Help Me this firware for Note 3 china brick
can any body help me firware for that phone :
Model Number : SM-N9000Model: Galaxy Note3
SSN: note3GSMH
Rated: 3.7v
FCCID: A3Lnote3
CPU: armv7 1000Mhz
Display: 854 x 480; DPI: 240
GPU: Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
Ram: 256Mb
Front camera: 1.9
Back camera: 1.9
Rom: 2.3.5
Android Version : 4.2.9
Baseband Version : MTK6589
Kernel Version : 2.6.35.7
Software Version : SM-N9000-V1.0
Hardware Version : 1.1.0
ram: 230 mb
Hi,
You have a dedicated forum for that device, so you must start ask/read there for more relevant answers:
> Samsung Galaxy Note 3 > Galaxy Note 3 Q&A, Help & Troubleshooting
Good luck
Thread closed and completed. Thank you
Related
Hi,
I'm new here. I need new rom for my phone. This phone wifi very poor, cannot go to playstore. GPS and alot problem.
Phone Model : Galaxy S4
Phone Brand: SPRD
CPU Model: Dual Core ArmV7 Processor rev1
CPU Frequency : 1024
CPU Manufacturers : MT6589
Andriod : 4.2.2
Version MocorDriod 4.2.2.W12.20_p20.01
Kernal : 2.6.35.7 [email protected]
Screen: 480 x 854
Software Version : JDQ39.I9500ZSUAMDF
Hi to all,
good day, im new here. and im new to my samsung galaxy note3 clone. i bought my phone with 32gb storage then the problem appears after i do a factory date reset. my internal storage says total space of 1.27gb and sd card 1.26gb but i didnt insert any micro sd card because my phone not mounting my micro sd card. i tried my micro sd card to other original samsung phone and its working properly. and when im check file manager it says "sd card available 15.87gb / total space 16.36gb
im not aware if my device is already rooted or not.
when i boot it it says samsung galaxy note 3 sm-n900
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
please help me with my internal storage problem.
thanks in advance
Hi there,
I'm not sure for help from the Note 3 owners, and I think you must ask for that in this forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Have anyone tried to root the iView M6?
There's no information on rooting regarding this model.
SUMMARY
Device: Alps M6
Android: 4.4.2
Processor: MT8382
CPU Cores: 4
CPU Max Frequency: 1300 Mhz
GPU: ARM Mali-400 MP
System RAM: 963 MB
Display: 540x960 (5.1")
Main Camera: 5 Megapixels
SYSTEM
Model: M6
Manufacturer: Alps
Android: 4.4.2
API Level: 19
Kernel: 3.4.67(eng.xnq.1415600571)
Compilation: MT83X2_IVIEW_M6.2014111014
Google Apis: Active
I can post the full stats I got if you need me to
Thanks!
Hi there,
You can try one of the generic root methods at the top of the list here:
XDA Root Directory
If that doesn't help, you will need to ask for help here :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
HI... First of all I'm sorry for my english, and I noobie in this forum. PIease help me, i need a firmware or a custom rom which is suitable for my child hardbrick tablet.
This is specification :
models: mfc142f
os: android 4.1.1
Processor: 1GHz
ROM: 4 GB
RAM: 512 MB
LCD: CAPACITIF 7 "resolution: 800 x 480
WIFI: 802.11 b / g / n
dual camera 0.3 MP, front and back
abi: armeabi-V7A
abi2: armeabi
board products: rk2928sdk
manufacturers: rockchip
building description: rk2928sdk_eng 4.1.1 JRO03H 20,130,930.160150 release_keys.
please help me...
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Click to expand...
Click to collapse
Greetings and welcome to xda. There doesn't appear to be any custom rom for your device but if you ask your question here
http://forum.xda-developers.com/android/help
the experts there maybe able to help you
Good Luck
Sawdoctor