Hello,
Did someone know how to activate the speaker on each call without using the long press key on the green one.( with a soft ?)
thanks.
Well, I have the option in my dialer to just press "speaker" (one of the buttons along with 'mute' and 'end' etc.) and it does it?
thanks but i know that one, I just want to make it automatically after answering
Any ideas ???
Is this what u want?
Is this what you are looking for:
http://freewareppc.com/communication/speakerphoneautoon.shtml
Thank you I found my answer
I found the post
http://forum.xda-developers.com/showthread.php?t=369399
I have tried it but It doesn't work on my cruise.
Can please tell me if it works on yours
Thanks
FYI These codes have been obtained by decoding various .apk files present in the phone firmware.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.
Atleast say thanks
Great list of codes thanks for sharing it.
thank you
but some codes not working!
You can also enter the following code while in the lockscreen to get to most of the above mentioned service pages:
Menu, Back, Back, Menu, Back, Menu, Menu, Back
Good set of information, thanks for the post. gonna try some now.
Thank you..
Thank you for the codes...
Thanks for the codes, I'm going to add them to my wiki.
thanks for sharing
Just tried these out, and it turns out that the earpiece can actually get pretty damn loud... so it is a software problem after all (in-call volume).
Clyzm said:
Just tried these out, and it turns out that the earpiece can actually get pretty damn loud... so it is a software problem after all (in-call volume).
Click to expand...
Click to collapse
which code u use to make volume louder?
I've tried a number of these codes and nothing happens (except the phone information code).
I have a rooted x10a from Rogers 024 firmware
Thanks for the list though!
swapniladsure said:
which code u use to make volume louder?
Click to expand...
Click to collapse
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
beno1 said:
You can also enter the following code while in the lockscreen to get to most of the above mentioned service pages:
Menu, Back, Back, Menu, Back, Menu, Menu, Back
Click to expand...
Click to collapse
great list of codes! ive been meaning to get all these together and save them somewhere....here i come, copy and paste!
thank you guys
Clyzm said:
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
Click to expand...
Click to collapse
hey dude its only increase the volume on testing time...but when u actually make call than earepice volume is less....
any ways i tried to give my best code...
if in future if i find any new code than i will update it soon..
thank you u guys for all your replys
swapniladsure said:
hey dude its only increase the volume on testing time...but when u actually make call than earepice volume is less....
any ways i tried to give my best code...
if in future if i find any new code than i will update it soon..
thank you u guys for all your replys
Click to expand...
Click to collapse
...that's what I just said. All it does is test the speaker, it doesn't change any settings in the phone. All I said was that the speaker has the potential to have louder call volume.
About earpiece volume. This didn't work for me, but so far none of the codes are. Give it a try and let us know if it works for you.
Taken from the following website...
http://androidforums.com/1263586-post1.html
Earpiece volume to low? I'm talking about the earpiece speaker built into the phone, the part you hold to your ear. You can increase this volume beyond maximum factory setting. When you change this, please change it slowly, meaning 1 increment at a time, you don't want to blow your speakers out. Thank you to the user over at xda-developer forums who showed me how to do this. update: it seems if you do a reboot of your phone, the settings revert back to factory for this volume fix...working to try to figure out a way to lock in the new volume settings.
Okay, lets begin. Go to your dial pad. Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use 1 increments. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Clyzm said:
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
Click to expand...
Click to collapse
I tried this and the volume was much louder! the issue was it really stared to disort and sound sh#t on the piano spot. So the reason why the volume is so low is the dam speaker is ****! Increasing the volume will cause more distortion and make things worse. I be happy to live with this for the next few years till my contract is over...
let me see this...
Terul said:
About earpiece volume. This didn't work for me, but so far none of the codes are. Give it a try and let us know if it works for you.
Taken from the following website...
http://androidforums.com/1263586-post1.html
Earpiece volume to low? I'm talking about the earpiece speaker built into the phone, the part you hold to your ear. You can increase this volume beyond maximum factory setting. When you change this, please change it slowly, meaning 1 increment at a time, you don't want to blow your speakers out. Thank you to the user over at xda-developer forums who showed me how to do this. update: it seems if you do a reboot of your phone, the settings revert back to factory for this volume fix...working to try to figure out a way to lock in the new volume settings.
Okay, lets begin. Go to your dial pad. Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use 1 increments. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Click to expand...
Click to collapse
let me see this it gona work or not
Hi,
also these codes are not working for me, except the *#*#4636#*#*.
The quoted post is related to Samsung Phones (Vibrant) and this is most probably the reson why it doesn't work on SE X10.
However, does someone know another set of codes for X10? The Service Menu, entered by the Menu/Back combination, shows a list item "Service settings" but with "No Item" in the next menu level. Is there any known trick to unlock this settings? Maybe there could be a option to adjust in-call volume...
All the Best
Peter
EDIT: X10i, R2BA026 rooted
no not yet solution for speaker volume increase
no solution yet..
let me try to replace speaker on my x10i
i will try to put any other speaker from other sony to my x10i..
same for loudspeaker also..
replace the ringer for mp3 volume increase of phone
but let me try this and than i will post u all
is there any tweak or mod for one mini in dialer when your calling one number multiple times and when is busy you just press once call back button and phone is starting to call the number again?
the dialer will generally display the name/number of the last person you connected with, so just tap on it and it automatically dials.
PuffDaddy_d said:
the dialer will generally display the name/number of the last person you connected with, so just tap on it and it automatically dials.
Click to expand...
Click to collapse
ok this is the deal,I'm calling some radio stations for some free stuff,and with android dialer it takes so much time after its shows busy and get back to dialer again so i need to tap on back button to make it faster but after i tap back I'm getting home screen,so i know its weird question i could not find mod to tweak for that,on bbs after its shows busy the call back button appears and i need just to press once and phone start to call same number again wiry good and fast dialling so there is such a option for htc?
Hello,
After getting my Gear S2 back from Samsung service (I tried to wash it via the faucet water stream, it entered an infinite reboot cycle and then died - IP68 compatible huh?) I turned it on and it appeared to enter some sort of Service Menu. I haven't left this menu (nor do I know how, except maybe a factory reset?), but I would like to know how I could reenter it if I wished to, in the future. Googling for this yielded no results, and that is shocking. I wanted to post an image showing this menu, but I'm not allowed to since I've got less than 10 posts.
Thanks.
Should be able to just upload it to a photo service, like imgur and just pasting the link as text, if you wish to share it. Interested in what it looks like.
Hi. Looking for this menu in the web, i found the method for the Gear 2, and *i think* is the same. I tried succesfully in my Gear S2.
Just go to the dialer and press: *#0*#
and you can enter to a menu titled TESTMODE
You can exit from this menu pressing twice in the upper button.
Greetings.
Pressing the upper button twice does nothing. In fact, I'm unable to exit this mode even with a restart or a factory reset (via Gear Info -> Reset). Here's the link, delete the spaces.
http :// i . imgur . com / taR0NEH.jpg
I brought it back to the service and apparently they forgot to flash it. That was a default service Tizen that ships from the factory. It contains tests and it's supposed to be overwritten once the mobo is replaced.
Bixthor said:
Hi. Looking for this menu in the web, i found the method for the Gear 2, and *i think* is the same. I tried succesfully in my Gear S2.
Just go to the dialer and press: *#0*#
and you can enter to a menu titled TESTMODE
You can exit from this menu pressing twice in the upper button.
Greetings.
Click to expand...
Click to collapse
Thanks for the info about the Test Mode. The Sensor screen was fun.
Rob
Good!. I tried to find this menu but i only guessed that is for developer options or something like that (because a lot of tizen icons).
Also i tried some codes for Samsung devices and found some of them work in my Gear S2 (use at your own risk):
*#06# Serial Number
*#0*# LCD Test Menu
*#1234# Version Info
*#12580*369# Main Version
*#0228# Battery Status
*#0*# General Test Mode
*#2663# Touch Firmware Version
*#0283# Audio Loopback Control
*#9900# Log Dump
*#34971539# Camera Firmware Update
*#7353# Self Test
Greetings
Did anyone noticed...
I find an easy way to input these codes; plus others that in the dialer doesn't work.
Go to Settings>> Gear info>> Device>> Software version (push 5 times the button) A system ui with a different dialer let you input codes- it's like when we try to get the developer options on android phone.
Hope it helped!
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
josemolto said:
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
Click to expand...
Click to collapse
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
milkyway3 said:
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
Click to expand...
Click to collapse
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
milkyway3 said:
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
Click to expand...
Click to collapse
See the screenshot below