I need to flash stock bootloader to Thinkpad, or in other words, I can't boot to recovery mode, I searched the forum and tried many methods from it but couldn't find a solution,
can any one help me in this?
the problem is: when I power on my TPT it shows a white Lenovo logo on the screen, and a message: "Booting Kernel Recovery Image" on the upper left corner.
but nothing happens, it power down after few seconds.
I tried flashing 04.EBT.img using nvflash but it always fails.
thanks
Hi,
Best to ask the experts in your device section for help,
> Lenovo Thinkpad Tablet > Thinkpad Tablet General
Good luck!
Thank you. Thread closed.
Related
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Greetings experts
I tried to flash ROM into my Lenovo IdeaTab A8-50 (A5500-F) using FLASHIFY.
Tablet since not turn on.
Continue only constant reboots.
I'll get through POWER + VolumeUp in BOOT menu
If you select RECOVERY MODE will only restarts
Same with the election NORMAL BOOT
The only thing that seems functionally option is Fastboot Mode
I downloaded the ROM
a5500f_a442_000_013_140526_row.rar
from the Russians that should belong to my tablet, and I tried to install the program SPFlashTool,
But I do not know how to do this, if I can not turn on the tablet.
Drivers for USB I have installed (win7-64b, ADB Driver Installer.exe)
Thank you for any help.
Google translator you apologizes for using poor English, I hope that everything is clear.
Hi,
It sounds like a stuck power button to me. You may need a service center to fix it, or yourself. But trying to flash anything is extremely risky... If it reboots in the middle, your device could be ruined.
You can ask for other opinions here if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you, I thought rather do FLASH off or in Fastboot Mode?
Hello I'm in trouble with my boot loader.. my fastboot or droidboot got corrupted. My adb is working on debugging mode when the phone is on. Tried to downgrade/upgrade but everything fails when the phone reboots and looks for bootloader and shows usb icon with white bar... nothing happens .shows command line " waiting for devices" on my Windows pc.Please help me to put. Back my droidboot and bootloader ..my phone is Asus zenfone 5 a501cg .
SO PLEASE DONT SUGGest ME WITH FASTBOOT COMMANDS AND FASTBOOT Menu or Droidboot menu (power + up volume button)& ( power + down volume button) for TWRP recovery.Please someone help me...Power + up volume shows USB icon with white bar..?
chriszx12 said:
Hello I'm in trouble with my boot loader.. my fastboot or droidboot got corrupted. My adb is working on debugging mode when the phone is on. Tried to downgrade/upgrade but everything fails when the phone reboots and looks for bootloader and shows usb icon with white bar... nothing happens .shows command line " waiting for devices" on my Windows pc.Please help me to put. Back my droidboot and bootloader ..my phone is Asus zenfone 5 a501cg .
SO PLEASE DONT SUGGest ME WITH FASTBOOT COMMANDS AND FASTBOOT Menu or Droidboot menu (power + up volume button)& ( power + down volume button) for TWRP recovery.Please someone help me...Power + up volume shows USB icon with white bar..?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble but We cannot provide technical support nor can other members reply to your posts here on XDA Assist. There is no forum specifically for the Asus zenfone 5 a501cg at this time but I suggest that you ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. I also see a number of references to your model from a site search at http://forum.xda-developers.com/sitesearch.php?q=Asus zenfone 5 a501cg which might be worth reviewing.
I see that you already posted an identical thread at http://forum.xda-developers.com/chef-central/android/corrupt-droidboot-bootloader-update-t3195442. Please be patient and give the experts plenty of time to respond.
Good luck!
This thread is closed.
Hello great people, I have one problem with my GoClever Orion 70L tablet.
I forgot screen unlock password, so I tried to flash new firmware which I downloaded from official GoClever website.
I flashed it with PhoenixSuit, and everything goes fine, flashing was successful.
When I tried to power on the tablet, it keep stucking on GoClever boot logo.
I tried to flash it again and again with PhoenixSuit, and it is always successful, but every time it's stucking on the boot logo.
The tablet don't have volume+ and volume- buttons, so I don't know how to go into recovery mode, but maybe I don't need to.
It have just Home and Power button.
I hope somebody here can help me with this problem. Thanks!
kuzmvnovic said:
Hello great people, I have one problem with my GoClever Orion 70L tablet.
I forgot screen unlock password, so I tried to flash new firmware which I downloaded from official GoClever website.
I flashed it with PhoenixSuit, and everything goes fine, flashing was successful.
When I tried to power on the tablet, it keep stucking on GoClever boot logo.
I tried to flash it again and again with PhoenixSuit, and it is always successful, but every time it's stucking on the boot logo.
The tablet don't have volume+ and volume- buttons, so I don't know how to go into recovery mode, but maybe I don't need to.
It have just Home and Power button.
I hope somebody here can help me with this problem. Thanks!
Click to expand...
Click to collapse
Hi and welcome to XDA.
I couldn't find much information about your device here. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly]. Experts there may be able to help you.
Good luck
Hello everyone,
Many thanks for taking the time to read about my problem. I have a ZTE Blade S6 phone and for some reason, it does not bootup properly. I would like to know if it is possible to use ADB commands to copy files from it? Also, what drivers am I missing?
This is the current situation - When I power it on, the ZTE logo shows up with a white background and it is stuck on that forever, I have let it stay that for more than 8 hours and no luck. Have tried the following already:
1. Volume+ and Power button to load into "recovery" mode and tried to wipe cache partition and reset to factot reset - No change and the problem still remains
2. Tried selecting the "bootloader" option, and the screen goes blank. However, on Windows PC it does detect a usb device however I am not sure if it is supposed to show as "Kedacom USB Device" - "Android Bootloader Interface". I tried another Samsung Android device and it does show up on the devices list under the "Android" section.
Could you please help me to restore the Official ROM so that my phone can be used again? ADB command does not seem to detect the device and so I am not sure what I am doing wrong. It will be really helpful to get some advice. Thanks again.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist