Q&A for [ KERNEL - october 19 ] Dhollmen 3.0.101 for AOSP
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Works flawlessly
tuxafgmur said:
:
New Kernel release 2014 10 19 available to download.
Click to expand...
Click to collapse
Thank you, sir! P5113 functioning super fast!!
ZRAM
which is the default size of zram?
I have installed the latest kernel for about 3 to 4 days and compare with the last one kernel (which the date is Sep 18.)
I found that the performance has been slightly increased, however the battery drained faster than before.
For me, I would prefer the old one rather than the newest one.
Please keep in mind and try to fix the battery drain problem
Hope these could help you to improve the kernel !
Work hard and support !
Lollipop
Any plans for a CM12 kernel?
Related
Q&A for [ ROM ] - Dhollmen KIT-KAT * 4.4.4 * - 2014 10 09
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
camera do not work!!!
i install the rom on my p3100 7 inc tap it is a good rom put camera do not work even if i download another camera app
mhryx said:
i install the rom on my p3100 7 inc tap it is a good rom put camera do not work even if i download another camera app
Click to expand...
Click to collapse
New release un 30 minutes.
I have downloaded Dhollmen Kitkat 4.4.4 20150314 for p3100. But I am having problems with the color scheme. I have checked md5checksum. Somewhere it is too white and at someplaces it is too dark. Though there is a theme toggle between light and dark, but it does not do anything. I am new so can't comment in the main thread. This ROM and Kernel is good with simplicity and performance balanced. Lollipop does not have as much functionality as kitkat offers. So please help 8n this regard. @tuxafgmur Screenshots attached
Screenshots. Its difficult to read the text sometimes.
In reboot section soft reboot is mentioned as Android. Is it by mistake or you kept it that way.
Q&A for [Rom][Unofficial] SlimKat for Moto G 4G
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
SlimKat Bootloop
Flashed and get stuck in bootloop
I'm running the official weeklies since a few weeks, running perfectly!
Check out official website!
local_manifest
Trying to build slim for moto peregrine for the first time, but after repo sync there is no local_manifest that mentions peregrine at all? As the result I can't build the whole thing. What am I missing? Am I supposed to create local_manifest myself?
I can't help you so much, as i don't own a 64bits computer.
Just wondering why you want to build it, instead of downloading it here: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1321-peregrine
Babyrasta said:
I can't help you so much, as i don't own a 64bits computer.
Just wondering why you want to build it, instead of downloading it here: <link removed since I don't have permissions to post links>
Click to expand...
Click to collapse
No, I'd like to build it. It's not that difficult to find info on how to download and install it, there are plenty of guides, etc. It's more tricky figuring out how to build it - not so much information is turned up by google. In any case, thank you for taking time to reply.
Its rare, because i just installed this rom, and i have 0 issues, i dont have bugs at the navigation bar, installed Aokp light gapps
Q&A for [KERNEL][Sep14] ElementalX-1.3 | Universal | S2W | DT2W | Android 4.3
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][Sep14] ElementalX-1.3 | Universal | S2W | DT2W | Android 4.3. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Just flashed to ElementalX-1.3 - good times
Just flashed Xoom 4.1.2 to ElementalX-1.3 . really enjoying the performance boost and overclocking capabilities. Edited build.prop heapgrowthlimit parameter from 48M to 64M in order to load some apps that required more in the java heap. All is well.
ElementalX 2.1 does not want to boot from Recovery(CWM). I called it good by just living with 1.3 - I should be able to run. 2.1 with a wingray JZ054K 4.1.2 right?
EDIT: probably need to do BigPart mod. Duh
Thanks in advance
Cheers
Geoff
Elementals sound issues.
I am running cm11 everest on a xoom with big part mod. The audio was okay. After flashing lementalx 2.1 the audio became all static. Any idea what i did wrong and how to fix it?? Help please.
Is there a way to enable ethernet?
ElementalX App working with the Xoom kernel?
Will this app working with the ElementalX-kernel comming with that CM11 ROM for Xoom ([ROM][4.4.4] CyanogenMod 11.0 - Wingray Stingray Everest - bigPart)?
Thanks in advance.
Cheers, Bart
[Q&A] [KERNEL][GPL][Dev Talk] Render Kernel [06/03][r23] DT2W & S2W working with Dee
Q&A for [KERNEL][GPL][Dev Talk] Render Kernel [06/03][r23] DT2W & S2W working with Deep Sleep
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][GPL][Dev Talk] Render Kernel [06/03][r23] DT2W & S2W working with Deep Sleep . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i wonder if this kernel compatible with CrDroid ROM?
edit: and.. my phone stuck in bootanimation, so i guess isnt compatible
XSE01 said:
i wonder if this kernel compatible with CrDroid ROM?
edit: and.. my phone stuck in bootanimation, so i guess isnt compatible
Click to expand...
Click to collapse
Yea, I a have been busy with other endeavors. I now have the G2 and build for it and its 7 f'n variants. So its just a little too much for me to build for the Moto G right now.
Stuck in Boot Logo, XT1031 cm11
not workking in my CM11 with android 4.4.4, just stuck in boot logo without boot animation but i could hear the sound when i plug/unplug charger, & the volume button sound too.
xt1031
.
.
.
maybe sent boot.img from my rom can helping me
Q&A for [KERNEL] Bricked-Kernel Hammerhead | Sweep2wake | KnockKnock/Dt2w
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] Bricked-Kernel Hammerhead | Sweep2wake | KnockKnock/Dt2w. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Kernel with diag mode
Hi, i have 5.1
This kernel has diag mode? Ty:good:
Is a sale for kcontrol app planned?
Or is there any way to enable sweep to sleep without an app?
Dear Bricked kernel Developer and Pro consumer
Excuse me. I am novice(beginner).
Q1.
when released next stable version?
(lastest stable version is 15/03/23)
Q2.
I use stock rom 5.1.1(LMY48B) & stock kernel after format.
I will use
LMY48B stock Rom and Bricked stable kernel(15/03/23)
This combination is good harmony(stable?) ? OR Wait next stable version??
Q3.
I love bricked kernel and KControl.
Because many smoothness and High performance.
I think that default settings are High performance and high temperature.
Did you recommend me between battery and performance balance settings?
I don't speak english well.
Excuse me.
Thank you for reading this thread.
Dear Bricked Kernel Developer
Will You update The kernel to 5.1.1 sources ?
I like your kernel and KControl app.
bsp54 said:
Excuse me. I am novice(beginner).
Q1.
when released next stable version?
(lastest stable version is 15/03/23)
Q2.
I use stock rom 5.1.1(LMY48B) & stock kernel after format.
I will use
LMY48B stock Rom and Bricked stable kernel(15/03/23)
This combination is good harmony(stable?) ? OR Wait next stable version??
Q3.
I love bricked kernel and KControl.
Because many smoothness and High performance.
I think that default settings are High performance and high temperature.
Did you recommend me between battery and performance balance settings?
I don't speak english well.
Excuse me.
Thank you for reading this thread.
Click to expand...
Click to collapse
I cann' t speak for @show-p1984 but here is what I think.
Q1. Next stable might be when android M gets released.
Q2. Yes it should work on 5.1.1. Do not try on android M as it won't work.
Q3. I use following settings
Low Freq 96 Mhz
High Freq 2265 Mhz
Governor Conservative
Touchboost On
Run queues to hot plug 15, 30, 40
Run queues to unplug, 10, 15, 25
Undervolted to 700mV
Get good performance and very good battery life.
Thank you very much.
shri_chanakya said:
I cann' t speak for @show-p1984 but here is what I think.
Q1. Next stable might be when android M gets released.
Q2. Yes it should work on 5.1.1. Do not try on android M as it won't work.
Q3. I use following settings
Low Freq 96 Mhz
High Freq 2265 Mhz
Governor Conservative
Touchboost On
Run queues to hot plug 15, 30, 40
Run queues to unplug, 10, 15, 25
Undervolted to 700mV
Get good performance and very good battery life.
Click to expand...
Click to collapse
Thank you very much.
I love your kindness.