I have the tf300t unlocked rooted until i updated to the jelly bean update 10.4.2.17 than i decided to flash TWRP again via fastboot and flashed su.zip
Made a backup and trying to flash black bean and hydro bean ROMs can't get passed the Asus splash screen can't even restore my backups either i even tried the newest CWM touch recovery with same results the only way i can get this thing working again by flashing the system blob file in fastboot than yesterday i did the same thing with the newest Twrp update same results after trying to install a custom ROM i have tried searching answer same why i found how to flash the system blob to restore the soft brick but for the life of me I can't find any answers. This is all new for me after using Odin for the galaxy phones and fastboot for the Gnex any information i would be greatly appreciated!
Sent from my Galaxy Nexus using xda premium
larryv1979 said:
I have the tf300t unlocked rooted until i updated to the jelly bean update 10.4.2.17 than i decided to flash TWRP again via fastboot and flashed su.zip
Made a backup and trying to flash black bean and hydro bean ROMs can't get passed the Asus splash screen can't even restore my backups either i even tried the newest CWM touch recovery with same results the only way i can get this thing working again by flashing the system blob file in fastboot than yesterday i did the same thing with the newest Twrp update same results after trying to install a custom ROM i have tried searching answer same why i found how to flash the system blob to restore the soft brick but for the life of me I can't find any answers. This is all new for me after using Odin for the galaxy phones and fastboot for the Gnex any information i would be greatly appreciated!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
It's really simple. With the new kernel and firmware (10.4.2.17) there is no way.
You must wait an update for the recoveries
Thank you for the info and my understanding you can't flash older firmware right? For a compatible recovery?
Sent from my Galaxy Nexus using xda premium
I rooted my GNote 10.1 with zedomax's method, including flashing CWM recovery and had no issues with it. I wanted to upgrade to JB, and was going to try CM10, but when I tried to flash the .zip file through CWM, it gives me an error message. I have included a screenshot of the error message if it will help.
I know it's not an official CWM, but I'm reading how others have done this and wondered if I somehow made a mistake. I've never had a problem flashing any other phone, and I don't know where to go from here.
There may be a different way but i fixed that problem by using TWRP which i got in a thread from in the development section. It flashed with no problems. Im not sure what the issue but try a different custom recovery.
Sent from my GT-N8013 using Tapatalk 2
Had this issue also. Flashing from twrp did the trick. So once rooted, twrp installs through goo manager, which is here:
https://play.google.com/store/apps/details?id=com.s0up.goomanager
Read up on the twrp thread in android original development. The touch pad is a little dodgy, but it's workable.
Sent from my GT-N8013 using XDA Premium HD app
suspect_device said:
I rooted my GNote 10.1 with zedomax's method, including flashing CWM recovery and had no issues with it. I wanted to upgrade to JB, and was going to try CM10, but when I tried to flash the .zip file through CWM, it gives me an error message. I have included a screenshot of the error message if it will help.
I know it's not an official CWM, but I'm reading how others have done this and wondered if I somehow made a mistake. I've never had a problem flashing any other phone, and I don't know where to go from here.
Click to expand...
Click to collapse
Here's a flashable CWM from source:
http://db.tt/huUWk7Ty
This may help a bit. I found this somewhere on the web but I can't seem to find it again.
Recently flashed Slimbean 4.3 built 1.
After that I observed that I lost my ROOT.
Then I went to download mode and tried to ROOT, but that failed and displays a problem with Supersu.
I tried to figure out, but haven't got any solution.
Need help.
My device: Tab 2 p3100
Sent from my GT-P3100 using XDA Premium 4 mobile app
Same Here
itsmepawan said:
Recently flashed Slimbean 4.3 built 1.
After that I observed that I lost my ROOT.
Then I went to download mode and tried to ROOT, but that failed and displays a problem with Supersu.
I tried to figure out, but haven't got any solution.
Need help.
My device: Tab 2 p3100
Sent from my GT-P3100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The same thing happened to me. I flashed Mokee 4.3 , but I just found carbon 4.3 for my gs3. flashed that on my phone, now I wanted to put carbon on my GT-P5113. No Root, tried using Odin to root my tab with the same file I auto rooted my tab with. It looks like it works. cycles through just like It should. on boot up, it says updating apps 1 of 112... until 112 of 112... then it boots up normally. Go to unlock screen, open Joey Krim Root Checker. No root access. It's just strange... It's like I can't Root it again, and I can't install TWRP or CM Recovery.
Revamp69 said:
The same thing happened to me. I flashed Mokee 4.3 , but I just found carbon 4.3 for my gs3. flashed that on my phone, now I wanted to put carbon on my GT-P5113. No Root, tried using Odin to root my tab with the same file I auto rooted my tab with. It looks like it works. cycles through just like It should. on boot up, it says updating apps 1 of 112... until 112 of 112... then it boots up normally. Go to unlock screen, open Joey Krim Root Checker. No root access. It's just strange... It's like I can't Root it again, and I can't install TWRP or CM Recovery.
Click to expand...
Click to collapse
My CMW recovery is working fine, I have problem with Root access and Supersu. So far tried few methods but not succeeded so far.
Sent from my GT-P3100 using XDA Premium 4 mobile app
*awesome title here*
Most ROM have a opting in the developers options . to get root access all you have to do is select apps and ADB
Issue Solved:
I tried to read about supersu little bit on forum and found that
Supersu.zip v1.60 is working fine on many custom Roms running 4.3
*So I download that zip file.
*Went to recovery
*Wiped data,cache and dalvik cache
*Installed that zip file of supersu and reebooted
After reboot I opened the supersu app and all was working fine.
Thanks !!
Sent from my GT-P3100 using XDA Premium 4 mobile app
I solved my issue too. Had to download and install TWRP. After that, I had no problems.
Sent from my GT-P5110 using xda app-developers app
Hello!
I have Galaxy Tab 2 10.1.
That's the "evolution line" : Stock 4.0.4 => 4.2.2 (France) with Odin => root with Odin => ROM Cyanongenmod 10.1.3 => 4.2.2 (France) by clockworkmod recovery => Dhollmen 4.3 ROM. That's full list of things i had done with my tablet.
Problem: I can't do hard reset. CWM says all right, it's complete, after reboot all looks deleted, BUT all data can be found when i connect tablet to PC and browse files (or use Root Browser).
Also i can't clear apps cache in user interface and can't clear cache and dalvik cache in CWM.
I'm pretty new to android, rooted my first device (Galaxy s3) 1 month ago.
Help me please!
Doidik said:
Hello!
I have Galaxy Tab 2 10.1.
That's the "evolution line" : Stock 4.0.4 => 4.2.2 (France) with Odin => root with Odin => ROM Cyanongenmod 10.1.3 => 4.2.2 (France) by clockworkmod recovery => Dhollmen 4.3 ROM. That's full list of things i had done with my tablet.
Problem: I can't do hard reset. CWM says all right, it's complete, after reboot all looks deleted, BUT all data can be found when i connect tablet to PC and browse files (or use Root Browser).
Also i can't clear apps cache in user interface and can't clear cache and dalvik cache in CWM.
I'm pretty new to android, rooted my first device (Galaxy s3) 1 month ago.
Help me please!
Click to expand...
Click to collapse
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
R1V3R0 said:
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Thank you, i'll try it now!
R1V3R0 said:
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Installed TWRP, thanks! :laugh:
All is working!
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
- Rooted it using the following guide (it now has ICS)
- SIM Unlocked it using the following guide (now it works on other networks)
- Updated to CWM 6.0.3.8, since JB roms needs it
- Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
TINGEA said:
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
-Rooted it using the following guide (it now has ICS)
-SIM Unlocked it using the following guide (now it works on other networks)
-Updated to CWM 6.0.3.8, since JB roms needs it
-Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
Click to expand...
Click to collapse
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
TINGEA said:
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
Click to expand...
Click to collapse
No boot loaders man. This is before Samsung's complications.
Recovery is here.
http://d-h.st/AFu
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Somcom3X said:
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Click to expand...
Click to collapse
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
BTW - when I was flashing via Odin my upload phone screen was showing that I have a custom rom and the counter was 1.... do I need to fix that?
TINGEA said:
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
Click to expand...
Click to collapse
SOLUTION:
The reason your stock recovery system keeps getting overwritten at Android startup is because of a script that is being run.* All you need to do is either rename this script or simply delete it.
Please keep in mind that if you restore your stock ROM, this script will be restored with it so you will have to rename or delete it again.* Do the following:*
1.
Make sure your device is powered on and running normally,
2.
Make sure you have rooted your device and that you have all of the necessary permissions in order to manipulate system files.*
3.
In the root file system go to \system\etc
4.
Find the file named install-recovery.sh and either rename it or, as I did, delete it.*
That’s all there is to it.*
Please keep in mind that you will need to flash your custom system recovery one more time after modifying the script file.* After that, reboot away and you will always be able to get back into your new system recovery.
Good Luck and Happy Tweaking.
Click to expand...
Click to collapse
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but I'm not sure this is needed for my case. I read the original blog post and my recovery does not get overwritten. I actually rebooted multiple times into CWM recovery and each time it is the same 6.0.4.4.
I also went into the /system/etc folder and there is no install_recovery.sh file.
to clarify, here is where I'm stuck now:
- when I use CWM 6.0.3.8 CM install completes successfully, but then CM will not boot, and will keep on cycling on the boot logo screen.
- when I use CWM 6.0.4.4 I can't start to install CM as it complained that my phone is not t769.
in all cases I'm using CM 10.2 nightly for T769.
Thanks for the help.
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but this is more trouble than what I wanted to put in - I'll stick with the rooted stock ROM I have. I was hoping the process was a little more straight forward, similar to my SGS3.
thanks for all your help thus far!
Somcom3X said:
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
TINGEA said:
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
Click to expand...
Click to collapse
Hmm. Go back to stock ics, flash a 10.2 recovery, then flash whatever you desire.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It would be cwm 6.0.2.7
You can flash the img through a zip or by terminal on the phone.
Odin needs a tar'd recovery img
Sorry been very busy.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2577265
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
TINGEA said:
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
Click to expand...
Click to collapse
I'm very sorry for the delay. Been very very busy.
https://www.dropbox.com/s/awp1zy4u3x34a2v/CWM-cm-10.2-Recovery-t769.zip
That is my personal 10.2 recovery. Works fine for me.
The author is me, but I was too lazy to change the lines.
Sent from my SAMSUNG-SGH-T769 using Tapatalk