Hey there XDA, I have a strange problem. Maybe you can help me out.
I just got my Moto G today and after unlocking the bootloader, the first thing I did was flash TWRP (fastboot flash recovery TWRP-2.7.0.0-falcon.img).
I did this with the normal fastboot from the Android SDK, not the Motorola version.
Now everytime I start the device, it always boots right into recovery. Always. Doesn't matter if there's TWRP, CWM or Stock installed.
I also flashed the device to GPE afterwards (using the Motorola fastboot) which should've erased everything, but it still does it.
The only way I can get into the actual system is by flashing the normal boot.img as recovery (fastboot flash recovery boot.img).
Can someone please shed some light on this for me? I'd be eternally grateful.
Thanks in advance.
Kenny
twofive said:
Hey there XDA, I have a strange problem. Maybe you can help me out.
I just got my Moto G today and after unlocking the bootloader, the first thing I did was flash TWRP (fastboot flash recovery TWRP-2.7.0.0-falcon.img).
I did this with the normal fastboot from the Android SDK, not the Motorola version.
Now everytime I start the device, it always boots right into recovery. Always. Doesn't matter if there's TWRP, CWM or Stock installed.
I also flashed the device to GPE afterwards (using the Motorola fastboot) which should've erased everything, but it still does it.
The only way I can get into the actual system is by flashing the normal boot.img as recovery (fastboot flash recovery boot.img).
Can someone please shed some light on this for me? I'd be eternally grateful.
Thanks in advance.
Kenny
Click to expand...
Click to collapse
on the custom recovery menu screen, when you press REBOOT then REBOOT SYSTEM, does it? Or does it just reboot back into recovery?
3RAN7ON said:
on the custom recovery menu screen, when you press REBOOT then REBOOT SYSTEM, does it? Or does it just reboot back into recovery?
Click to expand...
Click to collapse
It boots right back into Recovery. It always does that, no matter if I do it from the OS, the bootloader, whatever.
Have you tried flashing through fastboot the update for your device ?
twofive said:
Hey there XDA, I have a strange problem. Maybe you can help me out.
I just got my Moto G today and after unlocking the bootloader, the first thing I did was flash TWRP (fastboot flash recovery TWRP-2.7.0.0-falcon.img).
I did this with the normal fastboot from the Android SDK, not the Motorola version.
Now everytime I start the device, it always boots right into recovery. Always. Doesn't matter if there's TWRP, CWM or Stock installed.
I also flashed the device to GPE afterwards (using the Motorola fastboot) which should've erased everything, but it still does it.
The only way I can get into the actual system is by flashing the normal boot.img as recovery (fastboot flash recovery boot.img).
Can someone please shed some light on this for me? I'd be eternally grateful.
Thanks in advance.
Kenny
Click to expand...
Click to collapse
You could try re flashing the stock firmware. http://forum.xda-developers.com/showthread.php?t=2542219 Good luck, it will delete everything on the phone.
Sent from my Moto G using XDA Free mobile app
twofive said:
It boots right back into Recovery. It always does that, no matter if I do it from the OS, the bootloader, whatever.
Click to expand...
Click to collapse
hmmm....something similar happened to me about 2 days ago when I DL the ota, then tried to install it, but it failed. the phone rebooted into the system and a minute later it roobooted itsself back into recovery and tried to install the update again. Of course, the ota's are DL to the /cache folder by default, but once install is attempted, it erases it from that folder, but phone kept rebooting and trying to install, it failed then rebooted again into recovery. It did this like 5x until I was able to stop this by restoring a prev backup. Not sure if this is your situation, but in posting this experience it might help someone
---------- Post added at 09:53 AM ---------- Previous post was at 09:44 AM ----------
Also, check in your recovery if there is something called 'DISABLE RECOVERY FLASH' and make sure it is checked before rebooting the first time after installing recovery. I maybe mistaking, but I thought it was a bug only found on some earlier CWM builds, not found on TWRP...but recovery flash would make the phone do what you are describing
twofive said:
Hey there XDA, I have a strange problem. Maybe you can help me out.
I just got my Moto G today and after unlocking the bootloader, the first thing I did was flash TWRP (fastboot flash recovery TWRP-2.7.0.0-falcon.img).
I did this with the normal fastboot from the Android SDK, not the Motorola version.
Now everytime I start the device, it always boots right into recovery. Always. Doesn't matter if there's TWRP, CWM or Stock installed.
I also flashed the device to GPE afterwards (using the Motorola fastboot) which should've erased everything, but it still does it.
The only way I can get into the actual system is by flashing the normal boot.img as recovery (fastboot flash recovery boot.img).
Can someone please shed some light on this for me? I'd be eternally grateful.
Thanks in advance.
Kenny
Click to expand...
Click to collapse
You shouldn't have that issue, but you might have to try the latest 2.6.x branch of TWRP. I've seen both but never know which one is really better.
Also, why use the GPE edition? The moto stuff in the moto g is better than the google equivalents, especially the camera app and moto assist, but to each his own.
sprockkets said:
Also, why use the GPE edition? The moto stuff in the moto g is better than the google equivalents, especially the camera app and moto assist, but to each his own.
Click to expand...
Click to collapse
I also own a Nexus 5, Xperia Z Ultra flashed to GPE, and a Nexus 7. I just like having the same Software on all of them.
Hey try this.
twofive said:
I also own a Nexus 5, Xperia Z Ultra flashed to GPE, and a Nexus 7. I just like having the same Software on all of them.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0Bx3fLPcfAf3BcmRmdENLWHhPaDQ/edit?pli=1
http://forum.xda-developers.com/showthread.php?t=2746401
Booting to recovery (twrp&cmw) when rebooting to system
twofive said:
hey there xda, i have a strange problem. Maybe you can help me out.
I just got my moto g today and after unlocking the bootloader, the first thing i did was flash twrp (fastboot flash recovery twrp-2.7.0.0-falcon.img).
I did this with the normal fastboot from the android sdk, not the motorola version.
Now everytime i start the device, it always boots right into recovery. Always. Doesn't matter if there's twrp, cwm or stock installed.
I also flashed the device to gpe afterwards (using the motorola fastboot) which should've erased everything, but it still does it.
The only way i can get into the actual system is by flashing the normal boot.img as recovery (fastboot flash recovery boot.img).
Can someone please shed some light on this for me? I'd be eternally grateful.
Thanks in advance.
Kenny
Click to expand...
Click to collapse
dear all,
pls help me.. I'm facing the same problem when i'm rebooting system from my recovery screen and it's rebooting to recovery . I cannot find any relevant solution for this anywhere. So please help me. I'm using moto g falcon (xt1033)
princehpd said:
dear all,
pls help me.. I'm facing the same problem when i'm rebooting system from my recovery screen and it's rebooting to recovery . I cannot find any relevant solution for this anywhere. So please help me. I'm using moto g falcon (xt1033)
Click to expand...
Click to collapse
Which version you were before that i mean lollipop or marshmallow and stock or custom roms?
Cyanogenmod 13
abhi0502 said:
Which version you were before that i mean lollipop or marshmallow and stock or custom roms?
Click to expand...
Click to collapse
BEFORE ROOTING I WAS ON ANDROID LOLLIPOP AND AFTER THAT I FLASHED CYANOGENMOD 13. RECENT ONE WAS CrDROID BASED ON ANDROID MARSHMALLOW. PLS HELP..
Ok I now have this problem also
Even flashing stock rom does not fix it.
Does anyone have any suggestions ??
The phone will say boot loader unlocked as usu then black screen then flashes stock recovery no command screen , then the device turns off. I can access boot loader mode !
That's about all I have :/
Any help would be greatly appreciated
I have the same problem, or similar. I installed CM13 but it didn't like me so much and when I wanted to reboot the phone to restore my previous backup I went to "Advanced reboot menu" and then just reboot recovery. And the phone never could boot again to system, I tried flashing 5.1 and various recoveries but nothing happended.
As nobody responses my trhead I was obliged to send my Moto G to an unofficial customer service, I have to go today to take up my phone, it should be ready, I hope.
Good luck, if they told me how they fixed it I'll post here.
Ok I think I may have found the fix. Flash all of the stock files normally , then flash boot.img once more. Then the phone will boot normally but only for one time. Quickly run though setup , then in the setting app factory reset your device. Your device will reboot and reset once more. Then the device will always boot normal This actually seems to work. I spent all night yesterday trying to fix my device and I finally found the solution. ! ��
therealduff1 said:
Ok I think I may have found the fix. Flash all of the stock files normally , then flash boot.img once more. Then the phone will boot normally but only for one time. Quickly run though setup , then in the setting app factory reset your device. Your device will reboot and reset once more. Then the device will always boot normal This actually seems to work. I spent all night yesterday trying to fix my device and I finally found the solution. ! ��
Click to expand...
Click to collapse
Man, I did that but it didn't work for me. Now when I reboot from fastboot the device power up directly to fastboot mode and on the log it shows
Fastboot reason: UTAG "bootmode" configured as fastboot
Anyway if I powerup from fastboot mode the phone sucks on the bootloader screen.
I had the same problem and was searching from this noon. Just now, i downloaded and flashed with Cyanogen Recovery "cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon-recovery" and my problem is over now. Tried a couple of power off and restarts and now my reboots and power on will not go to recovery any more.
File is available to download at cyanogenmod website
Please make sure about your model before download. I use a Moto G 2013 XT1033 Asia Retail edition with 8GB.
I tried installing that recovery but I'm getting the exact same issue...
Any other solution? No one has solved it yet?
I got the same problem here.. My Moto G default boot is to recovery. The way i could enter the rom is with Bootloader option "Normal powerup". I already try many ways, reflash custom recovery (TWRP, CWM, CM), reflash stock, and reflash custom rom, but they do nothing to this case. Is there any way to change it back to normal? I'm currently on CM 12.1 Unofficial and running TWRP 2.8.6.0. It is not panic attack, it just anoying. Thanks in advance..
same here.. booting always into recovery by default..
tried different twrp versions (incl. 2.8.7), CWM and cyanogen recovery.. and also tried wiping the complete system.. reinstalling stock rom incl. bootloader, recovery, etc..
everytime the same boot into recovery by default
using "fastboot reboot" in bootloader mode also boots into recovery
in bootloadermode i'm able to boot my fresh installed CM12.1 by selecting "Normal Powerup"
maybe something happened with the bootloader configuration? where to edit it?
this also did not help:
mfastboot oem fb_mode_clear
Click to expand...
Click to collapse
(as i understand.. this just clears the fb_mode_set value.. which directs to bootloader on boot
edit:
# fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 411A
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Toshiba REV=06 PRV=01 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) cid: 0x0007
(bootloader) channelid: 0x00
(bootloader) uid: 66FFC4020F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Aug 19 2:19:55 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_retde/falcon_umts:
(bootloader) ro.build.fingerprint[1]: 5.1/LPB23.13-56/56:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) ro.build.version.full[0]: Blur_Version.221.21.56.falcon_umt
(bootloader) ro.build.version.full[1]: s.Retail.en.DE
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g89906d6 ([email protected]
(bootloader) kernel.version[1]: ilclbld34) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Aug 17 19:06:25 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V41.1A-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.1A-0-g199f3c5
(bootloader) rpm.git: git=MBM-NG-V41.1A-0-g8b7736e
(bootloader) tz.git: git=MBM-NG-V41.1A-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.1A-0-g80481ae
(bootloader) qe: qe 2/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.057s
Click to expand...
Click to collapse
Hi everyone,
I hope someone can. Help. Unfortunately I flashed a bad firmware and therefore have the problem, that download mode doesn't work (power button + vol down --> gets to the dark screen with htc logo but then goes completely off) AND bootloader also doesn't work (power + vol up --> gets to white screen with green HTC logo but also goes completely off)! Any chance to get my A9 back to life? Any ideas? Thanks!
Original cid/mid
cid: HTC__034
mid: 2PQ910000
Now on super cid, s-off
SpeziesTR said:
Hi everyone,
I hope someone can. Help. Unfortunately I flashed a bad firmware and therefore have the problem, that download mode doesn't work (power button + vol down --> gets to the dark screen with htc logo but then goes completely off) AND bootloader also doesn't work (power + vol up --> gets to white screen with green HTC logo but also goes completely off)! Any chance to get my A9 back to life? Any ideas? Thanks!
Original cid/mid
cid: HTC__034
mid: 2PQ910000
Now on super cid, s-off
Click to expand...
Click to collapse
You flash which version of firmware? A9 original version of what? now you can into bootloader mode?
Hi thanks for answering. I flashed 1.57.617.20 firmware, but saw too late thats not for my model...
I cannot enter bootloader. When I press Power + Vol up, white screen and green HTC logo shows for 1-2 seconds and then the phone turns off completely...
SpeziesTR said:
Hi thanks for answering. I flashed 1.57.617.20 firmware, but saw too late thats not for my model...
I cannot enter bootloader. When I press Power + Vol up, white screen and green HTC logo shows for 1-2 seconds and then the phone turns off completely...
Click to expand...
Click to collapse
When you at the "dark screen with htc logo" . enter cmd command "fastboot reboot-bootloader" can you into bootloader mode?
Hi, the dark screen is also only there for 1-2 seconds, then device turns off again...
SpeziesTR said:
Hi, the dark screen is also only there for 1-2 seconds, then device turns off again...
Click to expand...
Click to collapse
You need to flash 1.56.401.70 of aboot_signed.img & hosd_signed.img.but this must be in bootloader mode .
A9_1.56.401.70.rar
HTC SYNC adb tools
Code:
fastboot flash aboot aboot_signed.img
fastboot flash hosd hosd_signed.img
fastboot reboot
Now unable into bootloader mode is the biggest problem.
@ nenebear: Thanks for your help so far!
Has anyone else a clue how to start into bootloader?
i have almost the same problem. my screen is black all the way but all the buttons work and i can hear it boot but the screen does not turn on
I managed to get into bootloader and from there into recovery. I had to press vol up + vol down + power so the device would boot into bootloader. Very strange as this is not the normal combination. I restored my previous image, it will boot but is somehow slow and sluggish.
Nevertheless I did flash
fastboot flash aboot aboot_signed.img
fastboot flash hosd hosd_signed.img
fastboot reboot
but I'm still not able to go to download mode. Furthermore beeing in bootloader reading basic information is not possible. For example:
...\HTC One A9\mini-sdk>fastboot devices
HT******** fastboot
...\HTC One A9\mini-sdk>fastboot getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x29b000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xc6000000
(bootloader) serialno:HT********
all:
finished. total time: 0.080s
...\HTC One A9\mini-sdk>fastboot oem readcid
...
FAILED (remote: unknown command)
finished. total time: 0.004s
...\HTC One A9\mini-sdk>fastboot oem readmid
...
FAILED (remote: unknown command)
finished. total time: 0.011s
Anyone a clue how to fix my A9 completely?
Hi,
i just tried to flash system.img (which I decrypted from 1.56.401.70 ROM.zip) but unfortunately got the following error.
Code:
fastboot flash system system.img
htc_fastboot v3.0.9.2 (2015-05-29)
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
erasing 'system'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.001s
htc_fastboot finished. total time: 134.464s
Flashing Boot.img, aboot.img etc. is working....
Has someone a clue?
I fixed the problem. I flashed firmware and rom from 1.27.401.5. After that download mode was working again and I could flash 1.56.401.70 without a problem.
Now I'm on Icanas ROM and my A9 is working better than ever...
I did the same flashed a bad firmware. I can access bootloader but not download mode. I have restored a backup I had in twrp so I am running a rooted stock rom but I still can't update my phone thru RUU or Download mode. I have tried flashing the 2p9qimg ( firmware img/ zip ) thru fastboot thru bootloader but no go. All I want to do is flash the correct file so I can access download mode
S-Off
At&T converted to Unlocked
CID & MID changed
nenebear said:
You need to flash 1.56.401.70 of aboot_signed.img & hosd_signed.img.but this must be in bootloader mode .
A9_1.56.401.70.rar
HTC SYNC adb tools
Code:
fastboot flash aboot aboot_signed.img
fastboot flash hosd hosd_signed.img
fastboot reboot
Click to expand...
Click to collapse
which img files do I need to flash if I'm on 1.12.617.6 S- off US Unlocked converted from S-On At&t. I can't get into download mode, it turns off after the HTC logo with black background. Bootloader, recovery and my phone work though.
Nevermind figured it out! =)
Good day guys,
This is my first post in xda, and i'm a little bit nervous. and please bear with my english and i am a noob to some terms too. anyway, my unit is htc one a9. it was sent to me by my brother here in philippines. it is a sprint htc and i think it is a cdma with a sim slot and memory on the side. after reading some of your topics in some forums, i manage to unlock the the network. i can make outgoing and incoming calls and sms. but GPRS is disconnected. i then found another topic by jianC on how to Convert Sprint/Boost HTC One A9 to Dev Unlock. for it says that it can solve No mobile data (but have voice/sms) on sprint firmware after sim unlock. i followed the instructions but unfortunately it brick my phone. i flashed the 2PQ9IMG_HIA_AERO_UL_M60_SENSE7GP_ATT_NA_Gen_Unlock_1.12.617.6_signed.zip, to my phone. My old firmware was 2PQ9IMG_HIA_AERO[email protected]51002_15.00_F_CNV_CNV_HIAE_SPCS_1.15_003_release_453002_signed.zip. Now my problem is that i can get in to bootloader mode by pressing power+vol up+vol down together which is awkward.......but i cannot get in to download mode and recovery mode. the phone can still display the htc logo but 15 seconds later it shutsdown. i tried your advice to type fastboot erase system but it says FAILED<remote:device is locked. cannot erase. But my phone is Bootloader Unlocked and S-Off from sunshine. CID/MID (SPCS_001/2PQ93000) before. I change it to (11111111/2PQ912000) after. Then i tried to flash. I really don't know where to start until i found this forum. I hope somebody could help me in this problem i have.
Thanks and sincerely yours,
kramned
Hello,
One month ago, I installed the last version of weekly ROM from xiaomi.eu, this version : miui 8.3 by xiaomi.eu - 7.4.6.
I have several bugs and I would like to install the stable ROM.
So I try to boot in Recovery Mode and the phone blocks on the "MI" logo with black font.
I go to Fastboot Mode and I install the last TWRP Recovery, no problem but the phone blocks always on the MI logo.
I tried TWRP 3.1.0, 3.0.2. and also the Recovery from superluminal (TS 3.0.2-0) but always the same problem.
What can I do to have a recovery ?
Thanks a lot for your answers !
Do you have an unlocked bootloader?
Trimis de pe al meu Mi-4c folosind Tapatalk
Yes, the command C:\adb>fastboot oem device-info says that :
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
I finally find a solution !
I tried to install my ROM in fastboot, I erase all the data then I tried to install the ROM but it didn't work (error message "No android-version.txt" or something like that).
My phone was totally block, because I had no Recovery and no ROM...
I remembered the guide to unlock the bootloader with the tools MiFlash. I install an old package (6.1.7) and it worked.
Then I installed the last version of TWRP and then the last stable version from xiaomi.eu
Hello All,
Please can someone help, I successfully rooted my htc u11 and put a custom rom on to phone . I decided to go back to stock and restore my phone as new. I had unlocked and locked my bootloader all ok.
Now I have the problems, my phone cant seem to unlock bootloader, everytime I try and fastboot recovery or roms. I get this message 9 ru security fail recovery and bootloader isn't bl-unlocke.
Im stuck ,plus when I boot the phone I get the message, your phone is not to be trusted . Please can anyone help.
mackenzie121 said:
Hello All,
Please can someone help, I successfully rooted my htc u11 and put a custom rom on to phone . I decided to go back to stock and restore my phone as new. I had unlocked and locked my bootloader all ok.
Now I have the problems, my phone cant seem to unlock bootloader, everytime I try and fastboot recovery or roms. I get this message 9 ru security fail recovery and bootloader isn't bl-unlocke.
Im stuck ,plus when I boot the phone I get the message, your phone is not to be trusted . Please can anyone help.
Click to expand...
Click to collapse
Hi, let's see if there's any chance...
Enter the download mode and connect it to the PC then type fastboot devices to make it recognize.
If you recognize it, try typing fastboot oem get_identifier_token and see what happens...
paulpier007 said:
Hi, let's see if there's any chance...
Enter the download mode and connect it to the PC then type fastboot devices to make it recognize.
If you recognize it, try typing fastboot oem get_identifier_token and see what happens...
Click to expand...
Click to collapse
yeah fastboot devices sees it and recongnizes it biut when I do oem get identifier I get
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.012s]
finished. total time: 0.012s
mackenzie121 said:
yeah fastboot devices sees it and recongnizes it biut when I do oem get identifier I get
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.012s]
finished. total time: 0.012s
Click to expand...
Click to collapse
Did you try running a RUU
thicklizard said:
Did you try running a RUU
Click to expand...
Click to collapse
as in putting the rom on memory card and booting into download mode? and pressing up on the volume. yes I have tried many , but they all say mismatch. Unless im doing something wrong?
cant seem to find the right RUU.
this is what I have on my phone
****relocked***
***production***
htc_ocnuhl pvt s-on
LK-1.0.0.0000
radio-8998-002772tov-1802241313
openDSP-v11.6.00.347.cb8998_0711
os - 2.33.206.9
You can find RUU files here(in thread search):
https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048
mackenzie121 said:
as in putting the rom on memory card and booting into download mode? and pressing up on the volume. yes I have tried many , but they all say mismatch. Unless im doing something wrong?
cant seem to find the right RUU.
this is what I have on my phone
****relocked***
***production***
htc_ocnuhl pvt s-on
LK-1.0.0.0000
radio-8998-002772tov-1802241313
openDSP-v11.6.00.347.cb8998_0711
os - 2.33.206.9
Click to expand...
Click to collapse
i had same problem,
start unlocking your bootloader on htcdev website and take new token: (fastboot oem get_identifier_token) until you save NEW "Unlock_code.bin” in fastboot directory then : (fastboot flash unlocktoken Unlock_code.bin)
just start all from the beginning and everything should go right
Or
copy RUU to your external sd card and rename to 2PZCIMG (leave the .zip extension untouched); reboot to download mode and it will ask you (in yellow) to choose UP to start the RUU flash (previously copied to the External SD card) or DOWN to cancel flash and make a normal boot.