Related
Download CWM Recovery.7z from attachments. Extract Recovery.tar
Download Superuser-3.1.3-arm-signed.7z (or newer from http://androidsu.com/superuser/). Extract Superuser-3.1.3-arm-signed.zip and copy it to your SD card (internal or external).
Put your phone in Download mode. Flash Recovery.tar using Odin.
Put your phone in Recovery mode. Flash Superuser-3.1.3-arm-signed.zip from recovery
Reboot and ready
Thanks developers!
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
I didn't needed. The other method posted makes the S7500L keep rebooting into recovery. So, I flashed stock firmware (S7500LVJLH1) with Odin and start over again, but same result.
I'd flashed again stock firmware and just flash recovery with Odin, then just write Superuser from recovery.
I hadn't time to verify if the problem was with boot.tar or with files that are installed in recovery mode by .bat file.
Sent from my GT-P1010 using xda app-developers app
شكراااااااااااااااااااااااااااااااا
thanxssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Can i use this Superuser 3.1.3-arm.zip for rooting Galaxy Ace S5830 ??
Sent from my GT-S5830 using xda premium
Yeah... For any phone with ARM CPU core
Sent from my GT-I9100 using xda app-developers app
issues after flashing gt-s7500T
lokeshsaini94 said:
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
Click to expand...
Click to collapse
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Android System Recovery (3e) problem
i flashed "recovery.tar" as PDA via Odin3...then went into recovery mod but it say "Android System Recovery (3e)"..i think its Samsung's default recovery ... so where is CWM???
hi guys!
i have a problem with my ace plus and i have to bring it to a warranty center.. so i have to restore the stock rom and un-root.. any help?
is there a guide to do it? do you know where i can find the stock rom?
thanks a lot
If I root my phone, any advantage in the new root between old 1....
Can someone help me?
My Galaxy Ace Plus (S7500) doesn't want to boot in download mode
Thanks guys, great work
However, my Ace plus is GT - S7500W (London 2012 limited edition)
Is there anyway to root it?
Thanks so much!
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
kol12 said:
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
Click to expand...
Click to collapse
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
farodriguez said:
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
Click to expand...
Click to collapse
Thanks. So does installing stock firmware not write any files to the data partition of android? What about the apps that are included in stock firmware sms app, contacts,call logs, maps etc, will those apps data be lost with installing stock firmware?
---------- Post added at 11:27 AM ---------- Previous post was at 11:23 AM ----------
The recovery.img you have is larger than the stock firmware recovery.img. Does this write more data somewhere?
here is Android 4.1.2 for Galaxy ace plus working
http://forum.xda-developers.com/show...5#post38450355
fido747 said:
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Click to expand...
Click to collapse
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Corsario_Negro said:
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Click to expand...
Click to collapse
Hi i have the same problem and the solution is flash this http://forum.xda-developers.com/showthread.php?t=2255561
i used odin, and works perfect.
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
vasilisaerox said:
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
Click to expand...
Click to collapse
Just flashed recovery and i'm having the same issue. Original 2.3.6 installed never touched.
Hi Guys,
3 Days before i rooted my phone and installed the latest jellybean update from droidiser website(Title: How to Update Micromax A110 to offical jellybean) Sorry i couldn't able to post the website link. From this page i installed the clockworkmod flashablezip update.
After installing this rom i couldn't able to boot in recovery mode. As the instruction said in that page i have to clear the dalvik cache so i rebooted my phone and pressed the volume up, down and power button (the recovery options appears like press volume up to recovery mode, press volume down to factory mode). when i press the volume up button to go to the recovery mode a green android logo image or something appears and blueline processing under it and then my mobile rebooted and starts as fresh each and every time it happen like this i have tried this more than 10 times. After loosing hope in this method i installed Rom manager and when i opened it says please install custom recovery and gave the option to install and cancel. i pressed the install button in the next it show already clockwork mod is installed please choose one and i choosed clockworkmode 3.x+ something. after that i try to backup my current version by pressing the backup option in rom manager again the above process started and again it resets my jb. I can able to go to factory mode by pressing the volume down button. the only thing i couldn't able to do is go into recovery mode and take a backup or install a new rom. Please anyone help me.
srini155 said:
Hi Guys,
3 Days before i rooted my phone and installed the latest jellybean update from droidiser website(Title: How to Update Micromax A110 to offical jellybean) Sorry i couldn't able to post the website link. From this page i installed the clockworkmod flashablezip update.
After installing this rom i couldn't able to boot in recovery mode. As the instruction said in that page i have to clear the dalvik cache so i rebooted my phone and pressed the volume up, down and power button (the recovery options appears like press volume up to recovery mode, press volume down to factory mode). when i press the volume up button to go to the recovery mode a green android logo image or something appears and blueline processing under it and then my mobile rebooted and starts as fresh each and every time it happen like this i have tried this more than 10 times. After loosing hope in this method i installed Rom manager and when i opened it says please install custom recovery and gave the option to install and cancel. i pressed the install button in the next it show already clockwork mod is installed please choose one and i choosed clockworkmode 3.x+ something. after that i try to backup my current version by pressing the backup option in rom manager again the above process started and again it resets my jb. I can able to go to factory mode by pressing the volume down button. the only thing i couldn't able to do is go into recovery mode and take a backup or install a new rom. Please anyone help me.
Click to expand...
Click to collapse
Download ROM manager from play store...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
problem yet not solved!
Pranesh Desai said:
Download ROM manager from play store...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Click to expand...
Click to collapse
Hi, i have exactly d same problem but in addition to dat a few more lol,,,
Not only can i boot into recovery but also after seeing my device reboot about 15 times i unrooted my device hoping to root it again... but this tym it wont root n gives me 'permission denied' error while copying files onto my system in bin4ry script for root.
Also now my play store gives me a really wierd error showing 'cant retrieve data' something error...
srini155 said:
Hi Guys,
3 Days before i rooted my phone and installed the latest jellybean update from droidiser website(Title: How to Update Micromax A110 to offical jellybean) Sorry i couldn't able to post the website link. From this page i installed the clockworkmod flashablezip update.
After installing this rom i couldn't able to boot in recovery mode. As the instruction said in that page i have to clear the dalvik cache so i rebooted my phone and pressed the volume up, down and power button (the recovery options appears like press volume up to recovery mode, press volume down to factory mode). when i press the volume up button to go to the recovery mode a green android logo image or something appears and blueline processing under it and then my mobile rebooted and starts as fresh each and every time it happen like this i have tried this more than 10 times. After loosing hope in this method i installed Rom manager and when i opened it says please install custom recovery and gave the option to install and cancel. i pressed the install button in the next it show already clockwork mod is installed please choose one and i choosed clockworkmode 3.x+ something. after that i try to backup my current version by pressing the backup option in rom manager again the above process started and again it resets my jb. I can able to go to factory mode by pressing the volume down button. the only thing i couldn't able to do is go into recovery mode and take a backup or install a new rom. Please anyone help me.
Click to expand...
Click to collapse
Try flashing Stock ROM V2 back to your phone and then perform a factory/data reset.
Then root it and install CWMR through MobileUncle tool.
Now check if you are able to get in to CWMR or not. If yes, then you are done. You may now install any JB based custom ROM of your choice including an official V3 released by Micromax.
Please share your result here for others to refer (whatever it may be)
It's not working buddy
Pranesh Desai said:
Download ROM manager from play store...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Click to expand...
Click to collapse
Hi i followed your instruction and ROM manager flashed the clockwork mod and then i used the mobile uncle tool to and clicked the recovery update and then micromax start up logo appears and turned off. I manually pushed the 3 buttons and the recovery options appeared, i clicked the volume up button. Now the mobile switched off i switched on again and tried to install the suvi stock ROM by using ROM manager now i pressed the install from SD card and located my suvi rom zip file and it says reboot and install when i click this option micromax "superfone canvas 2" logo appears and turned off. I even tried to reboot from mobile uncle but it's not booting in recovery mode it again switching off. After that i have to manually switch on my mobile again. Why this happening to me what i do wrong, Please help me i am very desperate.
How to install this stock rom 2 if i am not able to go into the recovery mode?
rajenpurohit said:
Try flashing Stock ROM V2 back to your phone and then perform a factory/data reset.
Then root it and install CWMR through MobileUncle tool.
Now check if you are able to get in to CWMR or not. If yes, then you are done. You may now install any JB based custom ROM of your choice including an official V3 released by Micromax.
Please share your result here for others to refer (whatever it may be)
Click to expand...
Click to collapse
Hi,
I don't think it is possible to flash my stock rom v2 because how i am going to do this if i want to go install this rom again i need to go to recovery mode right. I am not able to go to recovery mode is there any-other way to install the stock rom v2. Please tell me, i would like to try that also.
srini155 said:
Hi Guys,
3 Days before i rooted my phone and installed the latest jellybean update from droidiser website(Title: How to Update Micromax A110 to offical jellybean) Sorry i couldn't able to post the website link. From this page i installed the clockworkmod flashablezip update.
After installing this rom i couldn't able to boot in recovery mode. As the instruction said in that page i have to clear the dalvik cache so i rebooted my phone and pressed the volume up, down and power button (the recovery options appears like press volume up to recovery mode, press volume down to factory mode). when i press the volume up button to go to the recovery mode a green android logo image or something appears and blueline processing under it and then my mobile rebooted and starts as fresh each and every time it happen like this i have tried this more than 10 times. After loosing hope in this method i installed Rom manager and when i opened it says please install custom recovery and gave the option to install and cancel. i pressed the install button in the next it show already clockwork mod is installed please choose one and i choosed clockworkmode 3.x+ something. after that i try to backup my current version by pressing the backup option in rom manager again the above process started and again it resets my jb. I can able to go to factory mode by pressing the volume down button. the only thing i couldn't able to do is go into recovery mode and take a backup or install a new rom. Please anyone help me.
Click to expand...
Click to collapse
Same problem happened with me ...I am waiting for a concrete answer.
srini155 said:
Hi,
I don't think it is possible to flash my stock rom v2 because how i am going to do this if i want to go install this rom again i need to go to recovery mode right. I am not able to go to recovery mode is there any-other way to install the stock rom v2. Please tell me, i would like to try that also.
Click to expand...
Click to collapse
Yes, you can flash it with SP Flash Tool and Stock V2 ROM file from any computer/laptop running on Windows 7/XP. Doesn't detect device on Windows 8. Refer to the attached file.
Thanks for your help
rajenpurohit said:
Yes, you can flash it with SP Flash Tool and Stock V2 ROM file from any computer/laptop running on Windows 7/XP. Doesn't detect device on Windows 8. Refer to the attached file.
Click to expand...
Click to collapse
Hi
Thanks for your help i will try this i have one doubt, instead of installing the same stock rom v2 can i install the suvi rom helios or jupiter and i want another help which one is best rom suvi ver 5 or suvi ver 6.
well i have tried flashing stock v2 from sp flash tool with stock recovery but it doesnt work. i am coming from jmpv8
It is advisable to First flash stock Rom V2 and then root your phone and then install cwm recovery.
After that you can install any Rom. Try LEWA ROM, it is not only faster but also stable and extends battery a lot.
Sent from my Micromax A110 using xda app-developers app
---------- Post added at 04:09 PM ---------- Previous post was at 04:08 PM ----------
Could you please elaborate it further? What didn't work?
Sent from my Micromax A110 using xda app-developers app
I have stock rom v2 backup
rajenpurohit said:
It is advisable to First flash stock Rom V2 and then root your phone and then install cwm recovery.
After that you can install any Rom. Try LEWA ROM, it is not only faster but also stable and extends battery a lot.
Sent from my Micromax A110 using xda app-developers app
---------- Post added at 04:09 PM ---------- Previous post was at 04:08 PM ----------
Could you please elaborate it further? What didn't work?
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I have doubt, i have backed up my stock ROM using clockwork mod before updating to JB, is it possible to use that in sp flash tool or i have to manually download the stock ROM and use it. Moreover, please clarify this i am a hardcore gamer i used to play games in both laptop and mobile. Can you suggest me any rom that is good for gaming. I heard that suvi v5 is good for game is it true shall i use it. Please advice me.
srini155 said:
Hi,
I have doubt, i have backed up my stock ROM using clockwork mod before updating to JB, is it possible to use that in sp flash tool or i have to manually download the stock ROM and use it. Moreover, please clarify this i am a hardcore gamer i used to play games in both laptop and mobile. Can you suggest me any rom that is good for gaming. I heard that suvi v5 is good for game is it true shall i use it. Please advice me.
Click to expand...
Click to collapse
No, you won't be able to flash your backup files from SP flash tool.
For Gaming, try using any ROM which is doesn't eat RAM just for good look and feel. There are many such available on this forum.
Ensure the whichever ROM you install, is V6 supercharged.
Try JMP V9.0, it will serve your purpose.
Thanks for that, i will try it.
Mmx 110 (recovery problem)
When I tried to reboot my canvas 2, the screen freezes in "SUPERFONE CANVAS 2" wordings. I tried again and again to reboot it, but the same thing happens over and over. Please help me.
Is this the first reboot after having installed ROM? If yes then leaves your phone as it is and it will come up after few minutes.
If this is not the case, you can solve this provided that you have CWM Recovery.
Sent from my Samsung GT-S9081 using xda app-developers app
---------- Post added at 11:22 PM ---------- Previous post was at 11:18 PM ----------
Yes you can install any ROM. But for that, you need to first root your phone and install latest CWM recovery. Then you can download and install any Rom.
SUVI has released the latest ROM, try it.
Sent from my Samsung GT-S9081 using xda app-developers app
rajenpurohit said:
It is advisable to First flash stock Rom V2 and then root your phone and then install cwm recovery.
After that you can install any Rom. Try LEWA ROM, it is not only faster but also stable and extends battery a lot.
Sent from my Micromax A110 using xda app-developers app
---------- Post added at 04:09 PM ---------- Previous post was at 04:08 PM ----------
Could you please elaborate it further? What didn't work?
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Hi Rajen,
Thanks for your help ..yesterday i installed stock v2 Rom via SP tools then rooted my phone and installed cwm recovery. Everthing was fine but when I installed custom ROM JMP v9 I realized that the proximity sensor is not working that means the phone does not go blank when i receive or make a call.
Could you please help me in resolving the proximity issue.
Thank you.
Nutankumar said:
Hi Rajen,
Thanks for your help ..yesterday i installed stock v2 Rom via SP tools then rooted my phone and installed cwm recovery. Everthing was fine but when I installed custom ROM JMP v9 I realized that the proximity sensor is not working that means the phone does not go blank when i receive or make a call.
Could you please help me in resolving the proximity issue.
Thank you.
Click to expand...
Click to collapse
Hi, i am also on JMP V9 and have never faced this issue. I will have to look for the possible solution. Will update you soon.
Sent from my Galaxy Nexus using xda app-developers app
Damn, I just began experienced the exact same problem as the OP, however, I experienced it after quite a few reboots (I installed the JB about a week ago) unlike the OP
I was gonna start a new thread but noticed this one and hence posting my query here...
1) So guys, I just need to flash the Stock ROM V2 using SP tools, root my phone, Install the official MMX JB update and that'll do right?
Does my phone still remain rooted afterwards?
2) Secondly, is it possible to retrieve those apps and data that got wiped off my phone after it reseted?
I did save a nandroid backup once via CWM but that was long ago and quite a few new apps were installed after that
Thanks
BTW, somebody should report the bad release... What did droidser put in that damned thing?
Hi,
Thanks for your replay, it's worked i installed a new ROM but i have been facing some issues in Suvi 6 Rom. I will post it in SUVI Q&A Thread. You tole me to install JMP v9 Rom but i was afraid to install that because in their home thread they have given separate patches for apps and some instruction on how to install that ROM etc... Those thinks confused so i installed suvi rom v6.Thanks again for your help.
Hello,
I rooted my phone the day I got it and flashed TWRP on it
I installed the 3 OTA updates and thus lost root+(unfortunately) my recovery.
Therefor today I tried installing my recovery again.
(talking about this one: http://forum.xda-developers.com/showthread.php?t=2766186)
After I installed it I got into a bootloop, I've tried the newer version too now.
After that I tried putting the new franco kernel on it(r14)... No succes.
Can anyone recommend what to do now?
(I can not enter recovery..)
Please help me
I was thinking, if the new OTA update appears on cyanogenmods site.
If I download it and then only flash the kernel and recovery with fastboot, will that work?
I really don't want to lose all my data!
Did you untick Update CM Recovery in developer settings after installing TWRP?
Sent from my LG-F400S using XDA Free mobile app
Hello all, Please read my problem and reply if you have any idea, Any help wil be appreciated
I am new in world of rooting and custom ROMs. I rooted my Karbonn A15+ successfully and taken Nandroid backup using Online Nandroid backup app. I tried to install CMW 5.0.2.8 recovery to my phone using Mobile Uncle tools. But after rebooting it just showed black screen for sometime and then booted normally. But Now the problem occurs, My phone cant detect any of my 2 sims, whereas they are working in other phones. I flashed my stock recovery using mobile uncle tools again nd it got flashed successfully but no sim detection though. Also, After that i tried to install TWRP and Carliv touch recovery but they showd same response as CMW, then I again flashed back to stock recovery.
Also, My phone Stock ROM is not available anywhere on net, Only Karbonn A15 Rom available which I cant be able to install using android stock recovery. I am stuck now, Can anyone help me so that my phone can detect sim. Pleas, Any help will be appreciated. Thanks for your time.
rishab951 said:
Hello all, Please read my problem and reply if you have any idea, Any help wil be appreciated
I am new in world of rooting and custom ROMs. I rooted my Karbonn A15+ successfully and taken Nandroid backup using Online Nandroid backup app. I tried to install CMW 5.0.2.8 recovery to my phone using Mobile Uncle tools. But after rebooting it just showed black screen for sometime and then booted normally. But Now the problem occurs, My phone cant detect any of my 2 sims, whereas they are working in other phones. I flashed my stock recovery using mobile uncle tools again nd it got flashed successfully but no sim detection though. Also, After that i tried to install TWRP and Carliv touch recovery but they showd same response as CMW, then I again flashed back to stock recovery.
Also, My phone Stock ROM is not available anywhere on net, Only Karbonn A15 Rom available which I cant be able to install using android stock recovery. I am stuck now, Can anyone help me so that my phone can detect sim. Pleas, Any help will be appreciated. Thanks for your time.
Click to expand...
Click to collapse
First I want you to advice have a good knowledge what you are doing unless u will be stuck around every where..
clearly wipe all data and flash stock rom and try if it works.
May be there is a problem with baseband..
Flash the stock and if you are unable to make it work then may be you have to go to Costumer Care..
Thanks
Thanx
Thanx for you reply, but Problem is Stock ROM is not available for my Mobile model. And the customer care of Karbonn is very bad. I will try or otherwise go to any repair shop Thanx for your time !
Post by Dagobert on Tue Feb 24, 2015 9:08 pm
I was trying to install a custom rom on my phone yesterday. I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
XDA Visitor said:
Post by Dagobert on Tue Feb 24, 2015 9:08 pm
I was trying to install a custom rom on my phone yesterday. I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
Click to expand...
Click to collapse
As IDK what kind of backup you made on the "stock" recovery, you should try to flash a compatible ROM for your device.
Have a look at this one: Xperia Honami ROM For all Mediatek 6572.
But you need to boot into the custom recovery for flashing it.
Next time create the backup with CWM or TWRP recovery. Then you can restore it in the corresponding recovery again.
Thread closed. Thank you.