Q&A for [ROM][4.4.4][KTU84Q] SlimKat - Skyrocket [OFFICIAL+Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
NOT BOOTING after Restart Slim-skyrocket-4.4.4.build.8.0-OFFICIAL-6904
Slim-skyrocket-4.4.4.build.8.0-OFFICIAL-6904 was install successfully, but when i restart the phone it won't boot or start... After Samsung Logo it get blank.... please solve this issue..
Thanks..
Laiq
[email protected]
SAMSUNG SGH-i727 SKYROCKET user.
layeeq4u said:
Slim-skyrocket-4.4.4.build.8.0-OFFICIAL-6904 was install successfully, but when i restart the phone it won't boot or start... After Samsung Logo it get blank.... please solve this issue..
Thanks..
Laiq
[email protected]
SAMSUNG SGH-i727 SKYROCKET user.
Click to expand...
Click to collapse
Verify the SHA1 hash on your downloaded zip file matches the one here under the version you downloaded. If not, re-download the file and check again.
What version of Android are you coming from? Did you do a Full Wipe?
Check out this Slim Installation guide.
cool
SlimKat 9.0 - GAPPS
Hi,
Just downloaded the SlimKat 9.0 version for Skyrocket. But I could not locate GAPPS for SlimKat 9.0. Does it mean that SlimKat 9.0 ROM can be installed with SlimKat GAPPS 8.0?
demigod86 said:
Hi,
Just downloaded the SlimKat 9.0 version for Skyrocket. But I could not locate GAPPS for SlimKat 9.0. Does it mean that SlimKat 9.0 ROM can be installed with SlimKat GAPPS 8.0?
Click to expand...
Click to collapse
They should be appearing on the Slim site some time this week. @dankoman has then hosted on his Basketbuild account here :
https://s.basketbuild.com/devs/dankoman/slimkat_gapps
I think the v8 ones were just renamed for consistency, and the v385 GApps should work. The testing done for Stable 9 used the above GApps and the v385 GApps here:
http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4
Sent from my OnePlus One BACON using Tapatalk
Related
Q&A for [Rom][Unofficial] SlimKat for Moto G 4G
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
SlimKat Bootloop
Flashed and get stuck in bootloop
I'm running the official weeklies since a few weeks, running perfectly!
Check out official website!
local_manifest
Trying to build slim for moto peregrine for the first time, but after repo sync there is no local_manifest that mentions peregrine at all? As the result I can't build the whole thing. What am I missing? Am I supposed to create local_manifest myself?
I can't help you so much, as i don't own a 64bits computer.
Just wondering why you want to build it, instead of downloading it here: http://slimroms.net/index.php/downloads/dlsearch/viewcategory/1321-peregrine
Babyrasta said:
I can't help you so much, as i don't own a 64bits computer.
Just wondering why you want to build it, instead of downloading it here: <link removed since I don't have permissions to post links>
Click to expand...
Click to collapse
No, I'd like to build it. It's not that difficult to find info on how to download and install it, there are plenty of guides, etc. It's more tricky figuring out how to build it - not so much information is turned up by google. In any case, thank you for taking time to reply.
Its rare, because i just installed this rom, and i have 0 issues, i dont have bugs at the navigation bar, installed Aokp light gapps
Q&A for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] CyanogenMod 11 for Acer A510/A511 (with UMTS/3G) [UNOFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
[A511] check.partition.size=[__PROP_UNDEFINED__]
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
AmiH_ said:
Hi,
I've tried installing CM11 on my A511. So in fastboot I've installed recovery-cwm-shreps-6.0.5.0-a510-lvm.img (and later, just to try recovery-cwm-shreps-6.0.4.9-a510-lvm.img).
After a reboot and wipe, I have used "apply update from external strorage" on file cm-11-M11-20141018-UNOFFICIAL-a510-a511_lvm.zip (and later, just to see, what happens cm-11-M10-20140920-UNOFFICIAL-a510-a511_lvm.zip).
In every case after "Verifying update package..." the message check.partition.size=[__PROP_UNDEFINED__] is displayed and everything stops.
What am I doing wrong?
Click to expand...
Click to collapse
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Hi Shreps
Shreps said:
Hi,
What's your bootloader version ?
On which recovery and ROM were you before trying this ?
Did you try with TWRP ?
Click to expand...
Click to collapse
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
AmiH_ said:
Hi Shreps
Bootloader is JB-8efc225 and I am running Image Acer_AV051_A511_RV00RC06_EMEA_DE (Android 4.1.2)
Nope, I have not tried TWRP (yet)- all manuals, I have seen said CWM.. do you think, using TWRP will do?
Click to expand...
Click to collapse
Both TWRP and CWM are compatible with AOSP ROM (Cyano, AOKP, Paranoid, etc.)
I think we never try a jump from 4.1 stock to 4.4.4
Maybe this is the issue. Try with the latest TWRP first, and if it doesn't work try to flash CWM 6.04.5 and flash CyanogenMod 10.1 or 10.2 (Android 4.2.2 / Android 4.3)
If it's working fine, then upgrade recovery and flash a 4.4.4 ROM
applied EBossa
Hi,
TWRP did the job. Thank you very much
Q&A for [SEP-9][4.4.4-R2][1.3.7][hammerhead] AOSB Project - The End of The Line !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [SEP-9][4.4.4-R2][1.3.7][hammerhead] AOSB Project - The End of The Line !. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
AOSB 1.3.7
Dear Developer , I
t is a great job and running fine in my galaxy S4 except few following bugs, thanks you.
my Mobile phone is
GALAXY S4 I9505
Firmware : Stock firmware I9505XXUGNH8, flashed using Oddin.
Running android : 4.4.2
Bugs after installing AOSB 1.3.7 with GAPP 2.0.0
1. OTA keep giving notification that I have new GAPP 2.0.0 is available even though I have installed latest 2.0.0 Gapp via CWM recovery.
2. Get stuck and freeze the phone if do Update via OTA
3. WIFI not re-connecting automatically after reboot, required manual reconnect most of the time after reboot
4. AllShareCast Dongle for Samsung doesn't work, and it very important for me to connect my mobile phone with Samsung TV
hope you can fix those bugs and improve it.
thanks you
Royal Stag
Bugs.
Select Recommended kernel for first install
Which one is it? I can't see that information anywhere
google apps
how can i download google apps?
You need to flash gaaps
Q&A for [ROM] SlimKat [4.4.2] [BUILD 5] [Stable + Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] SlimKat [4.4.2] [BUILD 5] [Stable + Weeklies]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, does anyone have the weekly 7.4 (6152) download link. I've looked in the website, but can't find it. Thanks in advance.
Edit: Nvm, found a copy.
Probs installing slimkat Slim-crespo-4.4.4.build.9.0
Just FYI to anyone trying this - first a dirty flash, then a clean flash of Slim-crespo-4.4.4.build.9.0-WEEKLY-8321 with the Slim_normal_gapps.4.4.4.build.8.x-385. Both installed fine but wouldn't connect to google servers during initial setup - i'd connect to wifi or 3G data (which I verified was connected and working) and enter my google login and it would immediately say "Couldn't sign in". This was the same behavior for both the dirty and the clean flash. Then I clean flashed the Slim-crespo-4.4.4.build.8.20-WEEKLY-8172 zip with the same gapps as above, same problem. Then I flashed the full gapps, same problem. Finally, what worked, was I clean flashed the Slim-crespo-4.4.4.build.8.20-WEEKLY-8172 with the MINI gapps (Slim_mini_gapps.4.4.4.build.8.x-385) from the slimroms apge, and then that worked, and connected to google account login..... hope it helps someone else.
Hello guys, I'd like to install the latest stable version (Slimkat 4.4.2 build 5) on my gf's Nexus S. As this will be my first custom ROM install, I wonder which (minimal) slim_gapps build to use. I managed to get a copy of the 4.4.2 build 5. Or is it safe (or recommended) to use the 4.4.4 build 9?
Thanks in advance.
Hi!
Currently I have a CM11 M8 installed in my Google Nexus S.
I would like to know how much SlimKat is faster and lightweight than CM11?
Does it uses considerably less RAM memory?
Thanks!
hitchhikerkiller said:
Hi!
Currently I have a CM11 M8 installed in my Google Nexus S.
I would like to know how much SlimKat is faster and lightweight than CM11?
Does it uses considerably less RAM memory?
Thanks!
Click to expand...
Click to collapse
Yes it's "faster" on benchmarks, but by only 100's of points.., and yes it is lightweight (nearly 100mb smaller).., and ram usage is very similar per how I used them..
Sent from my A0001 using XDA Premium 4 mobile app
Setting.Out said:
Yes it's "faster" on benchmarks, but by only 100's of points.., and yes it is lightweight (nearly 100mb smaller).., and ram usage is very similar per how I used them..
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Setting.Out!
I decided install SlimKat on my phone yesterday (Google Nexus S/crespo) and I could check this with my own eyes.
It is slightly faster.
It is lightweight in size.
And the TOTAL RAM available in Settings, that was 386MB in CM11, is 409MB in SlimKat.
Q&A for [ROM][5.0.2][lollipop][xt925 and xt926]Resurrection Remix 5.3.5 Unofficial
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][lollipop][xt925 and xt926]Resurrection Remix 5.3.5 Unofficial. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not work
hello,link for xt925 is offline
i getthis rom in other link..and flash it..
....not work..
not install
HELLO, DOWNLOAD VERSION UNIFIED AND SEND ME ERROR Error executing binary updater in zip IN TWRP , AND NO VERSION AVAILABLE FOR XT925 , XT925 HAVE A DIRTY WITH UNICORNS ROM V9.1
signal
does this rom have network issue i am on a gsm network and every lollipop i try for the xt926 i have to reboot the phone about 3times before i get signal
Can't download xt925
I can't download the xt925 version its not there
Boit loader is not unlocking
Hey Everyone,
I am using moto xt926 i wana install this rom but the bootloader is not unlocking what to do can any one help me ?
M0yc3z said:
HELLO, DOWNLOAD VERSION UNIFIED AND SEND ME ERROR Error executing binary updater in zip IN TWRP , AND NO VERSION AVAILABLE FOR XT925 , XT925 HAVE A DIRTY WITH UNICORNS ROM V9.1
Click to expand...
Click to collapse
I just removed the first line in the updater-script under: META-INF\com\google\android\updater-script. Make sure you have the right device though.