. The main aim is to provide a stable kernel with optimizations and some features.
Custom Features:
- Updated to latest GPe Sources
- Bumped to 3.4.108
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- Various Other Build Optimizations
- Replaced Qcom's hotplug binary with mpdecision
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Simple GPU Algorithm
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Enabled FSync by default
- SELinux set to PERMISSIVE
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy![/B][/U]
I would like to thank @Flashhhh for this kernel. He has and promises to continue helping me with kernels. This wouldn't have been possible without him at all. Besides, I've also kanged commits from him (with his permission)
PLEASE DON'T MIRROR THE LINK
XDA:DevDB Information
Butter kernel for GPe 5.1, Kernel for the Moto G
Contributors
Aayushya, Flashhhh
Source Code: https://github.com/Aayushya/kernel-msm
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-01
Last Updated 2015-09-01
Reserved.
P.S: Looking for someone to make me a good banner to go with this Kernel. If interested, please PM me
Nice work
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Was it a single sim or dual one?
yeshwanthvshenoy said:
Was it a single sim or dual one?
Click to expand...
Click to collapse
Single sim.
iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Idem here!.
Well congrats on this new beauty. After long time i see faux stuff for official ROMs. lolz but you forgot to thanx faux for his hotplug
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
O that note...the battery is killing itself.
Waiting for a fix.
iDynamics said:
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
Click to expand...
Click to collapse
in synapse it appears. But some options do not appear as intellithermal
@Aayushya any updates to this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
About:
This Kernel is a port from the Z2/Z3/Z3C M5 Kernel based on the official CM12 kernel. It should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I'm mainly using PAC 5.1, and it's working sweet so far!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
CM Recovery not supported!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in your ROMs zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
Myself5 for making this kernel in the first place!
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
If I forgot you, please tell me.
To donate to Myself5:
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z2 Tablet
Contributors
Myself5
XDA:DevDB Information
M5 Kernel for Z2 Tablet, Kernel for the Sony Xperia Z2 Tablet
Contributors
rcstar6696, Myself5
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-11
Last Updated 2016-07-01
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
No Reply ? Whats wrong has anyone test the kernel ??
Enjoy it
I'm using it now on my tablet with the latest tesla build and it works great. Is this the kernel in your pac build?
Frostbiter said:
I'm using it now on my tablet with the latest tesla build and it works great. Is this the kernel in your pac build?
Click to expand...
Click to collapse
Yes PAC includs the M5 Kernel but you can use the kernel on all Cm based Roms
10.1 is up
Hey guys, I managed to find some free time, and finally compiled and uploaded a 10.1 Build. Basically it only includes CM Upstream commits (about 200 of them), and should work flawless with the newest CM builds, I am running it with the OFFICIAL 20151016 release of Carbon ROM on my Z3 here (excuse me, but some advertisement needs to be placed ). I hope you enjoy it
Regards
Installed it on CM 12.1 first look runs smoothly and quick
V10.2
Hey guys,
V10.2 is currently compiling, you can check the progress here: http://myself5.de:12345/job/M5Kernel All Devices/
It's basically a bug/derpfix build, but also added some new under the hood changes.
Changelog:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Regards
Myself5 said:
V10.2 is currently compiling, you can check the progress here:
Click to expand...
Click to collapse
Playing around with the kernel on CM
Looks like smooth and stable
Want to change CPU govenour with tasker from Wheatley to elementalx when playing special games.
Tasker says he can set on CPU 0 and 1 the govenour, but not on CPU 2 and three. There is no govenour selection on CPU 1 and 2 avaiable in Tasker
I give my the answer myself
Kernel Audiotor have Tasker plugin support..so its much easyer with this and it works
@rcstar6696
Any chance of a new kernel based on Sony 23.4.A.1.200/23.4.A.4.6
http://review.cyanogenmod.org/#/c/128679/
V11 is compiling
Hey folks,
I just started the build of V11. It contains considerably most of the changes done till now, @tomascus did a very good work with that. He merged Linux Kernel upstream up to 3.4.111, which is the newest 3.4 Kernel available. We ofc also merged the CM upstream, and tomascus also merged some improvements to f2fs and zRAM. In addition to that Eyenseo fixed the static noise on highend headphones. In addition to that, I'd like to welcome Eyenseo and tomascus to the team, they will maintain the Z2 (as I sold mine recently) and tomascus, who will maintain the Z1 (we were looking for a Z1 maintainer since quite a while).
Furthermore, we'd like to announce that this might be the last 3.4 M5 Kernel build (unless we find some time to keep it updated for LP). The reason is: M will use the Sony AOSP trees and the 3.10 Kernel. Hence we are going to start working on a 3.10 based M5 Kernel as soon as we can, in order to be ready once M builds are released. (Which should be soon)
You can see the current build progress here: http://myself5.de:12345/job/M5Kernel All Devices/
Changelog Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Myself5 said:
Hey folks,
I just started the build of V11.
Click to expand...
Click to collapse
Just wanted to say: great kernel and thank you for your hard work.
Just got a Z2 and immediately switched to CM12.1 along with your kernel and the smoothness and battery life are great!
Sent from my Xperia Z2 Tablet LTE using Tapatalk
Just a simple question, when deciding which cpu hotplug plugin to choose, do I leave MPdecision always on? It seems like MPdecision alone does not work as a cpu hotplug(4 cores always connected) and other plugins seems to have some kinda dependencies on MPdecision plugin. I would much prefer to use MPdecision alone, but it seems like I have to turn on intelliplug or MSM mpdecision to make hotpluging work.
DDz_1888 said:
Just a simple question, when deciding which cpu hotplug plugin to choose, do I leave MPdecision always on?
Click to expand...
Click to collapse
Only enable one hotplug method...do you enable two or three it is become buggy
Bastlwastl2010 said:
Only enable one hotplug method...do you enable two or three it is become buggy
Click to expand...
Click to collapse
then MPdecision seems to be broken, it never will unplug idling cores. 4 cores are always online.
DDz_1888 said:
then MPdecision seems to be broken, it never will unplug idling cores. 4 cores are always online.
Click to expand...
Click to collapse
Nonessential....
There are different meanings in idle cores while display on, because bring back cores online cost energy.
A good explanation is here, from the author of elementalx:
http://elementalx.org/the-truth-about-kernels-and-battery-life/
V11.1 is coming
Hey folks
After various reports on different devices, we reverted our sound changes for the static noise with headsets. It seemed to cause more issues than it was fixing.
Therefore, our changelog for 11.1 is quite small.
Changelog:
Fix sound again by reverting the previous sound fixes
As always, the build progress can be seen here: http://myself5.de:12345/job/M5Kernel All Devices/
V11.2 is out
Hey Folks,
As some of you know, my Server died recently, including all the data on it. I thankfully meanwhile found a Backup from the 21st of December 2015, but that means that the V11.x builds are gone. Thanks to the community, we got some of the newer builds back, however not all of them (some devices miss V11.1-Permissive for example), which is why I decided to start a new (11.2) build after finish to setup my server. That is now. I also updated the changelog for 11.2, stating it is what it is. A rebuild of 11.1.
Thanks for your patience and lot for the builds you guys had uploaded during the Server downtimes.
Regards,
Hey, thnk you for your work!... But all links are down;( maybee some guys will upload it? Thx
---------- Post added at 05:47 PM ---------- Previous post was at 05:46 PM ----------
Hey, thnk you for your work!... But all links are down;( maybee some guys will upload it? Thx
This Project is officially dead... If you wish to stay with my work, please consider to use SmartPack kernel which can be found here... Thanks to all of you for your supports...
/* Introduction */
This is an unofficial port of the well known Boeffla-Kernel which is developed by the recognized developer @Lord Boeffla. I build this kernel for my personal use in my Korean galaxy S5 (kltekor) with some minor modifications. With the permission of the original developer, here I decided to share my unofficial builds for anyone interested. Please do not bother the original developer with bug reports and update requests. Always remember that this is an unofficial port.
Code:
DISCLAIMER!!
I am not responsible for any damage to your device. Everything you are doing on your device is on your own risk.
I only own kltelgt (SM-G900L). Hence, all the kernels published in this thread are only tested on kltelgt by myself although it should work on klteskt and kltektt.
Please note that flashing any custom Kernel including mine will void your warranty.
/* Compatibility */
This kernel is only compatible with kltekor (SM-G900K/L/S) running AOSP/Lineage-OS based Nougat ROMs.
/* Features */
Build using Linaro gcc 4.9 toolchain.
Linux Kernel version is updated to 3.4.111
Full integration with Boeffla-Config V2 (download link)
All the standard features of Boeffla-Kernel
Support of anykernel concept - flash stock kernel before flashing Boeffla
Additional governors: zzmoove (Note: not considered stable at the moment, you might face reboots!!!), intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, nightmare, lionheart, pegasusq
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Wake up gestures implemented (double-tap-to-wake, swipe to wake)
Boeffla-Sound engine (Headphones and speaker volume configurable)
Configurable vnswap
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency configurable, touch boost switch
CPU Overclocking up to 2.84 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support
Show GPU frequency usage per frequency in Boeffla-Config
Color control to adjust RGB color space + inverted mode
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported (default is off)
Android logger (logcat) configurable
Kernel logger (dmesg) configurable
Charge rates for AC charger, USB and wireless charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support (module, do not mount inside /data)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Swap supported (but not recommended, use zRam instead)
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Insecure kernel (adb has root privileges)
Automatic EFS backup
Kernel survival mode by Boeffla-Config app to survive CM rom flashes
Full support for mpdecision for best compatibility and smoothness
(Important: use Boeffla-Config to configure min/max CPU frequencies + governors + schedulers only - or explicitely allow other apps/processes to overwrite this in Boeffla-Config settings, but expect weird side effects)
Integrated full busybox 1.23.1 (own compilation)
Auto-Root by kernel possible by request, not recommended for CM however (latest su included)
Kernel initialization log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Always using latest Initramfs
Always based on latest Galaxy S5 sm-g900f kernel sources by CM
Kernel runs with SELinux enforcing by default, just as CM12 stock kernel for S5 - but can be configured to work in permissive mode in Boeffla-Config settings
It is highly probable that I missed some features while building. Please let me know if you can't find some features that are listed above.
/* Downloads */
Code:
[B][COLOR="blue"]Please make sure to download the latest build[/COLOR][/B]
kltekor
/* How to */
1. Go to recovery (TWRP recommend)
2. Flash Kernel
3. Wipe Cache/Dalvik Cache
4. Reboot and enjoy
/* Special note to Korean S5 users */
Flashing this kernel after AOSP/LOS based nougat ROMs originally build for the klte (SM-G900F) variant will allows the use of those ROMs on SM-G900S/K/L.
/* Change-logs */
9. August 02, 2017
Changes: All the commits in the LOS source code till dat. Improved zzmoove stability by disabling thermal support (credits to ZaneZam). Kernel configuration and compiler flags changed to switch off kernel size optimization (in favor of speed: credits: Lord Boeffla)
8. July 28, 2017
Recent LOS commits till date
7. July 12, 2017
Recent LOS commits till date
6. July 5, 2017
Linux Kernel version is updated to 3.4.113.
5. June 24, 2017
Updated to latest source (G900FXXU1CQE1) released by Samsung. Thanks to LOS team and @haggertk
4. June 20, 2017
Recent LOS commits till date
3. June 13, 2017
Linux kernel version updated to 3.4.113 seems to make some issues (mainly with chrome browser) and is reverted (Now it's 3.4.113).
2. June 8, 2017
Recent LOS commits till date
1. June 4, 2017
Initial release
/* Donation */
For those who wish to donate to the original developer, here I'm copying his own words.
Code:
If you like my work, feel free to donate: [URL="http://www.boeffla.de/index.php/donation"]Donation-Link[/URL]
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
/* Acknowledgements */
Lord Boeffla for the original Boeffla-Kernel
Haggertk for LineageOS 14.X for Galaxy S5
osm0sis for AnyKernel project
Our Korean Galaxy S5 Facebook group members
XDA:DevDB Information
Boeffla-Kernel, Kernel for the Samsung Galaxy S5
Contributors
sunilpaulmathew, Lord Boeffla
Source Code: https://github.com/SmartPack/
Kernel Special Features:
Version Information
Status: No Longer Updated
Created 2017-06-03
Last Updated 2017-09-21
Reserved
will try this on my G900K ,
Btw sunilpaulmathew can this flash on the G906S/K/L?
Thank you
chow9229 said:
will try this on my G900K ,
Btw sunilpaulmathew can this flash on the G906S/K/L?
Thank you
Click to expand...
Click to collapse
No friend. As I wrote in the op, it only works on SM-G900K/L/S.
Sunil, just booted up with this kernel. Everything seems to work. I'll test it for a while and let you know if I run into anything. Flashed over your latest lite kernel that works very well.
thaidroid said:
Sunil, just booted up with this kernel. Everything seems to work. I'll test it for a while and let you know if I run into anything. Flashed over your latest lite kernel that works very well.
Click to expand...
Click to collapse
Thank you very much for testing... I'm pretty sure that you will be happy with Boeffla sound engine, though I have no idea abt your other preferences
First impression, very smooth
---------- Post added at 05:30 PM ---------- Previous post was at 04:56 PM ----------
Be careful with speaker Level Its not the same as recording level in smartpack. I set it to 15 and almost blew the speakers and my eardrums
Actually Recording level is missing and that WAS the culprit when using Skype, WAS.... because in the latest builds Skype over speaker has been fine.
Sunlight, used the kernel for two days and no problems. Gone back to SP Lite this morning. Not sure but I think SP might be using less battery. Both are similar for speed and smoothness I think. No benchmarks I don't use them:cyclops:
SunlightI guess the spellchecker just gave you a new nickname:laugh:
New build with latest LOS commits are available here...
/* Downloads */
Code:
[B][COLOR="blue"]Please make sure to download the latest build[/COLOR][/B]
kltekor
Will try it over night to see how it sleeps
Thanks for doing this, never thought I'd have Boeffla on my kltekor.
thaidroid said:
Will try it over night to see how it sleeps
Click to expand...
Click to collapse
Sorry, I forget to tell, I pushed one more build (and replaced the old one) since I found few more commits in the LOS source code later...
lexxx84 said:
Thanks for doing this, never thought I'd have Boeffla on my kltekor.
Click to expand...
Click to collapse
All the credits to @Lord Boeffla for making this awesome kernel as well as allowing me to share my port
New build...
New build is uploaded. The source is merged with Samsung's latest opensource release (special thanks to @haggertk and Lineage-OS team)
/* Downloads */
kltekor
[new builds will be uploaded for anyone interested once in a week (on or before Thursday) only if LordBoeffla or Lineage OS team made any change in their klte source code]
New build...
Changes: all the commits in the LOS source code till date...
/* Downloads */
kltekor
Blackburn119 said:
Hello please kindly update your boeffla unofficial kernel, 12072017 version came with camera bug.
Click to expand...
Click to collapse
Camera issue will be hopefully fixed in this build...
New builds...
Changes: All the commits in the LOS source code till dat. Improved zzmoove stability by disabling thermal support (credits to ZaneZam). Kernel configuration and compiler flags changed to switch off kernel size optimization (in favor of speed: credits: Lord Boeffla)
/* Downloads */
kltekor
Big update...
The changes includes...
Updated with latest official LineageOS kernel commits till date (Note: This was a complete kernel rebase by LineageOS team = in worst case expect some bugs.) Improved safetynet handling (credits to SultanXDA)
All the credits to LineageOS team, Lord Boeffla and SultanXDA...
Download links are here... enjoy...
/* Downloads */
kltekor
Detele this
I have no issues with this kernal using 900P/Kltedv formally kltespr
sunilpaulmathew said:
The changes includes...
Updated with latest official LineageOS kernel commits till date (Note: This was a complete kernel rebase by LineageOS team = in worst case expect some bugs.) Improved safetynet handling (credits to SultanXDA)
All the credits to LineageOS team, Lord Boeffla and SultanXDA...
Download links are here... enjoy...
/* Downloads */
kltekor
Click to expand...
Click to collapse
how about gaming?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dorimanx UNIFIED! (OP3+OP3T) Kernel for STOCK 7.1.1 OOS/H2OS 4.1.6+7+4.5.1 + BETA!
NO > Oxygen 3.x.x or CM/LineAge/OREO BETA SUPPORT!!! GO AWAY NOW!
My PM box, is for Emergency ONLY! do not send me PM's just because you cant post! that is lame, post something useful and post in thread.
My kernel was based on OP3 Stock Kernel 4.5.1 + BETA 15/24 Source.
Kernel Tree is 3.18.84, + OP3 and CAF updates + my tweaks and lots of tuning!
Global Credits!
Flar2 for many kernel mods
Cyanogen/LineAge/Code Aurora for many kernel mods
Andip71
Franciscofranco
SultanXDA
OP3 Devs for Stock kernel base!
To all my sources in GITHUB!
Linus Torvalds for Linux source!
WHAT INSIDE:
Kernel support OOS/H2OS 4.1.x/4.5.x
Kernel compiled with Linaro GCC 7.1.1 Android Bionic 64Bit adapted for OP3
Kernel includes all new security patches.
Kernel updated up to 3.18.84 build.
Kernel includes all original last 7.1.1 changes by OP3 Devs.
Kernel operate in 300HZ + all needed fixes to do that.
Kernel has DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Kernel support charging up to 2500ma with any charger! stock locked to 1500ma
Kernel has swipe to wake features by @FLAR2 (up,down,right,left,and dual tap).
Kernel include Sweep2Sleep allows sweeping from right to left and backwards!
on soft buttons to turn off the screen. by @FLAR2
Kernel has support for screen color change app. (KCAL Interface).
Kernel has support for touch keys light delay, default 6sec. by @andip71
Kernel include KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
Kernel include all latest patches from Code Aurora source for 3.18.y
Kernel include Enhanced TCP methods
Kernel include IPA/TIMERFD/WIFI/NETLINK wakelocks removal code by @franciscofranco
Kernel include open source QUALCOMM Wi-Fi driver updated to max without debugs.
Kernel include advanced binder driver from main line 4.10.y kernel.
Kernel include CDROM emulation on mass_storage (compatible with DriveDroid 0.10.18+)
Kernel include latest F2FS driver for 3.18.y with fixes for speed and stability.
Kernel include ZEN,NOOP,BFQ,DEADLINE,CFQ,FIOPS,SIO I/O govs tuned for SSD.
Kernel includes Elementalx, Blu_active, Interactive, Conservative, Ondemand, Performance CPU GOVS.
Kernel support FSYNC mode for FS. (Off by default)
Kernel includes ARM enhanced performance and battery patches
Kernel support Backlight Dimmer feature.
Kernel supports CPU OverClock/UnderClock for both clusters.
Kernel support thermal driver tuning, max heat for cores.
Kernel includes advanced crypto drivers and latest qseecom decryption driver.
Kernel includes updated EXFAT and FUSE + NTFS drivers.
Kernel support for not forcing encryption and verity checks.
Kernel includes support for CIFS driver.
Kernel includes fast finger print sensor mod when screen is off.
Kernel includes support for Haptic Feedback (vibrate) tuning (more/less)
Kernel includes massive code update for sound driver, and @FLAR2 sound/mic gain control interface.
Kernel include boost to I/O by mounting partitions with optimized flags, and updated MMC driver.
Kernel includes updated BT and NET/PPP/VPN/DATA drivers.
Kernel include mode to ignore home and touch keys when finger is pressed against the screen.
Kernel includes Aroma Installer for easy install with few simple changes that can be selected.
Kernel includes many patches to camera, GPU, and screen drivers.
Kernel has OTG enabled by default internally.
Kernel has Notification LED Control driver by @andip71
Kernel include usage of power efficient workqueues in many drivers by @franciscofranco
Added Support For INIT.D Scripts see /data/init.d folder
Kernel will switch to NOOP I/O Sched during screen Off time to save power. by @SultanXDA
Kernel will boost CPU frequency when screen wakeup to improve user experience, by @SultanXDA
Kernel will set max allowed apps in RAM to 60 from 32
Kernel will add advanced busybox binary in /sbin/busybox for advanced users and my scripts
Known BUGS!
Post reports, i will fix.
Standard disclaimer:
By installing this kernel YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to install it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
But you can feel SAFE to use it, as I test every release on my phone!
Before I publish it for download.
Your warranty will be void by installing custom kernel as my.
Kernel Sources:
KERNEL GITHUB
TO DOWNLOAD GO DOWN!!! YES MORE DOWN...(do i need to repeat?)
How To Install:
You will need to have device with Latest Recovery installed! Please install the 3.1.1.x BUILD!
>>>Here is the Recovery you need!<<<
Recovery is Unified with OP3 + OP3T no problem to install.
Old recovery can corrupt your DATA partition as my kernel using latest F2FS driver. new recovery has updated driver.
YOU MUST UNLOCK OEM BOOTLOADER!!! OR YOU WILL BE STUCK ON BOOT!
Refer to other threads for recovery install process and for oem bootloader unlock.
Download kernel, upload it to your SDCARD, anywhere.
Always have STOCK Kernel for your ROM!
Reboot to Recovery.
THINK AGAIN! did you made backup? NO!!!!??? DO IT NOW!
If you had any other Custom kernel, Install STOCK kernel or dirty flash your ROM,
to clean any trace from other kernel. then install ROOT/Magisk if you wish! then install my kernel ALWAYS THE LAST.
Do not clean any cache or dalvik (needed for ROM only!).
Reboot!
If you wish to UNINSTALL my kernel, there is a uninstaller ZIP for you.
it's will remove all ramdisk changes, and install last 4.1.6 stock kernel, preserving ROOT if was installed!
Have Fun and report.
Honored Fearless BETA Testers! without them i would be lost in dark kernel space:
dimberr
Diechel
misterepicwin
vampire36
RyperX
siggey
bipinbedi
Chris7
Leicxan
Radon94
Donation Board:
ME donated 150+ hours to update stock to now.
Dimberr HUGE Donation!
Betadr X2
Diechel
RyperX
Misterepicwin
Cultofluna
Andrej666
Aagato86
Thread Rules:
This is a Kernel development thread ONLY.
Allowed:
1) Any kernel reports with LOGS in case of crash from /sys/fs/pstore/console file.
2)Any satisfaction reports with picks and suggestions about kernel.
3)Any questions related KERNEL.
4)Any important information that may improve this kernel.
5)Any issues you have with STOCK Stable ROM. this what i use and test, all the rest are BONUS.
6)Sound mods and root access. i think it's good information that can improve user experience with my kernel.
Not Allowed:
1) extreme off topic about some ROM mods, APPS, Magisk non ROOT modules,
2)Comparing kernels, other vs other, my vs other.
3)Trolling!, Spamming, hate toward other users, flaming, feeding trolls. posting not in English, NOOB calling other users.
4)Disrespect of any beta tester listed in OP.
All recognized developers Allowed to manage there own threads without bothering forum administrators.
I can, and I will, remove all not allowed posts without blinking.
Mirror #1 by willflint
Mirror #2 by GITHUB!
Info for Web Hackers,
in my mirrors, there is nothing to take!
My work is public and for the people!
Please let my mirrors work in peace.
Thanks.
Please consider supporting my work by tipping
BTC
19FMaiTe5kbNJZwhtYjaAc8p8Q9oZhCjB1
Dash
XkNoDjdq84rq7JunR5q8b3hubx9FTsvY25
Litecoin
Lb6LxPTJ1BxWg78zsNEnAgv5JdC4JgzLPL
Ether
0x2BABf64cb03656f645516A4cA666719b1af4Ac4F
Dogecoin
DAtytL65sy9vuvYh1T7vuKaaaJoKaNHubh
Monero
44vY3x5nBqCRfZdVwLtAgjbzUfnnEevd54yyCzsM4HzFfZEXH36e1WYD9RKRKUmT5SW46Ytkp1bnVZqhySeQFh99C4iivgB
Aeon
Wmt8gnhjtQeefUfmVkUj6EHD14XK9crU2dej2EPsGn3JSrLMcSkDytnJDBTeg3muD3Z3Hsc9CSNxFKpRFcpKW7k92urmTd1yB
There is Kernel OTA APP that will auto download and install kernel via TWRP!
>>>>>>Kernel OTA APP<<<<<<
Mirror #2
Change logs:
28/11/17
Kernel 3.2 Stable
*Merged patches 3.18.80+81+82+83+84!
Including: ARM64,BLOCK,I2C,FS,LIB,SECURITY,SOUND,TTY,USB,
*Merged latest F2FS driver updates from source.
*Merged many updates to BINDER code for CAF source.
*Merged mods to touch screen driver by sultanxda, great work for optimization and power save.
*Merged new updates from CM14 including: MDSS,VIDC,
DIAG,CRYPTO,NET,ADSPRPC,SCSI,SOUND,POWER,IPA,MMC,LOCKING core.
*Merged latest WIFI driver updates. ver 06300
08/11/17
Kernel 3.1 Stable
*Merged main stream patches 3.18.74 to 3.18.79
Including: BLOCK,CRYPTO,MMC,NET,TTY,USB,FS,BASE,SECURITY,HID,IOMMU,SOUND,KERNEL CORE,I2C,LIB,SCSI.
Tons of changes! it's 400 commits compressed to patches.
*Merged optimizations to BINDER code from CAF.
*Merged Camera,MMC,KGSL,SOUND,IPA,MDSS,DIAG,QCOM,USB,FS updates from CAF.
*Merged latest Qualcom WIFI driver v06100
06/10/17
Kernel 3.0 Stable
*Reverted changes to SDCARDFS to get rid of bug with folders in storage.
Beta team reporting that all good now.
*Merged patches 3.18.72+73 including:
BLOCK,NET,PCI,SCSI,TRACE,ARM64,FS,SECURITY fixes.
*Merged BINDER updates from CAF and Mainline kernel.
*Merged wakelocks shut when drivers shift operations, by franciscofranco
26/09/17
Kernel 2.9 Stable
*Merged AOSP and CAF updates including:
FS,BlueTooth,Trace,DIAG,Thermal,ASOC,CAMERA,MDSS,
QSEECOM,KGSL,IPA,SOUND,ARM64,TIME,BINDER,NET,
QCOM,SDHCI,USB.
*Merged patch 3.18.71 including:
SCSI,USB,FS,Kernel Core,MM.
*Merged OP3 Dev BETA OBT24+OBT15 color updates.
*Merged latest WIFI driver updates.
*Merged massive update to F2FS from 4.14.y kernel
*Merged latest updates to SDCARDFS from CAF and AOSP.
*Merged latest OEM OP3 4.5.0 kernel updates.
09/09/17
Kernel 2.8 Stable
*Merged OP3/T BETA branch OBT23+OBT14
It's updates to colors switch Srgb and nightmode.
*Merged main line update 3.18.68+69+70!
Many changes to: FS,Kernel Core,NET,BT,SOUND,ARM64,SCSI,LIB,MM
*Merged updates to BINDER CORE from Aosp and main line source.
*Merged updates to F2FS driver.
28/08/17
Kernel 2.7 Stable
*Added busybox mount function to help with working with /system folder.
*Merged latest patches from CAF and AOSP including:
CPUFREQ,DIAG,LOCKS,USB,CAMERA,SOC,NET,KGSL,SOUND,I PA,WIFI updates.
*Merged 3.18.67 patch including: NET,SCHED,Kernel CORE,MM,SOUND updates.
*Fixed selinux not enforced if Magisk installed on EXT4 Data partition!
23/08/17
Kernel 2.6 Stable
*Merged patches 3.18.64 to 3.18.66
Including many many updates to all core drivers and functions.
See GIT if you like to dig in too code changes.
*Merged many updates from CAF and AOSP branches for our device.
*Merged latest OEM OP3/T 4.1.7 update to kernel. (will work just fine with 4.1.6 and BETA too)
*Added new STOCK 4.1.7 kernel to mirror, and new uninstall zip including 4.1.7 stock kernel.
to install this build on 4.1.7 ROM! make sure you had 4.1.7 stock kernel to get all ramdisk updates by OP3!
06/08/17
Kernel 2.5 Stable
*Merged CAF updates including:
ISP,CAMERA,MDSS,IPA,MMC,USB,KGSL,ION,NET,SOUND,PERF,INPUT,REGULATORS
*Fixed ROM dev ram access to used RAM by apps, no longer show 0B
*Merged updates to F2FS driver from Android dev list.
*Merged OP3 Devs BETA 12 update that focused on color update for night mode.
*Updated Busybox from source.
31/07/17
Kernel 2.4 Stable
*Merged fix for low CPU frequency after deep sleep for short delay.
*Merged Patch 3.18.62 including: CRYPTO,TTY,FS,KERNEL CORE,MM,NET updates/fixes.
*Merged update for F2FS driver from source.
*Merged update to BINDER driver from CAF big improvement in code structure and functions.
Binder is directly responsible in running apps and services, memory allocator.
*Merged patch for android-verity mount check.
*Merged new code that will shrink and compact RAM each time screen goes off after 3sec.
And only once in 15min! This will help to have always fresh and fast device. For very long time of use 150hours+
*Merged fix for QCOM driver to prevent possible memory leak.
*Merged patch 3.18.63 including: POWER DOMAIN,OF,SPMI,PCI,USB,FS,KERNEL CORE,NET, BT+NFC,SOUND.
*Merged new update to WIFI driver LA.UM.5.5.r1-05400-8x96.0 open source perfect module!
*Merged massive fix by Awesome DEV @SultanXDA for debug fs code.
*Compiled new Linaro GCC 7.1.1 = new libs and Android Bionic Core, first time such thing was possible!
And compiled Kernel with this massive native android toolchain!
Noticeable speed and global stability feeling!
My BETA team is impressed! 3 days no words in our discord channel hehehe
*Updated Busybox 1.28.0 from source using GCC Linaro 7.1.1
Now it's possible to use OTA Kernel Update App by @Diechel
It's will auto download kernel, install it via TWRP, and show you the change log
Really cool thing! it's donation app. 1$ feel free to donate, or use the website as before
>>> https://play.google.com/store/apps/details?id=com.diechel.xda.dorimanxota3t.pro <<<
16/07/17
Kernel 2.3 Stable
*Merged latest update to F2FS driver from source. sync with 4.13.y tree.
*Merged fix for min sched windows when kernel using 300HZ.
*Merged CAF patch to fix bugs and security issues in:
CAMERA,MDSS,USB,ADSP,CHARGER,IPA,QCOM,NFC,QCDEV,SOUND
*Merged latest WIFI opensource update LA.UM.5.5.r1-05300-8x96.0
*Merged mods to WIFI driver to reduce battery usage.
*Merged mainline patch 3.18.61 including:
NET,USB,IPC,TRACE,SECURITY
*Merged mod to boost CPU freqs after suspend on wakeup.
*Added SeLinux mode changer in Aroma Installer.
You can set Enforce or Permissive. no apps/magisk modules needed!
*Updated Uninstaller to include selinux mods cleanup.
*Added mount command to be linked to busybox, so apps can remount system and root.
If they are allowed to use ROOT.
09/07/17
Kernel 2.2 Stable
*Merged kernel updates 3.18.59 + 3.18.60
Including USB,FS,Kernel Core,LIB,NET,IOMMU,MM
*Set to deny access from perfd ROM service that can brake CPU gov tuning.
*Tuned Interactive GOV on boot for both cluster,
To deliver great Performance and balanced battery save.
*Tuned Blue_Active Gov default tuning.
*Fixed init.d support from /data/init.d/
*Updated busybox to 1.28.0 made with Linaro gcc 7.1.1 64Bit
*Merged many updates from CAF source for our soc.
Including MDSS,CAMERA,IPA,VIDC,INPUT,QCOM,USB,DIAG,SCHED
*Updated WIFI driver to latest opensource LA.UM.5.5.r1-05100-8x96.0
*Fixed my boot script load on boot to allow better tuning of kernel.
*Fixed not working touch when screen is in half wake state. (liftup, wave gesture)
*Added new driver to allow to limit max freq on both clusters so no other app
or ROM service can set higher. for now not used! and not forced.
I will add controls for it in my app.
*Merged updates to F2FS driver from main source.
*Updated new GCC Linaro 7.1.1 kernel builder 64Bit and made kernel with it.
*Added new controls for CHARGING LIMIT in Aroma installer.
You can set max allowed charge back to 1500ma if you wish!
28/06/17
Kernel 2.1 Stable
*Merged 3.18.58 patch including RAM,USB,NET,FS updates.
*Added overclocking for OP3 Model, one step higher for both clusters, not used by default!
25/06/17
Kernel 2.0 MEGA BOMB Build
Kernel will work with BETA STOCK ROMS!
Including All the in WHAT INSIDE LIST
Tested for long time by fearless beta testers!
And crowned as STABLE.
=============================
XDA:DevDB Information
[KERNEL] Dorimanx V3.2 OP3/T Nougat 7.1.1 STOCK 4.5.1 Tree 3.18.84 [28 NOV] PWR CORE, Kernel for the OnePlus 3
Contributors
dorimanx, dimberr, Diechel, misterepicwin, vampire36, RyperX, siggey, bipinbedi, Chris7, Leicxan, Radon94
Source Code: https://github.com/dorimanx/DORIMANX-OP3T-KERNEL/commits/master_7.x.x
Kernel Special Features: See What Inside list.
Version Information
Status: Stable
Current Stable Version: 3.2
Stable Release Date: 2017-11-28
Created 2017-06-26
Last Updated 2017-11-28
One for me
And one more for me
Happy to see you here
Sent from my OnePlus 3T using XDA Labs
Master dorimanx is here
Hmm definitely interesting stuff right here and finally its unified! It was only for 3T AFAIK since it was posted at 3T thread only
Sorry but there is no cpu overclock, the gpu min isn't 100mhz
FinallY!!!
@dorimanx Dori....welcome here on the OP3. Great going.
The subject title is mentioning the OP3 but the github folder says OP3T...can I request you to correct and modify please ...thanks mate
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
halleyrokz said:
Sorry but there is no cpu overclock, the gpu min isn't 100mhz
Click to expand...
Click to collapse
no oc but gpu min is 100mhz
SREEPRAJAY said:
@dorimanx Dori....welcome here on the OP3. Great going.
The subject title is mentioning the OP3 but the github folder says OP3T...can I request you to correct and modify please ...thanks mate
Click to expand...
Click to collapse
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
plhip47 said:
no oc but gpu min is 100mhz
Click to expand...
Click to collapse
Overclock was not tested on OP3 so for now its stock freqs.
Reminder, i have the op3t
I will find beta tester to help me test this.
dorimanx said:
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
Click to expand...
Click to collapse
Of course you are the boss...but the word "unified" will make things even more clear...cause you never know if there is a question coming sooner or later...[emoji14]
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
Wow lord Dorimanx!!! Welcome for some OP3 / 3T love !!! Nice to see you here
OB18 op3, buttery smooth. [emoji109]
Sent from my ONEPLUS A3003 using Tapatalk
Just installed it, on latest FreedomOS Stable, and it's smooth af !
Thanks Dorimanx ^^
dorimanx said:
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
Click to expand...
Click to collapse
+1 One and only Dori
Sent from my LG-H815 using Tapatalk
goran_oh said:
+1 One and only Dori
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I have added the UNIFIED on main page... i hope it's will not confuse people, if OK or not to install.
the MM kernel is a mess, but N kernel is much more solid and merged for both models.
Also i have added thread rules, that not really different from XDA global rules, Please ALL... respect the rules.
other wise... there will be some overtime cleaning for me to do :silly:
And we have here well known, and respected forum moderator using OP3
First full(98%) charge. Wow
Sent from my ONEPLUS A3003 using Tapatalk
Imotep95 said:
First full(98%) charge. Wow
View attachment 4194781
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
looking good, expected screen on time is 6 hours with normal moderate usage. (no heavy games that use full power)
My record is 7 hours and 20min. no games. just usual things like : calls, xda labs, whatsup, discord, instagram, face, music(screen off), and other apps.
still every user can get different results. all depend on usage and control of apps that drain power without you want that.
Frugal Kernel for Lenovo A6000/Plus
Features:
Intense Battery Backup Optimization
performance Tweaks
zram tweakes (Smart Pack) profile
Wake Gesture (DoubleTap2Wake + Sweep2Wake)
CPU Governors: alucard ,ondemand ,darknessV5 ,impulse.
Hotplugs: IntelliPlug, MSM Hotplug.
Instruction:
Download Frugal Kernel and save to sdcard
Reboot to TWRP recovery
Make A backup for your boot partition
Install Frugal Kernel
Reboot
install (Smart Pack) from store import profile attached , apply it on boot
Credits:
dev_harsh1998
showp1984
Vineeth Raj
premaca
franco
faux123
myfluxi
ED300
many more
Issues:
screen flicker at first boot only - it will removed after screen goes off and on-
wake gestures turn off automatically after you turn on flash or camera -make sure to turn it on from (Smart Pack) not from settings
Source code:
Kernel: kernel_lenovo_msm8916
Good afternoon @Dude66, if this is just a barebone build from my codebase then the kernel link which you have mentioned is fine if not then please update the kernel source link with correct source code with your edits.
dev_harsh1998 said:
Good afternoon @Dude66, if this is just a barebone build from my codebase then the kernel link which you have mentioned is fine if not then please update the kernel source link with correct source code with your edits.
Click to expand...
Click to collapse
hi dev_harsh1998
its your code but i add some patches on it
i will add link for the exact source after sync it withe mine on pc withe github
thanks for the advice