Database Info

[Q] how to flash - really in trouble

Hi all,
Apology if this questions may already been ask millions of time but I am really stucked at the moment and hoping that someone may guide me to the correct direction.
I have got HTC One X-LTE (Evita)
I managed to get S-OFF and also CID - 111111
It has TWRP 2.6
The last time I got it working was on the STOCK 4.2.2 I downloaded from the XDA - then I got into the issues of rebooting and loosing signal from time to time. so I went into my TWRP backup I had and reflashed it using my old backup made from my TWRP.
the reflashed failed and now I can only boot up to the HTC logo and then black screen.
I can get to the TWRP recovery and I have got fastboot and ADB on my PC.
When I run the fastboot devices command --> it shows device connected BUT when i try ADB command ---> no device is found.
It will be much appreciated if someone can guide me to the right direction as I am really stucked at the moment not sure where to start.
I tried searching in the forum but I don't think I went to the correct area/tutorial.
Please help
Thank you

When you made your twrp backup did you select system,data, and boot? If it's hanging at the HTC screen it seems there is not boot.img installed or one that is incompatible with your backup. Open whatever Rom your backup is made from and copy the boot.img to your fastboot directory. Then reboot the phone into fastboot mode and flash the boot.img using this command.
Fastboot flash boot boot.img
Then reboot the phone and see what happens
Sent from my HTC One XL using Xparent Red Tapatalk 2

ImagioX1 said:
When you made your twrp backup did you select system,data, and boot? If it's hanging at the HTC screen it seems there is not boot.img installed or one that is incompatible with your backup. Open whatever Rom your backup is made from and copy the boot.img to your fastboot directory. Then reboot the phone into fastboot mode and flash the boot.img using this command.
Fastboot flash boot boot.img
Then reboot the phone and see what happens
Sent from my HTC One XL using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply.
When looking at the TWRP backup I copied into my PC - does not have the .img - the one I can find is MD5
Can I use the existing ROM I donwload from XDA like : EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip
when I extracted EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip - I can see the "boot.img" can I use this one?
Thanks

ardabelati said:
Thanks for the reply.
When looking at the TWRP backup I copied into my PC - does not have the .img - the one I can find is MD5
Can I use the existing ROM I donwload from XDA like : EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip
when I extracted EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip - I can see the "boot.img" can I use this one?
Thanks
Click to expand...
Click to collapse
I had a somewhat similar experience with Viper 4.0 ROM - I managed to get Cyanogenmod installed correctly (particularly this one). Take a shot and see if it works - atleast your phone will be up and working.

sandys1 said:
I had a somewhat similar experience with Viper 4.0 ROM - I managed to get Cyanogenmod installed correctly (particularly this one). Take a shot and see if it works - atleast your phone will be up and working.
Click to expand...
Click to collapse
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers

ardabelati said:
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers
Click to expand...
Click to collapse
hmm - Im on ROM dated 09/13, which is not present now. Your best bet would be http://get.cm/get/aOM
Also remember to flash Google Apps (play store, etc.) which is packaged separately here - http://goo.im/gapps/gapps-jb-20130813-signed.zip

ardabelati said:
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers
Click to expand...
Click to collapse
Did it work finally ?

sandys1 said:
Did it work finally ?
Click to expand...
Click to collapse
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again

ardabelati said:
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again
Click to expand...
Click to collapse
It sounds like it might be a bad download or something. I noticed u never mentioned wiping the phone before flashing, Are u clean wiping? And also what hboot are you on?
Sent from my HTC One X using xda app-developers app

ardabelati said:
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again
Click to expand...
Click to collapse
You can either flash the kernel, which can be found in the Android Development section, flashing the kernel is just like flashing a ROM, just install in Beastmode. Or you can upgrade your firmware to 2.15, the instructions are I'm the first post of the ROM thread.
Asking which ROM is best/favorite/most stable is against the rules so we can't answer that question.
When you say the phone keeps rebooting, does it ever make it into the OS or is it boot looping (showing the boot animation then starting over)?
Sent from my Evita

timmaaa said:
You can either flash the kernel, which can be found in the Android Development section, flashing the kernel is just like flashing a ROM, just install in Beastmode. Or you can upgrade your firmware to 2.15, the instructions are I'm the first post of the ROM thread.
Asking which ROM is best/favorite/most stable is against the rules so we can't answer that question.
When you say the phone keeps rebooting, does it ever make it into the OS or is it boot looping (showing the boot animation then starting over)?
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the reply
When you said that flashing kernel is the same as flashing ROM, I did it By going to TWRP and the press install and locate the zip file. Is this what should be done?
What is beast mode?
Sorry for the basic questions
Thanks

Yeah that's how you install the kernel. It must be done after you install the ROM. I kinda worded my reply a bit weird, sorry about that. Beastmode is the name of the kernel, you can find it here:
http://forum.xda-developers.com/showthread.php?t=2165880
Sent from my Evita

I did try to flash it through recovery but it always failed. Not sure why. I copied the kernel zip file into my phone sd and then I went to recovery and press the install and located the kernel zip file but still failed.
Sent from my HTC One XL using Tapatalk 2

Which recovery version are you using?
Sent from my Evita

Recovery is 2.6.3.
The process failed on not able to fine the MD5 file or something like that. We don't need to extract the Zip file do we?
Cheers

Disable md5 checking in settings. You never need to extract a kernel or ROM zip.
Sent from my Evita

timmaaa said:
Disable md5 checking in settings. You never need to extract a kernel or ROM zip.
Sent from my Evita
Click to expand...
Click to collapse
I have checked the setting in TWRP and nothing is ticked.
When I flash the zip, it is still saying "failed due to md5 does not exists".
I am not sure which should be address first but I now noticed that there is an error : "unable to locate storage device"
also came out.
When I plug my phone to PC I can see the storage but why it is saying "storage device not found" in TWRP?
Thanks

E:Error executing updater binary in zip

Anybody figure out how to fix this? I can find people having this problem flashing 4.4 but I can't flash anything. I've tried to flash mf1 firmware, a 4.3 carbon nightly, and a 4.3 pac nightly. All with the same results. Here is exactly what I did -
I flashed PhilZ recovery earlier on a earlier version of TWRP.
kept getting a "failed" in PhilZ
Flashed latest TWRP via Odin
Tried flashing the above mentioned zips all with the error message.
Restored my hyper drive rls16 backup (4.1.2)
Installed latest TWRP via goomanager app
Edit : my phone is flashed to PagePlus so I kinda have to be careful I'm afraid of using Odin to go back to stock/rooted but my luck that's what it'll take. When I get home I'm going to try it with a older version of TWRP that's the only other thing I can think to try.
Any suggestions or info is appreciated.

delete

anyone ? please ?

Supposedly the update binary here is generic, you could try replacing the one in the rom zip with it
http://forum.xda-developers.com/showthread.php?t=2492496
Sent from my SCH-I535 using XDA Premium 4 mobile app

I've tried CWM PhilZ and TWRP all latest versions, and still can't get rid of this.
I Cannot install any rom, whatsoever. I did manage to install a MF1 radio zip, but that's it. I can't install 4.3 or even 4.2 ..
I've replaced the update-binary inside the zips, and edited the update-script and removed the stuff used for recognizing the device, still no dice ..
I ended up flashing a full mf1 img via Odin and then used casual to root/unlock/recovery install - and I STILL get the error. Not sure where to go from here. Seems like nobody else is having this problem unless they're not on the latest recovery and trying to flash KitKat.
Thought I'd share the rest of my story ..
edit: I was able to restore a old backup of 1.7 carbon ...lol. better than nothing or a TW rom, that's for sure.

When you replaced the update binary did you get the same error or a different one? Also, have you tried flashing from internal and external SD?
Sent from my SCH-I535 using XDA Premium 4 mobile app

dpeeps74 said:
When you replaced the update binary did you get the same error or a different one? Also, have you tried flashing from internal and external SD?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry I didn't get a notification for this.
I did get the same error. I did get a error 6 once or twice but it was because I edited the update-script file and used word or word pad I downloaded note++ and it stopped and went back to error 7 :banghead:
Sent from my SCH-I535 using Tapatalk

cjmcsw87 said:
Sorry I didn't get a notification for this.
I did get the same error. I did get a error 6 once or twice but it was because I edited the update-script file and used word or word pad I downloaded note++ and it stopped and went back to error 7 :banghead:
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
OK, I have one for you to try, use the original rom zip (don't edit the update-script), when you flash in recovery and it failed, select boot and boot back into recovery, then reflash again. Try it with the latest TWRP 2.6.3.2.

SOLVED ! only took a week ...
I had been using an update-binary file that was posted in a thread.
I took the file from PhilZ recovery ( which I had been able to flash, just nothing else ) and used that one. Imagine that, it worked.
**DUH** :silly:

cjmcsw87 said:
SOLVED ! only took a week ...
I had been using an update-binary file that was posted in a thread.
I took the file from PhilZ recovery ( which I had been able to flash, just nothing else ) and used that one. Imagine that, it worked.
**DUH** :silly:
Click to expand...
Click to collapse
Nice, glad you have a happy ending!!

buhohitr said:
Nice, glad you have a happy ending!!
Click to expand...
Click to collapse
Me too buddy, let me tell ya ..
I appreciate the advice along the way. Thank you.
now I just have to decide if I want carbon or pac as my daily driver for awhile.. Carbon is what i've almost always used after I figured out how bloated and laggy TW is.. Best of all my PagePlus flash is perfectly fine, didn't have to add APN's or mess with anything else to get data to work.
I hope this thread helps somebody else.

I am having the same issue with HTC One.
Could you please let me know how you solved this. Maybe it can help with my device as well. had no luck in our threds..
Thank you

umka83 said:
I am having the same issue with HTC One.
Could you please let me know how you solved this. Maybe it can help with my device as well. had no luck in our threds..
Thank you
Click to expand...
Click to collapse
If you're getting a status 7 error you have to replace the update binary with the latest nightly from cm11 in anything you want to flash. The update binary is universal and will work on anything you want to flash. If it is throwing another error then this won't work.
This will probably only work with cwm or philz.

BadUsername said:
If you're getting a status 7 error you have to replace the update binary with the latest nightly from cm11 in anything you want to flash. The update binary is universal and will work on anything you want to flash. If it is throwing another error then this won't work.
This will probably only work with cwm or philz.
Click to expand...
Click to collapse
Hello, thanks for reply,
1) I am not getting a STATUS 7 error, only this one:
Code:
E: eror eexecuting updater binary in zip /sdcard/zipfilename.zip Error flashing zip /sdcard/zipfilename Updating partition details Failed
Could you please let me know how can I replace the update binary with the latest nightly from cm11? Do you need to open zip from latest Nities and put it into my ZIP?
2) I have tried both cwm or philz and I am getting this error
Code:
this package is for m7wlj devices this is dlx
My device is m7wlj for sure. But somehow recovery thinks it is DLX
THANK YOU

umka83 said:
Hello, thanks for reply,
1) I am not getting a STATUS 7 error, only this one:
Code:
E: eror eexecuting updater binary in zip /sdcard/zipfilename.zip Error flashing zip /sdcard/zipfilename Updating partition details Failed
Could you please let me know how can I replace the update binary with the latest nightly from cm11? Do you need to open zip from latest Nities and put it into my ZIP?
2) I have tried both cwm or philz and I am getting this error
Code:
this package is for m7wlj devices this is dlx
My device is m7wlj for sure. But somehow recovery thinks it is DLX
THANK YOU
Click to expand...
Click to collapse
It's a recovery version problem, so either update your recovery or use an older one until you find something that works.

Problem Solved
umka83 said:
Hello, thanks for reply,
1) I am not getting a STATUS 7 error, only this one:
Code:
E: eror eexecuting updater binary in zip /sdcard/zipfilename.zip Error flashing zip /sdcard/zipfilename Updating partition details Failed
Could you please let me know how can I replace the update binary with the latest nightly from cm11? Do you need to open zip from latest Nities and put it into my ZIP?
2) I have tried both cwm or philz and I am getting this error
Code:
this package is for m7wlj devices this is dlx
My device is m7wlj for sure. But somehow recovery thinks it is DLX
THANK YOU
Click to expand...
Click to collapse
After conducting my own research with this same problem I discovered a much simpler method of correcting the issue. When flashing KK roms with older versions of custom recoveries, the recoveries did not have sufficient instructions to to handle some of the file system changes in KK. I tried replacing the updater binaries from multiple ROMs to no avail. After about 24 hours of trial and error I managed to successfully flash Cyanogenmod cm-11-20140709-NIGHTLY-d801 and GAPPs aokp_gapps-kk-20140517 to my LG G2 D801. All that had to be done is to update TWRP from 2.6.3.2 to version 2.7.1. This version of TWRP had the necessary instructions to support a KK version custom ROM.

Good Job
Sent from my SM-G900F using XDA Free mobile app

Fixed
buhohitr said:
Nice, glad you have a happy ending!!
Click to expand...
Click to collapse
I had same issue, installed newest TWRP. Fixed! Used Odin to install.

I had the same issue as the OP. I was trying to flash a rom from the external SD card. I moved it to the Internal SD and it worked.
J

error executing updater binary

Hi Guys,
I have tried many of the ROMs available however, for the most part, I get this error "error executing updater binary" in TWRP. I have also tried CWM and Philz recovery. The only ROM that installs is CM11. Does any one know what is the issue? Anyone got a solution? Thanks.
Current Recovery: TWRP 2.7.1.1

I'm the only one experiencing this issue?

Specifically which ROMs have you tried?
Transmitted via Bacon

I've tried the following:
AOSP from the Oneplus homepage
AOSP flapped
mahdi-rom
Team GUMMY

Are you checking the md5 when you download?
Transmitted via Bacon

No, I did not. However, having said that, would it really be the case of corrupt downloads across multiple roms? As well, CM11 installs perfectly fine.
I'll do some checking now.

bill1clinton said:
No, I did not. However, having said that, would it really be the case of corrupt downloads across multiple roms? As well, CM11 installs perfectly fine.
I'll do some checking now.
Click to expand...
Click to collapse
It's possible, I'm just throwing out the usual causes of your problem. It wouldn't be the first time it's happened.
Transmitted via Bacon

Well, just re-downloaded AOSP from the oneplus homepage and flapped AOSP. I also checked their md5 hashes; they match. I will report back.

I'm getting this same message, except I'm getting it when trying to install the new OTA update. I'm rooted with custom recovery, but haven't flashed any ROM. After I download the update, I push "install update" and my phone reboots into TWRP to install the update, and then gives me the "error executing updater binary" error. I tried downloading the update manually off the web and installing it via TWRP on my own, but it gave me the same message. Not really sure what else to do at this point.

timmaaa said:
It's possible, I'm just throwing out the usual causes of your problem. It wouldn't be the first time it's happened.
Transmitted via Bacon
Click to expand...
Click to collapse
Just tried to flash both, both times I get the "error executing updater binary" error. I do not have the technical expertise to try to correct this.

Anyone else with any ideas?

Unzip the ROM that works and the ROM that doesn't with 7zip, then swap the update-binary from the working to the non. Rezip (set to store) then either sign the ROM or toggle SIG verification in recovery, then make nandroid, wipe clean, flash
By the way, what version do you have? 16 64? Chinese? Can you get bootloader info?

demkantor said:
Unzip the ROM that works and the ROM that doesn't with 7zip, then swap the update-binary from the working to the non. Rezip (set to store) then either sign the ROM or toggle SIG verification in recovery, then make nandroid, wipe clean, flash
By the way, what version do you have? 16 64? Chinese? Can you get bootloader info?
Click to expand...
Click to collapse
The ROM that works is CM11 nightly and the one that I would like to install is pure AOSP. Are you certain that their update binary files would/could be interchangeable?
And how to do you "set to store"? I use 7zip.
I have the international 64GB. And I am not sure how to check my bootloader.
I really do apologize for my newb-ness on this matter.

There shouldn't be an issue, but of course I can't promise as I don't know what specifically is going on in your case
When you choose zip, there you will have different compression options, choose store
Try
fastboot oem device-info
Write down output here
No worries, we all are noobs in our own ways

did anyone figure this out? im having the same issue trying to install lollipop roms

Same problem here
jlinn75 said:
did anyone figure this out? im having the same issue trying to install lollipop roms
Click to expand...
Click to collapse
Hi have same problem here.
my Bootloader is unlocked, I have phone rooted, I use last bacon twrp version. I already clean all phone.
I could install any rom, finally I found cm-11.0-XNPH44S-bacon-signed-fastboot.zip with fastboot.bat file that helped me to recover my phone.
I did all steps from all guys I searched, I can't know why I always appear error "error executing updater binary".
I tried cm-12-20150124-NIGHTLY-bacon.zip, I tried BlissPop-v1.8-bacon-OFFICIAL-20150123-2230.zip, all same error. I also tried to install original cm-11, same error.
I don't know what to do more or why? I checked Bootloader is unlocked.

viriatis said:
Hi have same problem here.
my Bootloader is unlocked, I have phone rooted, I use last bacon twrp version. I already clean all phone.
I could install any rom, finally I found cm-11.0-XNPH44S-bacon-signed-fastboot.zip with fastboot.bat file that helped me to recover my phone.
I did all steps from all guys I searched, I can't know why I always appear error "error executing updater binary".
I tried cm-12-20150124-NIGHTLY-bacon.zip, I tried BlissPop-v1.8-bacon-OFFICIAL-20150123-2230.zip, all same error. I also tried to install original cm-11, same error.
I don't know what to do more or why? I checked Bootloader is unlocked.
Click to expand...
Click to collapse
I get the exact same error, as you I can only flash CM-11, strange cause I was running Euphoria OS Lollipop!
Someone must know the cause!

sad problem
doe or die said:
I'm getting this same message, except I'm getting it when trying to install the new OTA update. I'm rooted with custom recovery, but haven't flashed any ROM. After I download the update, I push "install update" and my phone reboots into TWRP to install the update, and then gives me the "error executing updater binary" error. I tried downloading the update manually off the web and installing it via TWRP on my own, but it gave me the same message. Not really sure what else to do at this point.
Click to expand...
Click to collapse
I'm having exactly same problem. So is this common problem or what? I had multirom and xposed framework but after uninstalling them both I get the same error again. I hope this does not happen when we are getting the Lollipop-update. Sry for bad enklish.
Anyone help?

Please help me! Cant install any ROM on my OnePlus!

Hi Everyone!
Because of having issues i can´t fix on my OnePlus, i´m finally asking for some professional help here, as it´s getting more and more complicated and i don´t want to ruin my phone.
What was my plan?
Installing CM11S 44S on my OPO, which had the 05Q Version as factory setting.
Also i wanted to install a franco kernel.
I hoped, if i do both steps successfully, my OPO will have a good battery life (44S seemed to be the most efficient version, according to some forums).
What did i do so far?
First i set up an adb backup for my data, but not for the OS. However, i installed SDK plus tools and drivers.
Next step was installing a new recovery, which is able to flash a new version of CM11S, so i set up TWRP with fastboot, which means my device is "unlocked" now.
Everything worked well so far, i also made an backup in TWRP.
The problem:
I wanted to reboot my OPO at some point and TWRP asked me for rooting my device. Accidentally i swiped over so it started rooting process, but i didn´t want to root it, so i immediately shut the device down.
By now TWRP recovery/fastboot is working, but my OS 05Q is lost and i can´t install a new ROM because im getting the Report:
--
Checking for MD5 file...
Skipping MD5 check; no MD5 file found
Error flashing zip /<path to .zip file>
--
Can anyone help me to get 05Q back or the 44S with the franco kernel?
I know there might be some other threads that deal with similar problems, but actually none of them helped me so far. For example: do i need a fastboot image or signed flashable zips (which i have)? In which order do i install the kernel and the ROM?
Some Information:
I can access my device via fastboot and my OPO is also shown as a adb device on my MAC.
When starting in TWRP, i can also access the device in USB Mode, transfering files is also possible.
I´m not really competent with android modding or programming, so i will need some noob-friendly answers, but i bet you guys know how to help me out here.
Thank you very much for your help, i really don´t know what to do anymore.
EDIT:
I found out how to place a md5 file to the referring version, but it still sais: MD5 does not match.
I´m so done with it right now that i wish i had my OPO back as it was few days ago.

Well, i cant really help here as i have not face this problem but ur mistake was that u Immediately shut the device down the moment it was installing root. It may have corrupted the partitions of the phone and left it at that state, so maybe restoring the partitions of that section may help. Like i said im not knowledgeable about this

Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471

Heisenberg said:
Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.

Thyrix said:
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.
Click to expand...
Click to collapse
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.

Heisenberg said:
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.
Click to expand...
Click to collapse
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?

Thyrix said:
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?
Click to expand...
Click to collapse
You need the fastboot images.

Heisenberg said:
You need the fastboot images.
Click to expand...
Click to collapse
Got stuck at step 2: It Terminal said error: cannot determine image filename for sbl1.mbn - although the name is correct and the file is in the correct folder :/
EDIT:
Fixed it, forgot to type sbl1 2 times, im sorry
And it worked, thank you sooooo much!!!

Facing ROM installation problems and unable to flash magisk

Hello
Need kelp here
Problem 1:
When I try to install any Android 10 based ROM on my Violet, it ends up with an error 7 saying either " are you installing onto the correct device" or sometimes "requires firmware version #*#*#* even though I flash the latest Chinese firmware everytime I flash a ROM.
Obviously, I'm able to bypass this problem by deleting the 2 assert lines in it's script using note++
I also flash fcrypt disabler after ROM flashing.
But still OTA updates keep failing and leads to boot loops
Problem 2:
OK,
now am in ROM, I try to flash magisk now, that leads to bootloop too
So can't flash root
Any solution?
Also I use orangefox recovery

mj25m said:
...
Problem 1:
When I try to install any Android 10 based ROM on my Violet, it ends up with an error 7 saying either " are you installing onto the correct device" or sometimes "requires firmware version #*#*#* even though I flash the latest Chinese firmware everytime I flash a ROM.
Click to expand...
Click to collapse
ROM installers that have that kind of assert are usually looking for a specific firmware version. Just flashing "the latest Chinese firmware" does not mean that you are flashing the specific version that the ROM's installer is looking for.
mj25m said:
....I also flash fcrypt disabler after ROM flashing.
Click to expand...
Click to collapse
Why?
mj25m said:
.But still OTA updates keep failing and leads to boot loops
Click to expand...
Click to collapse
Your intervention, which I just queried above, could easily cause that. Secondly, there is a specific ROM (which will remain nameless) which forces you to use its own recovery for everything - including and especially OTA updates - and if you try using another recovery, heaven help you. If you have that ROM, dump it!
mj25m said:
.Problem 2:
OK,
now am in ROM, I try to flash magisk now, that leads to bootloop too
So can't flash root
Any solution?
Click to expand...
Click to collapse
Ask your ROM dev. Or dump the ROM.

DarthJabba9 said:
ROM installers that have that kind of assert are usually looking for a specific firmware version. Just flashing "the latest Chinese firmware" does not mean that you are flashing the specific version that the ROM's installer is looking for.
Why?
Your intervention, which I just queried above, could easily cause that. Secondly, there is a specific ROM (which will remain nameless) which forces you to use its own recovery for everything - including and especially OTA updates - and if you try using another recovery, heaven help you. If you have that ROM, dump it!
Ask your ROM dev. Or dump the ROM.
Click to expand...
Click to collapse
Like I said, I'm facing the same kind of problems on all kind of ROMs that I flash
I don't know if I've messed up my Violet but it seems to be like a permanent issue.
I flash fcrypt 'cause one day, when i was without my senses, I flashed a ROM without wiping the previous ROM's encrypted storage and I think maybe tht it was since tht day on tht I started to face these issue

mj25m said:
Hello
Need kelp here
Problem 1:
When I try to install any Android 10 based ROM on my Violet, it ends up with an error 7 saying either " are you installing onto the correct device" or sometimes "requires firmware version #*#*#* even though I flash the latest Chinese firmware everytime I flash a ROM.
Obviously, I'm able to bypass this problem by deleting the 2 assert lines in it's script using note++
I also flash fcrypt disabler after ROM flashing.
But still OTA updates keep failing and leads to boot loops
Problem 2:
OK,
now am in ROM, I try to flash magisk now, that leads to bootloop too
So can't flash root
Any solution?
Also I use orangefox recovery
Click to expand...
Click to collapse
For this go to File Manager, select data then change the file system from f2fs to ext4. Then the error 7 issue will get solved.
Note: This will format all internal data.
Go ahead! All the Best! Happy Flashing!!:laugh:

Flash 9.9.3 firmware version .. most of the roms require that specific version. Then flash rom ... Also flash magisk after first boot not right after you flash rom this might help !