[Q&A] [ROM][OFFICIAL][LG-P999] DayDream 1.8 KK 4.4.4 - T-Mobile LG G2x

Q&A for [ROM][OFFICIAL][LG-P999] DayDream 1.8 KK 4.4.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Can't install DayDream Rom on G2x p999
I tried to install the daydream rom on my g2x but whenever I try it aborts.

Installation aborted
Hi, I am getting an error - "Installation Aborted" while installing this. Is there a minimum version of CWM recovery that I should use for flashing this ROM. I currently have 4.0.1.5.
Also, shall I be on some minimum version of ROM for this to work. I currently have gingerbread.
Update -
I have tried with the updated CWM recovery also (5.0.2.0)

I try to install this rom but it error "startus 0", please check this rom again. thanks

I don't think there is anyone on earth that can get KK to work on the g2x. Even ICS and JB were broken as hell for this phone. Not to mention the ROM would have to be made without a lot of features due to partition sizes and such. I would regard this post as a bad joke, but I hope for your sakes I'm wrong.
Sent from my SAMSUNG-SGH-T989 using XDA Free mobile app

Lol
Are all of you getting error code status 0 , if so I just have to laugh here if any of you know any programming language then you'll know what exit(0); does , status zero means it exited with no problems , whether it be installed and you don't realize it or its in the code and meant to be there for some reason

coffenat said:
Are all of you getting error code status 0 , if so I just have to laugh here if any of you know any programming language then you'll know what exit(0); does , status zero means it exited with no problems , whether it be installed and you don't realize it or its in the code and meant to be there for some reason
Click to expand...
Click to collapse
This does not mean it installed and exited with no problems. Why revive a dead thread in the first place? The ROM mentioned isn't even available anymore.

Reason for replying
My reason for replying was simple , I was doing some research and found this thread , a friend of mine had this phone , so was looking to see what was best to put on the device , it's currently running 4.4.2 very smoothly and I never said it installed I said it exited with status 0 as in no errors reported and exit ,"or its in the code and meant to be there for some reason" , anyway last response from me if you keep the thread dead

This whole G2x forum is dead, so there is no way you can avoid reviving dead threads unless you create a new redundant one.

Related

[Q&A] [ROM][KK][4.4.2] CarbonRom [27/2/2014] ~DISCONTINUED~

Q&A for [ROM][KK][4.4.2] CarbonRom [27/2/2014] ~DISCONTINUED~
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
thanks for the rom is excelent!
thanks for your rom.! but i have a error with the screen capture. and screen record,
i write from venezuela, and speak spanish, sorry my bad english
couldn't capture screenshot
couldn't save screenshot. storage may be in use.
aj_ascanio said:
thanks for your rom.! but i have a error with the screen capture. and screen record,
i write from venezuela, and speak spanish, sorry my bad english
couldn't capture screenshot
couldn't save screenshot. storage may be in use.
Click to expand...
Click to collapse
Yeah, sorry man the rom hasn't been updated in ages and I have no plans on updating it. Unfortunately this is a really forsaken device in terms of the level of developer support and support from HTC and Snapdragon as a a whole. I've moved on to another phone and I recommend you move on from it too.
Kerjifire said:
Yeah, sorry man the rom hasn't been updated in ages and I have no plans on updating it. Unfortunately this is a really forsaken device in terms of the level of developer support and support from HTC and Snapdragon as a a whole. I've moved on to another phone and I recommend you move on from it too.
Click to expand...
Click to collapse
Well, in fact it just has been updated by somebody else....mikronac.ns just started to build this ROM several days ago and his builds are up to date
Sent from nowhere over the air...
Rapier said:
Well, in fact it just has been updated by somebody else....mikronac.ns just started to build this ROM several days ago and his builds are up to date
Sent from nowhere over the air...
Click to expand...
Click to collapse
Different phone.
bugs
It sometimes reboots, usually when I am unlocking the phone. Seems like every internet browser is lagging hard, that's the main reason why I changed the ROM. Anyway, CarbonROM with android 4.3.1 is working fine for me and I find it the best (as the dwl links for PAC-MAN and CM11 are broken). Plus it has Halo.
Gapps won't install on Carbon for HTC Ville s3
Hi there,
I just flashed the Carbon ROM for my HTV Ville S3 and it worked perfectly. However, I am not able to flash the GAPPS, I tried with the four GAPPS versions for this ROM and still not working. I am getting this error:
E:Error executing updater binary in zip [...] error flashing zip [...]
Thank you in advance for your help
Hello Team,
I have installed ROM in my HTC One S villec2 model. The ROM is just so awesome and light and I thank team for the great work ahead. Waiting for Carbon to launch Android 5 for villec2 the same way ASAP
There are few issues that I have seen in last 24 hours since I installed it:
1) Camera is not capturing Videos. Though it shows it is recording them, but never saves them in Gallery.
2) Intermittent reboot. I really don't know the pattern or steps to reproduce the issue.
3) Keyboard is getting crashed very often.(This could also be due to wrong gapps that I might have installed, please provide link in case).
4) Screenshot is not working.
If there is any latest patch to fix these issues, please let me know so that I can enjoy this great piece of work by team CARBON.
Regards
AB
All images on kernel 3.4.x don't have a future without modifying the kernel due to major bugs. You should not try.

[Q&A] [KERNEL][CM/AOSP] The Green Machine - V4.0.0 - 09-25-2014

Q&A for [KERNEL][CM/AOSP] The Green Machine - V4.0.0 - 09-25-2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Help
Hello friend, I have a problem installing the kernel, the wifi and usb connection is broked :crying:
Sorry for my bad English
So sad to see this product discontinued!
It was a awesome project!
Although i´m quite upset, I´m grateful for having supported our Moto G!
Trying to get rid of the boot logo
I once had green machine kernel installed, even after a complete wipe and stock kernel install the logo persists. anyone know how to remove it?
Siclight said:
I once had green machine kernel installed, even after a complete wipe and stock kernel install the logo persists. anyone know how to remove it?
Click to expand...
Click to collapse
You must flash a new bootlogo to replace the existing one. This is a good tool for doing so. Good luck
Thanks I'll check it out

[Q&A] [NEW][ROM][ICS][V30A][P920/P925][17/09/2013]OptimusRs JellyCream ROM V3 Final

[Q&A] [NEW][ROM][ICS][V30A][P920/P925][17/09/2013]OptimusRs JellyCream ROM V3 Final
Q&A for [NEW][ROM][ICS][V30A][P920/P925][17/09/2013]OptimusRs JellyCream ROM V3 Final
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NEW][ROM][ICS][V30A][P920/P925][17/09/2013]OptimusRs JellyCream ROM V3 Final. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem
hello, first of all good rom. I wanted to ask for help.
Initially your rom worked perfectly, but from 2 months I have problems with my SD; or better with saving the data on it, both memory have the same problem.
For example, with files downloaded from the browser, when the downloading and, the smartphone does not "detect/ read" the file and I have to necessarily use an APP for re-scan or re-boot to see and use the file at issue.
apparently is a problem writing, because if I try to searching the file with a file browser, the file is present but not readable.
sometimes it also happens with the camera.
until now, I have try to changed the external SD and re-flashing ROM without solving the problem.
I use the Kernel of Shazo
Any suggestions?
thanks you are a big
About background pictures in messages
Hi, yesterday install this ROM, very good job
But can we somehow upload (add or remove) background pictures in messages ? Where i can find them , in which folder ?
Sorry 4 my english Thanks anyway !
Hi, i've a problem. I'm on android 2.3.5 and try all method to upgrade to ice cream. All methods failed. I've always this message: adroid is updated, starting applications. Pzzzz help
Sent from my LG-P920 using XDA Free mobile app
First update to ics v30a/b bevor flashing this. Then install wparks bootloader. After that flash the recovery. Now you are rdy to flash the rom. If you get an security error after flashing make a factory reset...
Sent from my LG-D855 using XDA Free mobile app
Hi guys im new in lg p920 i want use this rom. Can i install this rom for this system?
LG P920
ANDROID 2.3.5 GINGERBREAD
guys i think wk park bootloader prevents device to shutdown it reboots itself what can we do about it ? it is possible to solve , or should i try to live with that bug ?
Pretty good
Thanks for this piece of well done ROM, but i have a little issue, i can't turn on the wifi.. Is that a normal bug or something, it would be awesome if you give me some advice.

[Q&A] [ROM][JellyBean][4.3]Unofficial CM10.2 - 10/27/2013 - Butter - MTD - OC Kernel

[Q&A] [ROM][JellyBean][4.3]Unofficial CM10.2 - 10/27/2013 - Butter - MTD - OC Kernel
Q&A for [ROM][JellyBean][4.3]Unofficial CM10.2 - 10/27/2013 - Butter - MTD - OC Kernel
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][JellyBean][4.3]Unofficial CM10.2 - 10/27/2013 - Butter - MTD - OC Kernel. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
UCLB3_Unbrick_root_1.1. zip file not Available
Hello!
I have an Infuse 4G which is running Android 2.3.6 (Stock), never been rooted before. I made a decision that I want to upgrade it to jellybean, the instructions were easy, but the problem is that The UCLB3 (ODIN ROOT 1.1) file isn't available anywhere thus I can't download it. Can you guys please provide me with the File? As I really wanted to install Jellybean on my device ASAP!
-Asher
Asher687 said:
Hello!
I have an Infuse 4G which is running Android 2.3.6 (Stock), never been rooted before. I made a decision that I want to upgrade it to jellybean, the instructions were easy, but the problem is that The UCLB3 (ODIN ROOT 1.1) file isn't available anywhere thus I can't download it. Can you guys please provide me with the File? As I really wanted to install Jellybean on my device ASAP!
-Asher
Click to expand...
Click to collapse
I got 10.1 in backup for sure, maybe 10.2 but I considered that download corrupt as I could never properly install it. Will dropbox it tonight, so if you don't see a link by midnight UTC drop me a line.
Sent from my LG-D520 using XDA Free mobile app
Update: fulfilled...
https://www.dropbox.com/s/0t9bk8dap8emrah/cm-10.1-20130413-UNOFFICIAL-infuse4g.zip?dl=0
https://www.dropbox.com/s/endssjld1ufr8rj/gapps-jb-20130812-signed.zip?dl=0
Hope this helps.
Error Message "Unfortunately Android Keyboard (AOSP) has stopped."
Hi All!
So about 2 days ago, I upgraded my Infuse 4G To Jellybean using this rom and it worked perfectly. Today I installed the Google apps from the link down below and Installed the package onto my device, It went successful but when the device rebooted I kept getting the keyboard message, I looked on the web people said that try to clear data cache, so i did but that didn't help. I know have a phone without a keyboard, I need help that how can I fix this.
Hope you guys reply ASAP!
~Asher
Asher687 said:
Hi All!
So about 2 days ago, I upgraded my Infuse 4G To Jellybean using this rom and it worked perfectly. Today I installed the Google apps from the link down below and Installed the package onto my device, It went successful but when the device rebooted I kept getting the keyboard message, I looked on the web people said that try to clear data cache, so i did but that didn't help. I know have a phone without a keyboard, I need help that how can I fix this.
Hope you guys reply ASAP!
~Asher
Click to expand...
Click to collapse
You have the wrong GApps installed. Try following one of the suggestions in the link below to get the right Gapps on your phone:
http://forum.xda-developers.com/showthread.php?t=2723807
joel.maxuel said:
You have the wrong GApps installed. Try following one of the suggestions in the link below to get the right Gapps on your phone:
http://forum.xda-developers.com/showthread.php?t=2723807
Click to expand...
Click to collapse
Thanks!
Nice
Your A Life Saver Bro !!!!
---------- Post added at 10:46 AM ---------- Previous post was at 10:39 AM ----------
this new update change the set and look more better thank you
Finally made an account
Just wanted to thank Scott for all his work. My cousin needed a replacement phone & the Infuse w/Scott's ROM is still running slick.

[Q&A] [5.0.2][UNOFFICIAL]crDroid[2015.01.03]

Q&A for [5.0.2][UNOFFICIAL]crDroid[2015.01.03]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [5.0.2][UNOFFICIAL]crDroid[2015.01.03]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can i install it with CWM or Philz?
There's any way to install this ROM with CWM or Philz Recovery? i get error 1 in both of them, and TWRP simply does not work on my XT1032, i get a black screen, i press power after screen suspends and TWRP shows, but touchscreen does not work at all.
Hi everyone I flashed this rom on my XT1032 a week ago and it works perfectly, very smoothy ! Great job and thank you
I'm just having an issue with the GPS : I can activate it but it doesn't work when i try it on maps. Am i the only one with this issue ?
For information I had stock rom before flashing this one.
MY HERO!!!
Could you PLEASE make a 5.0.2 versoin for the gt-p7510. You would make my YEAR!!!
Doubt
So.. is this ROM working fine on xt1033?
without any force close and any other bug?
Same thing here, System ui forced stop.
it works fine on my dual-sim
i want to ask why the sim 2 icon still in the status bar even there's no sim 2?
Flash SuperSU.zip
There is no link for Flash SuperSU.zip...
And does this work for XT1032 US, single sim version?
System Version:
210.12.61.falcon_umts.Retail.en.US
MMS reciving problem
Hi,
today, I've get information about recived MMS, but I can't download it. I have turned WIFI and data transmition. I'm on last 07.02 version my favorite crDroid.
Thanks for help.
Super User Access
Dear Friends,
I liked the work done to bring this cool ROM.
Well that being said, I am stuck with issue with Root Access. I'm not sure how to do that in here. I've tried apps, but those all failed to install bianary.
Kindly help.
Thank you.
working flawlessly on xt1033 dual sim
Using since a week on xt1033 haven't faced a single issue,a perfect daily driver THANKS PeterImmel FOR bringing this for us
Is there a way to read the changelog _whithout_ flashing the rom? I'd like to check what's new before flashing...
When I make textra my default sms app, I don't hear a notification sound when msg arrives.
Whereis the adblock option?
The rom is simple and smooth
the rom is basically the cm12.1 with little modification....
I am using this for quite some time now and this is smooth....
Please try to implement Notification Ticker on this rom

Categories

Resources