Related
Hey guys I really need your help, my phone has been down for the past 3 days now. I followed this guide:http://forum.xda-developers.com/showthread.php?t=547133&page=2. I will state that I am new to the forum so I cannot post on the actual how to, due to rules, or I would have. Basically i have made it all the way thru the guide, to the point where it tells me to:
- press MENU to power off! (do not reboot)
- hold HOME and POWER to boot into recovery mode
- apply update
once I reach there I have no way of resetting the phone so I just pulled battery after it said the cyanogenmod was installed from sdcard. I flashed the splash.nb, but now all that happens is my phone loads up the MyTouch 3g screen freezes for a few min then restarts and goes back into Android System Recovery screen. I really need your help and would be forever great-full if someone could lend me a hand. I will check back regularly.
Thank you very much ahead of time for whoever lends me a hand.
Troubled Guy With Non Working Phone
OP here
Come on guys someone has to have had this problem before. Even if you are sending me to another link who has dealt with this before it will still be a help.
First of all, I'm not familiar with your phone. But I will try to give you a few ideas and see if any of it works for you.
If you have a recovery installed and you have flashed Cyanogenmod, then you are rooted. I'm not sure how your recovery works, but you should have to use the volume buttons & power button to navigate recovery - or something similar. If you can get into recovery, you should be fine.
Go to the wipe menu and wipe cache/dalvik cache. If these weren't wiped properly before flashing, this could be the culprit. There should be an option to reboot, you may have to choose go back a couple times to find it. If that doesn't work, try flashing a different rom. You'll need to wipe everything in recovery (except the SD card) first, then choose "flash zip from SD card".
If your battery is almost dead, don't try flashing anything, just wipe. You'll need to get an external charger or a full battery before flashing anything.
Again, I don't know how your phone works, I have an Evo & pretty much just treated your post as such. It's a start, though. If you can give me more info, I can try to help further.
I also just noticed this is an old method for an old version of the phone. You do have the phone this was made for, correct? Have you tried sending a pm to the OP?
There is most likely an easier, newer way to root, but what's done is done. It also seems like it may be using Amon Ra recovery? If that's the case, that's the recovery I use so I can help you out there. You may also want to look at how to unroot and get your phone back to stock, then start over. I'm going in to work, but if you post back I'll try to help you out as soon as I get the chance.
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
B63M... thats my phone
Henkdrenth said:
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
Click to expand...
Click to collapse
Now that makes us 2 people who owns a B63M and got it from cect-shop.
What I find out about their phones is that it may not easily allow you to perform some insider operations, for instance, maybe its me but I could not find any custom recovery installed and this led to my first issue after I rooted, and installed the ROM manager, I saw the 'fix permission' and clicked it hoping to resolve my force close issues and it asked me to reboot after performing the process but it never got out of the boot, the loop continued, trying to boot into recovery become impossible but somehow a combination got me into a mode where I was able to clear flash and this took me back to a pre factory flash good thing I backed up titanium so I cld restore my apps and upgrade.
Right now I have tried to flash and the screen has gone blank yet the phone is responding to touch as I can hear sounds when the screen is clicked, indicating that its not bricked I just cant see anything going on (this is my current situation and seriously looking for help).
Lastly, I am trying to find out the htc equivalent to this b63m, it looks htc but I cant be sure which of the htc has been more or less cloned... this is going to help with a lot of things if known.
Cheers
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Cect is German
Henkdrenth said:
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Click to expand...
Click to collapse
Yeah thanks, I have also stumbled on the site forum before but I cld not get something out of it, maybe I have not taken time enough to search, I am back on it now and hope I get a solution to the blacked out screen problems I have after flashing.
You know cect-shop is German, they are a German company in China... I am talking to them on skype and hoping they can help me out but they seem pretty busy or cant be bothered because their response is so much delayed or even not at all.
Well technoforum has a special B63M section with all tools required.
They also have nice custom roms like a Cyanogen fork.
I also don't speak Italian, but with the help of Google translate I'm getting pretty far.
But I do let Google translate from Italian to English, that gives me the best result.
Good luck!!
Do you also get no working screen after a reboot with both volume + and power button?
That should get you to the recovery screen without any ROM drivers.
Very correct, no screen even in recovery
When I do the button combination, I believe that it may have responded to my combination for recovery mode but I just cant see anything on the screen, it just remains the same way it was... maybe it graphics issue, as in is the graphics is messed up for some reason or resolution issue, you wont see anything being displayed.
I am just guessing here but all I did was to simply flash an update.zip from sd card.
That is very strange, since flashing a rom does not affect the screen of the recovery boot.
The rom video driver gets only active during the boot process of the rom.
In the past I had some boot problems with my Wildfire start-up that I solved by removing the SIM card and SD card, removed the battery for some minutes and them booted completely resetted.
You could try that, if that does not solve the problem, the only way to wipe the phone back to factory-reset is doing it blind.
After I get my phone I could make a step-by-step guide so you could get to the reset menu...
Another possibility is to re-flash a fresh recovery img to the phone. Since I don't know what was in your update.zip, you could messed up the recovery menue, or even the bootloader.
Re-flashing those could also help and you don. t need the display from the phone, since you use the PC for that.
Here it is
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Waiting on you... I hope my blank screen gets sorted.
balamu96m said:
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Click to expand...
Click to collapse
Ahh thanks man... Ii will wait to hear from you tomorrow, I aim in UK and depending on what time zones you are in but I hope to find you online to connect again.
I hope you have understood my particular issue here tho, the screen if blank even tho the fone seem to be alive and it follows the boot sequence, I can even find it using 'adb devices' command, it just the screen gone blank.
Someone suggested it may be the boot.img but I dont know about that.
Cheers
I'm from India - Local time here is GMT+5:30......!!
So, here you go !!
B63M= MTK6573 + 650mhz + Android 2.3
So, one modded recovery.img can't be used for every B63M.......this is because a different B63M phone will have a different recovery.img..........(hope u understand)
Backing up everything:
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from HERE and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
Here i need two files.One is recovery.img and the other is firmware.info.
If you give both, i can port one for your phone !! Also mention your phone's model name/number because, without that it is not possible.
xdadeem said:
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
HTML:
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
Click to expand...
Click to collapse
That was the problem, you flashed only the update, not a complete Rom.
I suggest you make a complete re-flash vorm scratch, so refash a fresh recovery.img and re-flash als a new Rom.
You can vind one at technoforum' as earlier mentioned
I thot you shd read my latest.
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Great to hear that you have visual again!
You still have root yes?
The golight rom from technoforum is a good one.
I expect mine any moment now so I can customize mine too.
Good luck!
xdadeem said:
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Click to expand...
Click to collapse
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
It was always so
balamu96m said:
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
Click to expand...
Click to collapse
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
xdadeem said:
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
Click to expand...
Click to collapse
Now, is the recovery working??
Does the phone boot properly??
Wrong section. Moving to general.
YES and NO
balamu96m said:
Now, is the recovery working??
Does the phone boot properly??
Click to expand...
Click to collapse
After many troubles, I found a mod for w690 which is the build version of my phone, I could not boot to recovery so used flashtool and when I load the scatter text of the one I found, it automatically load in every item on the list including recovery and boot img , etc, so I flashed these to my phone... and for the first time I was back in how the phone came to me,
Gingerbread has now returned to 2.3.5.
One thing I have noticed is that the phone freezes on me and then reboots?
I still cannot boot into recovery, I tried this again using mobileuncle tools...
It seem that I have flashed my phone which is good, but I was unable to wipe cache because I could not boot into recovery to do this which may be the source of the current freeze and reboot.
Can I solve this using the mobileuncle or what can I do to wipe cache, if that is the problem
Well, received mine, rooted it an flashed a new recovery from technoforum using myuncletools.
All went well, so I suggest you do also a fres re-flash with a proper recovery.
Hope that should solve your problem.
Edit: moved from my tablet to my PC to look for the link of a correct recoveryfile for you.
First, load this recovery.
Unpack it and put the content to the root of your SD card.
Use myuncletools to flash this recovery.
Now you should have a usable custom recovery that allows you to factory-reset and wipe your phone
Install a fresh rom
How to? Look here
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Kopiok said:
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Click to expand...
Click to collapse
Try the solution in the last few posts on this thread. http://forum.xda-developers.com/showthread.php?t=2465695
I hope you get more knowledgeable advice than mine but, were I in your situation, my primary goal would be to get back to STOCK. Forget CM and modding for now. Either through TWRP or through the recovery settings on the phone itself I'd get to where I could do a factory reset. If you're continuously able to boot into TWRP I don't see how your phone could be bricked. My experience is, if I can get a phone to do ANYTHING I've got a shot at figuring out how to get out of whatever mess I've created. I don't know if this could be a factor but I'd put in a different micro SD card too, in case there's something on the card you've got in there.
Just an update. So, I got it to go back to fastboot this morning and I tried using the Razr Utility to flash back stock and stock recovery, but I got a "Failed" line with the reason "Remote Failure". Not sure what that's about. When it reset it got back to the Cyanogenmod boot graphic, but it never started. I left it there for a good 12 minutes.
Right now it's sitting in TWRP. I'm going to let it charge to 100% (it was a little less when I tried all of this) and attempt it again at 100% battery. Thanks for the help so far!
So, I tried using the Razr Utility to flash the system, kernel, radio and for system it was unsuccessful (something about too many threads or strings, something to that effect), but the rest said OK. Now my phone doesn't seem to turn on. My computer still makes the device plugged in sound when it's plugged/unplugged, but I cannot get the screen to show anything or seem to turn on the phone.
Is this it? Is it... bricked!? ;-;
Edit: I ordered the Factory Adapter as a last resort sort of thing. This is lame.
Edit Edit: I've seen the boot logo since my last edit! But... it's not coming back and I still can't even bring up the bootloader. I don't know why it will sometimes turn on or sometimes not. In any case, I'm now hopeful that not ALL is lost.
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
That's the plan! One odd thing happening now... My phone's screen isn't showing anything, so I assumed it was off. I left it unplugged and went to see a movie..... and the phone is still warm. This leads me to believe the phone is still drawing power, for some reason... God this is weird. I'll wait for the adapter and try again. Thanks for the help!
cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
according to the packaging on mine from tbh a chinaman made it, just sayin
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
cellzealot said:
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
Click to expand...
Click to collapse
thanks for making it either way, better to have and not need.
havent had to use it so far
bweN diorD said:
thanks for making it either way, better to have and not need.
havent had to use it so far
Click to expand...
Click to collapse
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
cellzealot said:
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
Click to expand...
Click to collapse
how many thousands, and whats the plan?
I got the Factory Adapter and used RSD Lite to flash stock. And it works! Yay! It's starting up reliably and everything.
Except... it won't start up without the cable attached, and the battery icon has a big question mark on it. It also won't connect to the cell network (but does connect to WiFi). What do I do now?
Edit: So I noticed that while the battery status said "Unknown", it did go from 2% to 3% charge level when I plugged it in normally for a little. My plan at the moment is to try leaving it plugged in for a while and then try taking the OTA update to see if that fixes everything. Good plan?
Edit Edit: Never mind! I just had to let it charge for a bit. It seems to be back in working order, now! Thank you so much for all the help everyone!
That is exactly what is supposed to happen. Congrats on fixing your phone!
The factory cable/adapter does not charge the device but powers it directly, allowing it to boot no matter what state the battery is in or even without a battery at all.
You cannot charge in bootloader, which is why the cable/adapter is so valuable. Once the device can boot/charge normally then you are all set.
Hi everyone,
I'm hoping that someone can help me out with my device. I have a rooted sm-p900 that was working fine until a month ago when I tried to flash [ROM][7.1.x|SM-P900| Unofficial LineageOS 14.1 (v1awifi). I was busy multi-tasking and made the stupid mistake of flashing the rom before updating the BL. Since trying to do so, I have not been able to get past the first screen that says "Samsung sm-p900" . After the logo disappears, my screen remains lit but is just black.I could not restore my backup after either.
Where I am now:
- I can still access and use T.W.R.P. (latest 3.1.1) (If TWRP is left alone for too long, the device will reset to the same black screen and hang forever. If flashing a rom is taking long, the device will restart mid-flash as well.)
- I can still access download mode and use odin as well.
- I have since flashed the appropriate BL but that has not changed anything.
-I have tried clean flashing a magnitude of different roms and still come across the same problem.
I honestly have no idea how I can fix the device and have tried everything I know how. I would love to get it back as soon as possible. Any help is greatly appreciated, so thank you in advance!
jp2572 said:
Hi everyone,
I'm hoping that someone can help me out with my device. I have a rooted sm-p900 that was working fine until a month ago when I tried to flash [ROM][7.1.x|SM-P900| Unofficial LineageOS 14.1 (v1awifi). I was busy multi-tasking and made the stupid mistake of flashing the rom before updating the BL. Since trying to do so, I have not been able to get past the first screen that says "Samsung sm-p900" . After the logo disappears, my screen remains lit but is just black.I could not restore my backup after either.
Where I am now:
- I can still access and use T.W.R.P. (latest 3.1.1) (If TWRP is left alone for too long, the device will reset to the same black screen and hang forever. If flashing a rom is taking long, the device will restart mid-flash as well.)
- I can still access download mode and use odin as well.
- I have since flashed the appropriate BL but that has not changed anything.
-I have tried clean flashing a magnitude of different roms and still come across the same problem.
I honestly have no idea how I can fix the device and have tried everything I know how. I would love to get it back as soon as possible. Any help is greatly appreciated, so thank you in advance!
Click to expand...
Click to collapse
Have you tried taking it completely back to stock via Samsung Kies on your PC?
Sorry I don't have complete details, but it goes something like this (and if you search this site or Google, you'll find a good write-up on how to do a complete recovery using Kies):
1. If you can, make a backup using TWRP - if not, you are going to lose everything because of the next steps
2. Download and install the Kies software from the Samsung site and install it on your PC (I grabbed both versions, can install both on the same PC at the same time)
Make sure that it installs the Samsung USB driver
3. Connect to the tablet using the OEM cable - if you get a reaction from Kies, great
4. Somewhere in the Kies menu, you can tell it to do a complete recovery, including bootloader- if I remember correctly, you'll need your serial number (Sorry, been 18 months since I did just about the same thing and was able to recover it from my FUBAR, and I no longer run Windows so I can't step thru it)
It will go through downloading and flashing your tablet back to the state it was when you pulled it out of the box.
If you get to that point, you will have to go the whole route (including loading TWRP) to get it back to Lineage. It took me about two weeks to get it back to the way I had it before I was flashing and reading a book and talking to my wife all at the same time and didn't pay attention to what I touched on screen.
I apologize for the rambling and not having definitive statements, but I'm drugged up and been awake for the last 36 hours, and at my age that isn't a good combination.
Thank you so much for your help! I couldn't end up using that method because kies would not recognize my device for anything. It did get me inspired to try fixing it again however and it worked!
If anyone ever encounters the same or a similar problem, I just tried re-rooting it using odin and cf's autoroot file. It allowed me to be able to install roms again.
rhricik447 said:
Have you tried taking it completely back to stock via Samsung Kies on your PC?
Sorry I don't have complete details, but it goes something like this (and if you search this site or Google, you'll find a good write-up on how to do a complete recovery using Kies):
1. If you can, make a backup using TWRP - if not, you are going to lose everything because of the next steps
2. Download and install the Kies software from the Samsung site and install it on your PC (I grabbed both versions, can install both on the same PC at the same time)
Make sure that it installs the Samsung USB driver
3. Connect to the tablet using the OEM cable - if you get a reaction from Kies, great
4. Somewhere in the Kies menu, you can tell it to do a complete recovery, including bootloader- if I remember correctly, you'll need your serial number (Sorry, been 18 months since I did just about the same thing and was able to recover it from my FUBAR, and I no longer run Windows so I can't step thru it)
It will go through downloading and flashing your tablet back to the state it was when you pulled it out of the box.
If you get to that point, you will have to go the whole route (including loading TWRP) to get it back to Lineage. It took me about two weeks to get it back to the way I had it before I was flashing and reading a book and talking to my wife all at the same time and didn't pay attention to what I touched on screen.
I apologize for the rambling and not having definitive statements, but I'm drugged up and been awake for the last 36 hours, and at my age that isn't a good combination.
Click to expand...
Click to collapse
Try updating the bootloader again using odin
When this has happend factory reset
Flash the rom, addonsu and gapps in the same TWRP session
The rom should work then, I've been happily using it for about 6months now
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
J727P
Nupid Stoob said:
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
Click to expand...
Click to collapse
ok you have an older phone the J700P you can start by downloading odin an twrp recovery an superSU zip you can get twrp from here !https://twrp.me/devices/samsunggalaxyj72015qcomsprint.html
an odin from here
https://mega.nz/#!nYVDXBAC!_cTWbW4_Ow8sZMWcZvO7bVwEEBFlD1DQsB5NeFhj1EY
An just google latest superSU zip to find that !
good luck !
step 1 enable oem in development settings !
step 2 put phone into download mod an flash twrp then boot into twrp recovery an flash superSU zip !
Thank you for the info. I'm presently confused. Here's what I've done:
I ran Odin and flashed with twrp-3.2.1-0-j7ltespr.img.tar. It went through successfully going off odin's message.
Vol. up + home + power. It'll eventually show a yellow triangle with the white trash can guy on it's side stating "No Command". Power + up gets the Android Recovery screen.
At this point, am I supposed to choose the Wipe Data/factory reset option? I see tuts that seem suggest I should already be in the twrp UI or something. I've tried watching vids and looking at a handful of tuts, but either they are the wrong phone, too old, the button combos show something else entirely, etc.
Thanks!
Anyone? Videos show the buttons vol. up + home + power as booting right into twrp recovery gui. For me, it's going into "Android Recovery" screen. Is there an extra step with Odin or something that I missed? Or am I supposed to wipe/boot in the Android Recovery screen and it'll boot the twrp recovery gui? If bricking something I'm not familiar with wasn't a concern, I'd be courageous with it.
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
J700P
Nupid Stoob said:
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
Click to expand...
Click to collapse
Ok when flashing twrp with Odin first uncheck auto reboot in options flash twrp pull battery replace battery an boot into twrp an flash superSU zip then reboot system !
Thank you so much Peter! That did the trick THANK YOU :good:
For posterity to anyone else w/limited root knowledge with a SM-J700P Virgin variant running 7.1.1 (and what was most recent factory updates until this point); Flashed the twrp-3.2.1-0-j7ltespr.img.tar again w/o auto reboot in options of Odin, pulled battery once safe (i.e. you get the "Pass" message from Odin confirming everything went as planned) to get out of the downloading screen, replaced battery, booted the recovery (vol up + power + home) and it finally booted into the twrp recovery gui. Selected the "Install" option, then went to where the supersu.zip was stored on the SD (I created a separate "supersu" folder via PC connection for easy locating; internal phone memory card looks to now be unlocked, so can most likely use that if you don't have a SD card). Checked the "reboot once installed option" in the gui box and swiped to install supersu,zip and verified it was rooted via app after phone fully booted back up.
BTW, If anyone gets a hang/crash in Odin immediately after trying to select a twrp tar image in the "AP" box, try downloading the twrp image via PC instead of the through the phone (the legit twrp site that has the repository of past/current .tar), and just put it somewhere like Odin folder on desktop. Somehow, mine were getting corrupted via phone download through the twrp app, and Odin would NOT recognize the file was bad/corrupt when trying to select it via the AP box and hangs instead of giving a warning message. I ran into this earlier on then noticed the file was too small for some reason after viewing it on my PC, hence the Odin hang that needed a task manager kill.
I hate to necro an old thread but I still do not want to create an entire new topic for a single question. If I was to follow this info will it wipe the phone or will it simply root it while keeping all data on the phone? I ask as it is my wife's old phone and she would be pissed if I wiped her apps and everything on accident since she wont be able to remember what she had.
Edit: also when I add the TWRP file to odin it immediately hang/crashes like OP mentions but I am already DLing via pc. any thoughts?